RoHS Ready Products for Mobile Equipment T YCO E L E C T R O N I C S " T E C H N O LO GY P O R T F O L I O " Connector Systems / Electromechanical Components Antennas, GPS Antennas, Integrated Antenna Systems Battery Connectors & Assemblies Relays Circuit Protection Devices Heat Sinks & Thermal Solutions Wireless Products Tubing & Harnessing Products Switches and Knobs Sensors Touch Screen Displays Identification Labeling Products Fiber Optic Products Power Systems Racks & Panels Wire & Cable Electronic Modules Smart Cards / Leadframes Application Tooling Resistors & Inductors T YC O E L E C T R O N I C S "AT YO U R S E R V I C E " @ Tyco Electronics Online The Tyco Electronics website is an innovative and interactive source for application information, product updates and technical solutions. Our step-by-step software makes our website intuitive and user-friendly to better serve you ! Please contact us at : www.tycoelectronics.com Internet Homepage Product Information Center (PIC) www.tycoelectronics.com Electronic Internet Catalog www.catalog.tycoelectronics.com You can rely on Tyco Electronics PIC Team to provide you support for answers to your general information or technical questions in an efficient and effective manner. To reach our PIC staff, please contact your local Tyco Electronics organization. Product Literature For more information about Tyco Electronics and its wide range of products we offer you a variety of literature such as product catalogs and a lot of product specific brochures. For catalogs and product brochures please contact your local Tyco Electronics organization. All specifications subject to change. Consult Tyco Electronics for latest specifications. 1 2 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Introduction Tyco Electronics supplies a unique expertise for today's and tomorrow's mobile equipment applications, including cellular phones, mobile media players, digital camera's, GPS, payment terminals and other portable electronics. We also provide high-level analyses and simulation services to allow OEMs to predict system performance, resulting in faster design cycles and lower costs. In addition our early involvement programs allow us to design next-generation products to support equipment requiring more speed, higher density and lower costs. Our wide product portfolio for mobile equipment ranges from a variety of connectors (SIM, I/O, Battery, Camera, LCD, Board-to-Board, FPC etc.) to battery packs, antennas circuit protection, cable assemblies and others. In addition to that Tyco Electronics offers a set of technologies especially developed to offer low applied cost products to our customers in example MID technology (Molded Interconnection Device). We have several dedicated Mobile Equipment engineering teams to provide you with the best service from persons which understand the way you are doing business. The teams are dedicated to your success and are located in several regions of the world. These regions are fully equipped with all necessary services such as quick turn sample shop, simulation equipment, test laboratories and others. Our standard offering is broad and reflected in this catalog. Therefore we are pleased to introduce you to our portfolio for mobile equipment. 10 Reasons to Choose Tyco Electronics for Mobile Equipment Applications 1. Tyco Electronics is committed to customer success! 2. Wide range of products applicable for mobile equipment. 3. Global Sales, Logistics, Development and manufacturing teams in all regions of the world. 4. The most innovative connector company in the industry. 5. Low cost manufacturing locations around the globe. 6. Working with 8 of the top 10 OEM's. 7. Dedicated development teams for mobile equipment. 8. Wide range of (patented) technologies which enable reduction of applied cost. 9. Organization adopted to working with mobile equipment OEM's and ODM's. 10. Our commitment is your advantage. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Table of Contents 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Restriction on the Use of Hazardous Substances (RoHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors Generic SIM Connector, 6 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Generic SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-Directional SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Scaleable SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Super Low Profile SIM Connector with Full Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini UICC SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sliding SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector . . . . . . . . . . . . . . . . 0.3 mm FPC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Circular Audio Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Circular DC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini USB Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini USB Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Generic Snake and Pad Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multi Media Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MDIC and S-MDIC Connector System, 12 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI Connectors, Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Memory Card Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro SD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro SD/SIM Combi Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro SD Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring Probe Connector (SPC), 1 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring Fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD ITO Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD Connector 0.65 mm, 10 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Switching Coax Test Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Switching Coax Right-Angle Cable Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Switching Coax with ESD Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MID Micro Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MID Nano Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spring Probe Connector (SPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Generic Battery Connector, 2 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 mm Pitch Low Profile Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right-Angle Leaf Spring Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Onboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Super Low Profile (SLP) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Micro SLP Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STAXTM LD Elastomeric Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STAXTM Array Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ElastibootTM Connectors for Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STAXTM Elastomeric Connectors for COG LCDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SMT-ETI-1 STAXTM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STAXTM Coax Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vibration Motor Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 50 51 52 53 54 55 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Table of Contents (continued) Antenna Products Antenna Manufacturing Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RF Engineering Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 60 MID Technology MID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Cable Products USB Data Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Music Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charger Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mobile Phone Headset Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bluetooth Hands-Free Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High-Speed Micro-Coax Cable Assembly (MCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 66 67 68 69 70 Batteries Battery Systems ....................................................... 71 Mechatronic Center Niefern Technology Portfolio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LAMFRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini SIM Card Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 74 75 M/A-COM Antenna Products GaAs SP6T 2.5 V Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Raychem Circuit Protection Products Lithium Cells and Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable Battery Pack Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Portable Electronics Input Port Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - VLR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - VLP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - VTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - LTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - LR4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Strap Battery Devices - SRP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface-Mount Devices - nanoSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface-Mount Devices - microSMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface-Mount Devices - miniSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface-Mount Devices - miniSMDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast Acting Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slow Blow Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ESD Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 Switches FSM 6 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 FSMCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 FSM 3.4 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 FSM 0.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Turtle Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 CoinKeyTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Labels MP Metalized Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Kapton(R) Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 WP White Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Restriction on the Use of Hazardous Substances (RoHS) Restriction on the Use of Hazardous Substances (RoHS) At Tyco Electronics, we're ready to support your RoHS requirements. We've assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly "Out of Scope" of the RoHS Directive such as hand tools and other non-electrical accessories. Non-RoHS Compliant These part numbers are identified with a "" symbol. These products do not comply with the material restrictions of the European Union Directive 2002/95/EC. 5 of 6 Compliant A "" symbol identifies these part numbers. These products do not fully comply with the European Union Directive 2002/95/EC because they contain lead in solderable interfaces (they do not contain any of the other five restricted substances above allowable limits). However, these products may be suitable for use in RoHS applications where there is an application-based exception for lead in solders, such as the server, storage, or networking infrastructure exemption. Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced below. Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: Cross-Reference from Non-compliant to Compliant Products Ability to browse RoHS Compliant Products in our on-line catalog: http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do Downloadable Technical Data Customer Information Presentation More detailed information regarding the definitions used above So whatever your questions when it comes to RoHS, we've got the answers at www.tycoelectronics.com/leadfree 6 All specifications subject to change. Consult Tyco Electronics for latest specifications. RoHS Customer Support Center Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Generic SIM Connector, 6 Positions Generic SIM Connector, 6 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT SIM connectors with heights from 1.9 mm to 4.0 mm depending on your height requirements. Several variations have been tooled with and without ribs or positive stop (contact retention feature). This product works with SIM cards of Generation 1, 2 and 3. All variations are packaged in tape & reel for pick and place manufacturing. 2.54 7.5 Dim. B 8.5 2.54 2.54 1.5 Ribs Material and Finish Insulator: LCP, glass-filled, black color 1.0 11.7 2.54 1.7 Height Contact Pin: Phosphor bronze PCB Layout 7.0 Contact Plating: Selectively gold over nickel plated Part Numbers with Ribs without Ribs Package Quantity (Pieces per Reel) Drawing: C-338063 1.9 1-338063-9 1-1377227-9 1-1483288-9 1-1483437-9 1400 Product Specification: 108-19122 2.0 2-338063-0 2-1377227-0 2-1483288-0 2-1483437-0 1400 2.1 2-338063-1 2-1377227-1 2-1483288-1 2-1483437-1 1400 2.2 2-338063-2 2-1377227-2 2-1483288-2 2-1483437-2 1400 Documentation Test Report: 501-19011 Application Specification: 114-19054 Height (mm) without Contact Retention with Ribs without Ribs with Contact Retention 2.3 2-338063-3 2-1377227-3 2-1483288-3 2-1483437-3 1400 2.4 2-338063-4 2-1377227-4 2-1483288-4 2-1483437-4 1400 2.5 2-338063-5 2-1377227-5 2-1483288-5 2-1483437-5 1400 2.6 2-338063-6 2-1377227-6 2-1483288-6 2-1483437-6 1400 2.7 2-338063-7 2-1377227-7 2-1483288-7 2-1483437-7 1400 2.8 2-338063-8 2-1377227-8 2-1483288-8 2-1483437-8 1140 2.9 2-338063-9 2-1377227-9 2-1483288-9 2-1483437-9 1140 3.0 3-338063-0 3-1377227-0 3-1483288-0 3-1483437-0 1140 3.1 3-338063-1 3-1377227-1 3-1483288-1 3-1483437-1 1140 3.2 3-338063-2 3-1377227-2 3-1483288-2 3-1483437-2 1140 3.3 3-338063-3 3-1377227-3 3-1483288-3 3-1483437-3 1140 3.4 3-338063-4 3-1377227-4 3-1483288-4 3-1483437-4 1140 3.5 3-338063-5 3-1377227-5 3-1483288-5 3-1483437-5 1140 3.6 3-338063-6 3-1377227-6 3-1483288-6 3-1483437-6 1140 3.7 3-338063-7 3-1377227-7 3-1483288-7 3-1483437-7 1140 3.8 3-338063-8 3-1377227-8 3-1483288-8 3-1483437-8 1140 3.9 3-338063-9 3-1377227-9 3-1483288-9 3-1483437-9 1140 4.0 4-338063-0 4-1377227-0 4-1483288-0 4-1483437-0 1140 Bold Part Numbers are tooled All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Generic SIM Connector, 8 Positions Generic SIM Connector, 8 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT SIM connectors with heights from 1.9 mm to 4.0 mm depending on your height requirements. All variations are packaged in tape & reel for pick and place manufacturing. 2.54 Material and Finish Insulator: LCP, glass-filled, black color 10.1 max. 7.62 Contact Pin: Phosphor bronze Contact Plating: Selectively gold over nickel plated Documentation Drawing: C-338123 11.7 Dim. B 2.54 Product Specification: 108-19122 Test Report: 501-19011 1.9 Height 7.62 Application Specification: 114-19054 7.0 1.5 11.95 max. 1.7 PCB Layout Height (mm) Part Number Package Quantity (Pieces/Reel) Height (mm) Part Number Package Quantity (Pieces/Reel) 1.9 1-338123-9 1100 3.0 3-338123-0 890 2.0 2-338123-0 1100 3.1 3-338123-1 890 2.1 2-338123-1 1100 3.2 3-338123-2 890 2.2 2-338123-2 1100 3.3 3-338123-3 890 2.3 2-338123-3 1100 3.4 3-338123-4 890 2.4 2-338123-4 1100 3.5 3-338123-5 890 2.5 2-338123-5 1100 3.6 3-338123-6 890 2.6 2-338123-6 1100 3.7 3-338123-7 890 2.7 2-338123-7 1100 3.8 3-338123-8 890 2.8 2-338123-8 1100 3.9 3-338123-9 890 2.9 2-338123-9 890 4.0 4-338123-0 890 Bold Part Number is tooled 8 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 5-Directional SIM Connector 5-Directional SIM Connector Features Can be mated from 5 directions, left, right, front, back and top. The completely deep drawn contact nose provides smooth insertion and minimal card wear under any condition. Height range from 1.5 mm to 5.0 mm possible, while maintaining 0.5 mm contact deflection (GSM Specification). This product works with SIM cards of Generation 1, 2 and 3. 7.6 Material and Finish Insulator: GF liquid crystal polymer, black color 10.0 Dim. B Contact Pin: Copper alloy 2.54 Contact Plating: 1.2 m nickel underlayer, 1.25 m gold at card side, 0.1- 0.2 m gold at solder side 1.0 2.54 2.54 Documentation 2.54 0.1 PCB Layout 0.5 Product Specification: 108-19280 Test Report: 501-19095 Application Specification: 114-19092 2.0 Dim. A Drawing: C-1705300 Dimensions (mm) Part Number Package Quantity (Pieces/Reel) A B 1.5 7.7 1-1705300-5 1.6 7.7 1-1705300-6 1.7 7.7 1.8 Dimensions (mm) Part Number Package Quantity (Pieces/Reel) A B 1450 3.3 7.3 3-1705300-3 1450 1450 3.4 6.7 3-1705300-4 1450 1-1705300-7 1450 3.5 7.6 3-1705300-5 950 7.6 1-1705300-8 1450 3.6 7.1 3-1705300-6 950 1.9 7.6 1-1705300-9 1450 3.7 7.6 3-1705300-7 950 2.0 7.5 2-1705300-0 1450 3.8 7.1 3-1705300-8 950 2.1 7.3 2-1705300-1 1450 3.9 7.5 3-1705300-9 950 2.2 7.2 2-1705300-2 1450 4.0 6.8 4-1705300-0 950 2.3 7.0 2-1705300-3 1450 4.1 7.5 4-1705300-1 950 2.4 6.7 2-1705300-4 1450 4.2 6.8 4-1705300-2 950 2.5 7.7 2-1705300-5 1150 4.3 7.6 4-1705300-3 950 2.6 7.5 2-1705300-6 1150 4.4 6.8 4-1705300-4 950 2.7 7.2 2-1705300-7 1150 4.5 7.7 4-1705300-5 800 2.8 6.9 2-1705300-8 1150 4.6 6.9 4-1705300-6 800 2.9 7.7 2-1705300-9 1150 4.7 7.6 4-1705300-7 800 3.0 7.4 3-1705300-0 1150 4.8 6.6 4-1705300-8 800 3.1 7.0 3-1705300-1 1150 4.9 7.6 4-1705300-9 800 3.2 7.7 3-1705300-2 1150 5.0 6.6 5-1705300-0 800 Bold Part Numbers are tooled All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Scaleable SIM Connector Scaleable SIM Connector Features Scaleable SIM connector height from 0.7 mm to 2.0 mm (housing height), featuring two different kind of clips. 1 clip allover (1 piece clip design). The one piece clip design prevents for card bow. 2 piece clip design allows easy removal of the SIM card. Both versions have contact retention (anti lifting) features and smooth rounded contacts in order to decrease card wear to the minimum. Material and Finish Insulator: GF liquid crystal polymer, black color Contact Pin: Copper alloy Contact Plating: 1.2 m nickel underlayer, 1.25 m gold at card side, 0.1- 0.2 m gold at solder side Clip: Stainless steel/phosphor bronze Clip Plating: 3.0 m Sn allover, over 1.3 m nickel underlayer Part Numbers Total Height (mm) Housing Height (mm) 1.9 0.7 -1747314-1 - - 2.0 0.8 - - - 2.1 0.9 -1871406-1 - - 2.2 1.0 - - - 2.3 1.1 - - - 2.4 1.2 2-292292-4 - - 2.5 1.3 2-292292-5 - 1-1705615-3 1-1705615-4 SIM with Card Stop Clip Allover (1000 Pieces per Reel) SIM without Card Stop Clip Allover (750 Pieces per Reel) SIM without Card Stop 2-Piece Clip (1100 Pieces per Reel) 2.6 1.4 2-292292-6 2-292373-6 2.7 1.5 2-292292-7 2-292373-7 1-1705615-5 2.8 1.6 2-292292-8 2-292373-8 1-1705615-6 2.9 1.7 2-292292-9 2-292373-9 1-1705615-7 3.0 1.8 3-292292-0 3-292373-0 1-1705615-8 3.1 1.9 3-292292-1 3-292373-1 1-1705615-9 3.2 2.0 - 3-292373-2 2-1705615-0 Bold Part Numbers are tooled Documentation Part No. 1705615 Part No. 292292 Part No. 292373 Part No. 1747314 Customer Drawing C-1705615 C-292292 C-292373 C-1747314 Product Specification 108-19241 108-60031 108-60031 108-5998 Test Report 501-19069 501-60001 501-60001 501-5559 Application Specification 114-19075 not available not available not available 10 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Super Low Profile SIM Connector with Full Clip Super Low Profile SIM Connector with Full Clip Features * Connector Height = 1.55 mm max. * Size (H x W x L): 1.43 x 16.3 x 17.5 mm * Big clip totally encapsulates SIM contact area * Soldered clips provide additional mechanical stability * Datecode printed on the product Material and Finish Housing: LCP Contacts: Copper alloy 1.3 m nickel underlayer 0.4 m gold in the contact area and 0.05 m gold in the soldering area Clip: Stainless steel 1.3 m nickel underlayer, tin plated all over 16.3 Documentation Drawing: C-1981898 Product Specification: 108-78472 Test Report: See Product Specification Application Specification: 114-19075 17.5 17.0 0.5 typ. 2.54 1.43 Part No. 1981898-1 Package Quantity: 1000 pcs per reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 11 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Mini UICC SIM Connector Mini UICC SIM Connector Features This sliding SIM connector has been developed for usage with third generation SIM cards. The scaleable connector is available in heights from 1.2 mm to 1.9 mm (housing height). The forky contact provides a preload as well as anti lifting capabilities. The smooth and rounded contacts ensure minimal card wear, while the clip keeps the card in position during usage. Material and Finish Insulator: GF liquid crystal polymer, black color 8.1 3.9 Contact Pin: Copper alloy Contact Plating: 1.2 m nickel underlayer, 1.25 m gold at card side, 0.1- 0.2 m gold at solder side 13.4 12.9 Clip: Stainless steel 11.3 7.7 5.0 Clip Plating: 3.0 m Sn allover, over 1.3 m nickel underlayer 2.89 5.43 Documentation 7.97 2.54 Drawing: C-1705813 13.4 12.1 13.4 Product Specification: 108-19241 Test Report: 501-19069 1.0 0.9 2.7 2.77 1.6 2.2 Application Specification: 114-19075 PCB Layout Total Height (mm) Housing Height (mm) Part Number Package Quantity (Pieces/Reel) 1.9 0.7 1-1827465-1 1000 2.4 1.2 1-1705813-2 1000 2.5 1.3 1-1705813-3 1000 2.6 1.4 1-1705813-4 1000 2.7 1.5 1-1705813-5 1000 2.8 1.6 1-1705813-6 1000 2.9 1.7 1-1705813-7 1000 3.0 1.8 1-1705813-8 1000 3.1 1.9 1-1705813-9 1000 Bold Part Numbers are tooled 12 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Sliding SIM Connector, 8 Positions Sliding SIM Connector, 8 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT sliding SIM connectors. Material and Finish Insulator: Thermoplastic HT, UL 94 V-0 rated, black color 15.7 Contact Pin: Copper alloy Contact Plating: Selective gold over nickel plated 2.65 0.6 Clip: Brass, tin over nickel plated 11.8 1.0 5.9 0.6 2.5 3.7 Documentation Drawing: C-1857118 7.62 7.62 16.4 2.54 typ. 0.8 0.9 0.9 13.3 Part No. 1857118-1 8.0 0.78 5.3 Package Quantity: 800 Pieces per Reel 0.2 1.55 11.41 PCB Layout All specifications subject to change. Consult Tyco Electronics for latest specifications. 