SPECIFICATION
Supplier : Samsung electro-mechanics Samsung P/N : CL31F106ZPENNWE
Product : Multi-layer Ceramic Capacitor Descriptiont : CAP, 10㎌, -20+80%, 10V, Y5V, 1206
CL 31 F106 Z P E N N W E
① ②③ ④ ⑤ ⑥ ⑦⑧⑨⑩⑪
①Series Samsung Multi-layer Ceramic Capacitor
②Size 1206 (inch code) L: 3.2 ± 0.15 mm W: ± 0.15 mm
③Dielectric Y5V ⑧Inner electrode
④Capacitance 10 ㎌Termination
⑤Capacitance -20/+80 % Plating (Pb Free)
tolerance ⑨Product Normal
⑥Rated Voltage 10 V ⑩Special Product for Network application
⑦Thickness 1.1 ± 0.15 mm ⑪Packaging Embossed Type, 7" reel
A. Samsung Part Number
Sn 100%
Cu
Ni
1.6
B. Samsung Reliability Test and Judgement condition
Capacitance Within specified tolerance 1㎑±10% 1.0±0.2Vrms
Tan δ (DF) 0.125 max.
Insulation 10,000Mohm or 100Mohm㎌Rated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature Y5V
Characteristics (From -30℃ to 85℃, Capacitance change should be within -82~+22%)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±30% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to Capacitance change : within ±20% Solder pot : 270±5℃, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Performance Test condition
250%
Vibration Test Capacitance change : within ±20% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10㎐ to 55㎐ (return : 1min.)
2hours 3 direction (x, y, z)
Moisture Capacitance change : within ±30% With rated voltage
Resistance Tan δ : 0.16 max 40±2℃, 90~95%RH, 500+12/-0hrs
IR : 12.5㏁·㎌ or Over
High Temperature Capacitance change : within ±30% Wit
h
of the rated voltage
Resistance Tan δ : 0.16 max Max. operating temperature
IR : 25㏁·㎌ or Over
1000+48/-0hrs
Temperature Capacitance change : within ±20% 1 cycle condition
Cycling Tan δ, IR : initial spec. Min. operating temperature →25℃
→Max. operating temperature →25℃
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
Performance Test condition
150%
