MIC2941AWU-TR - MICROCHIP TECHNOLOGY

RCWPM (Military M/D55342)

www.vishay.com Vishay Dale

Revision: 10-Mar-17 1Document Number: 31010

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Thick Film Chip Resistors, Military / Established Reliability

MIL-PRF-55342 Qualified, Type RM

FEATURES

• Fully conforms to the requirements of

MIL-PRF-55342

• Established reliability - verified failure rate; M, P, R, U, S,

V, and T levels

• Construction is sulfur impervious against a high sulfur

environment (ASTM B 809-95 test method)

• 100 % group A screening per MIL-PRF-55342

• Termination style B - tin / lead wraparound over nickel

barrier

• Operating temperature range is -65 °C to +150 °C

• For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale’s

RCWPM Jumper (Military M32159) datasheet

(www.vishay.com/doc?31028)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

MATERIAL SPECIFICATIONS

Resistive element Ruthenium oxide

Encapsulation Epoxy

Substrate 96 % alumina

Termination Solder-coated nickel barrier

Solder finish Tin / lead solder alloy

STANDARD ELECTRICAL SPECIFICATIONS

VISHAY DALE

MODEL

MIL-PRF-55342

STYLE

MIL

SPEC.

SHEET

TERM. CASE

SIZE

POWER

RATING

P70 °C

MAX.

WORKING

VOLTAGE (1)

RESISTANCE

RANGE



TOLERANCE

± %

TEMPERATURE

COEFFICIENT (2)

± ppm/°C

RCWPM-0502,

RCWPM-0502-98 RM0502 01 B 0502 0.05 40

1 to 9.1 2, 5, 10 200, 300

10 to 22M 1, 2, 5, 10 100, 200, 300

10 to 10M 0.5 100, 200, 300

RCWPM-550,

RCWPM-550-98 RM0505 02 B 0505 0.125 40

1 to 9.1 2, 5, 10 200, 300

10 to 22M 1, 2, 5, 10 100, 200, 300

10 to 10M 0.5 100, 200, 300

RCWPM-5100,

RCWPM-5100-98 RM1005 03 B 1005 0.20 75

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-5150,

RCWPM-5150-98 RM1505 04 B 1505 0.15 125

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-7225,

RCWPM-7225-98 RM2208 05 B 2208 0.225 175

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-575,

RCWPM-575-98 RM0705 06 B 0705 (3) 0.15 50

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-1206,

RCWPM-1206-98 RM1206 07 B 1206 0.25 100

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-2010,

RCWPM-2010-98 RM2010 08 B 2010 0.80 150

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-2512,

RCWPM-2512-98 RM2512 09 B 2512 1.0 200

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-1100,

RCWPM-1100-98 RM1010 10 B 1010 0.50 75

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-0402,

RCWPM-0402-98 RM0402 11 B 0402 0.05 30

1 to 9.1 2, 5, 10 200, 300

10 to 22M 1, 2, 5, 10 100, 200, 300

10 to 10M 0.5 100, 200, 300

RCWPM (Military M/D55342)

www.vishay.com Vishay Dale

Revision: 10-Mar-17 2Document Number: 31010

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

• DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as

follows:

This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg

(1) Continuous working voltage shall be or maximum working voltage, whichever is less

(2) Characteristics: K = ± 100 ppm/°C; L = ± 200 ppm/°C; M = ± 300 ppm/°C

(3) MIL case size 0705 and EIA case size 0805 are dimensionally the same

Notes

• For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543)

(1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the

ESD pack codes are an optional type of packaging

(2) Failure rates U and V require group A and B inspection ran on each production lot

(3) Add a “D” after the packaging code at the end of the global part number to specify Vishay Dale Thick Film product with a tolerance of 0.5 %

(4) MIL spec option 1, 2, and 3 part marking is not offered for the slash sheet 01, 02, 11, and 13 sizes

RCWPM-0603,

RCWPM-0603-98 RM0603 12 B 0603 0.10 50

1 to 5.1 2, 5, 10 200, 300

5.6 to 22M 1, 2, 5, 10 100, 200, 300

5.62 to 10M 0.5 100, 200, 300

RCWPM-0302,

RCWPM-0302-98 RM0302 13 B 0302 0.04 15

1 to 9.1 2, 5, 10 200, 300

10 to 22M 1, 2, 5, 10 100, 200, 300

10 to 10M 0.5 100, 200, 300

DSCC DRAWING

NUMBER

VISHAY DALE

MODEL TERM.