13 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector Features 1.0 mm or 1.5 mm mated height low profile stacking connector. Connector body width is only 2.7 mm and enables space saving. Formed contacts provide contact points on rolled surface enabling high reliability. Multiple point contact system is available (see note in table). For the latest information please contact your local sales engineer. 0.2n + 2.05 0.2n + 1.20 Material and Finish 0.2n - 0.40 Insulator: Thermoplastic, black color 0.4 Pitch Contact Pin: Copper alloy Contact Plating: Gold plating over nickel underplating 1.23 Documentation 2.2 2.66 0.2n + 2.1 Drawing: C-See table 0.2n + 1.2 0.2n - 0.4 Product Specification: 108-5901 0.4 Pitch Test Report: 501-5570 1.26 2.2 2.7 Instruction Sheet: 411-78159 Stacking Height 1.0 mm No. of Positions Plug 10 12 Stacking Height 1.5 mm Receptacle Prototype Tool Mass Production Tool Plug Receptacle Prototype Tool Mass Production Tool 1-1871566-0 1-1747769-0 X - 1-1871275-0 1-1871274-0 X - 1-1871566-2 1-1747769-2 X - 1-1871275-2 1-1871274-2 - - 16 1-1871566-6 1-1747769-6 X - 1-1871275-6 1-1871274-6 - - 20 2-1871566-0 2-1747769-0 - X 2-1871275-0 2-1871274-0 - - 22 2-1871566-2 2-1747769-2 X - 2-1871275-2 2-1871274-2 - - 24 2-1871566-4 2-1747769-4 - X 2-1871275-4 2-1871274-4 - X 28 2-1871566-8 2-1747769-8 X - 2-1871275-8 2-1871274-8 - - 30 3-1871566-0 3-1747769-0 X - 3-1871275-0 3-1871274-0 - - 40 4-1871566-0 4-1747769-0 X - 4-1871275-0 4-1871274-0 - - 46 4-1871566-6 4-1747769-6 - X 4-1871275-6 4-1871274-6 - - 50 5-1871566-0 5-1747769-0 - X 5-1871275-0 5-1871274-0 - - 54 5-1871566-4 5-1747769-4 - - 5-1871275-4 5-1871274-4 - X 56 5-1871566-6 5-1747769-6 - - 5-1871275-6 5-1871274-6 - X 60 6-1871566-0 6-1747769-0 - X 6-1871275-0 6-1871274-0 - - 70 7-1871566-0 7-1747769-0 - - 7-1871275-0 7-1871274-0 - - 80 8-1871566-0 8-1747769-0 X - 8-1871275-0 8-1871274-0 - - Stacking Height 1.0 mm: Plugs and Receptacles 4000 per Reel Stacking Height 1.5 mm: Plugs and Receptacles 3000 per Reel Please contact sales for other pin counts. 14 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 0.3 mm FPC Connector 0.3 mm FPC Connector Features 1.0 mm height low profile and 3.8 mm width narrow FPC connector for space saving. FCP is securely connected with easy one touch flip lever actuator. For the latest information please contact your local sales engineer. Material and Finish 0.3n + 1.3 Insulator: Thermoplastic 0.3n - 0.9 0.6 Pitch Ref. 0.12 typ. Color: Body: beige, Actuator: black 1.85 Contact Pin: Copper alloy 2.5 Contact Plating: Gold plating over nickel underplating 0.3 Pitch 0.3n - 0.3 Documentation 0.3n + 0.6 3.0 Drawing: C-1746237 0.2 Product Specification: 108-5944 0.9 Test Report: 501-5647 Part Numbers No. of Positions Narrow Type Standard Type Front Flip Lock Back Flip Lock Front Flip Lock 11 0-1827827-1 0-1827674-1 0-1746237-1 13 0-1827827-2 0-1827674-2 0-1746237-2 15 0-1827827-3 0-1827674-3 0-1746237-3 17 0-1827827-4 0-1827674-4 0-1746237-4 19 0-1827827-5 0-1827674-5 0-1746237-5 21 0-1827827-6 0-1827674-6 0-1746237-6 23 0-1827827-7 0-1827674-7 0-1746237-7 25 0-1827827-8 0-1827674-8 0-1746237-8 27 0-1827827-9 0-1827674-9 0-1746237-9 29 1-1827827-0 1-1827674-0 1-1746237-0 31 1-1827827-1 1-1827674-1 1-1746237-1 33 1-1827827-2 1-1827674-2 1-1746237-2 35 1-1827827-3 1-1827674-3 1-1746237-3 37 1-1827827-4 1-1827674-4 1-1746237-4 39 1-1827827-5 1-1827674-5 1-1746237-5 41 1-1827827-6 1-1827674-6 1-1746237-6 43 1-1827827-7 1-1827674-7 1-1746237-7 45 1-1827827-8 1-1827674-8 1-1746237-8 47 1-1827827-9 1-1827674-9 1-1746237-9 49 2-1827827-0 2-1827674-0 2-1746237-0 51 2-1827827-1 2-1827674-1 2-1746237-1 53 2-1827827-2 2-1827674-2 2-1746237-2 55 2-1827827-3 2-1827674-3 2-1746237-3 57 2-1827827-4 2-1827674-4 2-1746237-4 Package Quantity: 4000 Pieces per Reel Please contact sales for available pin counts. All specifications subject to change. Consult Tyco Electronics for latest specifications. 15 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Circular Audio Connectors Circular Audio Connectors Features Tyco Electronics offers several circular Audio Connectors for usage with 3.5 mm or 2.5 mm diameter plug. The mounting style, which can be either SMD or compressive, where the compressive style does not require a solder connection and is invulnerable for forces applied to the connection. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Test Report: See table Package Quantity (Pieces) Plug Diameter (mm) Connection Style 1705058-1 1) 4000 per Box 2.5 Compressive 13.5 07.2 1775250-1 1000 per Reel 2.5 SMD 11.6 07.7 Part Number 1) Length (mm) Width (mm) Height (mm) Switch Location Pins Product Specification Test Report 5.0 Y N/A 108-19TBA 501-19TBA 3.0 Y Y 108-57570 501-57660 1470964-1 1000 per Reel 2.5 SMD 06.8 11.6 3.0 Y Y 108-57466 501-57536 1) 1377032-3 2) 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056 1) 1377032-2 2) 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056 3.5 TH 14.2 09.2 4.5 Y Y 108-57185 501-57175 1470033-1 1470164-1 50 per Tube 3.5 TH 14.0 09.0 4.5 Y Y 108-57147 501-57130 1) 0440217-1 3) 310 per Tray 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121 1) 0440217-2 4) 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121 1470636-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326 1470636-2 200 per Tray 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326 1470778-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57399 0440343-1 250 per Tray 3.5 TH 15.0 10.8 7.3 Y Y 108-57462 501-57532 1) Not yet tooled Audio + DC, Application Specification 114-19046 3) Ring Color Silvery White 4) Ring Color Black 2) 16 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Circular DC Connectors Circular DC Connectors Features Tyco Electronics offers several Circular DC Connectors for usage with 3.5 mm or 2.5 mm diameter plug. The mounting style, which can be either SMD or compressive, where the compressive style does not require a solder connection and is invulnerable for forces applied to the connection. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Test Report: See table Part Number Package Quantity (Pieces) DC Plug Diameter (mm) Connection Style Length (mm) Width (mm) Height (mm) Switch Pin Diameter (mm) Location Pins Product Specification Test Report 1470177-1 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.00 Y 108-57176 501-57187 1470177-2 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.30 Y 108-57176 501-57187 1857353-1 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.00 Y - - 1857353-2 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.30 Y - - 1) 1377032-3 1) 3696 per Box 3.5 Compressive 12.70 13.00 5.0 Y 1.00 N/A 108-19190 501-19056. 1) 1377032-2 1) 3696 per Box 3.5 Compressive 12.70 13.00 5.0 Y 1.25 N/A 108-19190 501-19056. 1) 1483596-2 2) 308 per Tray 2.5 Compressive 10.30 6.2 4.5 N 0.65 N/A 108-19278 501-19TBA 1) 1483596-1 3) 308 per Tray 2.5 Compressive 10.30 6.2 4.5 N 0.65 N/A 108-19278 501-19TBA 1) Audio + DC, Application Specification 114-19046 Application Specification 114-19091 3) Color Yellow 2) All specifications subject to change. Consult Tyco Electronics for latest specifications. 17 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Mini USB Plug Mini USB Plug Features Tyco Electronics offers a complete range of (Mini) USB receptacles, cables and plugs. The system is fully compliant with the USB specification and supports data transmission speeds >USB 2.0 full speed. Material and Finish Insulator: LCP, glass-filled, black color Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel Documentation Drawing: C-1734205 Product Specification: 108-57062 Test Report: 501-57070 Mini B Plugs No. of Contacts Type Color Description Part Number Package Quantity (Pieces) 4 Mini B Black Mini B Plug with Contact Insert 4 Positions 0-1734205-1 1000 per Bag 5 Mini B Black Mini B Plug with Contact Insert 5 Positions 1-1734205-1 1000 per Bag Not applicable Mini B Not applicable Top and Front Shield 3-1734205-1 1000 per Bag Not applicable Mini B Not applicable Bottom Shield 4-1734205-1 1000 per Bag USB 2.0 Type A to Mini B Cable Assemblies No. of Conductors 4 18 Plug 1 USB Type A Plug 2 Mini B Color Black Description Length (mm) Part Number Package Quantity (Pieces) Standard USB-A to Mini-B Assembly, 1.0 M 1000 1496476-1 275 per Box Standard USB-A to Mini-B Assembly, 1.5 M 1500 1496476-2 220 per Box Standard USB-A to Mini-B Assembly, 2.0 M 2000 1496476-3 150 per Box Standard USB-A to Mini-B Assembly, 3.0 M 3000 1496476-4 110 per Box Standard USB-A to Mini-B Assembly, 5.0 M 5000 1496476-5 60 per Box Standard USB-A to Mini-B Assembly, 12 305 1496476-6 200 per Box Standard USB-A to Mini-B Assembly, 8 203 1496476-8 10 per Box C2113A USB Cable 800 1750516-1 200 per Box All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Mini USB Receptacle Mini USB Receptacle Features Tyco Electronics offers a complete range of (Mini) USB receptacles, cables and plugs. The system is fully compliant with the USB specification and supports data transmission speeds >USB 2.0 full speed. Material and Finish Housing: High temperature thermoplastic, UL 94 V-0, black color Contact: Phosphor bronze, selectively plated gold over nickel and tin-lead in solder area Shell: Phosphor bronze, half bright tin over copper underplating Documentation Drawing: C-See table Product Specification: 108-57062 Test Report: 501-57070 Mini USB Receptacles, Type B No. of Contacts Color Description 4 Black Mini USB, Receptacle 5 Black Mini USB, Right-Angle, SMT, pbFree Locating Post P&P Tape Part Number Package Quantity (Pieces) Y N 1-1775055-1 700 per Reel 1-1734035-1 150 per Tray Y N Y Y N N All specifications subject to change. Consult Tyco Electronics for latest specifications. 1-1734035-3 700 per Reel 1-1734035-4 700 per Reel 1-1734035-1 150 per Tray 1-1734035-3 700 per Reel 19 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Micro USB Connector Micro USB Connector Features and Advantages The brand new Micro USB connector further decreases the size needed for the popular USB connector system, while maintaining performance on the same level. It is specifically developped for mobile phone applications where size is a major issue. * Low profile connector system; Height = 2.7 mm (2.7 x 5.0 x 7.5 mm) * Robust design * 10,000 cxycles durability * Latching design provides strong mating Material and Finish Insulator: Thermoplastic resin Contact Pin: Copper alloy Contact Plating: Selectively gold plated over Ni-Pd over nickel Shell: Stainless steel, tin over nickel plated Documentation Drawing: C-See table Product Specification: 108-78434 Test Report: See Product Specification 20 No. of Conductors Type Receptacle 5 Plug Color Description Part Number Package Quantity (Pieces) Gray Receptacle AB 1981584-1 1000 Black Receptacle B 1981568-1 1000 White Plug A Type 1939053-1 1000 Black Plug B Type 1939054-1 1000 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Generic Snake and Pad Connector Generic Snake and Pad Connector Features The Snake and Pad contact system is a spring loaded approach to the I/O connector. Inherently the system is very forgiving of large mating tolerances and boasts a low total application cost. Using this proven contact system Tyco Electronics has 12 and 16 pos. standard connectors available. The connector system uses solderless compression in-phone "pad" and cradle cable plug "snake" contacts. The plug consists of full load cradle and cable connectors as well as charging plugs. The connector system can be keyed for individual customer applications. Tyco Electronics Snake and Pad connectors are highly reliable cellular interconnect solutions, used in millions of handsets. 29.9 25.7 3.7 2.75 8.75 8.4 6.0 Material and Finish Insulator: LCP, glass-filled, black color 35.4 0.7 typ. Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel at contact position, tin over nickel at solder area 2.4 5.0 1.1 typ. Locking Springs: POM, black color 26.8 Documentation Drawing: C-See table Product Specification: 108-19184 Test Report: 501-19044 Application Specification: 114-19060 5.3 4.35 3.3 1.65 max. 5.2 14.2 Mates with ) Part Number Package Quantity (Pieces) 5338980-1 5338979-1 PCB Thickness (mm) 5338980 5338979 5338982 338966 338967 2 Pos. 12 Pos. 16 Pos. 12 Pos. 16 Pos. No. of Pos. Type 2250 per Box 2 Plug Cable - - - - X X 2250 per Box 12 Plug Desktop Stand - - - - X - 5338979-2 2250 per Box 12 Plug Cable - - - - X - 5338982-1 1750 per Box 16 Plug Desktop Stand - - - - - X 5338982-2 1750 per Box 16 Plug Cable - - - - - X 338966-9 250 per Box 12 Receptacle N/A 0.9 X X - - - 1-338967-2- 250 per Box 16 Receptacle N/A 1.2 X - X - - Application Other PCB thickness can be made available upon request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Multi Media Interface Connector Multi Media Interface Connector Features This small versatile Multi Media Interface Connector supports various digital data/audio applications. Proprietary metal shell side lock provides superb EMI performance as well as mechanical robustness. Various cable assemblies are provided to support many mobile electronics applications. 5.3 2.0 1.5 0.18 Material and Finish 4.5 1.0 7.25 Insulator: Thermoplastic, UL 94 V-0, black color 7.5 Contact Pin: Copper alloy 4.0 6.7 0.5 typ. 6.2 9.0 0.3 7.5 Contact Plating: 1.0 m min. nickel underlayer, 0.1 m min. gold at mating side, 0.01-0.2 m gold at solder tin 8.5 3.0 Shell Plating: 0.5 m min. tin plating 3.95 3.0 2.5 1.4 0.95 Documentation 4.0 0.2 6.2 Drawing: See table 8.15 7.05 Product Specification: See table Test Report: See table 0.3 1.1 0.5 typ. 1.1 1.9 6.2 8.0 0.5 PCB Layout (for reference only) 1.3 MMI Connectors Pitch No. of Pos. 10 14 22 Package Quantity (Pieces) Height (mm) Style Plug N/A N/A Plug Assy for Ear Phone Connector 1612633-1 150 per Tray - 3.0 DIP Receptacle Assemby for Ear Phone 1612634-1 1500 per Reel - Receptacle 0.5 12 Part Number Type Description Comment 3.0 SMT Receptacle Assy for Ear Phone Jack Connector 1674432-1 1200 per Reel - 3.2 DIP Rec. Assy for Ear Phone Connector onboard reverse 1827349-1 1500 per Reel Reversed 1.4 DIP Receptacle Assy for Ear Phone Connector off 1674787-1 1500 per Reel Inboard 2.4 DIP Receptacle Assy for Ear Phone Connector off 1747124-1 1200 per Reel Inboard 2.4 DIP Receptacle Assy for Ear Phone Connector off 1746223-1 1500 per Reel Inboard, reversed Plug N/A N/A Plug Assy for MMIC 1746717-1 110 per Tray - Receptacle 3.0 SMT Receptacle Assy for MMIC 1746716-1 600 per Reel - Plug N/A N/A Plug Assy for DC Cable 1717169-1 110 per Tray - Receptacle 3.0 DIP Emboss Assy for MMIC Receptacle 1717312-1 600 per Reel - All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 MDIC and S-MDIC Connector System, 12 Positions MDIC and S-MDIC Connector System, 12 Positions Features The MDIC and S-MDIC I/O connector systems are further decreasing the size of common I/O interfaces. This 12 positions connector system is highly miniaturized and features a receptacle height as small as 2.0 mm. Small Size (L x W x H): 6.0 x 7.2 x 2.5 mm (S-MDIC) 7.15 x 8.7 x 2.0 mm (MDIC) Packaged in Tape and Reel Material and Finish Insulator: Thermoplastic acc. UL 94 V-0 Receptacle Plug 6.5 Contacts: Copper alloy 0.3 m gold over 1.3 m nickel in contact area. Gold-flash in other areas. 4.0 1.85 0.8 typ. 0.4 typ. Shell: SUS nickel plated 2.0 m min. 8.2 7.2 7.5 6.55 6.7 8.5 0.2 0.12 0.15 10.3 3.5 2.53 3.15 2.0 1.5 3.0 3.5 4.5 0.8 S-MDIC as shown Pitch (mm) Height (mm) Part Number Package Quantity S-MDIC Receptacle 0.4 2.5 368560-1 1000 per Reel S-MDIC Receptacle, Reversed 0.4 2.5 368565-1 1000 per Reel S-MDIC Plug 0.4 N/A 368555-1 1750 per Tray Description MDIC Receptacle 0.5 2.0 1827541-1 1000 per Reel MDIC Plug 0.5 N/A 1827546-1 1110 per Tray All specifications subject to change. Consult Tyco Electronics for latest specifications. 23 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 HDMI Connectors, Type C HDMI Connectors, Type C Features New reduced form factor connector for small portable devices such as camcorders, still cameras and mobile phones. Compliant with HDMI version 1.3 specification. These HDMI connectors are on the approved connector list. Material and Finish Insulator: Thermoplastic acc. UL 94 V-0, color black Contact: Copper alloy 11.2 7.4 8.5 Shell: Copper alloy 0.35 Pick and Place Feature: Polyamide tape 3.45 2.1 1.0 10.85 2.3 30.0 14.0 6.5 2.42 9.0 8.4 10.4 10.85 0.375 typ. 1.0 typ. 0.8 typ. 4.7 1.1 typ. 0.2 typ. 0.4 typ. PCB Layout 24 7.2 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Memory Card Connectors Memory Card Connectors Features Tyco Electronics offers a wide range of memory card connectors in several variations. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Type SD SD Reverse Memory Stick Part Number Package Quantity (Pieces) Ejection Type Card Detection Switch Write Protect Switch Standoff Height Location Pin (mm) Packaging Product Specification 0-1470139-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 0-1470139-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 0-1470139-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127 0-1734234-1 45 per Tray P-PI Y Y 0 0.85 Tray 108-57127 0-1734234-2 500 per Reel P-PI Y Y 0 0.85 T&R 108-57127 0-1734234-3 45 per Tray P-PI Y Y 0 0.40 Tray 108-57127 0-1734234-4 500 per Reel P-PI Y Y 0 0.40 T&R 108-57127 0-1734472-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 0-1734472-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 0-1734472-3 108-57127 300 per Reel P-P Y Y 0 0.70 T&R 1-1734472-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 1-1734472-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 1-1734472-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127 0-1871250-3 220 per Reel P-P Y Y 0 0.55 T&R 108-78220 0-1871250-4 220 per Reel P-P Y Y 0 0 T&R 108-78220 0-1871583-1 280 per Reel P-P Y Y 0 0.55 T&R 108-78220 0-1871583-2 281 per Reel P-P Y Y 0 0 T&R 108-78220 0-1871583-3 282 per Reel P-P Y Y 0 0.55 T&R 108-78220 0-1871583-4 283 per Reel P-P Y Y 0 0 T&R 108-78220 0-0440297-1 48 per Tray P-P Y Y 0 0.85 Tray 108-57127 0-0440297-2 500 per Reel P-P Y Y 0 0.85 T&R 108-57127 0-0440297-3 48 per Tray P-P Y Y 0 0.45 Tray 108-57127 0-0440297-4 500 per Reel P-P Y Y 0 0.45 T&R 108-57127 108-57504 0-1775059-1 250 per Reel P-P Y Y 0 0.50 T&R 0-1775012-1 250 per Reel P-P Y Y 1.2 0.50 T&R 108-57504 0-1775067-1 250 per Reel P-P Y Y 0 0.50 T&R 108-57504 0-1871916-1 200 per Reel P-P Y Y 0 0.45 T&R - 0-1903302-1 180 per Reel P-P Y Y 0 0.45 T&R - 0-1674162-1 45 per Tray P-P Y N 0 0.80 Tray 108-57340 0-1674319-1 54 per Tray P-P N N 0 0 Tray 108-57340 0-1470332-1 72 per Tray P-PI N N 0 0.60 Tray 108-57238 0-1717431-1 54 per Tray P-P N N 0 0 Tray 108-57340 XD 0-1470864-1 50 per Tray P-PI N N 0 0.45 Tray 108-57432 T-Flash 0-1827034-1 1100 per Reel P-P N N/A 0 0 T&R 108-78224 Mini SD 0-1775204-1 750 per Reel P-P Y N/A 0 0.5 T&R 108-57589 Micro SD 0-1871602-1 1000 per Reel P-P Y N/A 0 0 T&R 108-78337 0-1871602-2 1000 per Reel P-P Y N/A 0 0.45 T&R 108-78337 0-0338610-1 1350 per Reel P-PI N N/A 0 0 T&R 108-19173 MMC ) Full cover ) Reversed reflow possible All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Micro SD Connector Micro SD Connector Features The Micro SD socket has an easyto-use push-push connection. It is equipped with a mechanism we created in-house that maintains sufficient card ejection stroke while preventing the card from popping out. Also, it provides high reliability in a compact low profile shape with a durable card detection switch built-in and it holds contact securely. The Micro SD/SD adapter achieves longlasting high operability by using an internal construction that prevents flexing and other stresses on the case from being conveyed to contacts. Micro SD Socket * Excellent insertion click * Rugged connectivity maintains connections * Supports embossed packaging Micro SD/SD Adapter * Hook spring mechanism makes clear click connection * Comes with socket * Any label design modification is possible * Equipped with write protect key 14.6 1.73 14.3 15.3 Material and Finish 16.0 Insulator: Thermoplastic, black color Contact: Copper alloy, gold over nickel plated Shell: Copper alloy, gold over nickel plated Coil: SWP Cam Rod: SUS 1.7 2.5 Hook Spring: SUS Documentation Part No. 1871602-1 without Locating Pin Part No. 1871602-2 with Locating Pin Drawing: C-1871602 Product Specification: 108-78337 Test Report: 501-5756 26 All specifications subject to change. Consult Tyco Electronics for latest specifications. 