SD700C30L - Vishay [Semiconductors]

Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 14-May-08 1

Standard Recovery Diodes

(Hockey PUK Version), 700 A

SD700C..L Series

Vishay High Power Products

FEATURES

• Wide current range

• High voltage ratings up to 4500 V

• High surge current capabilities

• Diffused junction

• Hockey PUK version

• Case style DO-200AB (B-PUK)

• Lead (Pb)-free

TYPICAL APPLICATIONS

• Converters

• Power supplies

• High power drives

• Auxiliary system supplies for traction applications

ELECTRICAL SPECIFICATIONS

PRODUCT SUMMARY

IF(AV) 700 A

DO-200AB (B-PUK)

RoHS

COMPLIANT

MAJOR RATINGS AND CHARACTERISTICS

PARAMETER TEST CONDITIONS VALUES UNITS

IF(AV)

700 A

Ths 55 °C

IF(RMS)

1310 A

Ths 25 °C

IFSM

50 Hz 7500 A

60 Hz 7850

I2t50 Hz 281 kA2s

60 Hz 257

VRRM Range 3000 to 4500 V

TJ- 40 to 150 °C

VOLTAGE RATINGS

TYPE NUMBER VOLTAGE

CODE

VRRM, MAXIMUM REPETITIVE

PEAK REVERSE VOLTAGE

VRSM, MAXIMUM NON-REPETITIVE

PEAK REVERSE VOLTAGE

IRRM MAXIMUM

AT TJ = TJ MAXIMUM

SD700C..L

30 3000 3100

36 3600 3700

40 4000 4100

45 4600 4600

www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93552

2Revision: 14-May-08

SD700C..L Series

Vishay High Power Products Standard Recovery Diodes

(Hockey PUK Version), 700 A

Note

• The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC

FORWARD CONDUCTION

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum average forward current

at heatsink temperature IF(AV)

180° conduction, half sine wave

Double side (single side) cooled

700 (345) A

55 (85) °C

Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled 1310

Maximum peak, one-cycle forward,

non-repetitive surge current IFSM

t = 10 ms No voltage

reapplied

Sinusoidal half wave,

initial TJ = TJ maximum

7500

t = 8.3 ms 7850

t = 10 ms 100 % VRRM

reapplied

6310

t = 8.3 ms 6600

Maximum I2t for fusing I2t

t = 10 ms No voltage

reapplied

281

kA2s

t = 8.3 ms 257

t = 10 ms 100 % VRRM

reapplied

199

t = 8.3 ms 182

Maximum I2√t for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 2810 kA2√s

Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.88 V

High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.99

Low level value of forward

slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.78

mΩ

High level value of forward

slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.73

Maximum forward voltage drop VFM Ipk = 1000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.66 V

THERMAL AND MECHANICAL SPECIFICATIONS

PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS

Maximum junction operating

temperature range TJ- 40 to 150 °C

Maximum storage temperature range TStg - 55 to 200

Maximum thermal resistance,

junction to heatsink RthJ-hs

DC operation single side cooled 0.011 K/W

DC operation double side cooled 0.05

Mounting force, ± 10 % 9800

(1000)

(kg)

Approximate weight 250 g

Case style See dimensions - link at the end of datasheet DO-200AB (B-PUK)

ΔRthJ-hs CONDUCTION

CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS

SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE

180° 0.011 0.011 0.008 0.008

TJ = TJ maximum K/W

120° 0.014 0.015 0.014 0.014

90° 0.018 0.018 0.019 0.019

60° 0.026 0.026 0.027 0.028

30° 0.045 0.046 0.046 0.046

Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 14-May-08 3

SD700C..L Series

Standard Recovery Diodes

(Hockey PUK Version), 700 A Vishay High Power Products

Fig. 1 - Current Ratings Characteristics

Fig. 2 - Current Ratings Characteristics

Fig. 3 - Current Ratings Characteristics

Fig. 4 - Current Ratings Characteristics

Fig. 5 - Forward Power Loss Characteristics

Fig. 6 - Forward Power Loss Characteristics

100

110

120

130

140

150

0 100 200 300 400 500

30° 60° 90° 120° 180°

Average Forward Current (A)

Maximum Allowable Heatsink Temperature (°C)

SD700C..L Series

(Single Side Cooled)

R (D C ) = 0.11 K/W

th J-hs

Conduction Angle

100

110

120

130

140

150

0200400600800

30° 60°

90°

180°

120°

Average Forward Current (A)

