Aluminum Electrolytic Capacitor/FM
-40 to + 105°C
6.3 to 50 V .DC
22 to 6800 µ F
±20 % (120Hz/+20°C)
60 120 1k
10k
100k
Japan
Malaysia
China
6.3 to 50 22 to 33
47 to 330
390 to 1000
1200 to 6800
L
L<16:L+1.5max
fd±
0.05
14 min 3
min
fD+0.5 max
f10<
P
±
0.5
fD+0.5 max
f8>
P
±
0.5
L>20:L+2.0 max
Low impedance(40 to 70% less than FC Series)
Endurance : 2000 to 7000 hours at +105°C
Radial Lead Type
n
Features
Category temp. range
Rated W.V. Range
Nominal Cap. Range
n Specifications
DC Leakage Current
Capacitance Tolerance
Endurance
Shelf Life
I < 0.01 CV (µA)
after 2 minutes application of rated working voltage at +20°C
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified bellow.
Duration : 3000hours (f8), 4000 hours (f10), 5000 hours (f12.5 to 18)
Post test requirement at +20 °C
Capacitance change
tan d
DC leakage current
±25% of initial measured value (6.3V~10V:±30%)
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitor shall meet the limits specified in Endurance.(With voltage treatment)
W.V.(V.DC)
Capacitance
(µF)
Frequency(Hz)
Sleeve
Vent
n Dimensions in mm (not to scale)
Add 0.02 per 1000µF for products of 1000µF or more.
Series:
0.45
0.60
0.65
0.75
0.55
0.70
0.75
0.80
0.75
0.85
0.90
0.95
0.90
0.95
0.98
1.00
1.00
1.00
1.00
1.00
Body Dia. fD
Body Length L
Lead Dia. fd
Lead space P
0.5 0.5 0.6 0.6 0.6 0.8 0.8
2 2.5 3.5 5.0 5.0 5.0 7.5
5 6.3 8 10 12.5 16
12.5 to 25 30 to 35
W.V. 6.3 10 16 25 35 50
tan d 0.22 0.19 0.16 0.14 0.12 0.10
(max.) (120Hz/+20C°)
tan d
Country of Origin
FM
Type:
A
n
Frequency correction factor for ripple current
Design, and specifications are each subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Rev.02/04
Aluminum Electrolytic Capacitor/FM
n Case size VS Impedance
W.V.(V.DC)
+20°C -10°C
Case size
(fD´L)
´
´
´
´
´
´
´
´
´
´
´
´
´
´
´
5 11 0.300 1.000 280 0.340 1.130 250
6.3 11.2 0.130 0.430 455 0.140 0.460 406
8 11.5 0.056 0.168 950 0.061 0.183 870
8 15 0.041 0.123 1240 0.045 0.135 1140
8 20 0.030 0.090 1560 0.033 0.099 1430
10 12.5 0.038 0.114 1290 0.042 0.126 1170
10 16 0.026 0.078 1790 0.030 0.090 1650
10 20 0.019 0.057 2180 0.023 0.069 1890
10 25 0.018 0.054 2470 0.022 0.066 2150
12.5 20 0.018 0.045 2600 0.022 0.055 2260
12.5 25 0.015 0.038 3190 0.018 0.045 2660
12.5 30 0.013 0.033 3630 0.016 0.040 3160
12.5 35 0.012 0.030 3750 0.014 0.035 3270
16 20 0.017 0.043 3300 0.019 0.048 2870
16 25 0.014 0.035 3820 0.016 0.040 3320
Impedance
(W /100kHz)
Ripple current
(mA.rms./100kHz)
+105°C
Ripple current
(mA.rms./100kHz)
Impedance
(W /100kHz)
+20°C -10°C+105°C
6.3 to 35 50
Design, and specifications are each subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Aluminum Electrolytic Capacitor/FM
(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)
(m A ) (W)
(V) (hours) (mm)
150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM0J151 200 2000
330 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM0J331 200 2000
560 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J561 200 1000
820 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM0J821L 200 1000
1200 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM0J122L 200 1000
1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102 200 500
1200 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122 200 500
1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152 200 500
2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L 200 500
3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332 200 500
3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM0J392 200 500
4700 12.5 30 3630 0.013 7000 0.8 5.0 5.0 EEUFM0J472L 100
5600 12.5 35 3750 0.012 7000 0.8 5.0 5.0 EEUFM0J562L 100 250
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM0J562S 100 250
6800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM0J682 100 250
100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1A101 200 2000
220 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1A221 200 2000
470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1A471 200 1000
680 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1A681L 200 1000
1000 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1A102L 200 1000
680 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681 200 500
1000 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102 200 500
1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122 200 500
1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L 200 500
2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222 200 500
3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332 200 500
3900 12.5 30 3630 0.013 7000 0.8 5.0 5.0 EEUFM1A392 100
4700 12.5 35 3750 0.012 7000 0.8 5.0 5.0 EEUFM1A472L 100 250
3900 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1A392S 100 250
5600 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1A562 100 250
68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1C680 200 2000
120 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1C121 200 2000
330 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1C331 200 1000
470 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1C471L 200 1000
680 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1C681L 200 1000
470 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1C471 200 500
680 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1C681 200 500
1000 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1C102 200 500
1200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1C122L 200 500
1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1C152 200 500
W.V. Cap
(±20%)
Case size
Dia. Length Ripple
current
(100kHz)
(+105°C)
Impedance
(100kHz)
(+20°C)
Endur-
ance
Specification Lead size
Lead
Dia.