1.35 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Micro SD/SIM Combi Connector Micro SD/SIM Combi Connector Features This connector combines a Micro SD memory slot with a SIM card connector on top of it. Besides of the enormous space savings this brings, the connector also includes features like shielding test points and of course push-push ejection system and a card detection switch. Material and Finish SIM Contact: Copper alloy, plated gold over nickel Insulator: Thermoplastic, black color Micro SD Contact: Copper alloy, plated gold over nickel Switch Contacts: Copper alloy plated gold over nickel Cam Slider: Thermoplastic, black color 17.3 Cam Hook Spring: Stainless steel 8.0 3.0 Camrod: Stainless steel Coil Spring: Piano wire nickel plated 1.1 typ. Bottom Shell: Copper alloy, nickel plated 17.6 Top Shell: Copper alloy, gold over nickel plated 14.28 19.7 11.0 Documentation 0.4 Drawing: C-368637 3.4 Product Specification: 108-61079 Test Report: 501-61050 1.45 1.8 18.85 1.3 0.6 0.65 1.5 1.1 0.95 16.3 2.8 1.9 1.27 PCB Layout Part No. 368637-3 Package Quantity: 600 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 27 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Micro SD Adapter Micro SD Adapter Features This adapter allows the Micro SD card to be read in a normal SD card slot. The adapter is equipped with a spring which provides required retention force for the Micro SD card. Custom labeling can be provided on demand. Material and Finish Insulators: Thermoplastic Contacts: Copper alloy selective gold plated Spring: Stainless steel Label: PET Documentation Drawing: C-1903290 Product Specification: 108-78355 28 Description Micro SD Adapter with Soft Case Part Number Package Quantity 1903290-1 60 Tray All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Spring Probe Connector (SPC), 1 Position Spring Probe Connector (SPC), 1 Position Features Spring Probe Connectors require very small space on printed circuit board. Spring Probe Connectors can be used for battery connections as well as antenna, shielding and many other applications. A wide variety of pin count, size, and soldering interfaces are available. Please contact your sales for more details. Material and Finish Plunger: Brass Body: Brass Spring: Piano wire Contact Plating: Nickel underlayer, 0.1 m min. gold plating Height / Length (mm) Force (N) Body Height Max. Compression Height Working Height Min. Compression Height Uncompressed Height Min. Force 6.26 6.26 6.76 7.26 7.76 3.10 3.20 3.60 4.00 4.20 6.10 6.20 6.60 7.10 5.13 5.68 6.08 5.00 5.10 5.45 7.60 7.75 7.30 7.40 4.90 7.35 Force (N) Nominal Force Max. Force 0.3 0.8 +/- 0.2 2 1.5 1.9 0.3 0.8 +.6 -0.2 - 1.5 1.9 7.60 0.5 0.9 +/-0.3 - 1.5 1.8 6.70 6.88 0.3 N/A 1.3 1.5 2.3 6.00 6.50 0.3 0.9 +/- 0.3 - 1.5 1.8 8.15 8.65 9.15 0.3 0.9 +/- 0.3 - 1.5 1.8 7.80 8.30 8.80 0.3 0.9 +/- 0.4 - 1.5 1.8 - 5.47 - 6.10 N/A 1 - 001.175 001.175 7.90 8.40 8.90 9.40 0.6 N/A 1.8 1.5 02.65 All specifications subject to change. Consult Tyco Electronics for latest specifications. Min. Diameter Max. Diameter 29 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Spring Fingers Spring Fingers Features Spring Fingers provides highly reliable connection in many applications such as shielding, cconnection to vibration motors, antennas, speakers and microphones. Our large portfolio contains products with several mating heights and plating variants. Material and Finish Contact Pin: Copper alloy Contact Plating: See table Documentation: Drawing: See table Product Specification: See table Test Report: See table Description Part Number Package Quantity (Pieces) Width (mm) Uncompressed Height (mm) Effective Height (mm) Base Material Plating Solder Area Plating Contact Area Product Specification Test Report 501-78113 820 0-1447009-5 5000 per Reel 2.0 0.8 0.3-0.5 Cu Alloy Au Au 108-78123 915 0-1483748-1 5000 per Reel 1.5 0.8 0.6-0.3 Cu Alloy Au Au - - 1312 0-1447009-6 5000 per Reel 1.2 1.3 0.7-1.0 Cu Alloy Au Au 108-78135 501-78123 1410 1-1447360-1 5000 per Reel 1.0 1.4 1.05-1.30 Cu Alloy Au Au 108-78174 501-78159 1511 0-1565158-1 5000 per Reel 1.1 1.5 0.95-1.30 Cu Alloy Au Au 108-57850 - 1520 0-1746136-1 5000 per Reel 2.0 1.5 0.6-1.0 BeCu Au Au - - 1608 0-1565322-1 5000 per Reel 0.8 1.6 1.1-1.4 Cu Alloy Au Au 108-57860 - 1715 0-1447360-9 5000 per Reel 1.5 1.7 0.9-1.3 Cu Alloy Au Au 108-78143 - 1895 0-1857724-4 5000 per Reel 0.95 1.8 1.5-1.0 Stainless Steel Au Au - - 3025 Z1-T 0- 440432-1 2500 per Reel 2.5 3.0 1.0-2.5 Cu Alloy Sn Au 108-57169 501-57159 3025-Z1T2 0-1734300-1 2500 per Reel 2.5 3.0 0.8-3.0 Cu Alloy Sn Au 108-57507 501-57581 3525A 0-1447009-8 2000 per Reel 2.5 3.5 2.0-3.0 Cu Alloy Au Au 108-78162 501-78162 4025 0-1437259-6 2000 per Reel 2.5 4.0 2.0-3.5 Cu Alloy Ni Ni 108-78156 501-78141 404025C-T 0-1720028-2 2000 per Reel 2.5 4.0 0.8-3.2 Cu Alloy Sn Sn 108-57507 501-57581 5025T 0- 440423-1 1500 per Reel 2.5 5.0 2.0-4.0 Cu Alloy Au Au - - 6525 0- 440430-1 1200 per Reel 2.5 6.5 4.0-6.5 Cu Alloy Sn Au 108-57130 501-57110 30 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 LCD ITO Connector, 8 Positions LCD ITO Connector, 8 Positions Features 8 positions ITO connector for chip on glass technology. The connector is being glued to the LCD, using an anisotropic conductive film. The compressive part of the connector is used for contacting the PCB. Material and Finish Insulator: Thermoplastic resin, black color Contact Pin: Copper alloy Contact Plating: 0.25 m gold min. over 1.3 m nickel in contact zones. Documentation Drawing: C-338970 Product Specification: 108-19189 8.05 0.4 1.15 typ. Test Report: 501-19047 Application Specification: 114-19061 3.2 1.8 3.5 0.6 16.0 4.5 Part No. 338970-1 Package Quantity: 1300 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 31 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 LCD Connector 0.65 mm, 10 Positions LCD Connector 0.65 mm, 10 Positions Features The connector is SMD soldered to the main board and provides a stable and reliable connection by compressive contacts with the LCD module. Material and Finish Insulator: Glass-reinforced LCP, black color Contact Pin: BeCu Copper alloy Bracket: BeCu Copper alloy Contact Plating: 0.5 m gold min. over 1.3 m nickel in contact zone. Other area's flash gold over 1.3 m nickel. 17.15 2.1 Documentation Drawing: C-1705536 5.35 6.8 Product Specification: 108-19269 1.5 typ. 13.5 5.18 Part No. 1705536-2 0.62 2.15 Package Quantity: 1900 Pieces per Reel 1.1 17.4 9 x 1.5 = 13.5 1.5 1.2 0.8 4.85 7.17 1.4 1.64 0.78 PCB Layout 32 0.9 16.7 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Standard Switching Coax Standard Switching Coax Features These switching coax connectors are used for testing and setting the power of the phone on the production lines but also to make external switched connection in a car kit application to use an external antenna. The deep drawn outer shell allows a misalignment tolerance capture up to 1.0 mm in all direction. This system allows up to 20.000 mating/switching cycles. 3 different height available: 6.0 mm, 4.5 mm and 3.5 mm (only 0.5 mm tolerance capture). Coplanarity: 0.1 mm 2.7 Material and Finish Dielectric: PEEK, natural color Outer Shell: Steel gold plated 3.1 0.8 2.4 3.1 2.7 Switch Contacts: Stainless steel, selective plated Center Pin: Brass, gold plated 3.8 3.2 0.9 3.7 4.3 8.0 2.4 5.4 Documentation 3.4 Drawing: C-619061, C-61062 and 619072 0.6 Product Specification: 108-71000 3.7 Test Report: 501-19028 Dim. A 4.6 3.0 4.0 2.5 1.7 Recommended PCB Layout 0.1 Dimension A (mm) Part Number Package Quantity (Pieces) 6.0 619061-1 1200 per Reel 4.5 619062-1 1600 per Reel 3.5 619072-1 1600 per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 33 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Standard Switching Coax Test Adapters Standard Switching Coax Test Adapters Features Test adapters are used in Test Jigs on mobile phone production lines to connect smoothly to the PCB Jack switch. This system allows a minimum of 100,000 cycles mating cycles. Applicable up to 3 GHz. Material and Finish Dielectric: PTFE Outer Shell: CuBe or similar, gold plated Center Contact: CuBe or similar, gold plated 35.0 22.0 Documentation 13.0 2.5 7.0 Drawing: C-619052, C-619068 6.62 Product Specification: 108-71000 Test Report: 501-19028 3.4 6.5 10.0 5.47 1/4-36 UNS-2A Part No. 619052-1 35.0 22.0 13.0 2.5 7.0 6.62 1/4-36 UNS-2A Part No. 619052-1 34 3.4 6.5 10.0 All specifications subject to change. Consult Tyco Electronics for latest specifications. 8.18 5.47 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Standard Switching Coax Right-Angle Cable Plug Standard Switching Coax Right-Angle Cable Plug Features Right-Angle cable plugs are used mainly for car kit application but can also be used in test jigs instead of test adapters. The integrated floating system allows smooth connection, able to capture tolerances up to 1.0 mm misalignment between phone and car kit with any risk of damaging the mobile phone. A minimum of 20,000 mating cycles can be done with this system. Various form and length can be offered. Cable to be used: RG 174, RG 316. 20.3 14.9 3.4 Material and Finish 11.0 Dielectric: PEEK Outer Shell: CuBe or similar, gold plated 3.3 3.4 Center Contact: CuBe or similar, gold plated 3.1 Documentation Drawing: C-619078, C-619028 Part No. 5-619078-2 Package Quantity: 500 Pieces Product Specification: 108-71000 Test Report: 501-19028 15.6 12.1 10.92 6.62 1.65 9.6 3.4 3.9 3.7 5.47 Part No. 5-619028-2 Package Quantity: 500 Pieces For further models, please contact Tyco Electronics All specifications subject to change. Consult Tyco Electronics for latest specifications. 35 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Standard Switching Coax with ESD Proctection Standard Switching Coax with ESD Proctection Features These switching coax connectors are used for testing and setting the power of the phone on the production lines but also to make external switched connection in a car kit application to use an external antenna. This 3 connector types offer in addition an ESD protection which means that as long as the PCB connector is not connected to a test connector or a cable connector, the center contact actuating the switch is grounded. The outer shell allows also a misalignment tolerance capture up to 1.0 mm in all direction. This system allows up to 20.000 mating/switching cycles. Two version available: Height of 6.3 mm and 4.1 mm Recommended PCB Layout 1.75 0.8 1 (4 .0 x) Coplanarity: 0.1 mm 8 5. 1.75 Material and Finish 0.8 Outer Shell: Steel gold plated 5. 8 4. 4 Dielectric: PEEK, natural color 0.65 1.35 0 1. x) (4 Switch Contacts: Stainless steel, selective plated Center Pin: Brass, gold plated 3.4 5.0 0.56 0.97 Documentation Drawing: C-619201 and 619231 4.0 3.8 Product Specification: 108-71053 and 108-71063 1.8 Height (mm) Diameter (mm) 4.1 5.0 Part Number Package Quantity (Pieces) Comment 619201-1 1600 per Reel - 619231-1 1600 per Reel In/Out 180 rotated Test Adapters and Cable Plugs to be used for all Standard switching Coax with ESD protection: Same as for Standard Switching Coax. 36 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 MID Micro Switching Coax MID Micro Switching Coax Features This very small switching coax connector is used for testing and setting the power of the phone on the Mobile Phone production lines. Applicable up to 6 GHz. This connector using MID technology has only two components and allows a coplanarity value of max 0.08 mm. PCB surf. need: 3.0 x 3.0 mm Height: 2.5 mm Two types of mating connector offered: * Press-on for test jigs * Snap-on for hand testing 1.3 3.0 3.0 Material and Finish 3.2 Dielectric / Outer Shell / Second Signal Contact: Two shot molded LCP selectively gold plated Documentation 1.12 0.46 Switch Contacts: Stainless steel, gold plated 1.54 0.46 0.92 0.66 0.66 1.7 3.4 2.5 Drawing: C-619196, C-619210, C-619211 0.8 (4x) Product Specification: 108-71062 Recommended PCB Layout 3.0 SMD Switch: Part No. 619196-1 Package Quantity: 1,000 Pieces per Reel Right-Angle Cable Plug with Snap Fingers: Part No. 5-619211-1 Test Adapter: Part No. 619210-1 Package Quantity: 50 Pieces per Box All specifications subject to change. Consult Tyco Electronics for latest specifications. 37 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 MID Nano Switching Coax MID Nano Switching Coax Features This very small switching coax connector is used for testing and setting the power of the phone on the Mobile Phone production lines. Applicable up to 6 GHz. This connector using MID tech nology has only two components. By having the switch contact mounted inside the connector, only the MID outer shell is touching the PCB. This allows remarkable coplanarity value of max. 0.06 mm. PCB surf. need: 2.7 x 2.7 mm Height: 1.7 mm Two types of mating connector offered: * Press-on for test jigs * Snap-on for hand testing Material and Finish Dielectric / Outer Shell / Second Signal Contact: Two shot molded LCP selectively gold plated 2.7 Switch Contact: Stainless steel, gold plated Recommended PCB Layout 0.55 2.7 2.9 Documentation 0.4 Drawing: C-619213, C-619214, C-619217 Product Specification: 108-71065 1.55 1.0 1.9 0.93 2.0 2.95 1.15 0.65 1.7 0.4 SMD Switch: Part No. 619213-1 Package Quantity: 8,000 Pieces per Reel Snap-On Test Adapter: Part No. 619217-1 * Spring loaded center contact Test Adapter: Part No. 619214-1 * Spring loaded outer conductor * Spring loaded center contact 38 All specifications subject to change. Consult Tyco Electronics for latest specifications. 0.55 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Spring Probe Connector (SPC) Spring Probe Connector (SPC) Features Spring Probe Connectors are widely used in the electronics industry. In mobile equipment they can be used in several applications such as antenna, charging/power, shielding and many other applications. Their proven design provides several advantages: * Relatively large stroke * Small Printed Circuit Board usage * Spring action in only one direction (direction of movement) The Tyco Electronics spring probe connector portfolio contains a vast variety of products with several heights, strokes, building styles (verticall or right-angle), pin counts and pitches. Part Number Package Quantity (Pieces) Pitch Contact Height (Free) Stroke Mating Type Battery Mating 1746730-1 1000 per Reel 3.00 3.30 0.90 Vertical (180) Rotating (hinged) 1746750-1 1500 per Reel 3.00 3.70 0.90 Vertical (180) Rotating (hinged) 1279154-1 1000 per Reel 3.60 4.45 1.20 Vertical (180) Rotating (hinged) 0900971-1 1000 per Reel 4.00 5.00 1.40 Vertical (180) Rotating (hinged) 1612681-1 1000 per Reel 3.60 5.00 1.40 Vertical (180) Rotating (hinged) 0900905-1 1000 per Reel 3.60 5.00 1.40 Vertical (180) Rotating (hinged) 1746931-1 1000 per Reel 3.00 5.10 0.90 Vertical (180) Rotating (hinged) 0900795-1 1000 per Reel 4.00 5.70 1.50 Vertical (180) Rotating (hinged) 0900965-1 1000 per Reel 3.60 6.40 1.40 Vertical (180) Rotating (hinged) Body: Brass 0900712-1 1000 per Reel 3.00 6.90 1.50 Vertical (180) Rotating (hinged) 1705254-1 2060 per Reel 3.10 2.80 2.30 Right-Angle (90) Sliding & hinged Contact Plating: Nickel underlayer, 0.1 m min. gold plating 1612493-1 1000 per Reel 3.00 3.95 1.40 Vertical (180) Rotating (hinged) 1746751-1 1500 per Reel 3.00 5.50 1.50 Vertical (180) Rotating (hinged) 1717400-1 1000 per Reel 4.00 6.30 1.40 Vertical (180) Rotating (hinged) 1746116-1 1000 per Reel 4.60 6.35 1.25 Vertical (180) Rotating (hinged) 1747103-1 1000 per Reel 3.45 4.15 1.70 Right-Angle (90) Sliding & hinged 1717017-1 1000 per Reel 3.85 4.60 1.65 Right-Angle (90) Sliding & hinged 1717257-1 1000 per Reel 3.50 3.95 1.40 Right-Angle (90) Sliding & hinged Drawing: See table 1717029-1 1000 per Reel 3.50 4.43 1.70 Right-Angle (90) Sliding & hinged 1717294-1 1000 per Reel 2.60 4.75 1.60 Right-Angle (90) Sliding & hinged Product Specification: See drawing 1705130-1 1500 per Reel 2.50 5.00 1.50 Vertical (180) Rotating (hinged) 1705030-1 1500 per Reel 2.54 3.60 1.00 Vertical (180) Rotating (hinged) 1705795-1 1250 per Reel 2.54 5.60 1.50 Vertical (180) Rotating (hinged) 0900688-1 1000 per Reel 4.00 5.50 1.40 Vertical (180) Rotating (hinged) 0900988-1 1000 per Reel 4.00 5.50 1.50 Vertical (180) Rotating (hinged) 1674783-1 1000 per Reel 4.00 5.70 1.50 Vertical (180) Rotating (hinged) 1483960-1 1500 per Reel 2.54 4.10 1.00 Vertical (180) Rotating (hinged) 1377269-2 1500 per Reel 2.54 5.00 1.50 Vertical (180) Rotating (hinged) 1674977-2 1500 per Reel 2.90 5.15 1.25 Vertical (180) Rotating (hinged) 1483940-1 1500 per Reel 2.54 5.20 1.40 Vertical (180) Rotating (hinged) 1674977-1 1400 per Reel 2.90 6.65 1.25 Vertical (180) Rotating (hinged) 1717989-1 1000 per Reel 3.70 2.90 1.65 Right-Angle (90) Sliding & hinged 1746773-1 1000 per Reel 3.50 3.65 1.70 Right-Angle (90) Sliding & hinged No. of Positions Material and Finish Insulator: Thermoplastic, black color 2 Probe Pin: Brass 3 Documentation 4 5 All specifications subject to change. Consult Tyco Electronics for latest specifications. 39 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Generic Battery Connector, 2 Positions Generic Battery Connector, 2 Positions Features Our Generic 2 positions SMT Battery Connector has an industry proven contact design that can be used in a wide variety of applications. Two contacts can be used for one pad for redundancy reasons. Its small size and low cost make this connector ideal for low to medium volume requirements. This connector is also "in-line" stackable for multi position requirements. 6.2 1.0 Material and Finish Insulator: LCP, glass-filled, black color 7.0 1.85 4.25 Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel and tin on solder beam 0.7 4.1 2.0 Documentation Drawing: C-6337194 Part No. 6337194-1 Package Quantity: 550 Pieces per Reel 4.8 Product Specification: 108-3419 1.5 Test Report: GB 39-99 0.4 0.85 Application Specification: 114-3211 7.0 4.25 1.0 Recommended PCB Layout 1.8 3.4 6.8 1.05 2.05 0.6 2.8 2.2 7.05 40 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 1.6 mm Pitch Low Profile Battery Connector 1.6 mm Pitch Low Profile Battery Connector Features Because of their low cost, reliability and high current capacity, Leafspring connectors are ultimately suitable for battery connections. This connector series features a low housing height of 2.1 mm min. The product can be used with hinged or slided batteries and can carry up to 2 A at 250 V AC. Material and Finish Insulator: Thermoplastic, black color, LCP or equivalent UL 94 V-0 1.6 typ. 4.8 Contact Pin: Copper alloy Contact Plating: 0.38 m gold plating on contact area, gold-flash on solder area over 1.27 m nickel 0.6 1.25 2.5 0.15 Documentation 1.0 0.1 Drawing: C-See table 7.0 Product Specification: 108-60035 Test Report: 501-5629 1.2 1.2 4.33 0.8 1.0 Recommended PCB Layout 1.25 1.6 No. of Positions Pitch (mm) Housing Height (mm) Total Height Uncompressed (mm) Part Number Package Quantity (Pieces) 4 1.6 2.5 3.75 292331-1 1500 per Reel 2 1.6 2.5 3.75 292331-2 1500 per Reel 3 1.6 2.5 3.75 292331-3 1500 per Reel 5 1.6 2.5 3.75 292331-5 1500 per Reel 3 3.0 2.1 3.65 292448-1 1500 per Reel Bold Part Numbers have been tooled. All specifications subject to change. Consult Tyco Electronics for latest specifications. 