POWER RATING

P70 °C

RES. RANGE



RES. TOL.

± %

TEMP. COEF.

± ppm/°C

MAX. WORKING

VOLTAGE (1)

07009 RCWP-0201 B 0.05 10 to 46.4

47 to 1M 1, 5 200

100 30

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M55342M02B10E0RWB (preferred part number format)

MIL

STYLE CHARACTERISTICS SPEC.

SHEET

TERMINATION

STYLE

VALUE AND

TOLERANCE

FAILURE

RATE PACKAGING

(1)

SPECIAL

D55342

applies to

Style 07

(RM1206)

only.

M55342

applies to

all other

styles.

K = 100 ppm

L = 200 ppm

M = 300 ppm

(see Standard

Electrical

Specifications

table)

B = pre-tinned

nickel barrier,

wraparound

(see Tolerance

and Multipliers

table)

C = non-ER

M = 1.0 %/1000 h

P = 0.1 %/1000 h

R = 0.01 %/1000 h

U = 0.01 %/1000 h (2)

S = 0.001 %/1000 h

V = 0.001 %/1000 h (2)

T = space level

TP =

tin / lead,

T/R (full)

= tin / lead,

T/R (full), w/ESD

= tin / lead, T/R

single lot date code

= tin / lead,

T/R (1000 pieces)

= tin / lead, T/R

(1000 pieces), w/ESD

= tin / lead,

waffle tray

= tin / lead,

waffle tray,

w/ESD

= tin / lead,

waffle tray,

single lot date code

= tin / lead,

T/R (500 pieces)

= tin / lead, T/R

(500 pieces), w/ESD

= tin / lead,

T/R (300 pieces)

= tin / lead, T/R

(300 pieces), w/ESD

Blank =

standard

(dash number)

(up to 1 digits)

D = 0.5 %

tolerance (3)

S =

space level

w/option 1 part

marking (-97) (4)

T =

space level (-98)

2 =

option 1

part marking

(-20) (4)

3 =

oiptions 2 and 3

part marking

(-30) (4)

Historical Part Numbering: M55342M02B10E0R (will continue to be accepted)

M55342 M 02 B 10E0 R WB

MIL

STYLE CHARACTERISTICS SPEC. SHEET TERMINATION

STYLE

VALUE AND

TOLERANCE

FAILURE

RATE

PACKAGING

CODE

STANDARD ELECTRICAL SPECIFICATIONS

VISHAY DALE

MODEL

MIL-PRF-55342

STYLE

MIL

SPEC.

SHEET

TERM. CASE

SIZE

POWER

RATING

P70 °C

MAX.

WORKING

VOLTAGE (1)

RESISTANCE

RANGE



TOLERANCE

± %

TEMPERATURE

COEFFICIENT (2)

± ppm/°C

P x R

55342M02MB10E0R W B

RCWPM (Military M/D55342)

www.vishay.com Vishay Dale

Revision: 10-Mar-17 3Document Number: 31010

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RESISTANCE TOLERANCE AND MULTIPLIERS

TOLERANCE

MULTIPLIER VALUE

RANGE ()

± 0.5 % ± 1 % ± 2 % ± 5 % ± 10 %

W D G J M 1 1 to 9xx

Y E H K N 1000 1K to 9xxK

Z F T L P 1 000 000 1M to 22M

Examples:



38W8 = 38.8  ± 0.5 %

10Y0 = 10 k ± 0.5 %

988W = 988  ± 0.5 %

2Z13 = 2.13 M ± 0.5 %

11D3 = 11.3 ± 1 %

10E0 = 10 k ± 1 %

332D = 332  ± 1 %

2F21 = 2.21 M ± 1 %

51G0 = 51 ± 2 %

10H0 = 10 k ± 2 %

33H0 = 33 k ± 2 %

22T0 = 22 M ± 2 %

15J0 = 15  ± 5 %

10K0 = 10 k ± 5 %

560K = 560 k ± 5 %

8L20 = 8.2 M ± 5 %

10M0 = 10  ± 10 %

10N0 = 10 k ± 10 %

2P70 = 2.7 M ± 10 %

8P20 = 8.2 M ± 10 %

DIMENSIONS in inches (millimeters)

VISHAY DALE

MODEL

MIL-PRF-55342

STYLE

MIL

SPEC.

SHEET

(LENGTH)

(WIDTH)

(HEIGHT)

(TOP TERM)

(BOTTOM TERM)

RCWPM-0502 RM0502 01 0.055 ± 0.005

(1.40 ± 0.13)

0.023 ± 0.003

(0.58 ± 0.08)

0.015 ± 0.003

(0.38 ± 0.08)

0.010 ± 0.005

(0.25 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-550 RM0505 02 0.055 ± 0.005

(1.40 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.010 ± 0.005

(0.25 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5100 RM1005 03 0.105 ± 0.005

(2.67 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-5150 RM1505 04 0.155 ± 0.005

(3.94 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-7225 RM2208 05 0.230 ± 0.005

(5.84 ± 0.13)

0.075 ± 0.005

(1.91 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-575 RM0705 06 0.080 ± 0.005

(2.03 ± 0.13)

0.050 ± 0.005

(1.27 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.016 ± 0.008

(0.41 ± 0.20)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-1206 RM1206 07 0.125 ± 0.005

(3.18 ± 0.13)

0.063 ± 0.005

(1.60 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-2010 RM2010 08 0.197 ± 0.006

(5.00 ± 0.15)

0.098 ± 0.005

(2.49 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-2512 RM2512 09 0.250 ± 0.005

(6.35 ± 0.13)

0.124 ± 0.005

(3.15 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

RCWPM-1100 RM1010 10 0.105 ± 0.005

(2.67 ± 0.13)

0.100 ± 0.005

(2.54 ± 0.13)

0.020 ± 0.005

(0.51 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0402 RM0402 11 0.039 ± 0.003

(0.99 ± 0.08)

0.020 ± 0.003

(0.51 ± 0.08)

0.013 ± 0.003

(0.33 ± 0.08)

0.010 ± 0.005

(0.25 ± 0.13)

0.010 ± 0.005

(0.25 ± 0.13)

RCWPM-0603 RM0603 12 0.063 ± 0.005

(1.60 ± 0.13)

0.032 ± 0.005

(0.81 ± 0.13)

0.018 ± 0.005

(0.46 ± 0.13)

0.012 ± 0.005

(0.30 ± 0.13)

0.015 ± 0.005

(0.38 ± 0.13)

RCWPM-0302 RM0302 13 0.034 ± 0.004

(0.86 ± 0.10)

0.021 ± 0.003

(0.53 ± 0.08)

0.013 ± 0.003

(0.33 ± 0.08)

0.007 ± 0.005

(0.18 ± 0.13)

0.008 ± 0.005

(0.20 ± 0.13)

RCWP-0201 0.024 ± 0.002

(0.61 ± 0.05)

0.012 ± 0.002

(0.30 ± 0.05)

0.009 ± 0.002

(0.23 ± 0.05)

0.006 ± 0.003

(0.15 ± 0.08)

0.006 + 0.002 - 0.004

(0.15 + 0.05 - 0.10)

RCWPM (Military M/D55342)

www.vishay.com Vishay Dale

Revision: 10-Mar-17 4Document Number: 31010

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DERATING CURVE

CAGE CODE: 91637 and 2799A (formerly SH903)

- 55 - 25 75 100 125 150 175

120

100

Ambient Temperature in °C

Rated Power in %

05025

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.