SFH6156 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES A 1 4 C * Excellent CTR linearity depending on forward current C 2 3 E * Isolation test voltage, 5300 VRMS * Fast switching times 17448-3 * Low CTR degradation V D E 1 17448-5 * Low coupling capacitance * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DESCRIPTION The SFH6156 features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic SMD package. APPLICATIONS * Switchmode power supply * Telecom * Battery powered equipment The coupling devices are designed for signal transmission between two electrically separated circuits. AGENCY APPROVALS The coupler is end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. * UL1577, file no. E52744 system code H or J, double protection * DIN EN 60747-5-5 (VDE0884) available with option 1 ORDERING INFORMATION S F H 6 1 PART NUMBER 5 6 # # CTR BIN SMD-4, 100 mil, pitch VDE, UL, cUL, BSI SMD-4, 100 mil, pitch X 0 0 1 PACKAGE OPTION T SMD-4 TAPE AND REEL > 8 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, BSI - 10 mA 40 to 80 63 to 125 100 to 200 SFH6156-1 SFH6156-1T SFH6156-2 SFH6156-2T SFH6156-3 SFH6156-3T 40 to 80 63 to 125 100 to 200 SFH6156-1X001 SFH6156-1X001T SFH6156-2X001 SFH6156-2X001T - Document Number: 83671 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 SFH6156 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V DC forward current IF 60 mA IFSM 2.5 A Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V tp 10 s Surge forward current OUTPUT IC 50 mA tp 1 ms IC 100 mA t=1s VISO 5300 VRMS Creepage distance 7 mm Clearance distance 7 mm 0.4 mm Collector current COUPLER Isolation test voltage between emitter and detector Insulation thickness between emitter and detector Comparative tracking index per DIN IEC112/VDE0303 part 1 Isolation resistance CTI 175 VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Tstg - 55 to + 150 C Tamb - 55 to +100 C Tsld 260 C Storage temperature range Ambient temperature range max. 10 s, dip soldering distance to seating plane 1.5 mm Soldering temperature (1) Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Ptot - Power Dissipation (mW) 200 150 Phototransistor 100 50 Diode 0 0 18483 25 50 75 100 125 150 Tamb - Ambient Temperature (C) Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature Document Number: 83671 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 SFH6156 www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS PARAMETER SYMBOL VALUE UNIT LED power dissipation Pdiss 100 mW Output power dissipation Pdiss 150 mW Maximum LED junction temperature Tjmax. 125 C Maximum output die junction temperature Tjmax. 125 C Thermal resistance, junction emitter to board EB 173 C/W Thermal resistance, junction emitter to case EC 149 C/W Thermal resistance, junction detector to board DB 111 C/W Thermal resistance, junction detector to case DC 127 C/W Thermal resistance, junction emitter to junction detector ED 95 C/W Thermal resistance, board to ambient (1) BA 195 C/W TA CA Package TC EC DC DE TJD TJE DB EB TB BA 19996 Thermal resistance, case to ambient (1) CA 3573 TA C/W Notes * The thermal model is represented in the thermal network below. Each resistance value given in this model can be used to calculate the temperatures at each node for a given operating condition. The thermal resistance from board to ambient will be dependent on the type of PCB, layout and thickness of copper traces. For a detailed explanation of the thermal model, please reference Vishay's thermal characteristics of optocouplers application note. (1) For 2 layer FR4 board (4" x 3" x 0.062") ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 60 mA VF 1.25 1.65 V Reverse current VR = 6 V IR 0.01 10 A VR = 0 V, f = 1 MHz CO 13 Capacitance pF OUTPUT Collector emitter capacitance Collector emitter leakage current VCE = 5 V, f = 1 MHz VCE = 10 V CCE 5.2 SFH6156-1 ICEO 2 SFH6156-2 ICEO SFH6156-3 ICEO SFH6156-4 pF 50 nA 2 50 nA 5 100 nA ICEO 5 100 nA VCEsat 0.25 0.4 V CC 