41 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Right-Angle Leaf Spring Battery Connector Right-Angle Leaf Spring Battery Connector Features Right-Angle Leaf Spring Battery Connector provides reliable battery interconnection for mobile handset application. Typical part numbers are shown below. For the custom sizes, please contact Tyco Electronics sales. Material and Finish Insulator: 6T PA, UL 94 V-0, black color 12.0 Contact Pin and Solder Pegs: Copper alloy 10.9 0.7 Contact Plating: 1.27 m min. nickel underlayer, 1.0 m min. gold at contact side 0.05-0.13 m gold at solder side Solder Peg Plating: 1.0 m min. nickel underlayer, 1.0 m min. tin plating 1.2 11.0 2.2 9.6 Ref. 7.4 1.2 2.0 7.5 Documentation 2.2 1.0 3.0 3.2 10.5 Drawing: See table 7.9 5.0 Product Specification: See drawing 1.72 1.5 2.4 1.8 3.0 6.3 6.9 Recommended PCB Layout 3.9 1.9 No. of Positions 3 42 1.8 Part Number Package Quantity (Pieces) Pitch Contact Height (mm) Total Height (mm) Mount Size Width x Depth (mm) Finish 1717273-1 500 per Reel 3.0 3.9 6.3 10.5 x 8.6 Ni + Au 1717406-1 500 per Reel 3.0 5.0 7.7 10.5 x 7.4 Ni + Au 1717413-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au 1717562-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au 1717838-1 40 per Tray 6.5 6.6 11.50 20.0 x 5.0 Ni + Au 1746142-1 500 per Reel 3.2 3.5 6.5 12.4 x 3.7 Ni + Au 1747129-1 500 per Reel 3.0 4.4 6.7 10.3 x 4.9 Ni + NiPd + Au 1827000-1 40 per Tray 6.5 10.40 17.10 19.9 x 2.6 Ni + Au 1827928-1 400 per Reel 3.0 05.75 7.6 11.2 x 2.5 Ni + Au 1871813-1 500 per Reel 2.7 3.9 6.0 10.3 x 4.7 Ni + NiPd + Au All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Battery Block Battery Block Features This battery concept allows for a stable battery connection in any circumstances. The plug side, which is mounted in the equipment, connects to the special connector in the battery. The battery side connector is equipped with two contact points per contact. The U-shaped contact always keeps the forces in the connector. The special construction of the connector allows for hinged or sliding mating of the battery pack. The small size of the complete system makes it ultimately suitable for mobile applications. 0.7 0.7 6.6 Receptacle: Part No. 1612901-1 Package Quantity: 1700 Pieces per Reel 1.2 3.0 4.0 Material and Finish Insulator: Thermoplastic, UL 94 V-0, black color 2.0 0.7 PCB Layout 7.4 Contact Pin: Copper alloy 2.0 2.0 3.0 Contact Plating: Selectively plated gold over nickel and gold-flash in solder area 0.55 1.5 2.6 0.75 2.75 0.55 1.55 0.6 Documentation 0.5 Drawing: C-Part No. 6.5 Product Specification: 108-5846 5.5 Plug: Part No. 1612898-1 Package Quantity: 75 Pieces per Tube Test Report: 501-5452 4.8 3.4 Plug: Part No. 1612898-1 4.4 2.0 4.9 2.0 Receptacle: Part No. 1612901-1 2.0 2.0 2.2 0.75 1.4 5.4 5.3 1.8 3.8 0.8 2.6 1.6 0.9 1.8 5.9 0.5 All specifications subject to change. Consult Tyco Electronics for latest specifications. PCB Layout 43 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Inboard SMIA 85 Camera Socket Inboard SMIA 85 Camera Socket Features Inboard SMIA 85 Camera socket according to the SMIA standard. For camera modules with 8.5 x 8.5 mm footprint. * Fully-shielded camera socket * Inboard allows for "flat" phone design * Grounding fingers to camera module * Keying feature and optical identification feature * Large pick and place possibility inside * Grounding clips Material and Finish Insulator: LCP, black color Contact Pin: Phosphor bronze Part No. 1857258-1 Package Quantity: 800 Pieces per Reel Contact Plating: Selectively plated gold over nickel Shields: Phosphor bronze Top Shield Plating: Selective gold over nickel 11.2 13.8 Bottom Shield: Tin over nickel 0.9 0.8 Documentation Drawing: C-1857258 Product Specification: 108-19297 0.95 0.25 1.1 10.2 8.3 11.8 13.1 Application Specification: 114-19101 10.8 3.05 5.45 0.5 10.3 13.3 PCB Layout 44 All specifications subject to change. Consult Tyco Electronics for latest specifications. 14.1 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Onboard SMIA 85 Camera Socket Onboard SMIA 85 Camera Socket Features Onboard SMIA 85 Camera socket according to the SMIA standard. For camera modules with 8.5 x 8.5 mm footprint. * 4x camera module locking clips * Grounding to the camera by clips * Overmolded contacts * Keying and optical identification feature Material and Finish Insulator: PA, black color Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel Shields: Copper alloy Part No. 1857346-1 Package Quantity: 1000 Pieces per Reel Shield Plating: Selective gold over nickel Documentation 10.3 Drawing: C-1857346 10.55 Product Specification: 108-19297 Application Specification: 114-19101 10.0 9.4 10.6 1.6 9.5 5.03 0.4 10.3 PCB Layout All specifications subject to change. Consult Tyco Electronics for latest specifications. 45 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Super Low Profile (SLP) Connector Super Low Profile (SLP) Connector Features This super low profile cable-toboard connector requires very little space for high density and small size mobile electronics. For your one stop shoping, various cable assemblies are provided to best suit your application. Applicable Cable Wire Size: AWG 32 Diameter: 0.39 mm Material and Finish 5.7 Insulator: Thermoplastic, Black (Board Connector), Beige (Receptacle Connector) PCB Layout 3.3 Contact Pin: Copper alloy Shields: Copper alloy 1.6 3.9 3.58 Contact Plating: Board Connector: 1.3 m min. nickel underlayer, 0.3 m min. gold at mating side 0.05-0.20 m gold at solder side Receptacle Connector: Gold plating 5.3 1.6 0.8 Board Connector 1.4 1.7 Shield Plating: Selective gold over nickel 3.2 2.3 Documentation 1.5 0.3 Drawing: See table Product Specification: 108-5822 Test Report: 501-5593 2.05 3.55 Application Specification: 114-5357 0.8 Cable Assembly (Example) 1.1 46 1.33 All specifications subject to change. Consult Tyco Electronics for latest specifications. Plug: Part No. 1612537-1 Receptacle: Part No. 1612534-1 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Micro SLP Connector Micro SLP Connector Features This connector is applied for interconnection to speakers, receivers or other small devices in Mobile equipment. * Low Profile, Mating Height = 1.4 mm * Contact Pitch = 0.8 mm * Applied Wire Size: AWG 32 * Double slot mass termination * Double latch concept, contact and housing * Special latch design ensures good tactile feedback * Size (H x W x L): 1.4 x 2.85 x 4.66 mm * Design ensures contact protection during mating Material and Finish Insulator: Thermoplastic resin Contact Pin: Phosphor bronze 2.65 Contact Plating: 0.3 m gold over 1.3 m nickel in contact area, gold-flash plating in solder area 4.4 Shields: Copper alloy 1.0 2.85 1.1 2.85 Shield Plating: Selective gold over nickel 4.3 Documentation 0.8 Drawing: C-See table 0.7 1.1 1.4 Product Specification: 108-78466 Test Report: See Product Specification 1.5 2.95 4.7 PCB Layout Application Specification: 114-5426 Cable Assembly Plug: Part No. x-1981812-x Receptacle: Part No. 1981813-1 Package Quantity: 4000 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 47 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 STAXTM LD Elastomeric Connectors Product Facts Single piece compression connector STAXTM LD Elastomeric Connectors Surface-to-Surface Compression Connection for Board Stacking Applications Contact pitch as lows as 0.8 mm No. of rows of contacts: 1 through 5 (two rows shown to the right) No. of Contacts: 1-200 Board Separation: 0.5-8.0 mm Shielding Capability Performs in high-speed applications (3 GHz) Low resistance Current Capability: 1 Amp typical with higher capability possible with modification Easily modified standard designs Facilitates automatic assembly, rework, and field upgrades Compatible with tin and flash gold contact metallurgy Rugged and reliable Dual-Row STAX Connector connects two rows of contact pads. Retention slot is provided in PCB separator. Modifications & Options Elastomeric connectors are viable in most applications where traditional board-board connectors are used. The applications may include high speed, power, digital, grounding/shielded interconnect. The flexible elastomeric manufacturing process allows a fast, easy modification of the products to suit the individual needs of the application. Typically with an elastomer-only solution there is no tooling. There are requirements for minimum production volume. The elastomer is a single piece compression technology. The silicone within the connector provides the normal force (spring). The conductive layers (blend of silicone and silver particles) make redundant electrical contact to the pads on the board. The STAX LD technology is based upon 30 years of experience in manufacturing and in the hundreds of millions of connectors used in troublefree applications. This is a low durometer and low contact resistance product. 48 Tyco Electronics maintains complete control over the quality and performance of the product. The STAX product line is manufactured from basic raw materials (silver or gold, and silicone) using a proprietary manufacturing process. The result is a connector technology that allows the freedom of design without the traditional limitations of standard product availability. There is no need to compromise the end product at the design stage. Mechanically, the elastomeric capabilities are flexible. The technology can meet PCB area requirements in applications of board separations under 8.0 mm. Electrically, resistance and current ratings are competitive with most alternative technologies. All specifications subject to change. Consult Tyco Electronics for latest specifications. How STAX Elastomeric Connectors Work STAX elastomers are zero insertion force connectors that do not require soldering. They provide a compliant surface-to-surface compression connection when deflected between opposing mirror-image pad patterns. Products for Mobile Equipment Connectors STAXTM LD Elastomeric Connectors STAX elastomers are composed of alternating layers of conductive and non-conductive silicone rubber. Silicone rubber is the base material because it has excellent aging properties, chemical stability, electrical reliability, and superior performance in shock and vibration. It also provides a gasket-like seal to protect the contact surfaces. The conductive layers consist of tiny metallic particles dispersed in silicone rubber. Within each of the conductive layers, the metallic particles create thousands of conductive paths. Therefore, each conductive layer provides multiple points of contact at the substrate interface. While the conductive layers ensure contact between mating pads, the non-conductive layers isolate the conductive layers from each other. The alternating STAX construction, 200 conductive layers per inch (8 per mm), allows multiple conductive layers to make contact to a single contact pad while the non-conductive layers electrically isolate adjacent contact pads. The advantage of this material construction is that you achieve 3-4 conductive layers typically making contact to a single contact pad on the board. A single elastomeric strip (element) is used to connect an entire row of contacts. The multiple layers coupled with the thousands of conductive paths in each layer ensure reliable interconnect. Why use a Tyco Electronics Elastomeric Connector 1 - Simple Implementation Assembly is easy as making a sandwich. There is no soldering, no special tooling or machinery. 2 - Easily Modified How often is a standard offthe-shelf connector ideal for your application? Smaller height, higher I/O, greater current capacity, lower resistance, less PCB area are all modifications that can be made. 3 - Fast The flexible elastomeric manufacturing process allows quick turn on prototypes (1 week) to test solutions and rapid ramp on production. Prototypes are made with the same process as production. 4 - No Tooling An elastomer-only approach allows the customer to implement the housing and alignment features within existing plastic or metal structure. Modifications of elastomer length, height, and width do not require tooling. 5 - Reliability Tyco Electronics elastomeric products have been tested to the following: * * * * * * * * MIL STD-1344 IEC-68-2 EIA-364 MIL STD-202 JIS C 0020 JEIDA 38 INTEL SPEC 5.1, 5.2 NUMEROUS CUSTOMER ACCELERATED LIFE TESTING (ALT) Test data available on request. 6 - Product Support Tyco Electronics product engineers work directly with customer engineering teams on modifications and custom solutions for volume applications. All aspects of the design and implementation of the product are reviewed to ensure a successful product launch. Custom Capability Application requirements vary dramatically across the many industries that elastomers are used. The technology is flexible in adapting to many of these requirements but, as with any product, there are limits. Catalog 1654270-2 Revised 8-2007 (continued) 1. Determine if an Elastomeric Connector is appropriate for the Application a) Board-Board separation > 8.0 mm? An elastomer cost is tied closely to material usage (precious metals). In application greater than 8 mm elastomers lose their price competitiveness. b) X-YAlignment (>0.25 mm)? Unlike a mechanical malefemale connector an elastomer cannot perform the alignment of the system. The reference drawings show how pins can provide satisfactory alignment. Other methods can achieve the same result. c) Sliding Contact? Silicone by the nature of the product has a high coefficient of friction. Sliding a contacting surface across the elastomer will not be reliable. d) Contact Pitch: <0.8 mm? Since an elastomeric connector depends on the alignment of the mating surfaces by an external means, contact pitch <0.8 mm is not easily achievable. However, board real-estate is minimized by achieving more closely-spaced rows of contacts pads than fine-pitch connectors. 2. Determine if "holder" functions can be integrated within existing structure? application engineers are avail-able to assist in: * Defining customer furnished housing requirements. * Providing design input for: * Alignment * Deflection * Pad layout * Final elastomer dimensions 3. Can Tyco Electronics supply a complete Connector Solution? Yes. These solutions can take the form of simple holders with STAX connectors held in place by: * Localized interference * In-molding * Grafting The holder or frame can be plastic, silicone rubber, or metal and typically has low tooling investment: Below are examples of complete connection solutions in challenging applications. Circular Connector Grafted 160 Pos. (LCP Frame) Ultra-Low Profile Inmolded 8 Pos. 0.5 mm Height Silicone Rubber Base The holder is synonymous with the plastic that surrounds traditional mechanical connectors. The most efficient and cost effective way to implement a STAX connector is by incorporating a retaining slot into an existing housing or board separator as shown on the reference designs. In an approved application, Elastomeric Technologies All specifications subject to change. Consult Tyco Electronics for latest specifications. Module-to-Board Grafted 220 Pos. Peripheral Contact Ultem Frame 49 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 STAXTM Array Connector STAXTM Array Connector Features Allows connection to non-standard pad patterns without tooling and long lead time for custom connector. * Long term reliability and durability * Economical * One piece connector * Custom prototype samples within 1 week Physical Properties Height: 0.5-1.5 mm Minimum Pad Pitch: 0.8 mm Individual Conductor Width: 0.063 mm Individual Conductor Length: 0.25 mm Typical Electrical Properties Contact Resistance1) : 50 m Dielectric Constant: 3.1 Insulation Resistance1) : 1012 min Dielectric Withstanding Voltage1) : 1000 V without breakdown or arcing The STAX Array connector is an anisotropic conductive mat material that was developed to interconnect land grid array pad patterns as well as random, circular or other non-linear circuit board pad patterns. As long as the material is deflected between two mating mirror image pad patterns electrical connection is made between the mirror image pads. Using our core competency in laminating silicone, the Tyco Electronics Elastomeric Technologies product line has created a mat material having .063 mm (0.0025) x 0.25 mm (0.010) conductive silicone segments surrounded on all sides by 0.063 mm thick nonconductive silicone insulation. As long as a minimum of 0.4 mm separation is maintained between adjacent pads on the mating surface, shorting is avoided. STAX array connectors are very easily customized to the users required dimension and can be made in either rectangular or die-cut shapes. Z-axis thicknesses between 0.5 mm and 1.5 mm and dimensions from 2 mm x 2 mm to 60 mm x 60 mm can be accommodated. Current Carrying Capacity1) : 0.5 A Deflection Force: 0.5-1.5 Newtons/mm2 Environmental Parameters Operating Temperature: -40 C to +125 C Moisture: 0 to 100% RH Test Report: TR 368 1 ) Elastomer: 1.0 mm (0.039) high. Boards: Gold plated contact pads 0.5 mm (0.020) wide on 1.0 mm (0.039) pitch. 50 Part No. 3-1442003-2 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 ElastibootTM Connectors for Microphones ElastibootTM Connectors for Microphones Features * Boot and STAX elastomeric connector are together as one inseparable piece. * Elastiboot allows microphone to be provided as an assembly complete with acoustic boot and STAX compression-style connector. * Large deflection range of 5 thru 50%. * Standard Elastiboots available for smaller industry-standard leadless microphones of 4.0 and 6.0 mm diameter. * Elastiboot uses reliable, superior performing Tyco Electronics STAX elastomeric compression connectors. * Custom, application specific designs can be created. The Tyco Electronics line of Elastiboot connectors combines an elastomeric connector with an acoustic grommet or "boot" for industry standard 4.0 and 6.0 mm diameter leadless microphones. In a continued effort to lower the cost of hand-held electronic devices, high volume manufacturers are looking for value added sub-assemblies from their component suppliers. Physical Properties Elastiboot connectors from the Tyco Electronics Elastomeric Technologies product line fill this need by providing ease of assembly in connecting small form-factor microphones to host PCBs. Elastiboots combine the connector with the acoustic grommet (or "boot") to create a one-piece, orientation free subassembly. Height: See chart Elastiboot connectors make assembly of microphones into portable electronic devices economical and robust. Minimum Pad Pitch: See PCB drawings Microphone is placed into Elastiboot connector. Elastiboot/Microphone assembly is placed in cavity in front housing of mobile unit. Makes blind-mate connection to concentric-ring pads on PC Board during final assembly of unit. Concentric-ring pad layouts allow for orientation-free assembly. Elastiboot connector captures microphone while providing electrical connection and acoustic sealing. STAX Conductor Width: 0.064 mm (.0025) STAX Conductor Pitch: 0.127 mm (.005) Environmental Parameters Operating Temperature: -40 C to +125 C Moisture: 0 to 100% RH Test Report: TR 341 Elastiboot with Seal Ribs Elastiboot without Seal Ribs Typical PCB Pattern for 4.0 mm Diameter Microphone Typical PCB Pattern for 6.0 mm Diameter Microphone Part Number Microphone Outer Diameter/ Thickness (mm) STAX Type Seal Ribs Diameter Max. Cavity Depth Mated Height 2-1442003-2 4.0 / 1.0 LD Yes 5.17 1.60 5.26 6-1442001-3 4.0 / 1.85 LD No 5.12 2.60 5.37 9-1442002-7 6.0 / 1.0 Gold Yes 7.37 1.35 7.46 5-1442003-9 6.0 / 1.0 LD Yes 7.37 1.35 7.46 1-1442002-5 6.0 / 1.3 SD Yes 7.50 1.70 7.65 9-1442000-8 6.0 / 1.5 SD Yes 7.50 2.26 7.66 8-1442001-6 6.0 / 2.2 LD No 7.30 2.30 7.44 6-1442001-0 6.0 / 2.2 LD Yes 7.50 2.30 7.50 Dimensions for Cavity in Host (above) (mm) All specifications subject to change. Consult Tyco Electronics for latest specifications. 51 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 STAXTM Elastomeric Connectors for COG LCDs STAXTM Elastomeric Connectors for COG LCDs Features * Easily customized. * Connects display glass or flex circuit to PCB. * Inhibits movement of the contact interface during vibration. * Stable electrical performance over a wide working range of deflection. * Can accommodate glass-toboard separations of as little as 0.25 mm. * Applications engineering support from Tyco Electronics to incorporate STAX elastomeric connectors into your product. Support includes board layout, slot definition, alignment and compression. * In-molded sub assemblies can be created to combine LCD connector with backlighting connection while providing orientation features. Physical Properties Low resistance STAX elastomeric connectors are the best means of connecting to Chip-on-Glass and other types of LCD modules. Gold STAX and STAX LD elastomeric connectors are easily customized without the tooling charges and lead times typically found with stamped contacts and molded insulators. They can be retained in a slot incorporated into the light guide that allows for automatic placement of the light guide subassembly. STAX connectors provide a gasket-like contact interface to the ITO traces thereby sealing the interface from the environment. At the same time, the compliant sealing properties of the silicone elastomeric connector maintain intimate conformal contact to the ITO surface. STAX connectors have proven reliability in COG LCD displays for cell phone units - numbering in the hundreds of millions. STAX LD - Force vs Deflection vs Resistance Curve Height: 0.5-12.7 mm (.020-.500) Minimum Pad Pitch: 0.50 mm (.020) Conductor Width: 0.064 mm (.0025) Conductor Pitch: 0.127 mm (.005) Typical Electrical Properties Contact Resistance: See chart Dielectric Constant: 3.1 Insulation Resistance: 1012 min Dielectric Withstanding Voltage1) : 1000 V without breakdown or arcing Gold STAX - Force vs Deflection vs Resistance Curve Current Carrying Capacity: 1 Amp Environmental Parameters Operating Temperature: -40 C to +125 C Moisture: 0 to 100% RH Technical Documents Engineering Test Report: TR 341 52 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 SMT-ETI-1 STAXTM Connector SMT-ETI-1 STAXTM Connector Features * Surface Mount / Pick-n-Place * Tape & Reel or Bulk Packaging * Low Resistance: 20 Ohm * Deflection Range: 5-65 % * Long term reliability and durability * Economical * Readily customized (Hd: 1.0 to 2.25 mm ) * No tooling required * One-piece connector * Quick delivery custom prototype samples Physical Properties Deflected Height: 1.0-2.5 mm (.039-.098) Minimum Pad Pitch: 3.0 mm (0.120) Elastomer Width: 1.00 0.10 mm Tyco Electronics Elastomeric TechnologiesTM continues to demonstrate technology leader-ship with the introduction of the INDUSTRY'S FIRST surface-mount elastomeric connector product. The SMT-ETI-1 is a dedicated single position connector used in lieu of a spring-finger, pogo-pin, or compliant materials in portable electronic and communication devices. The applications include grounding, power connection, and shielding to eliminate EMI and RFI. The SMT-ETI-1 is an integration of Tyco Electronics' ETI and MID technologies: Elastomer Length: 1.95 0.15 mm The surface mount holder is a gold plated plastic and provides a low profile - small form factor "standard" base. Conductor Pitch: 0.127 mm (.005) A STAXTM HT (high temperature resistant) elastomer is grafted into the SMT holder for a single-piece assembly. Pad Dimensions: See below Typical Electrical Properties Contact Resistance1) : 20 m Current Carrying Capacity1) : 2 Amps 1) Test Boards: Gold plated contact pads A STAXTM elastomer has the widest range of deflection in low profile connection (5 thru 65 %) while maintaining consistent performance and reliability. Combining the standard base with the flexibility of the elastomeric manufacturing process allows for an optimized connector for each application. This minimizes the deflection forces while compensating for z-axis tolerances. The silicone provides the normal force of the connector, seals the contact interface, and even conforms to irregular surfaces. Standard parts are available - modifications can be easily created. 3.4 1.0 2.5 Part No. 1-1442004-7 1.5 2.4 The electrical characteristics of the SMT-ETI-1 rival all competitive technologies in resistance and current carrying capacity. Environmental Parameters Operating Temperature: -40 C to +125 C Moisture: 0 to 100% RH The SMT-ETI-1 STAX connector features silver particles embedded within a low durometer silicone. Within each of the conductive layers, the conductive particles create thousands of conductive paths. Each conductive layer provides multiple points of contact to the substrate interface. The pitch of the conductive layers is only 0.127 mm (0.005), allowing multiple conductive layers to make contact to each substrate pad. Top PCB Contact Pad (Flash-Gold) Dimensions 2.5 3.4 Technical Documents Qualification Test Report: TR 371 Bottom PCB Contact Solder Pad Dimensions All specifications subject to change. Consult Tyco Electronics for latest specifications. 53 Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 STAXTM Coax Connector STAXTM Coax Connector Features * Low cost, low height and high performance * Low insertion loss 0-0.5 dB from 0-6 GHz * VSWR <1.07 from 0-6 GHz * Wide working range of deflection * Long term reliability and durability * Surface mount / pick and place * Low board separation < 2.5 mm * Technology can support board separations <1.5 mm * Easily modified free height * No tooling required for height modifications * Modified prototype samples within 2 weeks Tyco Electronics' STAX coax connector is the first surface mount RF coax connector on the market that uses elastomeric connector technology to provide an economical means to achieve low board separation while maintaining excellent RF signal integrity between PCBs. The connector uses laminated sections of conductive and non-conductive silicone that are tuned to provide a 50 ohm impedance line between mated substrates. The single piece construction of the STAX coax connector eliminates some of the signal anomalies normally associated with mated pairs of metal contact coax connectors. The dimensional relationship of the inner and outer conductor is consistently maintained throughout the connector. With its metal holder, the STAX coax connector can be surface mount soldered to the PCB. An additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment is already maintained by other means, the coax connector may not need the additional mating receptacle and can become a blind-mating connector. This has an additional advantage in space constrained mobile applications where very fine-pitch board-to-board connectors are also used. 619229-1 SMT STX Coaxial Connector Assembly PCB Pattern Physical Properties Board Separation: 2.5 mm 0.2 (Standard Part) Center conductor PCB Board Area: 4.0 mm diameter Dielectric material board Outer conductor Solder ring Environmental Parameters Solder mask Operating Temperature: -40 C to +125 C Moisture: 0 to 100% RH Electrical Properties Conductive elastomer outer conductor Conductive elastomer inner conductor Non-conductive elastomer Contact Resistance: < 50 m Insulation Resistance: 1012 min 619238-2 SMT Mating Target Holder PCB Pattern for Mating Target Dielectric Withstanding Voltage: 1000 Volt Center conductor Technical Documents Dielectric material board Outer conductor * Qualification Test Report - TR 368 * RF Performance Report - 00266 Solder ring Solder mask Part No. 619229-1 Part No. 619238-2 Part No. 1442004-1 54 STAX SMT Coax Connector Assembly: Consists of STAX coax elastomer in round SMT holder. Mating SMT Target Holder: Controls alignment between PCBs STAX Coax Elastomer only: Used with customer furnished holder All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Connectors Catalog 1654270-2 Revised 8-2007 Vibration Motor Connector Vibration Motor Connector Features * Flexibility to modify the standard product offering to meet custom applications * Eliminates obsolete inventory due to changing application requirements * Minimize PCB space * Eliminates fretting corrosion issues * Enables single piece assembly * Eliminates troublesome soldering of wires or use of male / female connectors * Eliminates the need and time to tool many different spring contacts * Economical * Long term reliability and durability * Custom prototype samples within 2 weeks Tyco Electronics' vibration motor elastomeric assembly is an innovative option to standard motor attachment methods using our proven STAXTM layered elastomeric connector product line. Hundreds of millions of our STAX family of connectors have been used to connect flex circuits, LCD's, microphones, and speakers within spaceconstrained products such as mobile phones, pagers, PDAs and disk drives. This solution allows the compression mate of a vibration motor to almost any printed circuit board. The STAX connector consist of alternating layers of conductive and non-conductive silicone. These layers are typically 0.064mm thick on 0.127 mm centers and make redundant surface-tosurface connection when deflected between the flat contact pads on the vibration motor to the main PC Board. Vibration motor connectors provide a excellent combination of electrical performance, reliability, functionality and durability. Physical Properties Application Deflected Height: 8.7 .02 mm (.342 0.008) Compression Force: 0.4 kg (nominal deflection) Grommet Material: Silicone Rubber (55 Shore A durometer) Typical Electrical Properties Standard Voltage: 1.3 V DC Rotating Direction: Clockwise Standard Load Rotation: 9000 2000 Standard Load Current: 105 mA Starting Current: 130 mA max Insulation Resistance: 1 Mega Ohm Environmental Parameters Operating Temperature: -10 C to +60 C Moisture: 0 to 100% RH Part No. 6-1442002-7 Part No. 7-1442002-3 Part No. 7-1442002-2 Part No. 7-1442002-1 Vibration Motor Connector Assembly Rubber Vibration Motor Boot Sanyo Motor # RS-2561 Elastomeric Silver STAXTM Connector All specifications subject to change. Consult Tyco Electronics for latest specifications. 55 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 56 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Antenna Products Catalog 1654270-2 Revised 8-2007 Antenna Manufacturing Capabilities Tyco Electronics Antenna Products combines world class antenna design competency with unsurpassed integration and optimization skills to provide the best integrated solutions for various applications. Our global footprint and wide variety of manufacturing technologies allows our customer s to be able to choose from a large base of manufacturing technologies and factory locations. Applications Voice Tyco Electronics Antenna Products provides handset OEM's with the highest performing, lowest cost embedded antenna solutions. With over 500 million Tyco Electronics cellular handset antennas designed and manufactured to date, we offer the worldwide spectrum of frequencies required to support cutting edge embedded antenna solutions. In addition to the handset segments, the digital cordless telephone segment presents secondary voice capability for Tyco Electronics. As this market continues its evolution into the 900 MHz and 2.4 GHz frequency bands, Tyco Electronics Antenna Products is positioned to provide cutting-edge embedded antenna solutions. Data Rapid growth in the wireless data market is creating unprecedented demand for embedded antenna solutions. With the proper antenna, these devices can offer "any time" wireless access. Data devices that utilize Tyco Electronics Antenna Product embedded antennas are PDAs, laptops, access points, bar code scanners, compact flash cards, PC cards, printers, print servers, cameras, etc. The Tyco Electronics Antenna Products Group has developed an entire line of high performance, low cost embedded antennas for wireless data applications. Tyco Electronics has a variety of cutting-edge " off the shelf" and customized embedded solutions for virtually any wireless device. Covering 802.11a/b/g/n, WLAN, WWAN, WiBro, WiMAx, WiFi, DVB and UWB applications. Bluetooth Bluetooth is revolutionizing the communication industry. It facilitates fast and secure transmissions of voice and data even when devices are not within line-of-sight. Devices include mobile phones, computers, cameras, printers and virtually any device that has information to communicate. The Tyco Electronics Antenna Products Group is at the forefront of Bluetooth antenna development with a number of standard antenna products that are already being utilized in the first generation Bluetooth devices on the market. All specifications subject to change. Consult Tyco Electronics for latest specifications. 57 Products for Mobile Equipment Antenna Products Catalog 1654270-2 Revised 8-2007 Antenna Manufacturing Capabilities Three Key Technologies MID (Molded Interconnect Device) Antennas In 2000, Tyco Electronics acquired Molded Interconnect Device, LLC (MID). Now part of Tyco Electronics Antenna Products, MID is headquartered in Rochester, NY and prides itself in being the world's leader in utilizing its technology to make everyday products better. With over 500 million parts in service, our products are being utilized in applications ranging from joysticks to cell phones as well as minivans to airplanes. In its most basic form, MID technology can be defined as any product that results in selectively plated plastic parts. This technology results in outstanding repeatability, which is ultimately suitable for the design and production of complex shaped antennas. MID Two Shot Antennas Design flexibility for 3D patterning Fewest manufacturing steps and processes Repeatability of manufacturing process Ability to integrate multiple functions Flexible manufacturing capacity Manageability of demand increases Simple low cost standardized interconnect utilized Best utilization of the 3D space that is available Tightest tolerances for pattern registration Stamped Metal and Overmolded Tyco Electronics Antenna products has developed a line of low profile, high performance Stamped Metal embedded antenna solutions for single-, dual-, tri-and quad-band applications. Tyco Electronics Stamped Metal antennas offer OEMs, a low cost and highly repeatable manufacturing solution, in a number of standard "of the shelf" and customized antenna designs. Our stamped embedded antennas address the needs of a variety of applications from 400 MHz to 5 GHz such as; mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and wireless networking (Bluetooth, 802.11 and ISM). Stamped Antennas Stamped and heatstaked Stamped and overmolded Pure stampings Typically the lowest cost antenna technology when considering the interconnect cost as well Interconnect can be designed in (contacts) Production die is high volume capable Hand assembly stations can be added for volume upswings 58 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Antenna Products Catalog 1654270-2 Revised 8-2007 Antenna Manufacturing Capabilities FPC and Printed Wiring Boards (PWB) Antennas The Tyco Electronics Antenna Products Group has developed a line of low profile, high performance Print Wiring Board (PWB) antenna solutions for single-, dual-, tri-and quad-band applications. Allowing virtually any wireless product to operate on different frequencies without multiple antennas. Our FPC and PWB antenna solutions address the need of a variety of applications: mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and wireless networking (Bluetooth, 802.11 and ISM). FPC and PWB Antennas Pure FPC / PWB FPC on a carrier Best flexibility for pattern changes during production More ability to quickly tool to higher demand during production All specifications subject to change. Consult Tyco Electronics for latest specifications. 59 Products for Mobile Equipment Antenna Products Catalog 1654270-2 Revised 8-2007 RF Engineering Capabilities Antenna Design at Tyco Electronics Tyco Electronics gets the optimal performance out of antennas by applying system-level integration and optimization design expertise to each wireless application. Our practical application and simulation skills are second to none with global expertise in the U.S., Europe, and Asia. Our global presence places antenna design experts next to the customer. Modeling and Simulation 3D Part Design at Tyco Electronics Modeling and Simulation Need info Pro Engineer Wildfire 2.0 CAD software Auto CAD 2005 MPA Moldflow to predict moldings behaviors Pro Mechanica stress and thermal analysis software Customer Support and Design Integration Tyco Electronics provides world class antenna design integration and optimization to its customers. Tyco Electronics prides itself in working with customers to optimize not only the antenna performance but also the total system performance. The earlier that Tyco Electronics can be involved in an integration project, the more opportunities there will be to deliver the most optimal solution. Six Step Integration Process Evaluation: Is the customer's expectation reasonable? Modeling: Utilizing Ansoft HFSS Rapid Prototyping: Are we making electrically working samples or just dummy mechanical samples? Prototypes can be made in 1 week. Testing & Optimization: Do we have the real device and is it the latest version? Production: Pick the manufacturing technology after the design is developed and fully understanding our customer's goals Quality Assurance: Our quality focus is inherent throughout the entire design process and product life cycle. 60 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Antenna Products Catalog 1654270-2 Revised 8-2007 RF Engineering Capabilities RF Engineering Capabilities Six Anechoic Chambers One Satimo Near Field Spherical Measurement Chamber Satimo Upgrade for mobile phone compliance testing Narda(R) SAR Measurement Equipment FEM Electromagnetic Modeling (Ansoft HFSS) One CTIA compliant 3D test chamber Network analyzer to 20 GHz for Laptop programs RF Engineering Locations: US China Japan Taiwan Korea Europe Aptos, California All specifications subject to change. Consult Tyco Electronics for latest specifications. 61 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 62 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment MID Technology Catalog 1654270-2 Revised 8-2007 MID MID Technology at Tyco Electronics Tyco Electronics prides itself in being the global leader in providing Molded Interconnect Technology (MID). In it's most basic form, MID technology can be defined as any product that results in selectively plated plastic parts. This technology can be used in three basic ways, to solve 3-dimensional electro-mechanical problems, for shielding purposes, or to develop antennas. Two Shot MID Technology Two Shot Sequential injection molded substrate A plateable resin and a non-plateable resin Imaging in the molding process All electroless plating of catalyzed surfaces MID Technologies Tyco Electronics can manufacture MID parts using three manufacturing technologies, Two Shot, Laser Imaging, and Laser Direct Structuring. Laser Imaging MID Technology Laser Imaging today is typically only used for rapid prototyping Manufacturing using a circuit board production type process Machine or single shot mold in 3-10 days Laser image circuitry in 3-5 days Circuitry and plating are accurate to production processes All specifications subject to change. Consult Tyco Electronics for latest specifications. 63 Products for Mobile Equipment MID Technology Catalog 1654270-2 Revised 8-2007 MID Laser Direct Structuring Technology Laser Direct Structuring (LDS) Technology Offers the ability to create parts with finer line width and spacing than conventional MID processes will allow for. The structure is molded in a standard single shot mold using one of several proprietary plastics available. Desired interconnect pattern is directly written on the resulting molded part and the conductive paths are plated using industry standard methods. The plating adheres only where the plastic has been activated by the laser. 3D Part Design Tyco Electronics provides its customers vast design expertise over a wide variety of manufacturing technologies. Our design engineers are experts in two shot design and product integration for MID products. Optimal solutions are engineered with the appropriate MID technology to best suit the application. Modeling and Simulation Tyco Electroniocs employs the most up to date design tools available. We use sophisticated 3D modeling and simulation packages to accurately manufacture and predict the end product. Pro Engineer Wildfire 2.0 CAD software Auto CAD 2005 MPA Moldflow to predict molding behaviors Pro Mechanica stress and thermal analysis software 64 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Cable Products Catalog 1654270-2 Revised 8-2007 USB Data Cable Assembly USB Data Cable Assembly Features USB Data cable intend to connect a mobile phone to computer etc. Can be used as charger Connector and cable are approved by USB Org. PU and PVC cable, both types are available. Connector USB A Type USB B Type Mini USB A Type Mini USB B Type Can design the connector to mate customer system USB Cable Assembly Cable 1P+2C+AL+D+B USB 2.0 28 AWG x 28 AWG 28 AWG x 26 AWG 28 AWG x 24 AWG 28 AWG x 22 AWG 28 AWG x 20 AWG Overmolding PVC PVC Free/PU Connectors All specifications subject to change. Consult Tyco Electronics for latest specifications. 65 Products for Mobile Equipment Cable Products Catalog 1654270-2 Revised 8-2007 Music Cable Assembly Music Cable Assembly Features Audio cable intend to connect a mobile phone to the line-in on a stereo amplifier. PU and PVC cable, both types are available. Connector RCA Plug 2.5 mm Audio Plug/Jack 3.5 mm Audio Plug/Jack Adapter from Plug to Jack Can design the connector to mate customer system. Cable Twin Cable Shielded Twisted Pair Cable Music Cable Assembly Overmolding PVC PVC Free/PU Connectors 66 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Cable Products Catalog 1654270-2 Revised 8-2007 Charger Cable Assembly Charger Cable Assembly Features The semi-goods or finished goods intend to be used for the charger. PU and PVC cable, both types are available. Connector USB Plug 2.0 mm DC Plug 3.5 mm DC Plug Can design the connector to mate customer system. Cable Can follow customer specification. Charger Cable Assembly Overmolding PVC PVC Free/PU Connectors All specifications subject to change. Consult Tyco Electronics for latest specifications. 67 Products for Mobile Equipment Cable Products Mobile Phone Headset Solution Mobile Phone Headset Solution Speaker Diameter: 15 mm Impedance: 16 15% Frequency Range: 20 Hz up to 20 KHz Sensitive: 108 4dB at 1 kHz Nominal Power: 3 mW Maximum Power: 5 mW Connector 3 Pin, gold or nickel plating Cable Length: 400 15 mm Pull Force: 30 N/min Flexing Cycle: 3000 times/300 g Non-Migration: PS 60, 500 g/72 H Cover: PVC Color: Grey/Silver 68 All specifications subject to change. Consult Tyco Electronics for latest specifications. Catalog 1654270-2 Revised 8-2007 Products for Mobile Equipment Cable Products Catalog 1654270-2 Revised 8-2007 Bluetooth Hands-Free Solution Bluetooth Hands-Free Solution Key Features Continuous Talk Time: 9 hours Standby Time: 400 hours (16 days) Weight: 12 g Voice Dial Redial Last Number1 Call Muting Multi Pairing2 Fast Charge 2 hours Reversible hook with anti allergic soft material for long hold. Bluetooth R v 1.2 Headset and hands-free profile compatible. For phones with hands-free profile function. For headsets which are both in the headset profile. Color: Grey/Black E11 Key Features Continuous Talk Time: 9 hours StandbyTime: 400 hours (16 days) Weight: 14 g Voice Dial Redial Last Number1 Call Muting Multi Pairing2 Fast Charge 2 hours Reversible hook with anti allergic soft material for long hold. Bluetooth v 1.2 headset and hands-free profile compatible. For phones with hands-free profile function. For headsets which are both in the headset profile. All specifications subject to change. Consult Tyco Electronics for latest specifications. 69 Products for Mobile Equipment Cable Products Catalog 1654270-2 Revised 8-2007 High-Speed Micro-Coax Cable Assembly (MCC) High-Speed Micro-Coax Cable Assembly (MCC) Features Thin cable thickness and fine pitch can save room for application. Multi-position can transfer 5 to 25 pairs of signal. High soldering quality makes high performance connect between cable and contact. Tyco Electronics has special know-how for whole assembly process. Tyco Electronics design the connectors by herself. Connector No. of Positions: 10, 17, 20, 30, 40, 44, 50 pos. are available to use. Pitch: 0.4, 0.5, 0.6, 1.0 mm pitch are available. Direction: Straight and 90 degree are available. Cable Gage: 30, 32, 36, 40, 42 AWG cables are available. Pairs: Single and Twin-Coax cables are available. Micro-Coax Cable Assembly Connectors 70 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Batteries Catalog 1654270-2 Revised 8-2007 Battery Systems The Leading Edge in Custom Power Solutions Designing and Building Battery Systems for Technology Tyco Electronics Battery Systems (TEBS) is a worldwide leader in the design and manufacture of custom battery packs and systems for any portable electronic device or stationary back-up power. A battery system is much more than a collection of cells. It is the source of the power that enables your products to their fullest potential. When you specify TEBS, you're getting a dedicated team of innovative designers, trained to devise the perfect solution within your power, space, weight and cost parameters. From Concept Through Total Design TEBS' worldwide engineering design team incorporates electrical, mechanical and chemical expertise to shorten the time required for design and development, ultimately reducing product delivery times. Our cutting edge technology can increase functionality while reducing size, weight and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match the battery system to the specifications of your products. Our unique program management system gives you a champion inside TEBS, charged with supervising the design process from concept through finished product. When you specify TEBS, you are buying the power to bring innovations to market, on time. Design Innovation With the goal of maximising compatibility with your product, our mechanical and electrical design team will use creativity and technology to provide the optimum solution. Our engineering and technical sales personnel are experienced in solving complex problems, validating the design steps to ensure downstream performance, and developing quality designs that work. TEBS' innovations deliver everything needed to get to market sooner, with an added competitive edge. From Concept Through Total Design At TEBS, we provide powerful solutions for a wide range of OEM applications, including: Cellular Telephones Laptop Computers & PDA's Power Back-Up (i.e. Mass Data Storage Units) Digital Still & Video Cameras Two-Way Radios Data Acquisition Test Equipment Medical Applications Handheld P.O.S. & GPS Outdoor Telecom UPS All specifications subject to change. Consult Tyco Electronics for latest specifications. 71 Products for Mobile Equipment Batteries Catalog 1654270-2 Revised 8-2007 Battery Systems Core Manufacturing Processes Cost effective and flexible manufacturing methods are at the core of TEBS' working methodology. Incorporating advanced production techniques and the most reliable and efficient equipment available in both manual and automated processes. TEBS' production techniques ensure the consistency and high performance of the finished product. Flexible, future proof processes allow large volume manufacturing capacities and a higher degree of repeatability in both quality and quantity of products. Integrating the best in both design and assembly, TEBS gives you a world-class combination in both service and technology. Testing and Qualification With a fully integrated professional battery pack and cell testing facility in Shanghai, China, TEBS provides complete in-house component and battery pack approval, typically covering cell, PCB and full product assemblies. Testing includes pre-compliance and planned compliance testing in safety, abuse, EMC, environmental reliability, performance and life testing through internal, customer and regulatory specifications and standards. In Shanghai, an array of environmental chambers, cell and pack cycling channels and other specialized equipment is housed in over 6,000 square feet of dedicated testing space. These unique independent testing capabilities offer our customers the ability to complete all of their required specification and environmental testing under one roof and enables TEBS to offer the complete turnkey power solution. The lab is approved by UL to conduct UL1642 and UL2054 testing and issue certification to both standards. TEBS also has senior level representation on the UL Standards Technical Panel (UL1642 & UL2054) and IEEE-P1725 Work Group. TEBS has the additional capability to conduct all UN/DoT testing in-house and provide the required certification documents. Global Commitment TEBS' world-wide engineering design team incorporates electrical, mechanical and chemical expertise to shorten the time required for design and development, ultimately reducing product delivery times. Our cutting edge technology can increase functionality while reducing size, weight and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match the battery system to the specifications of your products. Our unique program management system gives you a champion inside TEBS, charged with supervising the design process from concept through finished product. When you specify TEBS, you are buying the power to bring innovations to market, on time. 72 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Mechatronic Center Niefern Catalog 1654270-2 Revised 8-2007 Technology Portfolio Mechatronic Center Niefern Reel-to-Reel Stamping High-speed stamping 4 fold stamping tool, 70 mm width Advanced Tyco Electronics technologies allow us to produce highly competitive semi-finished products for card manufacturers of the 1st, 2nd and 3rd generation. Material: Copper alloy High-Speed Stamping Selective Plating Laminating Reel-to-Reel Over-Molding Reel-to-Reel Plating The products are delivered on a reel and can be used for chip mounting by our customers. Plating in 70 mm width Selective Metalization: Overall Ni Contacts Side: - Spots on contact area - Gold flash Bonding Side: - Strips or Spots Slitting in 35 mm Reel-to-Reel Lamination Clean room class 100,000 High accuracy dielectric stamping Mechanical alignment and prefixing of dielectric Leadframe roll lamination 100 % video control Reel-to-Reel Over-Molding Free cutting in line Multiple cavities mold Bonding Capability Guaranty All specifications subject to change. Consult Tyco Electronics for latest specifications. 73 Products for Mobile Equipment Mechatronic Center Niefern Catalog 1654270-2 Revised 8-2007 LAMFRAME LAMFRAME Key Features Low cost tape for memory and microprocessor applications Compatible with industry standard processes Allow wide range of dielectric (type and thickness) Optimisation of dielectric area for cost reduction Minimum Slit Size: 0.15 mm This technology allows Tyco Electronics to offer a wide range of products for memory and microprocessor smart cards with: Plating Finishes Gold "Grey like" plating Dielectric Polyimide Glass epoxy Polyester ... Customized thickness Disconnection option Lamination process is carried out in a clean room to avoid any outside contamination. Tyco Electronics is able to perform bonding tests with gold or aluminium wires during design phase but also to ensure the quality during all the life time of the products. Products are today customer specific, Tyco Electronics Open Design available. 74 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Mechatronic Center Niefern Catalog 1654270-2 Revised 8-2007 Mini SIM Card Packaging Mini SIM Card Packaging Tyco Electronics propose a new Packaging for the 3rd Generation of SIM Cards The leadframe is over moulded with a plastic package at dimension close to the final Mini SIM card body. This technology allows our customers to work directly on advanced product and use their standard available reel-to-reel equipments. Key Features Microelectronic can be made on semi final packaging, no module out cutting and embedding operation. Lower risk and process time improvement. Personalisation can be realized separately on tapes, and bring together by a final operation. No additional card body is needed, but also possibility to plug in 1st or 2nd card body generation. Produced with the Standard Tyco Electronics Technologies High-speed stamping Selective plating Laminating Reel-to-reel over moulding All specifications subject to change. Consult Tyco Electronics for latest specifications. 75 Products for Mobile Equipment M/A-COM Antenna Products Catalog 1654270-2 Revised 8-2007 GaAs SP6T 2.5 V Power Switch GaAs SP6T 2.5 V Power Switch Features M/A-COM's MASWSS0091 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch die. This switch is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. The MASWSS0091 is designed for dual-, tri-, and quad-band GSM and DCS/PCS handset systems that connect separate transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 GHz requiring high power at low control voltage. 0.82 1.01 Functional Schematic Die Layout GaAs SP3T 2.6 V CDMA/GPS Switch GaAs SP3T 2.6 V CDMA/GPS Switch Features M/A-COM's MASWSS0191 is an industry leading GaAs PHEMT MMIC single pole three throw (SP3T) CDMA-GPS switch in a 2 mm 8-lead STDFN package. The MASWSS0191 is uniquely configured to enable switching from a common antenna port to CDMA cellular, CDMA PCS, or GPS ports. The design is asymmetric and has been fully optimized for excellent cross modulation performance in CELL and PCS paths while still maintaining excellent insertion loss and isolation. The MASWSS0191 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. 2.0 2.0 Functional Schematic 76 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Lithium Cells and Battery Packs Lithium Cells and Battery Packs External shorts, runaway charging conditions, or abusive charging can cause considerable damage to primary and secondary lithium cells. Rechargeable lithium batteries are used in notebook computers and cellular phones as well as other portable electronic applications. Product Series: LR4, LTP, SRP, VLR, VTP All specifications subject to change. Consult Tyco Electronics for latest specifications. 77 Products for Mobile Equipment Raychem Circuit Protection Products Rechargeable Battery Pack Protection Rechargeable Battery Pack Protection Due to external shorts, runaway charging conditions, or abusive charging, considerable damage can be sustained in both battery cells and pack surroundings. The most common applications are nickel-cadmium (NiCd), nickelmetal-hydride (NiMH), and lithium-ion (Li-ion) battery packs for cellular phones, laptop/notebook computers, and other portable electronic applications. Product Series: LR4, LTP, SRP, VLR, VLP, VTP 78 All specifications subject to change. Consult Tyco Electronics for latest specifications. Catalog 1654270-2 Revised 8-2007 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Portable Electronics Input Port Protection Portable Electronics Input Port Protection The use of an incorrect or faulty adapter/charger can irreparably damage unprotected portable electronics equipment. Typical applications include cellular phones, PDAs, and digital cameras. Product Series: nanoSMD, microSMD, miniSMD PolySwitch device alternative position Phone supply FET or BJT PolySwitch Strap device 3x NiMH Charge From AC Adapter Control OV IC PWM Ident OC1 OC2 Battery Pack All specifications subject to change. Consult Tyco Electronics for latest specifications. 79 Products for Mobile Equipment Raychem Circuit Protection Products HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player HDMI (High Definition Multimedia Interface) applications such as LCD displays, Plasma displays, High Definition Television set-top boxes, and DVD players are susceptible to electrostatic discharge. To help protect the high speed TNDS lines against ESD hits PESD devices are used, two per line. Product Series: PESD 80 All specifications subject to change. Consult Tyco Electronics for latest specifications. Catalog 1654270-2 Revised 8-2007 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - VLR Series Strap Battery Devices - VLR Series Features Current ratings from 1.7 A to 2.3 A Voltage: 12 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B1 Figure B2 Figure B3 Dimensions (mm) A Part Number B C D E Min. Max. Min. Max. Min. Max. Min. Max. VLR170F 20.8 23.2 - 0.8 3.5 3.9 4.5 VLR170LF 38.8 41.2 - 0.8 3.5 3.9 8.7 VLR170UF 20.8 23.2 - 0.7 3.5 3.7 5.3 6.7 VLR175F 23.0 24.5 - 0.8 2.9 3.3 4.7 VLR175LF 29.3 31.7 - 0.8 2.9 3.3 5.2 VLR175UF 23.0 24.5 - 0.7 2.9 3.1 VLR230F 20.9 23.1 - 0.8 4.9 5.3 VLR230F-C36 25.3 27.7 - 0.8 3.5 VLR230SUF 20.9 23.1 - 0.7 4.9 F Min. Figure Min. Max. Max. 6.5 4.5 06.5 2.4 2.6 B1 10.30 18.70 20.3 2.4 2.6 B1 5.3 06.7 2.4 2.6 B2 7.2 3.8 05.4 2.4 2.6 B1 6.8 10.00 12.5 2.4 2.6 B1 5.2 7.5 4.3 05.7 2.4 2.6 B2 4.1 5.8 4.1 05.8 3.9 4.1 B1 3.9 3.5 5.7 3.5 05.7 2.9 3.1 B3 5.1 4.1 6.0 4.1 06.0 3.9 4.1 B2 85 C Typical Activation VLR All specifications subject to change. Consult Tyco Electronics for latest specifications. 81 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - VLP Series Strap Battery Devices - VLP Series Features Current ratings from 2.1 A to 2.7 A Voltage: 16 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B4 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. VLP220F 21.1 23.3 0.6 0.8 3.5 3.9 5.1 6.8 5.1 6.8 2.9 3.1 B4 VLP270F 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B4 90 C Typical Activation VLP 82 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - VTP Series Strap Battery Devices - VTP Series Features Current ratings from 1.1 A to 2.4 A Voltage: 16 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B5 Figure B6 Figure B7 Figure B8 Figure B9 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 23.6 25.6 - 0.7 2.7 2.9 7.0 8.0 7.0 08.0 2.3 2.5 B9 90 C Typical Activation VTP VTP110F VTP170F 15.4 17.5 0.5 0.8 7.0 7.4 4.0 6.2 4.0 06.2 3.9 4.1 B5 VTP170XF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B6 VTP170XSF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B7 VTP175F 21.2 23.2 - 0.8 3.5 3.9 4.6 6.6 4.6 06.6 2.9 3.1 B6 VTP175LF 25.8 28.2 - 0.8 3.5 3.9 5.7 7.3 8.7 10.3 2.4 2.6 B6 VTP175UF 21.2 23.2 - 0.7 3.5 3.7 5.6 6.8 5.6 06.8 2.9 3.1 B9 VTP200GF 20.9 23.1 - 0.8 4.1 4.5 3.0 4.8 3.0 04.8 2.9 3.1 B6 VTP200UF 20.9 23.1 - 0.7 4.1 4.3 4.0 5.4 4.0 05.4 2.9 3.1 B9 VTP210GF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B6 VTP210SF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B7 VTP210SLF 29.0 32.0 0.6 0.8 4.9 5.3 3.5 5.8 12.50 14.5 3.9 4.1 B7 VTP210SSF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B8 VTP240F 23.8 26.2 - 0.8 4.9 5.3 3.5 5.7 3.5 05.7 3.9 4.1 B6 All specifications subject to change. Consult Tyco Electronics for latest specifications. 83 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - LTP Series Strap Battery Devices - LTP Series Features Current ratings from 0.7 A to 3.4 A Voltage: 15 V to 25 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B10 Figure B11 Figure B12 Dimensions (mm) A Part Number Min. B Max. Min. C Max. Min. D Max. Min. E Max. Min. F Max. Min. Figure Max. 110 C Typical Activation LTP LTP070F 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B10 LTP070SF 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B11 LTP100F 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10 LTP100SF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11 LTP100SLF 29.0 32.0 0.6 1.0 4.9 5.2 3.5 5.5 12.50 14.50 3.9 4.1 B11 LTP100SSF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B12 LTP180F 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10 LTP180LF 35.5 37.5 0.6 1.0 4.9 5.2 9.7 11.00 9.7 11.00 3.9 4.1 B10 LTP180SF 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11 LTP190F 21.3 23.4 0.5 1.1 10.20 11.00 5.0 7.6 5.0 7.6 4.8 5.4 B10 LTP260F 24.0 26.0 0.6 1.0 10.80 11.90 5.0 7.0 5.0 7.0 5.9 6.1 B10 LTP300F 28.4 31.8 0.5 1.1 13.00 13.50 6.3 8.9 6.3 8.9 6.0 6.6 B10 LTP340F 24.0 26.0 0.6 1.0 14.80 15.90 4.0 5.0 4.0 5.0 5.9 6.1 B10 84 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - LR4 Series Strap Battery Devices - LR4 Series Features Current ratings from 1.7 A to 14.1 A Voltage: 15 V to 20 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B13 Figure B14 Figure B15 Figure B16 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. LR4-170UF 19.0 21.0 0.5 0.7 3.8 4.0 5.3 6.5 5.3 6.5 2.9 3.1 LR4-190F 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13 LR4-190SF 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B14 125 C Typical Activation LR4 B15 LR4-260F 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B13 LR4-260SF 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B14 LR4-380F 24.0 26.0 0.6 1.0 6.9 7.5 4.1 5.5 4.1 5.5 4.9 5.1 B13 LR4-380XF 32.2 35.8 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13 LR4-450F 24.0 26.0 0.6 1.0 9.9 10.50 5.3 6.7 5.3 6.7 5.9 6.1 B13 LR4-550F 35.0 37.0 0.6 1.0 6.9 7.5 5.3 6.7 5.3 6.7 4.9 5.1 B13 LR4-600F 24.0 26.0 0.6 1.0 13.90 14.50 4.1 5.5 4.1 5.5 5.9 6.1 B13 LR4-600XF 40.5 42.7 0.6 1.0 6.9 7.5 5.2 6.8 5.2 6.8 4.9 5.1 B13 LR4-730F 27.1 29.1 0.6 1.0 13.90 14.50 4.1 5.5 4.1 5.5 5.9 6.1 B13 LR4-880SSF 62.8 65.2 0.6 1.0 7.9 8.5 10.00 12.00 10.00 12.00 5.9 6.1 B16 LR4-900F 45.4 47.6 0.9 1.3 7.9 8.5 4.6 6.2 4.6 6.2 5.9 6.1 B13 LR4-1300SSF 61.5 66.5 0.9 1.3 9.4 10.00 5.0 7.5 5.0 7.5 5.9 6.1 B16 All specifications subject to change. Consult Tyco Electronics for latest specifications. 85 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Strap Battery Devices - SRP Series Strap Battery Devices - SRP Series Features Current ratings from 1.2 A to 4.2 A Voltage: 15 V to 30 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B17 Figure B18 Figure B19 Dimensions (mm) A Part Number Min. B Max. Min. C D E Max. Min. Max. Min. Max. Min. F Max. Min. Figure Max. SRP SRP120F 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B17 SRP120LF 24.9 27.1 0.6 1.0 04.9 05.2 5.5 7.5 10.5 12.5 3.9 4.1 B17 SRP120SF 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B18 B17 SRP175F 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 SRP175LF 29.9 32.1 0.6 1.0 04.9 05.2 5.5 7.5 10.50 12.50 3.9 4.1 B17 SRP175SF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B18 SRP175SSF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B19 SRP200F 21.3 23.4 0.5 1.1 10.2 11.0 5.0 7.6 5.0 7.6 4.8 5.4 B17 SRP350F 28.4 31.8 0.5 1.1 13.0 13.5 6.3 8.9 6.3 8.9 6.0 6.6 B17 SRP420F 30.6 32.4 0.5 1.1 12.9 13.6 5.0 7.5 5.0 7.5 6.0 6.7 B17 86 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Surface-Mount Devices - nanoSMDC Surface-Mount Devices - nanoSMDC Features Broadest range of resettable devices available in the industry Current ratings from 0.12 A to 2 A Voltage ratings from 6 V to 48 V Agency Recognition: UL, CSA, TUV Fast time-to-trip Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S1 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. nanoSMDC012F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC016F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC020F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC035F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC050F/13.2 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC075F 3.00 3.40 0.28 0.48 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC110F 3.00 3.40 0.67 1.00 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC150F 3.00 3.40 0.55 0.89 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMDC200F 3.00 3.40 0.68 1.25 1.37 1.80 0.25 0.75 0.08 - - - S1 nanoSMP Series Size 3216 mm/1206 mils All specifications subject to change. Consult Tyco Electronics for latest specifications. 87 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Surface-Mount Devices - microSMD Surface-Mount Devices - microSMD Features Broadest range of resettable devices available in the industry Current ratings from 0.05 A to 1.75 A Voltage ratings from 6 V to 30 V Agency Recognition: UL, CSA, TUV Small footprint Fast time-to-trip Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S2 Figure S3 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. microSMD005F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 - - - S3 microSMD010F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD035F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD050F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD075F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD110F 3.00 3.43 0.28 0.48 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD150F 3.00 3.43 0.51 1.22 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD175F 3.00 3.43 0.40 0.76 2.35 2.80 0.25 0.75 0.20 - - - S2 microSMD Series Size 3225 mm/1210 mils 88 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Surface-Mount Devices - miniSMDC Surface-Mount Devices - miniSMDC Features Broadest range of resettable devices available in the industry Current ratings from 0.14 A to 2.6 A Voltage ratings from 6 V to 60 V Agency Recognition: UL, CSA, TUV Small footprint Fast time-to-trip Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S4 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. miniSMDC014F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC020F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC050F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC075F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC075F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC110F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC110F/16 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC110F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC125F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC125F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC Series Size 4532 mm/1812 mils miniSMDC150F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC150F/12 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC150F/24 4.37 4.83 1.00 1.68 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC160F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC200F 4.37 4.73 0.51 1.22 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC260F 4.37 4.73 0.48 0.74 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC260F/12 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 - - - S4 miniSMDC260F/16 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 - - - S4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 89 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Surface-Mount Devices - miniSMDE Surface-Mount Devices - miniSMDE Features Broadest range of resettable devices available in the industry Current Rating: 1.9 A Voltage Rating: 16 V Agency Recognition: UL, CSA, TUV Small footprint Fast time-to-trip Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S5 Dimensions (mm) A Part Number B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 0.38 - - - miniSMDE Series Size 11550 mm/4420 mils miniSMDE190F 90 All specifications subject to change. Consult Tyco Electronics for latest specifications. S5 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Fast Acting Fuses Fast Acting Fuses Features Fast-acting fuses help provide overcurrent protection on systems using DC power sources up to 63 V DC. The fuse's monolithic, multilayer design provides the highest hold current in the smallest footprint, reduces diffusion-related aging, improves product reliability and resilience, and enhances high temperature performance in a wide range of circuit protection designs. This helps facilitate the development of more reliable, high-performance consumer electronics such as laptops, multimedia devices, cell phones, and other portable electronics. Material Specifications Construction Body Material: Termination Material: Fuse Element: Terminal Strength: Ceramic Silver, Nickel, Tin Silver Hanging Test 0603: 0.5 kg, 30 seconds; 1206: 1.5 kg, 30 seconds; 0402: Part types meet 2-pound push test Characteristics Rated Current (A) Nominal Cold DCR () 0402SFF050F/24 0.50 0.380 Dimensions and Pad Layout 0402SFF075F/24 0.75 0.210 0402 (1005 mm) Fast Acting Surface-Mount Chip Fuses 0402SFF100F/24 1.00 0.120 Shape and Dimensions Inch (mm) 0402SFF150F/24 1.50 0.056 0402SFF200F/24 2.00 0.035 0402SFF300F/24 3.00 0.021 0402SFF400F/24 4.00 0.014 0603SFF050F/32 0.50 0.485 0603SFF075F/32 0.75 0.254 0603SFF100F/32 1.00 0.131 0603SFF150F/32 1.50 0.059 0603SFF200F/32 2.00 0.044 0603SFF250F/32 2.50 0.032 0603SFF300F/32 3.00 0.025 0603SFF350F/32 3.50 0.024 0603SFF400F/32 4.00 0.018 0603SFF500F/32 5.00 0.013 0603SFF600F/24 6.00 0.010 1206SFF050F/63 0.50 0.500 1206SFF075F/63 0.75 0.330 1206SFF100F/63 1.00 0.220 1206SFF150F/63 1.50 0.120 1206 (3216 mm) Fast Acting Surface-Mount Chip Fuses 1206SFF175F/63 1.75 0.100 Shape and Dimensions Inch (mm) 1206SFF200F/63 2.00 0.050 1206SFF250F/32 2.50 0.035 1206SFF300F/32 3.00 0.031 1206SFF400F/32 4.00 0.022 1206SFF500F/32 5.00 0.015 1206SFF600F/24 6.00 0.013 1206SFF700F/24 7.00 0.011 1206SFF800F/24 8.00 0.008 Recommended Pad Layout Inch (mm) 0603 (1608 mm) Fast Acting Surface-Mount Chip Fuses Shape and Dimensions Inch (mm) Maximum Ratings Typical Electrical Part Number Recommended Pad Layout Inch (mm) Recommended Pad Layout Inch (mm) ) ) Interrupt Voltage (VDC ) Current (A) 24 35 50 32 35 24 63 50 32 45 24 Measured at 25 C Measured at 10% of rated current All specifications subject to change. Consult Tyco Electronics for latest specifications. 91 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 Slow Blow Fuses Slow Blow Fuses Features Industry standard 1206 chip sizes, high reliability and strong arc suppression characteristics. The fuse's monolithic, multilayer design helps provide some of the highest current ratings available in the 1206 footprint and enhances high temperature performance in a wide range of circuit protection designs. Designed for DC power applications of up to 63 V DC such as protection of power supplies, capacitor filter banks, LCD backlight inverters, electric motors and portable electronics. Material Specifications Construction Body Material: Ceramic Termination Material: Silver, Nickel, Tin Fuse Element: Silver Terminal Strength: Hanging Test: 1.5 kg, 30 seconds Dimensions and Pad Layout Part Number 1206 (3216mm) Slow Blow Surface-Mount Chip Fuses Rated Current (A) Shape and Dimensions Inch (mm) Recommended Pad Layout Inch (mm) ) Nominal DCR () Cold Nominal l 2t (A2sec)2 1206SFS100F/63 1.0 0.260 0.11 1206SFS125F/63 01.25 0.150 0.22 1206SFS150F/63 1.5 0.130 0.23 1206SFS200F/63 2.0 0.090 0.63 1206SFS250F/32 2.5 0.050 0.90 1206SFS300F/32 3.0 0.032 1.20 1206SFS350F/32 3.5 0.028 1.60 1206SFS400F/32 4.0 0.022 2.20 1206SFS450F/32 4.5 0.019 3.60 1206SFS500F/32 5.0 0.018 5.30 1206SFS550F/24 5.5 0.014 6.40 1206SFS600F/24 6.0 0.012 8.50 1206SFS700F/24 7.0 0.009 10.000 1206SFS800F/24 8.0 0.008 16.900 ) 92 Typical Electrical Characteristics Measured at 10 % of rated current and 25 C Melting l2 t at 0.001 sec clear time All specifications subject to change. Consult Tyco Electronics for latest specifications. Voltage (VDC ) 63 32 24 Products for Mobile Equipment Raychem Circuit Protection Products Catalog 1654270-2 Revised 8-2007 ESD Protection Devices ESD Protection Devices Features Designed for I/O port protection in high-speed data transmission applications, PESD protection devices shunt ESD away from sensitive circuitry in electronic devices. The Raychem PESD protection devices provide exceptionally low capacitance, and they perform better than other comparable components in transmission line pulse (TLP) testing, as well as IEC61000-4-2 testing, especially after multiple hits (up to 1000). The devices offer a lower trigger voltage and a lower clamping voltage than typical polymer ESD devices, resulting in improved protection of sensitive electronic components. Dimensions Dimensions (mm) Part Number ) Length A Height B Terminal Width C Width D Min. Max. Min. Max. Min. Max. Min. Max. 0402 0.95 1.05 0.33 0.43 0.10 0.30 0.45 0.55 0603 1.40 1.80 0.38 0.58 0.10 0.50 0.60 1.00 Rounded off approximation Dimensions (mm) Part Number Length A 1206Q ) Pad Layout Height B Terminal Width C Width D Width E Width F Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 3.0 3.4 0.4 0.6 0.1 0.3 1.4 1.8 0.2 0.6 0.2 0.6 Rounded off approximation Dimensions (mm) Part Number V Ref. W Ref. X Ref. Y Ref. PESD0402Q - 0.65 0.05 0.35 0.05 0.85 0.05 Figure - E3 PESD0603Q - 0.95 0.05 0.55 0.05 1.05 0.05 - E3 PESD1206Q 3.2 0.2 22.0 0.20 0.50 0.10 0.80 0.20 1.0 0.1 E4 Note: Solder Thickness 0.15 to 0.20 mm ) Rounded off approximation Figure E3 Figure E4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 93 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 94 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Switches Catalog 1654270-2 Revised 8-2007 FSM 6 x 6 Series FSM 6 x 6 Series Different Actuator and Mounting Versions Technical Features Style: 6 x 6 mm Mounting Style: THT, SMT Right-Angle Versions: Available Low Profile Versions: Available Flush Actuator Version: Available Product Key Actuator Force (N) Height (mm) Different Actuator Styles: Available FSM2JSMATR 1.6 4.3 3-1437565-0 FSM4JSMATR 1.6 5.0 4-1437565-2 ESD Ground Terminal/ Locating Post: Optional/No FSM6JSMATR 1.6 7.0 5-1437565-0 FSM2JSMAATR 2.6 4.3 FSM4JSMXLTR 0.7 5.0 Sealed Versions: Available FSM4JSMAATR 2.6 5.0 FSM6JSMAATR 2.6 7.0 1-1571563-2 Standard Actuation Force: 1.6 and 2.6 N FSM2JSMLTR 1.0 4.3 0-1571527-2 FSM2JSMA 1.6 4.3 Electrical Endurance: up to 2,000,000 cycles FSM4JSMA 1.6 5.0 4-1437565-1 FSM6JSMA 1.6 7.0 4-1437565-9 Operating Temperature Range: -20 C up to +85 C FSM2JSMAA 2.6 4.3 FSM4JSMXL 0.7 5.0 Dimensions (L x W x H) Horizontal Version: 6.0 x 6.0 x 4.3 ... 17.0 mm FSM4JSMAA 2.6 5.0 FSM6JSMAA 2.6 7.0 1-1571563-1 FSM2JSML 1.0 4.3 0-1571527-1 1.6 2.5 SMT/J 1.6 2.5 SMT/G Sealed Version: 7.6 x 7.6 x 3.3 ... 5.0 mm Packaging: Tape and Reel, Bulk Mounting Packaging Tape and Reel Part Number 2-1437565-9 0-1571563-2 0-1571563-4 SMT 2-1437565-7 Bulk 2-1437565-8 0-1571563-1 0-1571563-3 FSM, Extended Life, J-Lead FSM, J Bulk 0-1571625-5 Tape and Reel 0-1571625-6 FSM, Extended Life, Gull Wing FSM, G Bulk 0-1571626-5 Tape and Reel 0-1571626-6 FSM, Extended Life, Gull Wing, Ground Terminal FSM, G, Grd.T. 1.6 2.5 SMT/G 3.1 SMT Bulk 0-1571636-5 Tape and Reel 0-1571636-6 FSM1LP, Low Profile FSM1LP 1.6 FSM1LPA 2.6 FSM1LPTR 1.6 FSM1LPATR 2.6 3.1 SMT 4.3 SMT 5.0 SMT 1.6 3.3 SMT 2.6 - SMT Bulk Tape and Reel 1-1437565-6 1-1437565-7 1-1437565-9 1-1437565-8 FSM Sealed Extended Actuator FSM Sealed 1.6 Bulk 0-1571294-1 Tape and Reel 0-1571294-2 Bulk 0-1571294-3 Tape and Reel 0-1571294-4 FSM Sealed Flush Actuator FSM Sealed, Fl. Bulk 0-1571296-1 Tape and Reel 0-1571296-2 FSM Sealed Right-Angle FSM Sealed RA All specifications subject to change. Consult Tyco Electronics for latest specifications. Bulk 0-1571407-1 Tape and Reel 0-1571407-2 95 Products for Mobile Equipment Switches Catalog 1654270-2 Revised 8-2007 FSMCT Series FSMCT Series Low Profile Technical Features Style: 5 x 5 mm Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: No Different Actuator Styles: No ESD Ground Terminal/ Locating Post: No/No Product Key Actuator Force (N) FSMCTTR 1.6 FSMCTATR 2.6 Height (mm) Mounting Packaging 1.5 SMT Tape and Reel Sealed Versions: No Standard Actuation Force: 1.6 and 2.6 N Electrical Endurance: up to 1,000,000 cycles Operating Temperature Range: -20 C up to +85 C Dimensions (L x W x H) Horizontal Version: 5.2 x 5.2 x 1.5 mm Packaging: Tape and Reel 96 All specifications subject to change. Consult Tyco Electronics for latest specifications. Part Number 8-1437565-0 8-1437565-1 Products for Mobile Equipment Switches Catalog 1654270-2 Revised 8-2007 FSM 3.5 x 6 Series FSM 3.5 x 6 Series Small PCB Footprint Technical Features Style: 3.5 x 6 mm Mounting Style: THT, SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: Available Different Actuator Styles: Available ESD Ground Terminal/ Locating Post: No/No Sealed Versions: Available Standard Actuation Force: 1.3 and 1.8 N Electrical Endurance: up to 40,000 cycles Operating Temperature Range: -40 C up to +85 C Product Key Actuator Force (N) FSMSM Height (mm) Mounting 4.3 SMT Packaging Bulk FSMSMTR FSMJM3,5ATR Part Number 1437566-3 1437566-4 1.8 3.5 FSMJM4,3ATR 4.3 FSMJM5ATR 5.0 Tape and Reel 0147873-3 0147873-2 SMT/J 0147873-1 FSM Sealed FSM Sealed FSM Sealed FSM Sealed 1.3 5.0 SMT 4.3 SMT/J 5.0 SMT/J 1571298-2 Tape and Reel 1571299-2 1571299-4 Dimensions (L x W x H) Horizontal Version: 3.5 x 6.0 x 4.3 ... 5.0 mm Sealed Version: 4.7 x 6.8 x 4.3 ... 5.0 mm Packaging: Tape and Reel, Bulk All specifications subject to change. Consult Tyco Electronics for latest specifications. 97 Products for Mobile Equipment Switches Catalog 1654270-2 Revised 8-2007 FSM 0.5 mm FSM 0.5 mm Ultra Low Profile Technical Features Style: 5 x 5 mm Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: Standard Flush Actuator Version: Standard Different Actuator Styles: No Product Key FSM 4.8x4.8x0.5 Actuator Force (N) Height (mm) Mounting Packaging Part Number 1.6 0.5 SMT Tape and Reel 1825534-1 ESD Ground Terminal/ Locating Post: No/No Sealed Versions: No Standard Actuation Force: 1.6 N Electrical Endurance: up to 500,000 cycles Operating Temperature Range: -20 C up to +70 C Dimensions (L x W x H) Horizontal Version: 4.8 x 4.8 x 0.5 mm Packaging: Tape and Reel 98 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Switches Catalog 1654270-2 Revised 8-2007 Turtle Style Turtle Style Side Actuated Tactile Technical Features Style: Turtle Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: No Different Actuator Styles: No ESD Ground Terminal/ Locating Post: No/Optional Product Key FSM Turtle Actuator Force (N) Height (mm) Mounting 1.6 1.8 SMT FSM Turtle Packaging Part Number Bulk 1571262-1 Tape and Reel 1571262-2 Sealed Versions: No Standard Actuation Force: 1.6 N Electrical Endurance: up to 100,000 cycles Operating Temperature Range: -20 C up to +85 C Dimensions (L x W x H) Horizontal Version: 4.5 x 7.5 x 1.8 mm Packaging: Tape and Reel, Bulk All specifications subject to change. Consult Tyco Electronics for latest specifications. 99 Products for Mobile Equipment Switches CoinKeyTM CoinKeyTM Improve the Human Interface Technical Features CoinKey is a one finger operated key with excellent input and navigational capabilities. With its two-ways rotation and 5 press points; left, right, top, bottom and center, CoinKey is the ultimate key for multi-application handheld devices. Its unique functionality makes it possible to develop more efficient and user-friendly menu systems than with any other navigation key in the market. We would be happy to offer opportunity assessment in that regard. Documentation Drawing: 1705448-1 Product Specification: 108-19288 CoinKey is a registered trademark of 100 All specifications subject to change. Consult Tyco Electronics for latest specifications. Catalog 1654270-2 Revised 8-2007 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 101 Products for Mobile Equipment Labels Catalog 1654270-2 Revised 8-2007 MP Metalized Polyester Labels MP Metalized Polyester Labels Tyco Electronics MP is a thermal transfer printable metalized polyester film with a permanent acrylic adhesive, designed for rating plates and other applications that require a metal look, such as nameplates, equipment labels, detailed product information labels and serial number plates. MP is UL Listed and CSA Certified. Print performance and durability are reliable when used with Tyco Electronics's RHD series ribbon. Features and Benefits Thermal transfer printable Metalized appearance Ideal for rating plate applications Several die-cut sizes available UL Listed and CSA Certified Specifications: TTDS-074 Adhesive: Permanent Acrylic Service Temperature: -40 C to +150 C Part Numbering System MP-080080-10-8A Recommended Printer: T308S Recommended Ribbon: 1330-0607-10 ) Alternative printers and ribbons are available for special applications. Contact Tyco Electronics for more information. Color Pack Size Label Height (mm) Label Width (mm) Product Family Ordering Information 102 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Labels MP Metalized Polyester Labels Catalog 1654270-2 Revised 8-2007 (continued) Dimensions (mm) Product Order Code Package Quantity Labels Across MP-040040-25-8A 25,000 MP-064064-25-8A 25,000 MP-080080-10-8A Label Width A Label Height B Horizontal Repeat C Vertical Repeat D Web Width E 20 04.0 04.0 04.0 07.2 86.0 12 06.4 06.4 06.4 09.5 82.2 10,000 08 08.0 08.0 09.9 13.3 83.3 MP-089047-10-8A 10,000 05 08.9 04.7 11.4 07.9 60.6 MP-095080-25-8A 25,000 05 09.5 08.0 12.2 12.7 64.3 MP-095095-10-8A 10,000 07 09.5 09.5 11.1 12.7 82.1 MP-127111-10-8A 10,000 05 12.7 11.1 16.8 14.3 86.0 MP-127127-10-8A 10,000 05 12.7 12.7 15.9 15.9 82.6 MP-165051-25-8A 25,000 04 16.5 05.1 17.8 08.3 75.8 MP-165102-10-8A 10,000 05 16.5 10.2 19.1 13.8 99.1 MP-171171-10-8A 10,000 05 17.1 17.1 19.7 20.3 101.80 MP-178095-10-8A 10,000 04 17.8 09.5 19.1 12.7 80.9 MP-191064-10-8A 10,000 04 19.1 06.4 21.6 09.5 89.9 MP-191114-15-8A 15,000 03 19.1 11.4 22.2 14.7 69.5 MP-203127-10-8A 10,000 04 20.3 12.7 22.9 15.9 94.6 MP-229064-10-8A 10,000 03 22.9 06.4 28.6 09.5 86.0 MP-254045-10-8A 10,000 03 25.4 04.6 31.8 08.5 95.3 MP-254064-10-8A 10,000 03 25.4 06.4 27.9 09.5 87.3 MP-254097-10-8A 10,000 03 25.4 09.7 27.9 12.7 87.4 MP-254127-10-8A 10,000 03 25.4 12.7 27.9 16.9 87.4 MP-254254-10-8A 10,000 03 25.4 25.4 27.9 28.6 87.4 MP-305047-10-8A 10,000 02 30.5 04.7 33.0 07.8 69.5 MP-318064-10-8A 10,000 01 31.8 06.4 N/A 09.5 37.9 MP-318097-10-8A 10,000 01 31.8 09.7 N/A 12.7 37.8 MP-381064-10-8A 10,000 01 38.1 06.4 N/A 09.5 44.5 MP-381127-5-8A 05,000 02 38.1 12.7 44.2 15.9 88.2 MP-381191-5-8A 05,000 02 38.1 19.1 43.2 22.2 87.6 MP-381381-2.5-8A 02,500 02 38.1 38.1 44.5 40.8 88.9 MP-381635-5-8A 05,000 02 38.1 63.5 40.6 66.7 84.7 MP-406254-1.5-8A 01,500 02 40.6 25.4 55.9 38.1 102.90 MP-445064-10-8A 10,000 01 44.5 06.4 N/A 09.5 50.4 MP-445102-5-8A 05,000 01 44.5 10.2 N/A 12.7 50.4 MP-445445-2-8A 02,000 01 44.5 44.5 N/A 47.6 50.4 MP-478175-5-8A 05,000 01 47.8 17.5 N/A 24.4 66.0 MP-508064-10-8A 10,000 01 50.8 06.4 N/A 09.5 56.9 MP-508095-5-8A 05,000 01 50.8 09.5 N/A 12.7 57.2 MP-508127-5-8A 05,000 01 50.8 12.7 N/A 15.9 56.9 MP-508254-5-8A 05,000 01 50.8 25.4 N/A 28.6 57.2 MP-508318-2.5-8A 02,500 01 50.8 31.8 N/A 34.9 56.9 MP-508508-3-8A 03,000 01 50.8 50.8 N/A 54.6 54.0 MP-523841-1.5-8A 01,500 01 52.3 84.1 N/A 88.9 58.2 MP-610419-2.5-8A 02,500 01 61.0 41.9 N/A 45.5 67.3 MP-699191-5-8A 05,000 01 69.9 19.1 N/A 23.3 76.2 MP-699254-5-8A 05,000 01 69.9 25.4 N/A 28.6 76.2 MP-762381-2.5-8A 02,500 01 76.2 38.1 N/A 41.3 82.3 MP-762508-2.5-8A 02,500 01 76.2 50.8 N/A 54.0 82.6 MP-762127-1-8A 01,000 01 76.2 127.00 N/A 129.50 79.4 MP-101508-2.5-8A 02,500 01 101.60 50.8 N/A 54.6 104.10 MP-101635-2.5-8A 02,500 01 101.60 63.5 N/A 66.7 107.70 MP-101762-1.8-8A 01,800 01 101.60 76.2 N/A 79.4 104.10 MP-101101-1.3-8A 01,300 01 101.60 101.60 N/A 104.80 104.10 MP-101165-0.85-8A 00,850 01 101.60 165.10 N/A 168.30 104.90 ) Note: Standard Format Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 103 Products for Mobile Equipment Labels Catalog 1654270-2 Revised 8-2007 Kapton(R) Labels Kapton(R) Labels Tyco Electronics polyimide (Kapton(R)) labels are all ideal for high temperature labeling requirements such as printed circuit boards. They are suitable for direct wave (bottom side) and IR reflow (top side) PCB applications. Tyco Electronics Kapton(R) labels are designed to withstand the fluxes, cleaning solvents and molten solder encountered in the manufacture of printed circuit boards. They offer excellent contrast for bar code applications. Tyco Electronics Kapton(R) labels are suitable for the harshest high temperature applications. For reliable print performance and durability, use with Tyco Electronics's RHT-45 series ribbon. Features and Benefits UL Listed: T1K, T2K & TSK Thermal transfer printable High temperature permanent acrylic adhesive T1K Gloss white topcoat Withstands surface mount board processes on either the top or bottom side of the board. Low profile 1 mil film offers polyimide thermal performance at competitive cost. Ideal for manual apply applications. T2K Gloss white topcoat Withstands surface mount board processes on either the top or bottom side of the board. Specifications: T1K T2K TSK Adhesive: Permanent Acrylic Service Temperature: T1K1, T2K 2, TSK 2, KTT 2 T2Y 3 -40 C to +260 C -40 C to +232 C 1 Flash exposure to +472 C 2 Flash exposure to +538 C 3 Flash exposure to +316 C Ideal for auto apply applications. KTT Matte tan topcoat Withstands surface mount board processes on either the top or bottom side of the board. TTDS-034 TTDS-035 TTDS-085 Recommended Printer: T1K, T2K, TSK, T2Y, T2Y, KTT T312S Recommended Ribbon: 1330-0619-10 Product approved for aerospace/defense applications. Low outgassing ) Alternative printers and ribbons are available for special applications. Contact Tyco Electronics for more information. TSK High opacity gloss white topcoat. Withstands surface mount board processes on either the top or bottom side of the board. Part Numbering System Deemed to be a static safe product in accordance with EIA 625, EIA 541. Test methods employed were in accordance with EOS/ESD S11.11. T1K-044033-10-9 Ideal for auto apply applications. Color T2Y Pack Size High opacity gloss white topcoat. Economic alternative to T1K material. Withstands surface mount board processes on either the top or bottom side of the board - can also be used on the top side of the board in mixed processes, but it is not recommended for the bottom side which is directly exposed to the wave solder environment. 104 All specifications subject to change. Consult Tyco Electronics for latest specifications. Label Height (mm) Label Width (mm) Product Family Products for Mobile Equipment Labels Kapton(R) Labels Catalog 1654270-2 Revised 8-2007 (continued) Ordering Information Dimensions (mm) Product Order Code Package Quantity Labels Across T1K-044033-10-9 10,000 T1K-064064-25-9 25,000 T1K-080080-10-9 Label Width A Label Height B Horizontal Repeat C Vertical Repeat D Web Width E 20 04.4 3.3 04.4 09.5 92.4 12 06.4 6.4 06.4 09.5 82.2 10,000 08 08.0 8.0 09.9 13.3 83.3 T1K-095080-25-9 25,000 05 09.5 8.0 12.2 12.7 64.3 T1K-095095-10-9 10,000 07 09.5 9.5 11.1 12.7 82.1 T1K-127032-10-9 10,000 05 12.7 3.2 19.1 03.2 94.9 T1K-127111-10-9 10,000 05 12.7 11.10 16.8 14.3 86.0 T1K-127127-10-9 10,000 05 12.7 12.70 15.9 15.9 82.6 T1K-165051-25-9 25,000 04 16.5 5.1 17.8 08.3 75.8 T1K-171171-10-9 10,000 05 17.1 17.10 19.7 20.3 101.80 T1K-178095-10-9 10,000 04 17.8 9.5 19.1 12.7 80.9 T1K-191064-10-9 10,000 04 19.1 6.4 21.6 09.5 89.9 T1K-229064-10-9 10,000 03 22.9 6.4 28.6 09.5 86.0 T1K-254045-10-9 10,000 03 25.4 4.6 31.8 08.5 95.3 T1K-254064-10-9 10,000 03 25.4 6.4 27.9 09.5 87.3 T1K-254097-10-9 10,000 03 25.4 9.7 27.9 12.7 87.4 T1K-254127-10-9 10,000 03 25.4 12.70 27.9 16.9 87.4 T1K-254254-10-9 10,000 03 25.4 25.40 27.9 28.6 87.4 T1K-305047-10-9 10,000 02 30.5 4.7 33.0 07.8 69.5 T1K-318064-10-9 10,000 01 31.8 6.4 N/A 09.5 37.9 T1K-381020-10-9 10,000 01 38.1 2.0 N/A 10.7 44.1 T1K-381127-5-9 05,000 02 38.1 12.70 44.2 15.9 88.2 T1K-381381-2.5-9 02,500 02 38.1 38.10 44.5 40.8 88.9 T1K-445064-10-9 10,000 01 44.5 6.4 N/A 09.5 50.4 T1K-445102-5-9 05,000 01 44.5 10.20 N/A 12.7 50.4 T1K-508064-10-9 10,000 01 50.8 6.4 N/A 09.5 56.9 T1K-508095-5-9 05,000 01 50.8 9.5 N/A 12.7 57.2 T1K-508127-5-9 05,000 01 50.8 12.70 N/A 15.9 56.9 ) Note: Kapton(R)/Polyimide Labels Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 105 Products for Mobile Equipment Labels Catalog 1654270-2 Revised 8-2007 WP White Polyester Labels WP White Polyester Labels Tyco Electronics WP is a thermal transfer printable white polyester film with a permanent acrylic adhesive. It is ideal for bar coding, PCB and component labeling, as well as general purpose labeling applications that require a high durability white label. WP is resistant to a variety of solvents while maintaining print quality. It is UL Listed and CSA Certified, and print performance and durability are reliable when used with Tyco Electronics's RHD series ribbon. Features and Benefits Thermal transfer printable Excellent for use in PCB component labeling Ink receptive topcoat Excellent for bar code applications UL Listed and CSA Certified Specifications: TTDS-073 Adhesive: Permanent Acrylic Service Temperature: -40 C to +150 C Part Numbering System WP-040040-10-9 Recommended Printer: T308S Recommended Ribbon: 1330-0607-10 ) Alternative printers and ribbons are available for special applications. Contact Tyco Electronics for more information. Color Pack Size Label Height (mm) Label Width (mm) Product Family Ordering Information 106 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Labels WP White Polyester Labels Catalog 1654270-2 Revised 8-2007 (continued) Dimensions (mm) Product Order Code Package Quantity Labels Across WP-040040-25-9 25,000 WP-064064-25-9 25,000 WP-080080-10-9 Label Width A Label Height B Horizontal Repeat C Vertical Repeat D Web Width E 20 04.0 04.0 04.0 07.2 86.0 12 06.4 06.4 06.4 09.5 82.2 10,000 08 08.0 08.0 09.9 13.3 83.3 WP-089047-10-9 10,000 05 08.9 04.7 11.4 07.9 60.6 WP-095080-25-9 25,000 05 09.5 08.0 12.2 12.7 64.3 WP-095095-10-9 10,000 07 09.5 09.5 11.1 12.7 82.1 WP-127111-10-9 10,000 05 12.7 11.1 16.8 14.3 86.0 WP-127127-10-9 10,000 05 12.7 12.7 15.9 15.9 82.6 WP-165051-25-9 25,000 04 16.5 05.1 17.8 08.3 75.8 WP-165102-10-9 10,000 05 16.5 10.2 19.1 13.8 99.1 WP-171171-10-9 10,000 05 17.1 17.1 19.7 20.3 101.80 WP-178095-10-9 10,000 04 17.8 09.5 19.1 12.7 80.9 WP-191064-10-9 10,000 04 19.1 06.4 21.6 09.5 89.9 WP-191114-15-9 15,000 03 19.1 11.4 22.2 14.7 69.5 WP-203127-10-9 10,000 04 20.3 12.7 22.9 15.9 94.6 WP-229064-10-9 10,000 03 22.9 06.4 28.6 09.5 86.0 WP-254045-10-9 10,000 03 25.4 04.6 31.8 08.5 95.3 WP-254064-10-9 10,000 03 25.4 06.4 27.9 09.5 87.3 WP-254097-10-9 10,000 03 25.4 09.7 27.9 12.7 87.4 WP-254127-10-9 10,000 03 25.4 12.7 27.9 16.9 87.4 WP-254254-10-9 10,000 03 25.4 25.4 27.9 28.6 87.4 WP-305047-10-9 10,000 02 30.5 04.7 33.0 07.8 69.5 WP-318064-10-9 10,000 01 31.8 06.4 N/A 09.5 37.9 WP-318097-10-9 10,000 01 31.8 09.7 N/A 12.7 37.8 WP-381064-10-9 10,000 01 38.1 06.4 N/A 09.5 44.5 WP-381127-5-9 05,000 02 38.1 12.7 44.2 15.9 88.2 WP-381191-5-9 05,000 02 38.1 19.1 43.2 22.2 87.6 WP-381381-2.5-9 02,500 02 38.1 38.1 44.5 40.8 88.9 WP-381635-5-9 05,000 02 38.1 63.5 40.6 66.7 84.7 WP-406254-1.5-9 01,500 02 40.6 25.4 55.9 38.1 102.90 WP-445064-10-9 10,000 01 44.5 06.4 N/A 09.5 50.4 WP-445102-5-9 05,000 01 44.5 10.2 N/A 12.7 50.4 WP-445445-2-9 02,000 01 44.5 44.5 N/A 47.6 50.4 WP-478175-5-9 05,000 01 47.8 17.5 N/A 24.4 66.0 WP-508064-10-9 10,000 01 50.8 06.4 N/A 09.5 56.9 WP-508095-5-9 05,000 01 50.8 09.5 N/A 12.7 57.2 WP-508127-5-9 05,000 01 50.8 12.7 N/A 15.9 56.9 WP-508254-5-9 05,000 01 50.8 25.4 N/A 28.6 57.2 WP-508318-2.5-9 02,500 01 50.8 31.8 N/A 34.9 56.9 WP-508508-3-9 03,000 01 50.8 50.8 N/A 54.6 54.0 WP-523841-1.5-9 01,500 01 52.3 84.1 N/A 88.9 58.2 WP-610419-2.5-9 02,500 01 61.0 41.9 N/A 45.5 67.3 WP-699191-5-9 05,000 01 69.9 19.1 N/A 23.3 76.2 WP-699254-5-9 05,000 01 69.9 25.4 N/A 28.6 76.2 WP-762254-5-9 05,000 01 76.2 25.4 N/A 28.6 82.3 WP-762381-2.5-9 02,500 01 76.2 38.1 N/A 41.3 82.3 WP-762508-2.5-9 02,500 01 76.2 50.8 N/A 54.0 82.6 WP-762127-1-9 01,000 01 76.2 127.00 N/A 129.50 79.4 WP-101508-2.5-9 02,500 01 101.60 50.8 N/A 54.6 104.10 WP-101635-2.5-9 02,500 01 101.60 63.5 N/A 66.7 107.70 WP-101762-1.8-9 01,800 01 101.60 76.2 N/A 79.40 104.10 WP-101101-1.3-9 01,300 01 101.60 101.60 N/A 104.80 104.10 WP-101165-0.85-9 00,850 01 101.60 165.10 N/A 168.30 104.90 ) Note: Standard Format Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 107 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 108 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number 147873-1 147873-2 147873-3 2-292292-4 2-292292-5 2-292292-6 2-292292-7 2-292292-8 2-292292-9 3-292292-0 3-292292-1 292331-1 292331-2 292331-3 292331-5 2-292373-6 2-292373-7 2-292373-8 2-292373-9 3-292373-0 3-292373-1 3-292373-2 292448-1 1-338063-9 2-338063-0 2-338063-1 2-338063-2 2-338063-3 2-338063-4 2-338063-5 2-338063-6 2-338063-7 2-338063-8 2-338063-9 3-338063-0 3-338063-1 3-338063-2 3-338063-3 3-338063-4 3-338063-5 3-338063-6 3-338063-7 3-338063-8 3-338063-9 4-338063-0 1-338123-9 2-338123-0 2-338123-1 Page 97 97 97 10 10 10 10 10 10 10 10 41 41 41 41 10 10 10 10 10 10 10 41 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 Part Number 2-338123-2 2-338123-3 2-338123-4 2-338123-5 2-338123-6 2-338123-7 2-338123-8 2-338123-9 3-338123-0 3-338123-1 3-338123-2 3-338123-3 3-338123-4 3-338123-5 3-338123-6 3-338123-7 3-338123-8 3-338123-9 4-338123-0 338610-1 338966-9 1-338967-2 338970-1 368555-1 368560-1 368565-1 368637-3 440217-1 440217-2 440297-1 440297-2 440297-3 440297-4 440343-1 440423-1 440430-1 440432-1 5-619028-2 619052-1 619061-1 619062-1 619068-1 619072-1 5-619078-2 619196-1 619201-1 619210-1 5-619211-1 Page Part Number Page Part Number Page 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 25 21 21 31 23 23 23 27 16 16 25 25 25 25 16 30 30 30 35 34 33 33 34 33 35 37 36 37 37 619213-1 619214-1 619217-1 619229-1 619231-1 619238-2 900688-1 900712-1 900795-1 900905-1 900965-1 900971-1 900988-1 1279154-1 1377032-2 1377032-3 1-1377227-9 2-1377227-0 2-1377227-1 2-1377227-2 2-1377227-3 2-1377227-4 2-1377227-5 2-1377227-6 2-1377227-7 2-1377227-8 2-1377227-9 3-1377227-0 3-1377227-1 3-1377227-2 3-1377227-3 3-1377227-4 3-1377227-5 3-1377227-6 3-1377227-7 3-1377227-8 3-1377227-9 4-1377227-0 1377269-2 1437259-6 1-1437565-6 1-1437565-7 1-1437565-8 1-1437565-9 2-1437565-7 2-1437565-8 2-1437565-9 3-1437565-0 38 38 38 54 36 54 39 39 39 39 39 39 39 39 16, 17 16, 17 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 39 30 95 95 95 95 95 95 95 95 4-1437565-1 4-1437565-2 4-1437565-9 5-1437565-0 8-1437565-0 8-1437565-1 1437566-3 1437566-4 9-1442000-8 6-1442001-0 6-1442001-3 8-1442001-6 1-1442002-5 6-1442002-7 7-1442002-1 7-1442002-2 7-1442002-3 9-1442002-7 2-1442003-2 3-1442003-2 5-1442003-9 1442004-1 1447009-5 1447009-6 1447009-8 1447360-9 1-1447360-1 1470033-1 1470139-1 1470139-2 1470139-3 1470164-1 1470177-1 1470177-2 1470332-1 1470636-1 1470778-1 1470864-1 1470964-1 1-1483288-9 2-1483288-0 2-1483288-1 2-1483288-2 2-1483288-3 2-1483288-4 2-1483288-5 2-1483288-6 2-1483288-7 95 95 95 95 96 96 97 97 51 51 51 51 51 55 55 55 55 51 51 50 51 54 30 30 30 30 30 16 25 25 25 16 17 17 25 16 16 25 16 7 7 7 7 7 7 7 7 7 All specifications subject to change. Consult Tyco Electronics for latest specifications. 109 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 2-1483288-8 2-1483288-9 3-1483288-0 3-1483288-1 3-1483288-2 3-1483288-3 3-1483288-4 3-1483288-5 3-1483288-6 3-1483288-7 3-1483288-8 3-1483288-9 4-1483288-0 1-1483437-9 2-1483437-0 2-1483437-1 2-1483437-2 2-1483437-3 2-1483437-4 2-1483437-5 2-1483437-6 2-1483437-7 2-1483437-8 2-1483437-9 3-1483437-0 3-1483437-1 3-1483437-2 3-1483437-3 3-1483437-4 3-1483437-5 3-1483437-6 3-1483437-7 3-1483437-8 3-1483437-9 4-1483437-0 1483596-1 1483596-2 1483748-1 1483940-1 1483960-1 1496476-1 1496476-2 1496476-3 1496476-4 1496476-5 1496476-6 1496476-8 1565158-1 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 17 17 30 39 39 18 18 18 18 18 18 18 30 1565322-1 1571262-1 1571262-2 1571294-1 1571294-2 1571294-3 1571294-4 1571296-1 1571296-2 1571299-2 1571299-4 1571407-1 1571407-2 1571527-1 1571527-2 1571563-1 1571563-2 1571563-3 1571563-4 1-1571563-1 1-1571563-2 1571598-2 1571625-5 1571625-6 1571626-5 1571626-6 1571636-5 1571636-6 1612493-1 1612534-1 1612537-1 1612633-1 1612634-1 1612681-1 1612898-1 1612901-1 1674162-1 1674319-1 1674432-1 1674783-1 1674787-1 1674977-1 1674977-2 1705030-1 1705058-1 1705130-1 1705254-1 1-1705300-5 30 99 99 95 95 95 95 95 95 97 97 95 95 95 95 95 95 95 95 95 95 97 95 95 95 95 95 95 39 46 46 22 22 39 43 43 25 25 22 39 22 39 39 39 16 39 39 9 1-1705300-6 1-1705300-7 1-1705300-8 1-1705300-9 2-1705300-0 2-1705300-1 2-1705300-2 2-1705300-3 2-1705300-4 1705336-2 1705448-1 1-1705615-3 1-1705615-4 1-1705615-5 1-1705615-6 1-1705615-7 1-1705615-8 1-1705615-9 2-1705615-0 1705795-1 1-1705813-2 1-1705813-3 1-1705813-4 1-1705813-5 1-1705813-6 1-1705813-7 1-1705813-8 1-1705813-9 1717017-1 1717029-1 1717169-1 1717257-1 1717273-1 1717294-1 1717312-1 1717400-1 1717406-1 1717413-1 1717431-1 1717562-1 1717838-1 1717989-1 1720028-2 1734035-1 1734035-3 1734035-4 1-1734035-1 1-1734035-3 9 9 9 9 9 9 9 9 9 32 99 10 10 10 10 10 10 10 10 39 12 12 12 12 12 12 12 12 39 39 22 39 42 39 22 39 42 42 25 42 42 39 30 19 19 19 19 19 1734205-1 1-1734205-1 3-1734205-1 4-1734205-1 1734234-1 1734234-2 1734234-3 1734234-4 1734300-1 1734472-1 1734472-2 1734472-3 1-1734472-1 1-1734472-2 1-1734472-3 1746116-1 1746136-1 1746142-1 1746223-1 1746237-1 1746237-2 1746237-3 1746237-4 1746237-5 1746237-6 1746237-7 1746237-8 1746237-9 1-1746237-0 1-1746237-1 1-1746237-2 1-1746237-3 1-1746237-4 1-1746237-5 1-1746237-6 1-1746237-7 1-1746237-8 1-1746237-9 2-1746237-0 2-1746237-1 2-1746237-2 2-1746237-3 2-1746237-4 1746716-1 1746717-1 1746730-1 1746750-1 1746751-1 18 18 18 18 25 25 25 25 30 25 25 25 25 25 25 39 30 42 22 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 22 22 39 39 39 110 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 1746773-1 1746931-1 1747103-1 1747124-2 1747129-1 1747314-1 1-1747769-0 1-1747769-2 1-1747769-6 2-1747769-0 2-1747769-2 2-1747769-4 2-1747769-8 3-1747769-0 4-1747769-6 5-1747769-0 5-1747769-4 5-1747769-6 6-1747769-0 7-1747769-0 8-1747769-0 1750516-1 1775012-1 1775055-1 1775059-1 1775067-1 1775204-1 1775250-1 1825534-1 1827000-1 1827034-1 1827349-1 1827465-1 1827541-1 1827546-1 1827674-1 1827674-2 1827674-3 1827674-4 1827674-5 1827674-6 1827674-7 1827674-8 1827674-9 1-1827674-0 1-1827674-1 1-1827674-2 1-1827674-3 39 39 39 22 42 10 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 18 25 19 25 25 25 16 98 42 25 22 12 23 23 15 15 15 15 15 15 15 15 15 15 15 15 15 1-1827674-4 1-1827674-5 1-1827674-6 1-1827674-7 1-1827674-8 1-1827674-9 2-1827674-0 2-1827674-1 2-1827674-2 2-1827674-3 2-1827674-4 1827827-1 1827827-2 1827827-3 1827827-4 1827827-5 1827827-6 1827827-7 1827827-8 1827827-9 1-1827827-0 1-1827827-1 1-1827827-2 1-1827827-3 1-1827827-4 1-1827827-5 1-1827827-6 1-1827827-7 1-1827827-8 1-1827827-9 2-1827827-0 2-1827827-1 2-1827827-2 2-1827827-3 2-1827827-4 1827928-1 1857118-1 1857258-1 1857346-1 1857353-1 1857353-2 1857724-4 1871250-3 1871250-4 1-1871274-0 1-1871274-2 1-1871274-6 2-1871274-0 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 42 13 44 45 17 17 30 25 25 14 14 14 14 2-1871274-2 2-1871274-4 2-1871274-8 3-1871274-0 4-1871274-0 4-1871274-6 5-1871274-0 5-1871274-4 5-1871274-6 6-1871274-0 7-1871274-0 8-1871274-0 1-1871275-0 1-1871275-2 1-1871275-6 2-1871275-0 2-1871275-2 2-1871275-4 2-1871275-8 3-1871275-0 4-1871275-0 4-1871275-6 5-1871275-0 5-1871275-4 5-1871275-6 6-1871275-0 7-1871275-0 8-1871275-0 1871406-1 1-1871566-0 1-1871566-2 1-1871566-6 2-1871566-0 2-1871566-2 2-1871566-4 2-1871566-8 3-1871566-0 4-1871566-0 4-1871566-6 5-1871566-0 5-1871566-4 5-1871566-6 6-1871566-0 7-1871566-0 8-1871566-0 1871583-1 1871583-2 1871583-3 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 10 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 25 25 25 1871583-4 1871602-1 1871602-2 1871813-1 1871916-1 1903290-1 1903302-1 1939053-1 1939054-1 1981568-1 1981584-1 1981812-1 1981813-1 1981898-1 5338979-1 5338979-2 5338980-1 5338982-1 5338982-2 6337194-1 25 25, 26 25, 26 42 25 28 25 20 20 20 20 47 47 11 21 21 21 21 21 40 All specifications subject to change. Consult Tyco Electronics for latest specifications. 111 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 112 All specifications subject to change. Consult Tyco Electronics for latest specifications. Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Product Information Center: Phone: +1-800-522-6752 Fax: +1-717-986-7575 Troy, MI Phone: +1-248-273-3359 Fax: +1-248-273-3322 Asia/Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 Japan - Kawasaki, Kanagawa Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: Phone: +81-44-844-8013 Fax: +81-44-812-3200 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Malaysia - Selangor Phone: +60-3-7805-3055 Fax: +60-3-7805-3066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Vietnam - Ho Chi Minh City Phone: +84-8-930-5546 Fax: +84-8-930-3443 Europe/Middle East /Africa Austria - Vienna Phone: +43-1-905-60-0 Fax: +43-1-905-60-1333 Product Information Center: Phone: +43-1-905-60-1249 Fax: +43-1-905-60-1251 France - Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623 Belgium - Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352 France Export Divisions - Cergy-Pontoise Cedex Phone: +33-1-3420-8808 Fax: +33-1-3420-8300 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic and Slovakia Czech Republic - Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132 Denmark - Glostrup Phone: +45-43-48-04-00 Fax: +45-43-44-14-14 Egypt - Cairo Phone: +202-419-2334 Fax: +202-417-7647 Estonia - Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Greece - Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Product Information Center: Phone: +36-1-289-1016 Fax: +36-1-289-1017 Ireland - Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714 Israel - Petach-Tikva Phone: +972-3-929-0999 Fax: +972-3-919-1088 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Product Information Center: Phone: +39-011-4012-428 Fax: +39-011-40-287-428 Lithuania and Latvia Lithuania - Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403 South Africa - Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440 Netherlands - 's-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Norway - Nesbru Phone: +47-66-77-88-50 Fax: +47-66-77-88-55 Turkey - Istanbul Phone: +90-212-281-8181-83 +90-212-282-5130/5430 Fax: +90-212-281-8184 Poland - Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia - Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-502 Fax: +7-495-721-1893 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Ukraine - Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264 United Kingdom - Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only): +0800-267-666 Phone: +44-8706-080208 Fax: +44-208-420-8095 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 www.tycoelectronics.com Tyco Electronics AMP GmbH AMPerestr. 12-14 64625 Bensheim / Germany Phone: +49-(0)6251-133-0 Fax: +49-(0)6251-133-1600 www.tycoelectronics.com AMP, ELASTIBOOT, KAPTON, LAMFRAME, M/A-COM, RAYCHEM, STAX, TE Logo and Tyco Electronics are trademarks (c) 2007 Tyco Electronics Ltd. 1654270-2 Revised 8-2007 5M ST