D1U-W-1200-12-HC Series AC/DC Front End Power Supply SELECTION GUIDE Model Number Power Output High Line AC Power Output Low Line AC Main Output Standby Output Airflow 1200W 1200W 900W 900W 12V 12V 3.3V 5V Back to front Back to front D1U-W-1200-12-HC2C D1U-W-1200-12-HA2C INPUT CHARACTERISTICS Parameter FEATURES n RoHS compliant n 1200W (220Vac), 900W (110Vac) Output power n 12V Main output, 3.3V or 5V standby output n 1U sized; dimensions 12" x 4.75" x 1.6" n 13.2 Watts per cubic inch density n N+1 redundancy capable, including hot-docking n Active current sharing on main output Input Voltage Operating Range Input Frequency Turn-on Input Voltage Turn-off Input Voltage Maximum Input Current Inrush Current Output Voltage 12V 3.3Vsb 5Vsb n IC Bus Interface with status indicators n Optional 1U x 19" power-shelf DESCRIPTION The D1U-W-1200 is a 1200 Watt, powerfactor-corrected (PFC) front-end power supply for hot-swapping redundant systems. The main output is 12V and standby output of either 5V or 3.3V. Packaged in 1U low profile, it is designed to deliver reliable bulk power to servers, workstations, storage systems or any 12V distributed power architecture systems requiring high power density. The highly efficient electrical and thermal design with internal cooling fans supports reliable operation conditions. The D1U-W-1200 is designed to auto-recover from over-current and over-temperature faults. Status information is provided with front panel LEDs, logic signals and I2C management interface. Three units can be packaged into an optional 19" 1U power shelf to provide up to 3.6kW of power. www.cd4power.com MIN. Ramp up Ramp down 90 47 78.5 70.5 TYP. 55 MAX. Units 264 63 86.5 78 12 90 Vac Hz Vac Arms Apk OUTPUT VOLTAGE CHARACTERISTICS n Over-voltage, over-current, over-temperature protection n Internal cooling fans Conditions Parameter Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Output Current Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Operating Range Voltage Set Point Accuracy Line and Load Regulation Ripple Voltage & Noise Operating Range Conditions MIN. TYP. MAX. 12.12 11.75 12.48 120 98.3 20MHz Bandwidth 0 3.3 3.2 3.4 33 6 0 5 4.85 5.15 50 4 0 Units Vdc mV p-p A Vdc mV p-p A Vdc mV p-p A OUTPUT CHARACTERISTICS Parameter Remote Sense Efficiency Start-up Time Transient Response Current sharing accuracy (up to 3 in parallel) Hold-up Time Conditions MIN. TYP. MAX. 120 90.6 1.5 150 220Vac AC ramp up PS_On activated 12V Ramp 1A/ms 3.3Vsb Ramp 1A/ms 5Vsb Ramp 1A/ms At 100% load 20 Units mV % s ms 600 165 250 mV 10 % ms D1U-1200-12-HC.4 Page of 4 D1U-W-1200-12-HC Series AC/DC Front End Power Supply GENERAL CHARACTERISTICS Parameter Conditions MIN. Storage Temperature Range Operating Temperature Range Operating Humidity Storage Humidity Shock Sinusoidal Vibration Non-condensing -40 0 10 5 MTBF Safety Approvals Non-condensing TYP. MAX. 125 50 90 90 30G non operating 0.5G, 5 - 500 Hz Calculated per Bellcore at Ta=30C 200 Demonstrated 200 c-CSA-us (CSA 60950-1-03/UL 60950-1, First Edition) Units C % Khrs Khrs PROTECTION CHARACTERISTICS Output Voltage 12V 3.3Vsb 5Vsb Parameter Conditions MIN. Over-temperature Over Voltage Over Current Over Voltage Over Current Over Voltage Over Current Auto-restart Latching Latching Latching Latching Latching Latching 55 13 107 3.57 6.5 5.6 5 TYP. MAX. Units 65 14 122 4.02 8 6 7 C V A V A V A MAX. Units ISOLATION CHARACTERISTICS Parameter Insulation Safety Rating / Test Voltage Isolation Material Flammability Conditions Input to Output - Reinforced Input to Chassis - Basic Output to Chassis Output to Output UL 94V-0 MIN. TYP. 3000 1500 Vrms Vrms CONTROL SIGNALS Status Conditions Description LED Off Flashing Yellow Flashing Green Green No AC input to all PS Power Supply Failure Main Output Absent Power Supply Good Status PS-ON, PGOOD, ACOK, PS_BAD, FANFAIL, OT Warning & shutdown, AC Range Output Fault 12V Output 12V Fan1 Monitor Fan2 Monitor 12V OV, 12V UV, 12V OC, Vsb Fail, Fan1 Fail, Fan2 Fail 8 bit scaled output voltage 8 