©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 10/01/18
MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode
Schottky Barrier Rectifier
MBR2060CT
Maximum Ratings
Parameters Symbol Test Conditions Max Unit
Peak Inverse Voltage VRWM - 60 V
Average Forward Current IF(AV)
50% duty cycle @TC =100°C,
rectangular wave form 10 (per leg) A
20 (total device)
Max. Peak One Cycle Non-Repetitive Surge
Current (per leg) IFSM 8.3 ms, half Sine pulse 180 A
Pin out
RoHS
Pb
Electrical Characteristics
Parameters Symbol Test Conditions Max Unit
Forward Voltage Drop
VF1
@10A, Pulse, TJ = 25 °C 0.80
V
@20A, Pulse, TJ = 25 °C 0.95
VF2
@10A, Pulse, TJ = 125 °C 0.70
@20A, Pulse, TJ = 125 °C 0.85
Reverse Current (per leg)* IR1 @VR = rated VR TJ = 25 °C 1.0 mA
IR2 @VR = rated VR TJ = 125 °C 150
Junction Capacitance (per leg) CT@VR = 5V, TC = 25 °C, fSIG = 1MHz 400 pF
Typical Series Inductance (per leg) LSMeasured lead to lead 5 mm from package body 8.0 nH
Voltage Rate of Change dv/dt - 10,000 V/μs
* Pulse Width < 300μs, Duty Cycle <2%
Description
Applications
The Littelfuse MBR2060CT Schottky Barrier Rectifier
is designed to comply with the general requirements
of commercial applications for high temperature
environments with low leakage and low VF parameters.
It is suitable for high frequency switching mode power
supply applications with high inductive loads. This Schottky
Barrier diode pair can be used as free-wheeling or flyback
diodes to suppress abrupt changes across an inductive
load.
• Switching mode power
supply
• Free-wheeling diodes
(also known as snubber
diodes)
• DC/DC converters
• Polarity protection diodes
Features
• High junction temperature
capability
• Low forward voltage drop
• High frequency operation
• Common cathode
configuration in TO-220AB
package
Pinout 1
D2-PAK & D-PAK
Common Cathode
Pinout 2
TO-220AB
Common Cathode Pinout 3
ITO-220AB
Common Cathode
Pinout 4
ITO-220AB
Common Anode
Heat sink
Common
Cathode
1
3
Heat sink
1
3
2
1
3
2
Cathode
Cathode
1
3
2
Common
Anode
Common
Cathode
Common
Cathode
Anode
Anode
Anode Anode Anode Anode
Common
Cathode
Heat sink
1
2
Pinout 5
TO-220AC
Cathode
Cathode Anode
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 10/01/18
MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode
Schottky Barrier Rectifier
Thermal-Mechanical Specifications
Parameters Symbol Test Conditions Max Unit
Junction Temperature TJ - -55 to +150 °C
Storage Temperature Tstg - -55 to +150 °C
Maximum Thermal Resistance Junction
to Case RƟJC DC operation 2.3 °C/W
Typical Thermal Resistance
Case to Heat Sink RƟCS Mounting surface, smooth and greased 0.5 °C/W
Approximate Weight wt - 2 g
Case Style TO-220AB
Figure 1: Typical Forward Characteristics
ºC
ºC
Instantaneous Forward Current - I
F
(mA)
Forward Voltage - V
F
(V)
Figure 2: Typical Reverse Characteristics
ºC
Junction Capacitance - C
T
(P
F
)
Reverse Voltage - V
R
(V)
Figure 3: Typical Junction Capacitance
ºC
ºC
Instantaneous Reverse Current - I
R
(mA)
Reverse Voltage - V
R
(V)
©2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revision: 10/01/18
MBR2060CT, 2x 10A, 60V, TO-220AB, Common Cathode
Schottky Barrier Rectifier
Packing Options
Part Number Marking Packing Mode M.O.Q.
MBR2060CT MBR2060CT 50pcs / Tube 1000
Part Numbering and Marking System
LF = Littelfuse
MBR = Device Type
B = Package type
20 = Forward Current (20A)
60 = Reverse Voltage (60V)
CT = Configuration
YY = Year
WW = Week
L = Lot Number
LF YYWWL
Tube Specification
32mm
7mm
530mm
Dimensions- TO-220AB
Symbol Millimeters
Min Max
A 3.56 4.83
A1 0.51 1.40
A2 2.03 2.92
b 0.38 1.02
b1 1.14 1.78
c 0.31* 0.61
D 14.22 16.51
D1 8.38 9.15*
E 9.65 10.67
e 2.54 -
e1 4.98* -
H1 5.84 6.86
L 12.70 14.73
L1 - 6.35
øP 3.53 4.09
Q 2.54 3.43
Footnote *: The spec. does not comply with JEDEC spec.
MBR =Component Type
B=Package Type
20 =Forward Current (20A)
60 =Reverse Voltage (60V)
CT =Configuration
LF =Littelfuse
YY =Year
WW =Week
L =Lot Number