Lead space
Straight Taping
i Bi H
Part No
Min.Packaging
QÕty
Long
Lead
Taping
n Standard Products
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
6.3
16
10
Design, and specifications are each subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Aluminum Electrolytic Capacitor/FM
(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)
(m A ) (W)
(V) (hours) (mm)
2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1C222 200 500
2700 12.5 30 3630 0.013 7000 0.8 5.0 5.0 EEUFM1C272L 100
3300 12.5 35 3750 0.012 7000 0.8 5.0 5.0 EEUFM1C332L 100 250
2700 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1C272S 100 250
3900 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1C392 100 250
47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1E470 200 2000
100 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101 200 2000
220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221 200 1000
330 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1E331L 200 1000
470 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1E471L 200 1000
330 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331 200 500
470 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471 200 500
680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681 200 500
820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L 200 500
1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102 200 500
1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152 200 500
1800 12.5 30 3630 0.013 7000 0.8 5.0 5.0 EEUFM1E182L 100
2200 12.5 35 3750 0.012 7000 0.8 5.0 5.0 EEUFM1E222L 100 250
1800 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1E182S 100 250
2700 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1E272 100 250
33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1V330 200 2000
68 6 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1V680 200 2000
150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151 200 1000
220 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1V221L 200 1000
330 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1V331L 200 1000
220 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221 200 500
330 10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331 200 500
470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471 200 500
560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L 200 500
680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681 200 500
1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102 200 500
1200 12.5 30 3630 0.013 7000 0.8 5.0 5.0 EEUFM1V122L 100
1500 12.5 35 3750 0.012 7000 0.8 5.0 5.0 EEUFM1V152L 100 250
1200 16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S 100 250
1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182 100 250
22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220 200 2000
56 6 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 EEUFM1H560 200 2000
100 8 11.5 950 0.061 3000 0.6 3.5 5.0 EEUFM1H101 200 1000
120 8 15 1240 0.045 3000 0.6 3.5 5.0 EEUFM1H121L 200 1000
180 8 20 1560 0.033 4000 0.6 3.5 5.0 EEUFM1H181L 200 1000
W.V. Cap
(±20%)
Case size
Dia. Length Ripple
current
(100kHz)
(+105°C)
Impedance
(100kHz)
(+20°C)
Endur-
ance
Specification Lead size
Lead
Dia.
Lead space
Straight Taping
i Bi H
Part No
Min.Packaging
QÕty
Long
Lead
Taping
n Standard Products
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
The taping dimentions are explained on p.188 of our Catalog. Please use it as a reference guide.
16
35
50
25
Design, and specifications are each subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
Aluminum Electrolytic Capacitor/FM
(mm) (mm) (mm) (pcs) (pcs)(µF) (mm) (mm)
(m A ) (W)
(V) (hours) (mm)
150 10 12.5 1290 0.042 4000 0.6 5.0 5.0 EEUFM1H151 200 500
220 10 16 1790 0.030 4000 0.6 5.0 5.0 EEUFM1H221 200 500
270 10 20 2180 0.023 5000 0.6 5.0 5.0 EEUFM1H271 200 500
330 10 25 2470 0.022 5000 0.6 5.0 5.0 EEUFM1H331L 200 500
470 12.5 20 2600 0.022 5000 0.6 5.0 5.0 EEUFM1H471 200 500
560 12.5 25 3190 0.018 7000 0.6 5.0 5.0 EEUFM1H561 200 500
680 12.5 30 3630 0.016 7000 0.8 5.0 5.0 EEUFM1H681L 100
820 12.5 35 3750 0.014 7000 0.8 5.0 5.0 EEUFM1H821L 100 250
16 20 3300 0.019 5000 0.8 7.5 7.5 EEUFM1H821S 100 250
1000 16 25 3820 0.016 7000 0.8 7.5 7.5 EEUFM1H102 100 250
W.V. Cap
(±20%)
Case size
Dia. Length Ripple
current
(100kHz)
(+105°C)
Impedance
(100kHz)
(+20°C)
Endur-
ance
Specification Lead size
Lead
Dia.
Lead space
Straight Taping
i Bi H
Part No
Min.Packaging
QÕty
Long
Lead
Taping
n Standard Products
50
Design, and specifications are each subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
The taping dimenions are explained in the Packaging Information notes. Please use it as a reference guide.
