3MTM PC Card Header Single Slot, Low Profile, No Ejector, Standard Footprint MCH Series Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Stand-off height options ESD clips and plastic pegs for secure hold-down * See Regulatory Information Appendix (RIA) for regulatory compliance information ED * * * * * TS-2114-C Sheet 1 of 3 U Date Modified: August 8, 2008 N IS C Mechanical: LCP UL 94V-0 Black Copper Alloy 50 [ 1.27 m ] Nickel Gold flash over 27 [ 0.68 m ] PdNi 100 [ 2.54 m ] Tin/Lead or Reflowed Tin (See Ordering Information) O Insulation Material: Insulation Flammability: Insulation Color: Contact Material: Plating Underplating: Plating Wiping Area: Plating Solder Tails: TI N Physical Electrical D Durability-Office Environment: 10,000 cycles minimum Insertion Force: 8.8 lbs. ( 39.2 N ) maximum Extraction Force: 1.5 lbs. ( 6.67 N ) minimum and 8.8 lbs. ( 39.2 N ) maximum Current Rating: 0.5 A Insulation Resistance: > 5 x 109 at 500 VDC Withstanding Voltage: 500 VRMS for 1 Minute Environmental Temperature Rating: -20C to +60C, 95% RH Non-condensing Process Temperature: 260C (per J-STD-020C) Operating Environment: UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM PC Card Header .197 .004 5.00 .10 POWER PINS Single Slot, Low Profile, No Ejector, Standard Footprint MCH Series .301 7.65 2.480 62.99 .223 5.66 2.018 51.26 W .118 3.00 .065 1.65 W .167 .004 4.24 0.1 GENERAL USE PINS .482 12.24 2.540 64.52 ED .137 .004 3.48 0.1 DETECT PINS XXXX C L OF CARD 3.294 83.66 TI N U 2.677 68.00 2.016 51.21 STANDOFF HEIGHT O D .138 3.51 TOTAL COMPONENT HEIGHT 5.0 V KEY SHOWN PIN 1 IS C .050 1.27 5.0 V KEY .091 2.31 3.3 V KEY N 2.480 62.99 PIN 35 PIN 36 C LC L Ordering Information Insulator Body Style 01 = No standoff 03 = 7.0 mm standoff 07 = 5.0 mm standoff .197 5.00 PIN 67 MATING C L PCB TO CENTERLINE PIN 51 .050 1.27 2.134 54.20 PIN 34 PIN 17 C L .135 3.42 45 5 1.650 41.91 PIN 68 MCH - 068TAN - XX LPK X - XX Keying Blank = 5.0 volt 3 = 3.3 volt Plating Suffix: TR30 = PdNi w/ Au flash and Sn-Pb solder tails (RIA E3 & C2 apply) LL = PdNi w/ Au flash and Sn solder tails (RIA E1 & C1 apply) TS-2114-B Sheet 2 of 3 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM PC Card Header Single Slot, Low Profile, No Ejector, Standard Footprint MCH Series .459 11.66 .385 9.78 .030 .76 R .065 1.65 .140 3.56 .118 .010 3.00 0.25 .215 5.46 .290 7.37 SECTION W-W Stand-off Height MCH-068TAN01LPKX-XX .000 [ 0.00 ] MCH-068TAN07LPKX-XX Total Component Height .106 [ 2.70 ] .222 [ 5.64 ] .275 [ 7.00 ] .382 [ 9.70 ] .498 [ 12.64 ] .197 [ 5.00 ] .303 [ 7.70 ] .419 [ 10.64 ] TI N MCH-068TAN03LPKX-XX PC Board to Center Line U Part Description ED VIEW ROTATED 90 CLOCKWISE .087 .002 2.21 0.05 UNPLATED l O .002 [0.05] M A M B PIN 34 PIN 36 .250 6.35 2.480 62.99 PIN 34 1.650 41.91 PIN 35 2.540 64.52 -A- 2.018 51.26 D IS C PIN 2 O N 2X O .050 1.27 PIN 33 .039 .002 0.99 0.05 PLATED THRU HOLE l O .002 [0.05] M A M B STANDOFF FOOTPRINT NO COMPONENTS 68X O PIN 67 .002 2X O .087 2.21 0.05 PLATED THRU HOLE l O .002 [0.05] M A M B .328 8.32 PIN 68 3X .075 1.90 .400 10.16 .150 3.80 .240 6.10 2.000 50.80 INSERT CARD 2.320 58.93 RECOMMENDED MOUNTING HOLE LAYOUT SHOWN ON CONNECTOR SIDE OF BOARD 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-2114-B Sheet 3 of 3 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. ED Appendix E2: European Union RoHS TI N U Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. O Appendix E3: European Union RoHS N In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. IS C Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. D In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 TI N U ED Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. N The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. D IS C O Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007