SCHOTTKY DIODE MODULE DETECTORS High sensitivity and superior electrical and environmental reliability characterize these module detectors. They are hermetically sealed and contain internal RF matching, DC return, and RF bypass capacitor. In addition, the video port can be protected from static or transient voltages. This feature prevents damage due to handling (usually static) or system video transients. Models may be chosen for broadband RF performance or for optimized narrow bands. They may be used in microstrip or stripline applications for power monitoring, broadband ECM receivers, radar equipment, beacon or multi-channel receivers. Each detector model contains: * Input Impedance Matching * DC return * RF bypass capacitor * Detector diode * Video protection diode Features: * Static Protection * High Sensitivity * Small Size Applications: * Transmitter Monitoring * Radar Equipment * Missile Guidance Systems * Input to Low-Noise Amplifiers * Broadband Or Narrowband ECM Receivers * Power and Signal Monitors * Doppler Radar and Beacon Receivers * Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators Frequency Range (GHz) 0.1 - 1 0.5 - 2 1-2 0.5 - 4 1-4 2-4 1-8 2-8 4-8 2 - 12 8 - 12 1 - 18 2 - 18 8 - 18 12 - 18 Part (1) Number Minimum Sensitivity K (mV/mW) Flatness vs Frequency (+/-dB) Typical (2) TSS (dBm) Nominal (3) Video Capacitance (pF) Standard Case Styles Optional Case Styles ACSM2035N ACSM2001N ACSM2066N ACSM2108N ACSM2038N ACSM2002N ACSM2075N ACSM2014N ACSM2003N ACSM2007N ACSM2004N ACSM2047N ACSM2006N ACSM2015N ACSM2005N 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1800 1800 1800 2000 0.25 0.4 0.2 0.4 0.4 0.4 0.5 0.5 0.4 0.9 0.65 1.0 1.0 0.7 0.6 -52 -53 -53 -53 -53 -53 -53 -53 -53 -52 -52 -51 -51 -52 -52 270 75 20 20 20 20 20 20 20 20 12 20 12 12 12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M34, M35, M47 M34, M35, M47 M34,M35,M47,M50,M51 M43, M50, M51 M50, M51 M50, M51 -- -- M50, M51 -- -- -- -- -- -- NOTES: 1) Standard output polarity is negative. If negative output is required, substitute "P" for "N" in part number. 2) Tangential Signal Sensitivity (TSS) is a measure of low level sensitivity with respect to noise. It is measured using a video amplifier with a 2MHz bandwidth and a 3dB noise figure. 3) Video capacitance is used for RF bypass. This value can be changed if required for video response time or other considerations. Contact the factory if value other than those shown are needed. 4) Video protection is available on most models. This feature helps to prevent damage to the detector diode from incidents occurring at the video port. Transient electromagnetic spikes, static contact, or voltage surges can easily damage a detector diode. A video protection diode will clamp the voltage at a value less than the detector breakdown voltage. NOTE: Inclusion of this protection will cause the output voltage to compress and clamp. This occurs at about +10dBm input to the detector. If operation above +10dBm is required then the output protection should be modified or excluded. Adding a suffix "X" at the end of the model number will exclude the video protection feature. Contact the factory for assistance. 5) Zero bias schottky versions are available for most of listed biased schottky models with only minor differences in specifications. a. The zero bias schottky has an impedance of several thousand ohms. b. Zero bias schottky detectors exhibit less sensitive TSS due to the high diode impedance (typically a 3dB reduction). c. The temperature performance of the zero bias schottky is poor when operating at low input power levels. This difference becomes small at high levels (above 0dBm input power). The part number of zero bias versions includes a "Z" following the polarity indicator. 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Operating Temp: -65C to +125C Storage Temp: -65C to +150C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D Maximum Input Power: +20dBm 0.120 0.080 SCREENING : Standard Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF-38534): Internal Visual per MIL-STD-883, Method 2017 Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 0.250 0.120 0.330 CL O0.012 TYP. 0.246 .003 OUTPUT INPUT 0.129 0.058 TYP. CASE STYLE M12 0.280.005 0.079.002 0.411.002 0.252.003 0.400 MAX. 0.180 SQ. MAX. 0.050 (3) PLCS. 1 0.079.002 COLORED DOT INPUT 0.210 O0.058.003 THRU (2) PLCS. 0.015.003 TYP. 0.161.001 0.080.001 8 2 7 3 6 4 5 0.150 0.080 MAX. PIN FUNCTION 1 2 3 4 5 6 7 8 N/C RF INPUT N/C GROUND N/C OUTPUT N/C GROUND COLORED DOT INPUT 0.135.010 (2) PLCS. 0.012 MAX. (TO FLAT) O0.096.003 THRU 0.160 0.080 .001 0.135 .010 (2) PLCS. 0.020 MAX. (TO FLAT) 0.004 X 0.020 MIN. (2) PLCS. 0.004 X 0.020 MIN. (2) PLCS. 0.205.003 0.205.003 0.005.002 0.062.002 0.126 .004 0.126.004 0.062.002 CASE STYLE M47 CASE STYLE M50 CASE STYLE M51 O0.360.002 O0.300.002 O0.500.002 O0.450.002 0.160 0.200 0.120 0.080 0.430 0.250 0.120 0.185.015 0.0520.004 (2) PLCS. 0.185.015 O0.015 TYP. O0.187 .003 +.0015 0.1015 -.0000 0.018.002 (4) PLCS. 0.018.002 (4) PLCS. GND GND CL RF IN 0.094 RF IN 0.200.005 TYP. 0.034.005 VIDEO OUT 0.300.005 0.050 MAX. 0.031.003 N/C 0.031.003 VIDEO OUT 453 TYP. N/C 453 TYP. CASE STYLE M43 Part Number Ordering Information: CASE STYLE M34 CASE STYLE M35 Example: ACSM2015NZM51X20 ACSM2015: Schottky Module Detector, 8 - 18GHz N: Negative output polarity Z: Zero bias version (omit for biased version) M51: Package type X: No video protection (omit for inclusion of video protection) 20: 20pF custom output capacitance (omit for standard value) SM-0205 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com