Schottky Barrier Rectifier MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode MBR2060CT RoHS Pb Description The Littelfuse MBR2060CT Schottky Barrier Rectifier is designed to comply with the general requirements of commercial applications for high temperature environments with low leakage and low VF parameters. It is suitable for high frequency switching mode power supply applications with high inductive loads. This Schottky Barrier diode pair can be used as free-wheeling or flyback diodes to suppress abrupt changes across an inductive load. Features Pin out Heat sink * H igh junction temperature capability Heat sink Common Cathode Common Cathode * Low forward voltage drop * C ommon cathode configuration in TO-220AB package * H igh frequency operation 1 Anode 3 Anode Pinout 1 D2-PAK & D-PAK Common Cathode 1 Applications 3 * Switching mode power Anode Common Anode Cathode supply 3 2 1 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Heat sink Symbol Peak Inverse Voltage Anode 1Max. Peak 2 One 3Cycle Non-Repetitive Surge Cathode 1 Max Unit V VRWM - 60 IF(AV) 50% duty cycle @TC =100C, rectangular wave form 10 (per leg) IFSM Anode 2 8.3 ms, half Sine pulse 20 (total device) 180 A A Pinout 5 TO-220AC Symbol VF1 Forward Voltage Drop VF2 Reverse Current (per leg)* Test Conditions Cathode Common Cathode Average Forward Cathode Current Parameters * Polarity protection diodes Common Cathode Parameters Pinout 4 ITO-220AB Common Anode Electrical Characteristics * DC/DC converters * F ree-wheeling diodes (also known as snubber Pinout 3 ITO-220AB diodes) Maximum Ratings Current (per leg) 2 Test Conditions Max @10A, Pulse, TJ = 25 C 0.80 @20A, Pulse, TJ = 25 C 0.95 @10A, Pulse, TJ = 125 C 0.70 @20A, Pulse, TJ = 125 C 0.85 IR1 @VR = rated VR TJ = 25 C 1.0 IR2 @VR = rated VR TJ = 125 C 150 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 C, fSIG = 1MHz 400 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH dv/dt - 10,000 V/s Voltage Rate of Change * Pulse Width < 300s, Duty Cycle <2% (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/01/18 Schottky Barrier Rectifier MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode Thermal-Mechanical Specifications Symbol Test Conditions Max Unit Junction Temperature Parameters TJ - -55 to +150 C Storage Temperature Tstg - -55 to +150 C Maximum Thermal Resistance Junction to Case RJC DC operation 2.3 C/W Typical Thermal Resistance Case to Heat Sink RCS Mounting surface, smooth and greased 0.5 C/W wt - 2 g Approximate Weight TO-220AB Instantaneous Forward Current - IF (mA) Figure 1: Typical Forward Characteristics C C Forward Voltage - VF (V) Junction Capacitance - CT (PF) Figure 3: Typical Junction Capacitance C Reverse Voltage - VR (V) (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/01/18 Figure 2: Typical Reverse Characteristics Instantaneous Reverse Current - IR (mA) Case Style C C Reverse Voltage - VR (V) Schottky Barrier Rectifier MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode Dimensions- TO-220AB Symbol Millimeters Min Max A 3.56 4.83 A1 0.51 1.40 A2 2.03 2.92 b 0.38 1.02 b1 1.14 1.78 c 0.31* 0.61 D 14.22 16.51 D1 8.38 9.15* E 9.65 10.67 e 2.54 - e1 4.98* - H1 5.84 6.86 L 12.70 14.73 L1 - 6.35 oP 3.53 4.09 Q 2.54 3.43 Footnote *: The spec. does not comply with JEDEC spec. Packing Options Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q. MBR2060CT MBR2060CT 50pcs / Tube 1000 Tube Specification 7mm 530mm 32mm (c)2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 10/01/18 LF YYWWL MBR B 20 MBR 60 BCT 20 LF 60 YY CT WW LF L YY WW L =Component Type =Package Type =Forward Current (20A) = Device Voltage Type (60V) =Reverse = Package type =Configuration = Forward Current (20A) =Littelfuse = Reverse Voltage (60V) =Year = Configuration =Week = Littelfuse =Lot Number = Year = Week = Lot Number