bit scaled output current 8 bit scaled output current 8 bit scaled output current I2C Registers www.cd4power.com D1U-1200-12-HC.4 Page of 4 D1U-W-1200-12-HC Series AC/DC Front End Power Supply EMISSIONS AND IMMUNITY Characteristic Description Harmonics Voltage Fluctuation and Flicker Emission Conducted Emission Radiated IEC/EN 61000-3-2 IEC/EN 61000-3-3 FCC 47 CFR Parts 15/CISPR 22/EN55022 FCC 47 CFR Parts 15/CISPR 22/EN55022 Criteria ESD IEC/EN 61000-4-2 Electromagnetic Field Electrical Fast Transients/Burst Surge RF Conducted Immunity Magnetic Immunity Voltage dips, interruptions IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 IEC/EN 61000-4-11 Class A, 6dB margin Class A, 6dB margin 4kV contact discharge 8kV operational air discharge 15kV non-operational air discharge 1kV/2kV, Performance Criteria B 3 Vac, 80% AM, 1kHz, Performance Criteria A 3 A/m OUTPUT CONNECTOR AND SIGNAL SPECIFICATION DC and Signal Connector: Tyco Part # 1-6450132-2, or FCI PowerBlade # 51732-021 P1 VOUT P2 VOUT P3 VRTN P4 VRTN P5 P6 VRTN VRTN P7 VOUT P8 x1 x2 x3 x4 x5 x6 AC_OK P_GOOD V_SB RETURN V_SB RETURN V_SB +OUT V_SB +OUT D SPARE SPARE V_SB RETURN V_SB RETURN V_SB +OUT V_SB +OUT C I_SHARE I2C ADR0 I2C ADR1 I2C ADR2 PS_KILL PS_ PRESENT B SENSE + SENSE - I2C DATA I2C CLOCK SPARE PS_ON A VOUT mate-last pins High Level Low Level I Max Main output voltage Main output voltage, return VOUT remote sense, positive node input VOUT remote sense, negative node input Standby voltage output Standby voltage, return Active load sharing bus 0 - 8V -4 mA / +5 mA AC_OK Input AC Voltage "OK" signal output(Internal 3K3 ohm pull-up to Vsb) >2.4V (active, OK) <0.4V -2 mA +4 mA D2 P_Good Power good signal output(Internal 3K3 ohm pull-up to Vsb) >2.4V (active, Good) <0.4V -2 mA +4 mA B5 B6 PS_Kill PS_Present Floating pin will turn off P/S. Internally tied to Vsb return Vsb 0V A6 PS_On Internal 1K ohm pull-up to Vsb, (accepts open collector/ drain drive) >2.1V (open, or Vsb) <0.7V (active, PS:On) A3 A4 B2 B3 B4 I C Data I2C Clock I2C Adr0 I2C Adr1 I2C Adr2 I C serial data bus I2C serial clock bus Address input 0, internal pull-up to Vsb Address input 1, internal pull-up to Vsb Address input 2, internal pull-up to Vsb Vsb Vsb >2.1V, < Vsb <0.8V >2.1V, <Vsb <0.8V >2.1V, <Vsb <0.8V Pin Assignment Signal Name Description P1, P2, P7, P8 P3, P4, P5, P6 A1 A2 C5, C6, D5, D6 C3, C4, D3, D4 B1 VOUT VRTN Sense + Sense V_SB V_SB Return I_Share D1 2 www.cd4power.com 2 0.5 mA -1 mA -4 mA 1 mA 1 mA 1 mA D1U-1200-12-HC.4 Page of 4 D1U-W-1200-12-HC Series AC/DC Front End Power Supply MECHANICAL DIMENSIONS 3&' AC Input Connector: The AC input connector is standard IEC320 C14 (15A). Dimensions: 12.00"L x 4.75" W x 1.6" H (40.7H x 120.6W x 304.90mm) D1U MATING CONNECTORS 12V D1U mating connector Press Fit Straight Solder 1 Right Angle Straight Right Angle C&D N/A N/A N/A N/A FCI 51742-10802400CALF 51762-10802400CBLF 51742-10802400AALF 51762-10802400ABLF Tyco TBD TBD TBD TBD 1 Solder connector recommended for board thickness of <0.090 C&D Technologies, Inc reserve the right to alter or improve the specification, internal design or manufacturing process at any time, without notice. Please check with your supplier or visit our website to ensure that you have the current and complete specification for your product before use. (c) C&D Technologies, Inc 2006 CPS_D1U-1200-12-HC.4 No part of this publication may be copied, transmitted or stored in a retrieval system or reproduced in any way including, but not limited to, photography, photocopy, magnetic or other recording means, without prior written permission from C&D Technologies, Inc. Instructions for use are available from www.cd4power.com www.cd4power.com C&D Technologies, Inc. C&D Technologies, Inc. 11 Cabot Boulevard, Mansfield, 4118 14th Avenue, Unit 4 Markham, Ontario L3R 0J3, Canada MA 02048-1151, USA Tel: +1 905 944 2850 Fax +1 905 944 2851 email: toronto@cdtechno.com Tel: +1 (508) 339-3000 Fax: +1 (800) 233-2765 email: sales@cdtechno.com D1U-1200-12-HC.4 Page of 4