International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand Single Phase D-70 Schottky D-70 1BQ20 1BQ40 20 40 1 1 45 45 0.65 0.65 1 1 30 30 31 31 60 60 5 5 2 2 3 3 6 6 7 7 Diode D-71 DF005S DF01S 50 100 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 82788 82788 DF02S DF04S 200 400 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 82788 82788 DF06S DF08S 600 800 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 82788 82788 DF10S 1000 1 40 1 1 30 31 60 5 2 5 6 7 15 82788 Diode DF005M DF01M D-70 50 100 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 6 6 7 7 15 15 82788 82788 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand D-70 Single Phase DF02M 200 1 40 1 1 30 31 60 5 2 6 7 15 82788 DF04M DF06M 400 600 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 6 6 7 7 15 15 82788 82788 DF08M DF10M 800 1000 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 6 6 7 7 15 15 82788 82788 Diode D-71 Available in Europe only 1B005S 50 1 40 1 1 30 31 60 5 2 5 6 7 15 1B01S 1B02S 100 200 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 1B04S 1B06S 400 600 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 1B08S 1B10S 800 1000 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 5 5 6 6 7 7 15 15 Diode D-70 Available in Europe only 1B005 50 1 40 1 1 30 31 60 5 2 6 7 15 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand D-70 Single Phase 1B01 100 1 40 1 1 30 31 60 5 2 6 7 15 1B02 1B04 200 400 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 6 6 7 7 15 15 1B06 1B08 600 800 1 1 40 40 1 1 1 1 30 30 31 31 60 60 5 5 2 2 6 6 7 7 15 15 1B10 1000 1 40 1 1 30 31 60 5 2 6 7 15 Diode D-38 1KAB05E 1KAB10E 50 100 1.5 1.5 45 45 1 1 1 1 50 50 52 52 10 10 2 2 4 4 6 6 15 15 82732 82732 1KAB20E 1KAB40E 200 400 1.5 1.5 45 45 1 1 1 1 50 50 52 52 10 10 2 2 4 4 6 6 15 15 82732 82732 1KAB60E 1KAB80E 600 800 1.5 1.5 45 45 1 1 1 1 50 50 52 52 10 10 2 2 4 4 6 6 15 15 82732 82732 1KAB100E 1000 1.5 45 1 1 50 52 10 2 4 6 15 82732 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand Single Phase D-37 Diode D-37 2KBB05 2KBB05R 50 50 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB10 2KBB10R 100 100 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB20 2KBB20R 200 200 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB40R 2KBB40 400 400 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB60R 2KBB60 600 600 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB80 2KBB80R 800 800 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 2KBB100 2KBB100R 1000 1000 2 2 45 45 1 1 3 3 50 50 52 52 10 10 2 2 3 3 4 4 6 6 82733 82733 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand Single Phase D-44 Diode D-44 2KBP005 2KBP01 50 100 2 2 50 50 1 1 2 2 60 60 63 63 10 10 2 2 3 3 4 4 6 6 82753 82753 2KBP02 2KBP04 200 400 2 2 50 50 1 1 2 2 60 60 63 63 10 10 2 2 3 3 4 4 6 6 82753 82753 2KBP06 2KBP08 600 800 2 2 50 50 1 1 2 2 60 60 63 63 10 10 2 2 3 3 4 4 6 6 82753 82753 2KBP10 1000 2 50 1 2 60 63 10 2 3 4 6 82753 Diode D-46 KBPC1005 50 3 50 1 1.5 50 55 10 2 82754 KBPC101 KBPC102 100 200 3 3 50 50 1 1 1.5 1.5 50 50 55 55 10 10 2 2 82754 82754 KBPC104 KBPC106 400 600 3 3 50 50 1 1 1.5 1.5 50 50 55 55 10 10 2 2 82754 82754 KBPC108 800 3 50 1 1.5 50 55 10 2 82754 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number Single Phase KBPC110 (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC K/W I RM (A) Notes Fax-on-Demand D-46 1000 3 50 1 1.5 50 55 10 2 82754 Diode D-72 KBPC6005 50 6 50 1 3 100 109 10 2 3 82754 KBPC601 100 6 50 1 3 100 109 10 200 6 50 1 3 100 109 10 3 3 82754 KBPC602 2 2 KBPC604 KBPC606 400 600 6 6 50 50 1 1 3 3 100 100 109 109 10 10 2 2 3 3 82754 82754 KBPC608 KBPC610 800 1000 6 6 50 50 1 1 3 3 100 100 109 109 10 10 2 2 3 3 82754 82754 KBPC8005 KBPC801 50 100 8 8 50 50 1 1 3 3 125 125 137 137 400 400 2 2 3 3 82789 82789 KBPC802 KBPC804 200 400 8 8 50 50 1 1 3 3 125 125 137 137 400 400 2 2 3 3 82789 82789 KBPC806 KBPC808 600 800 8 8 50 50 1 1 3 3 125 125 137 137 400 400 2 2 3 3 82789 82789 KBPC810 1000 8 50 1 3 125 137 400 2 3 82789 82754 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand D-34A Single Phase Diode D-34A Part Number- Europe 100JB05L 100JB1L 50 100 10 10 65 65 1.3 1.3 16 16 125 125 130 130 3.5 3.5 2 2 8 8 9 9 10 10 80715 80715 100JB2L 100JB4L 200 400 10 10 65 65 1.3 1.3 16 16 125 125 130 130 3.5 3.5 2 2 8 8 9 9 10 10 80715 80715 100JB6L 100JB8L 600 800 10 10 65 65 1.3 1.3 16 16 125 125 130 130 3.5 3.5 2 2 8 8 9 9 10 10 80715 80715 100JB10L 100JB12L 1000 1200 10 10 65 65 1.3 1.3 16 16 125 125 130 130 3.5 3.5 2 2 8 8 9 9 10 10 80715 80715 100JB14L 100JB16L 1400 1600 10 10 65 65 1.3 1.3 16 16 125 125 130 130 3.5 3.5 2 2 8 8 9 9 10 10 80715 80715 250JB05L 250JB1L 26MB05A 26MB10A 50 100 25 25 65 65 1.1 1.1 40 40 335 335 350 350 1.7 1.7 2 2 8 8 9 9 10 10 80715 80715 250JB2L 250JB4L 26MB20A 26MB40A 200 400 25 25 65 65 1.1 1.1 40 40 335 335 350 350 1.7 1.7 2 2 8 8 9 9 10 10 80715 80715 250JB6L 26MB60A 600 25 65 1.1 40 335 350 1.7 2 8 9 10 80715 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand D-34A Single Phase 250JB8L 26MB80A 800 25 65 1.1 40 335 350 1.7 2 8 9 10 80715 250JB10L 250JB12L 26MB100A 26MB120A 1000 1200 25 25 65 65 1.1 1.1 40 40 335 335 350 350 1.7 1.7 2 2 8 8 9 9 10 10 80715 80715 250JB14L 250JB16L 26MB140A 26MB160A 1400 1600 25 25 65 65 1.1 1.1 40 40 335 335 350 350 1.7 1.7 2 2 8 8 9 9 10 10 80715 80715 35MB05A 35MB10A 36MB05A 36MB10A 50 100 35 35 60 60 1.2 1.2 55 55 400 400 420 420 1.2 1.2 2 2 8 8 9 9 10 10 80715 80715 35MB20A 35MB40A 36MB20A 36MB40A 200 400 35 35 60 60 1.2 1.2 55 55 400 400 420 420 1.2 1.2 2 2 8 8 9 9 10 10 80715 80715 35MB60A 35MB80A 36MB60A 36MB80A 600 800 35 35 60 60 1.2 1.2 55 55 400 400 420 420 1.2 1.2 2 2 8 8 9 9 10 10 80715 80715 35MB100A 35MB120A 36MB100A 36MB120A 1000 1200 35 35 60 60 1.2 1.2 55 55 400 400 420 420 1.2 1.2 2 2 8 8 9 9 10 10 80715 80715 35MB140A 35MB160A 36MB140A 36MB160A 1400 1600 35 35 60 60 1.2 1.2 55 55 400 400 420 420 1.2 1.2 2 2 8 8 9 9 10 10 80715 80715 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand Three-Phase D-63 Diode D-63 26MT5 26MT10 50 100 25 25 70 70 1.26 1.26 40 40 300 300 314 314 1.42 1.42 2 2 8 8 10 10 80771 80771 26MT20 26MT40 200 400 25 25 70 70 1.26 1.26 40 40 300 300 314 314 1.42 1.42 2 2 8 8 10 10 80771 80771 26MT60 26MT80 600 800 25 25 70 70 1.26 1.26 40 40 300 300 314 314 1.42 1.42 2 2 8 8 10 10 80771 80771 26MT100 26MT120 1000 1200 25 25 70 70 1.26 1.26 40 40 300 300 314 314 1.42 1.42 2 2 8 8 10 10 80771 80771 26MT140 26MT160 1400 1600 25 25 70 70 1.26 1.26 40 40 300 300 314 314 1.42 1.42 2 2 8 8 10 10 80771 80771 36MT5 36MT10 50 100 35 35 60 60 1.19 1.19 40 40 400 400 420 420 1.16 1.16 2 2 8 8 10 10 80771 80771 36MT20 36MT40 200 400 35 35 60 60 1.19 1.19 40 40 400 400 420 420 1.16 1.16 2 2 8 8 10 10 80771 80771 36MT60 600 35 60 1.19 40 400 420 1.16 2 8 10 80771 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number Three-Phase 36MT80 (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand D-63 800 35 60 1.19 40 400 420 1.16 2 8 10 80771 36MT100 36MT120 1000 1200 35 35 60 60 1.19 1.19 40 40 400 400 420 420 1.16 1.16 2 2 8 8 10 10 80771 80771 36MT140 36MT160 1400 1600 35 35 60 60 1.19 1.19 40 40 400 400 420 420 1.16 1.16 2 2 8 8 10 10 80771 80771 Diode INT-A-Pak (B13) 60MT80K 800 60 85 1.75 100 350 370 0.37 2 8 11 87109 60MT100K 60MT120K 1000 1200 60 60 85 85 1.75 1.75 100 100 350 350 370 370 0.37 0.37 2 2 8 8 11 11 87109 87109 60MT140K 60MT160K 1400 1600 60 60 85 85 1.75 1.75 100 100 350 350 370 370 0.37 0.37 2 2 8 8 11 11 87109 87109 70MT80K 70MT100K 800 1000 70 70 85 85 1.55 1.55 100 100 400 400 420 420 0.292 0.292 2 2 8 8 11 11 87109 87109 70MT120K 70MT140K 1200 1400 70 70 85 85 1.55 1.55 100 100 400 400 420 420 0.292 0.292 2 2 8 8 11 11 87109 87109 70MT160K 1600 70 85 1.55 100 400 420 0.292 2 8 11 87109 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number Three-Phase 90MT80K (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak (B13) 800 90 90 1.6 150 650 680 0.21 2 8 11 87110 90MT100K 90MT120K 1000 1200 90 90 90 90 1.6 1.6 150 150 650 650 680 680 0.21 0.21 2 2 8 8 11 11 87110 87110 90MT140K 90MT160K 1400 1600 90 90 90 90 1.6 1.6 150 150 650 650 680 680 0.21 0.21 2 2 8 8 11 11 87110 87110 110MT80K 110MT100K 800 1000 110 110 90 90 1.4 1.4 150 150 800 800 840 840 0.178 0.178 2 2 8 8 11 11 87110 87110 110MT120K 110MT140K 1200 1400 110 110 90 90 1.4 1.4 150 150 800 800 840 840 0.178 0.178 2 2 8 8 11 11 87110 87110 110MT160K 130MT80K 1600 800 110 130 90 85 1.4 1.63 150 200 800 950 840 1000 0.178 0.155 2 2 8 8 11 11 87110 87111 130MT100K 130MT120K 1000 1200 130 130 85 85 1.63 1.63 200 200 950 950 1000 1000 0.155 0.155 2 2 8 8 11 11 87111 87111 130MT140K 130MT160K 1400 1600 130 130 85 85 1.63 1.63 200 200 950 950 1000 1000 0.155 0.155 2 2 8 8 11 11 87111 87111 160MT80K 160MT100K 800 1000 160 160 85 85 1.49 1.49 200 200 1200 1200 1260 1260 0.121 0.121 2 2 8 8 11 11 87111 87111 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC International Rectifier Bridges V RRM Part Number (V) I O (A) @T C (C) V @ FM I FM (V) (A) I FSM 50 Hz 60 Hz (A) (A) R JC (DC) K/W Notes Fax-on-Demand INT-A-Pak (B13) Three-Phase 160MT120K 1200 160 85 1.49 200 1200 1260 0.121 2 8 11 87111 160MT140K 160MT160K 1400 1600 160 160 85 85 1.49 1.49 200 200 1200 1200 1260 1260 0.121 0.121 2 2 8 8 11 11 87111 87111 NOTES: 1 Available on tape-and-reel 6 Io at ambient temperature 2 For Ifsm: 100% VRRM reapplied, Tj=Tj max.=150C 7 Rth is junction-to-ambient 8 Value given for RthJC is per module 3 For Irm: Tj = 150C 9 Vfm measured at Tj=25C 4 Available with 3mm and 5mm cropped leads. To specify, add suffix 'L3' for 3mm or 'L5' for 5mm, e.g. 1KAB10EL3. 10 RMS isolation voltage=2700V - 50Hz 5 VFM measured at Tj=Tj max. www.irf.com 11 RMS isolation voltage=4000V - 50Hz 12 For Ifsm: 100% VRRM reapplied, Tj=Tj max. 13 Additional packages available 14 Available leaded. To order, add 1 (or 2 for leaded and sleeved) to second digit of part number, e.g. 41HF10 or 42HF10 15 For Irm: Tj=25C 16 Cathode to stud. To order anode to stud, change 'N' to 'R' in part number (i.e. 8AF4RPP, SD600R08PC) 17 Cathode to stud. To order anode to stud, append 'R' to part letters, e.g. 12FR100 18 Available with metric stud. To order, add 'M' to part number, e.g. 6F10M, SD600N08MC