Page 1 of 2
WIRE, ELECTRIC, RADIATION-CROSSLINKED, TIN-COATED COPPER,
LIGHTWEIGHT, GENERAL PURPOSE, 600 VOLT
TITLE
This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable.
44A0111
COLD
BEND
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
PART NUMBER
1/
44A0111-26-*
44A0111-24-*
44A0111-22-*
44A0111-20-*
44A0111-18-*
44A0111-16-*
44A0111-14-*
44A0111-12-*
44A0111-10-*
IMMERSION,
LIFE CYCLE AND
ACCELERATED AGING
.500
.500
.750
.750
1.00
1.00
1.50
2.00
2.50
.500
.500
.750
.750
1.00
1.00
1.50
2.00
2.50
COLD
BEND WRAP
.250
.250
.250
.250
.375
.375
.500
.500
.500
.250
.375
.375
.375
.500
.500
1.00
1.00
1.00
.500
.500
1.00
1.00
1.00
1.00
3.00
3.00
3.00
JACKET - RADIATION-CROSSLINKED
MODIFIED PVF
Thickness: .003 ± .001 in.
PRIMARY INSULATON - RADIATION-CROSSLINKED,
EXTRUDED POLYALKENE
CONDUCTOR - TIN-COATED COPPER
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
SPECIFICATION CONTROL DRAWING
2
05-20-03
Date Revision
TABLE II. PERFORMANCE DETAILS
BEND TESTING
WEIGHT
(lb) (± 3%)
MANDREL DIAMETER
(inch) (± 3%)
44A0111-26-*
44A0111-24-*
44A0111-22-*
44A0111-20-*
44A0111-18-*
44A0111-16-*
44A0111-14-*
44A0111-12-*
44A0111-10-*
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
MINIMUM MAXIMUM
41.3
26.2
16.2
9.88
6.23
4.81
3.06
2.02
1.26
.021
.026
.033
.041
.051
.058
.073
.090
.114
.018
.023
.029
.037
.046
.052
.065
.084
.106
26
24
22
20
18
16
14
12
10
1.4
2.0
3.0
4.5
6.8
8.6
13.2
20.2
31.1
.034 ± .002
.040 ± .002
.047 ± .002
.055 ± .002
.065 ± .002
.072 ± .003
.089 ± .004
.108 ± .004
.129 ± .004
TABLE I. CONSTRUCTION DETAILS
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
FINISHED WIRE
MAXIMUM
WEIGHT
(lbs/1000 ft.)
DIAMETER
(in.)
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft)
CONDUCTOR
STRANDING
(number x AWG)
WIRE
SIZE
(AWG)
PART NUMBER
1/
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS
IMPOSED BY THE PURCHASE ORDER.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
P
RR
RR
R
Wire & Cable
01 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
SCD Number
TEMPERATURE RATING: 150°C,
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
ACCELERATED AGING: 300 ± 2°C for 6 hours
Identification legibility, 225 ± 2°C for 6 hours
BLOCKING: 150 ± 2°C for 24 hours
COLOR: white preferred
FLAMMABILITY: 30 seconds (maximum); 3 in. (maximum);
no flaming of facial tissue
HUMIDITY RESISTANCE: Insulation Resistance,
5000 Megohms for 1000 ft. (minimum)
IDENTIFICATION, STRIPING, OR BAND DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
IMMERSION: Diameter increase 5% (maximum);
no cracking,no dielectric breakdown
INSULATION ELONGATION AND TENSILE STRENGTH:
Primary Insulation,
Tensile Strength, 2500 lbf/in² (minimum)
Elongation, 150% (minimum)
INSULATION FLAWS:
Primary Insulation,
Spark test, 1.5 kV (rms), at 60 Hz
High Frequency Spark Test: 4.2 kV (rms) at 3.0 kHz
Impulse Dielectric test, 6.0 kV (peak)
Finished Wire,
High Frequency Spark Test: 5.7 kV (rms) at 3.0 kHz
Impulse Dielectric test, 8.0 kV (peak)
INSULATION RESISTANCE: 5000 Megohms for 1000 ft. (minimum)
LIFE CYCLE: 200 ± 2°C for 168 hours
LOW TEMPERATURE-COLD BEND: -65 ± 2°C for 4 hours
SHRINKAGE: 300 ± 2°C, 0.125 in. (maximum) in 12 in.
SMOKE TEST: 200 ± 2°C. No visible smoke
SOLDERABILITY ( 95% minimum coverage ): per MIL-STD-202,
Method 208, except without steam-aging, Type RMA Flux
SURFACE RESISTANCE: 500 Megohms-in. (minimum), both readings
THERMAL SHOCK RESISTANCE: 150 ± 2°C, 0.060 in. (maximum)
VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL):
2500 volts (rms), 60 Hz, 5 minutes
WICKING: 2.25 in. (maximum)
PART NUMBER:
The "*" in the part numbers on page 1 shall be replaced by a color code
designator.
1/ Example: AWG 20, white: 44A0111-20-9
1/ See Footer section on page 1
SPECIFICATION CONTROL DRAWING 44A0111
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
Page 2 of 2