Maximum Allowable Heatsink Temperature (°C)

SD700C..L Series

(Single Side Cooled)

R (DC) = 0.11 K/W

th J-hs

Conduction Period

100

120

140

160

180

0 500 1000 1500 2000 2500

30° 60° 90° 120° 180°

Average Forward Current (A)

Maximum Allowable Heatsink Temperature ( °C)

Conduction Angle

SD2000C..L Series

(Double Side Cooled)

R (D C ) = 0.031 K/W

th J- hs

100

110

120

130

140

150

0 200 400 600 800 1000 1200 1400

30°

60°

90°

180°

120°

Average Forward Current (A)

Maximum Allowable Heatsink Temperature (°C)

SD700C..L Series

(Double Side Cooled)

R (DC) = 0.05 K/W

thJ- hs

Conduction Period

500

1000

1500

2000

2500

0 200 400 600 800 1000

180°

120°

90°

60°

30°

Average Forward Current (A)

Maximum Average Forward Power Loss (W)

RMS Limit

SD700C..L Series

T = 150° C

Conduction Angle

500

1000

1500

2000

2500

0 200 400 600 800 1000 1200 1400

180°

120°

90°

60°

30°

Average Forward Current (A)

RMS Limit

Maximum Average Forw ard Power Loss (W)

SD 700 C..L S er ies

T = 150°C

Conduction Period

www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93552

4Revision: 14-May-08

SD700C..L Series

Vishay High Power Products Standard Recovery Diodes

(Hockey PUK Version), 700 A

Fig. 7 - Maximum Non-Repetitive Surge Current

Single and Double Side Cooled

Fig. 8 - Maximum Non-Repetitive Surge Current

Single and Double Side Cooled

Fig. 9 - Forward Voltage Drop Characteristics

Fig. 10 - Thermal Impedance ZthJ-hs Characteristics

2000

3000

4000

5000

6000

7000

001011

N um be r O f Eq ua l A m p lit ud e H a lf C y cl e C urr e nt P uls e s (N )

Peak Half Sine Wave Forward Current (A)

SD700C..L Series

Initial T = 150 °C

@ 60 Hz 0.0083 s

@ 50 Hz 0.0100 s

At Any Rated Load Condition And With

50% Rated V Applied Following Surge

RRM

1000

2000

3000

4000

5000

6000

7000

8000

9000

0.01 0.1 1

Pulse Train Duration (s)

Peak Half Sine W ave Forward Current (A)

Maximum Non Repetitive Surge Current

SD700C..L Series

50% Rated V Reapplied

No Voltage Reapplied

In itial T = 15 0 °C

RRM

Versus Pulse Train Duration.

100

1000

10000

0.511.522.533.54

T = 2 5°C

Instantaneous Forward Voltage (V)

In stant aneous Forward Current (A)

SD 700C..L Series

T = 150°C

0.001

0.01

0.1

0111.010.0100.0

Square W ave Pulse Duration (s)

SD700C..L Series

thJ-hs

Transient Thermal Im pedance Z (K/W )

Steady State Value

R = 0.11 K/W

(Single Side C ooled)

R = 0.05 K/W

(Double Side Cooled)

(D C O peration )

thJ-hs

Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com

Revision: 14-May-08 5

SD700C..L Series

Standard Recovery Diodes

(Hockey PUK Version), 700 A Vishay High Power Products

ORDERING INFORMATION TABLE

1- Diode

2- Essential part number

3- 0 = Standard recovery

4- C = Ceramic PUK

5- Voltage code x 100 = V

RRM

(see Voltage Ratings table)

L = PUK case DO-200AB (B-PUK)

Device code

51324

SD 70 0 C 45 L

LINKS TO RELATED DOCUMENTS

Dimensions http://www.vishay.com/doc?95246

Document Number: 95246 For technical questions, contact: indmodules@vishay.com www.vishay.com

Revision: 05-Nov-07 1

DO-200AB (B-PUK)

Outline Dimensions

Vishay Semiconductors

DIMENSIONS in millimeters (inches)

58.5 (2.30) DIA. MAX.

53 (2.09) DIA. MAX.

Quote between upper and lower pole pieces has to be considered after

application of mounting force (see Thermal and Mechanical Specifications)

3.5 (0.14) DIA. NOM. x

1.8 (0.07) deep MIN. both ends

0.8 (0.03)

both ends

34 (1.34) DIA. MAX.

2 places

26.9 (1.06)

25.4 (1)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.