www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.026/02/13
Surface Mount Rectifier
Features:
• Low Cost
• Low Leakage
• Low Forward Voltage Drop
• High Current Capability
• Easily Cleaned With Alcohol,Isopropanol And Similar Solvents
Maximum Ratings and Electrical Characteristics:
Ratings at 25°C ambient temperature unless otherwise specied.
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load,derate by 20%.
Characteristics Symbol MURS160-13-F Units
Maximum recurrent peak reverse voltage VRRM 600 V
Maximum RMS voltage VRMS 420 V
Maximum DC blocking voltage VDC 600 V
Maximum average forward rectied current at TA=110°C IF(AV) 1 A
Peak forward surge current 8.3ms single half-sine-wave
superimposed on rated load at TJ=125°C IFSM 35 A
Typical reverse recovery time (Note 1) trr 50 ns
Maximum reverse current at TA=25°C
at rated DC blocking voltage at TA=125°C IR5
150 µA
Maximum instantaneous forward voltage at 1A VF1.25 V
Typical thermal resistance (Note 2) RθJA 13 °C/W
Operating / Storage junction temperature range TJ, TSTG -55 to +150 °C
Mechanical Data:
• Case : JEDEC DO-214AA, molded plastic
• Terminals : Solderable per MIL-STD-202, Method 208
• Polarity : Colour band denotes cathode
• Weight : 0.003oz, 0.093g
• Mounting position : Any
Note:
(1) Measured with IF=0.5A, IR=1A, Irr=0.25A.
(2) Junction to ambient.