0.4 COUPLER Collector emitter saturation voltage Coupling capacitance IF = 10 mA, IC = 2.5 mA pF Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 83671 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 SFH6156 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA, VCE = 5 V IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT SFH6156-1 CTR 40 TYP. 80 % SFH6156-2 CTR 63 125 % SFH6156-3 CTR 100 200 % SFH6156-4 CTR 160 320 % SFH6156-1 CTR 13 30 % SFH6156-2 CTR 22 45 % SFH6156-3 CTR 34 70 % SFH6156-4 CTR 56 90 % MIN. TYP. SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MAX. UNIT NON-SATURATED Rise time IF = 10 mA, VCC = 5 V, TA = 25 C, RL = 75 tr 2 s Fall time IF = 10 mA, VCC = 5 V, TA = 25 C, RL = 75 tf 2 s Turn-on time IF = 10 mA, VCC = 5 V, TA = 25 C, RL = 75 ton 3 s Turn-off time IF = 10 mA, VCC = 5 V, TA = 25 C, RL = 75 toff 2.3 s Cut-off frequency IF = 10 mA, VCC = 5 V, TA = 25 C, RL = 75 fctr 250 kHz VCC = 5 V, TA = 25 C, RL = 1 k, IF = 20 mA SFH6156-1 tr 2 s SFH6156-2 tr 3 s SFH6156-3 tr 3 s SFH6156-4 tr 4 s VCC = 5 V, TA = 25 C, RL = 1 k, IF = 20 mA SFH6156-1 tf 11 s SFH6156-2 tf 14 s SFH6156-3 tf 14 s SFH6156-4 tf 15 s VCC = 5 V, TA = 25 C, RL = 1 k, IF = 20 mA SFH6156-1 ton 3 s SFH6156-2 ton 4.2 s SFH6156-3 ton 4.2 s SFH6156-4 ton 6 s VCC = 5 V, TA = 25 C, RL = 1 k, IF = 20 mA SFH6156-1 toff 18 s SFH6156-2 toff 23 s SFH6156-3 toff 23 s SFH6156-4 toff 25 s SATURATED Rise time VCC = 5 V, TA = 25 C, RL = 1 k, IF = 10 mA VCC = 5 V, TA = 25 C, RL = 1 k, IF = 5 mA Fall time VCC = 5 V, TA = 25 C, RL = 1 k, IF = 10 mA VCC = 5 V, TA = 25 C, RL = 1 k, IF = 5 mA Turn-on time VCC = 5 V, TA = 25 C, RL = 1 k, IF = 10 mA VCC = 5 V, TA = 25 C, RL = 1 k, IF = 5 mA Turn-off time VCC = 5 V, TA = 25 C, RL = 1 k, IF = 10 mA VCC = 5 V, TA = 25 C, RL = 1 k, IF = 5 mA SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. MAX. UNIT 55/100/21 Comparative tracking index CTI 175 VIOTM 10 000 VIORM 890 399 Vpeak Vpeak PSO 400 mW ISI 275 mA TSI 175 C Creepage distance 7 mm Clearance distance 7 mm 0.4 mm Insulation thickness, reinforced rated per IEC 60950 2.10.5.1 Note * As per IEC 60747-5-5, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Document Number: 83671 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 SFH6156 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 30 IF =14 mA R L = 75 IF 12 mA VCC = 5 V 20 10 mA IC (mA) IC 8 mA 6 mA 10 47 4 mA 1 mA 0 isfh615a_01 0 5 10 15 VCE (V) isfh615a_04 Fig. 2 - Linear Operation (without Saturation) 2 mA Fig. 5 - Output Characteristics (Typ.) Collector Current vs. Collector Emitter Voltage 1.2 25 50 75 1 1.1 V CC = 5 V VF (V) IF 1.0 47 0.9 isfh615a_02 10- 1 100 Fig. 3 - Switching Operation (with Saturation) 101 102 IF (mA) isfh615a_05 Fig. 6 - Diode Forward Voltage (Typ.) vs. Forward Current 103 20 IF = 10 mA, VCE = 5 V 5 f = 1 MHz 15 3 C (pF) IC (%) I 4 2 102 1 10 CCE 5 5 101 - 25 isfh615a_03 0 0 25 50 75 TA (C) Fig. 4 - Current Transfer Ratio (Typ.) vs. Temperature 10-2 isfh615a_06 10-1 100 101 102 Ve (V) Fig. 7 - Transistor Capacitance (Typ.) vs. Collector Emitter Voltage Document Number: 83671 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 SFH6156 www.vishay.com 104 D= tp T tp IF T IF (mA) 103 D=0 0.005 0.01 0.02 0.05 0.1 Vishay Semiconductors 102 0.2 0.5 DC 10 Pulse cycle D = parameter 1 10- 5 10- 4 10- 3 10- 2 10- 1 100 101 tp (s) isfh615a_07 Fig. 8 - Permissible Pulse Handling Capability Forward Current vs. Pulse Width PACKAGE DIMENSIONS millimeters 0.76 pin one ID R0.25 2.54 1.78 6.48 6.81 8 min. 11.05 3 4 9.53 10.03 4.55 4.83 0.76 1.14 1.52 7.52 7.90 0.79 typ. 10 3.30 3.81 0.25 typ. ISO method A 4 typ. 8 min. 0.249 0.102 2.54 typ. 1.27 typ. i178029_11 Lead coplanarity 0.004 max. 0.508 1.02 3 to 7 PACKAGE MARKING YWW Y 68 SFH6156-4 V X018 This is an example of the marking used on the SFH6156-4X018T. Document Number: 83671 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.3, 25-Oct-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000