LM160QML www.ti.com SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 LM160QML High Speed Differential Comparator Check for Samples: LM160QML FEATURES DESCRIPTION * * * * * * * * The LM160 is a very high speed differential input, complementary TTL output voltage comparator with improved characteristics over the A760/A760C, for which it is a pin-for-pin replacement. The device has been optimized for greater speed, input impedance and fan-out, and lower input offset voltage. Typically delay varies only 3nS for overdrive variations of 5mV to 400mV. 1 2 Ensured High Speed: 20nS max Tight Delay Matching on Both Outputs Complementary TTL Outputs High Input Impedance Low Speed Variation with Overdrive Variation Fan-Out of 4 Low Input Offset Voltage Series 74 TTL Compatible Complementary outputs having minimum skew are provided. Applications involve high speed analog to digital convertors and zero-crossing detectors in disk file systems. Connection Diagrams Figure 1. Metal Can Package See Package Number LMC0008C 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2010-2013, Texas Instruments Incorporated LM160QML SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 www.ti.com Schematic Diagram These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML LM160QML www.ti.com SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 Absolute Maximum Ratings (1) Positive Supply Voltage +8V -8V Negative Supply Voltage Peak Output Current 20 mA Differential Input Voltage 5V V VI V- + Input Voltage Operating Temperature Range -55C TA +125C Storage Temperature Range -65C TA +150C Thermal Resistance JA Still Air 165C/W 400 LF/min 67C/W JC 25C/W Lead Temperature (Soldering, 10 sec.) 260C ESD Tolerance (2) 1,600V (1) (2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Human body model, 1.5 k in series with 100 pF. Quality Conformance Inspection Mil-Std-883, Method 5005 - Group A Subgroup Description 1 Static tests at Temp (C) +25 2 Static tests at +125 3 Static tests at -55 4 Dynamic tests at +25 5 Dynamic tests at +125 6 Dynamic tests at -55 7 Functional tests at +25 8A Functional tests at +125 8B Functional tests at -55 9 Switching tests at +25 10 Switching tests at +125 11 Switching tests at -55 12 Settling time at +25 13 Settling time at +125 14 Settling time at -55 Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML 3 LM160QML SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 www.ti.com LM160H/883 Electrical Characteristics DC Parameters Symbol Parameter Conditions Notes Min Max Unit Subgroups VOH B Logical "1" Output Voltage VCC 4.5V, IO = -320A 2.4 V 1, 2, 3 VOH A Logical "1" Output Voltage VCC 4.5V, IO = -320A 2.4 V 1, 2, 3 VOLA Logical "0" Output Voltage VCC 4.5V, IO = 6.4mA 0.4 V 1, 2, 3 VOLB Logical "0" Output Voltage VCC = 4.5V, IO = 6.4mA 0.4 V 1, 2, 3 IIB Input Bias Current VCC = 5V, VIN = 5V 20 A 1, 2, 3 ICC+ Positive Supply Current VCC = 6.5V 32 mA 1, 2, 3 ICC- Negative Supply Current VCC = 6.5V -16 mA 1, 2, 3 IOS B Short Circuit Current VCC = 4.5V -15 -52 mA 1, 2, 3 IOS A Short Circuit Current VCC = 4.5V -15 -52 mA 1, 2, 3 VIO Input Offset Voltage VCC = 5V -5.0 5.0 mV 1, 2, 3 IIO Input Offset Current VCC = 5V -3.0 3.0 A 1, 2, 3 II (1) Unbalanced Input Current VCC = 5V, VIN(1) = 0, VIN (2) = 5V See (1) -1.0 mA 1, 2, 3 II (2) Unbalanced Input Current VCC = 5V, VIN (1) = 5V, VIN (2) = 0V See (1) -1.0 mA 1, 2, 3 VCC Supply Voltage See (1) 4.5 6.5 V 1, 2, 3 BVCC Supply Breakdown Voltage See (1) 8.0 V 1, 2, 3 VCM Common Mode Input Voltage Range (1) 4.0 V 1, 2, 3 VDiff Differential Input Voltage Range See (1) 5.0 V 1, 2, 3 Max Unit Subgroups (1) VCC = 6.5V See Parameter tested go-no-go, only. LM160H/883 Electrical Characteristics AC Parameters The following conditions apply, unless otherwise specified. Symbol Parameter VCC = 5V, = 10MHz (sinusoidal) Conditions Notes Min tResp Response Time VIN = 30mVP-P See (1) 25 nS 9 tResp Response Time VIN = 2 VP-P See (1) 20 nS 9 (1) 4 Bench test, use 70256644. Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML LM160QML www.ti.com SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 Typical Performance Characteristics Offset Voltage Input Current vs Ambient Temperature Figure 2. Figure 3. Input Characteristics Supply Current vs Ambient Temperature Figure 4. Figure 5. Propagation Delay vs Ambient Temperature Delay of Output 1 With Respect to Output 2 vs Ambient Temperature Figure 6. Figure 7. Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML 5 LM160QML SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 www.ti.com Typical Performance Characteristics (continued) Common-Mode Pulse Response Figure 8. 6 Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML LM160QML www.ti.com SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 AC Test Circuit VI=50 mV FANOUT=1 FANOUT=4 V+=+5V R=2.4K R=630 V-=-5V C=15 pF C=30 pF Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML 7 LM160QML SNOSAR0A - NOVEMBER 2010 - REVISED MARCH 2013 www.ti.com REVISION HISTORY Released Revision Section Changes 11/30/2010 A New Release, Corporate format 1 MDS data sheets converted into one Corp. data sheet format. The drift table was eliminated since it did not apply MNLM160-X Rev 0BL will be archived. 03/26/2013 A All Sections Changed layout of National Data Sheet to TI format 8 Submit Documentation Feedback Copyright (c) 2010-2013, Texas Instruments Incorporated Product Folder Links: LM160QML PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) (3) Top-Side Markings (4) 5962-8767401GA ACTIVE TO-99 LMC 8 20 TBD Call TI Call TI -55 to 125 LM160H/883 5962-8767401GA Q A CO 5962-8767401GA Q > T LM160H/883 ACTIVE TO-99 LMC 8 20 TBD Call TI Call TI -55 to 125 LM160H/883 5962-8767401GA Q A CO 5962-8767401GA Q > T (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated