MULTI-RANGE ANALOG TIMER S1DXM-A/M RoHS compliance Features * Multiple functions built in * Part No. consolidation (The lineup consists of 64 easy-tochoose models.) * Cadmium-free contacts used * Economically priced * Operation mode and time range switches are on front panel. (Operation mode switch on S1DXM-M series only.) Time selectable Mode selectable Product types S1DXM-A multi-range timer No MODE switch, Operation mode (fixed): Power ON-delay Operating voltage 12V DC 24V DC 24V AC *Note 100 to 120V AC 200 to 220V AC 220 to 240V AC *Note Time range 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr Timed-out 2 Form C Part No. S1DXM-A2C10M-DC12V S1DXM-A2C30M-DC12V S1DXM-A2C60M-DC12V S1DXM-A2C10H-DC12V S1DXM-A2C10M-DC24V S1DXM-A2C30M-DC24V S1DXM-A2C60M-DC24V S1DXM-A2C10H-DC24V S1DXM-A2C10M-AC24V S1DXM-A2C30M-AC24V S1DXM-A2C60M-AC24V S1DXM-A2C10H-AC24V S1DXM-A2C10M-AC120V S1DXM-A2C30M-AC120V S1DXM-A2C60M-AC120V S1DXM-A2C10H-AC120V S1DXM-A2C10M-AC220V S1DXM-A2C30M-AC220V S1DXM-A2C60M-AC220V S1DXM-A2C10H-AC220V S1DXM-A2C10M-AC240V S1DXM-A2C30M-AC240V S1DXM-A2C60M-AC240V S1DXM-A2C10H-AC240V Note: 48 V DC, 100 to 110 V DC, 24 V AC and 220 to 240 V AC types are made to order. Please inquire for details. A socket line holding clip (ADX28005) is not included with the product. Please purchase separately. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Timed-out 4 Form C Part No. S1DXM-A4C10M-DC12V S1DXM-A4C30M-DC12V S1DXM-A4C60M-DC12V S1DXM-A4C10H-DC12V S1DXM-A4C10M-DC24V S1DXM-A4C30M-DC24V S1DXM-A4C60M-DC24V S1DXM-A4C10H-DC24V S1DXM-A4C10M-AC24V S1DXM-A4C30M-AC24V S1DXM-A4C60M-AC24V S1DXM-A4C10H-AC24V S1DXM-A4C10M-AC120V S1DXM-A4C30M-AC120V S1DXM-A4C60M-AC120V S1DXM-A4C10H-AC120V S1DXM-A4C10M-AC220V S1DXM-A4C30M-AC220V S1DXM-A4C60M-AC220V S1DXM-A4C10H-AC220V S1DXM-A4C10M-AC240V S1DXM-A4C30M-AC240V S1DXM-A4C60M-AC240V S1DXM-A4C10H-AC240V IP40 Timers S1DXM-A/M S1DXM-A/M S1DXM-M multi-range timer With MODE switch, Operation mode (switchable): Power ON-delay, Power Flicker OFF start, Power Flicker ON start, Power One-shot Timers Operating voltage 12V DC 24V DC 24V AC *Note 100 to 120V AC 200 to 220V AC 220 to 240V AC *Note Time range 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr 0.05 s to 10 min 0.2 s to 30 min 0.5 s to 60 min 0.05 min to 10 hr Timed-out 2 Form C Part No. S1DXM-M2C10M-DC12V S1DXM-M2C30M-DC12V S1DXM-M2C60M-DC12V S1DXM-M2C10H-DC12V S1DXM-M2C10M-DC24V S1DXM-M2C30M-DC24V S1DXM-M2C60M-DC24V S1DXM-M2C10H-DC24V S1DXM-M2C10M-AC24V S1DXM-M2C30M-AC24V S1DXM-M2C60M-AC24V S1DXM-M2C10H-AC24V S1DXM-M2C10M-AC120V S1DXM-M2C30M-AC120V S1DXM-M2C60M-AC120V S1DXM-M2C10H-AC120V S1DXM-M2C10M-AC220V S1DXM-M2C30M-AC220V S1DXM-M2C60M-AC220V S1DXM-M2C10H-AC220V S1DXM-M2C10M-AC240V S1DXM-M2C30M-AC240V S1DXM-M2C60M-AC240V S1DXM-M2C10H-AC240V Timed-out 4 Form C Part No. S1DXM-M4C10M-DC12V S1DXM-M4C30M-DC12V S1DXM-M4C60M-DC12V S1DXM-M4C10H-DC12V S1DXM-M4C10M-DC24V S1DXM-M4C30M-DC24V S1DXM-M4C60M-DC24V S1DXM-M4C10H-DC24V S1DXM-M4C10M-AC24V S1DXM-M4C30M-AC24V S1DXM-M4C60M-AC24V S1DXM-M4C10H-AC24V S1DXM-M4C10M-AC120V S1DXM-M4C30M-AC120V S1DXM-M4C60M-AC120V S1DXM-M4C10H-AC120V S1DXM-M4C10M-AC220V S1DXM-M4C30M-AC220V S1DXM-M4C60M-AC220V S1DXM-M4C10H-AC220V S1DXM-M4C10M-AC240V S1DXM-M4C30M-AC240V S1DXM-M4C60M-AC240V S1DXM-M4C10H-AC240V Note: 48 V DC, 100 to 110 V DC, 24 V AC and 220 to 240 V AC types are made to order. Please inquire for details. A socket line holding clip (ADX28005) is not included with the product. Please purchase separately. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. S1DXM-A/M Specifications Item Rated operating voltage Rated frequency Rated power consumption Rating Specifications 100 to 120VAC 200 to 220VAC 220 to 240VAC 12VDC 24VDC 50/60Hz common -- Max. 3 VA Max. 3 VA Max. 3 VA Max. 3 VA Max. 2 W Max. 2 W (at 24 VAC) (at 100 VAC) (at 200 VAC) (at 220 VAC) (at 12 VDC) (at 24 VDC) Approx. 3mA Approx. 3mA Approx. 3mA Approx. 3mA Approx. 5mA Approx. 3mA Approx. 80mA Approx. 20mA Approx. 13mA Approx. 13mA Approx. 70mA Approx. 40mA Timed -out 2 Form C: 7A 250V AC (resistive load) Timed -out 4 Form C: 5A 250V AC (resistive load) S1DXM-A Power on delay operation fixed (Power display: ON/green; Operation display (when output is on): UP/orange) S1DXM-M 4 switchable operations: Power ON-delay/Power Flicker OFF start/Power Flicker ON start/Power One-shot (Power display: ON/green; Operation display (when output is on): UP/orange) During time delay After time delay Rated control capacity Operation mode Time accuracy*1 Contact Life Mechanical Operating time fluctuation & Power off time change error Voltage error Temperature error Setting error Contact arrangement Contact resistance (Initial value) Within 1%, (power off time change at the range of 0.1 s to 1 h), 1 s range: Max. 1% and 10 ms*2 Within 1% (at the operating voltage changes between -20 to +10%), 1 s range: Max. 1% and 10 ms*2 Within 5% (at 20C 68F ambient temp. at the range of -10 to +50C +14 to +122F) Within 10%, 1 s range: Max. 10% and 20 ms Timed-out 2 Form C, Timed-out 4 Form C Max. 100m (at 1A, 6V DC) Timed-out 2 Form C type: Silver alloy, Au plating Contact material Timed-out 4 Form C type: Silver alloy, Au plating Mechanical (constant) Min. 107 Electrical (constant) 2x105 (at rated control capacity) Functional 10 to 55Hz: 1 cycle/min single amplitude of 0.25mm (10min on 3 axes) Vibration resistance Destructive 10 to 55Hz: 1 cycle/min single amplitude of 0.375mm (1h on 3 axes) Functional Min. 98m/s2 (4 times on 3 axes) Shock resistance Destructive Min. 980m/s2 (5 times on 3 axes) Allowable operating voltage range 19.2 to 26.4 V DC 80 to 132 V AC 160 to 242 V AC 176 to 264 V AC 9.6 to 13.2 V DC 19.2 to 26.4 V DC Reset time Max. 0.1s Insulation resistance (Initial value) Electrical Breakdown voltage (Initial value) Operating conditions Temperature rise Ambient temperature Ambient humidity Air pressure Ripple factor Mass (Weight) Protective construction Between live and dead metal parts, between input and output, between contact sets, between contacts Min. 100 M (at 500 V DC megger) Between live and dead metal parts: 2,000 Vrms for 1 min Between input and output: 2,000 Vrms for 1 min Between contact sets: 2,000 Vrms for 1 min Between contacts: 1,000 Vrms for 1 min Max. 70C 158F -10 to 50C +14 to 122F 30 to 85% RH (non-condensing) 860 to 1060 hPa DC type only, transmission wave rectification (ripple factor: approx. 48%)*3 Approx. 45 g IEC standard: IP40 (IP50 when using ADX18008 protective cover) Notes: *1. Unspecified measuring conditions are rated operating voltage (in case of DC type, ripple rate of 5% or less), ambient temp. 20C 68F, and power off time 1 second. *2. Power one-shot 1 s range: +2% and 10 ms *3. When using with a transmission wave rectification, vibration resistance and shock resistance properties worsen compared to when using a stabilized power supply. Time range setting Type S1DXM-A S1DXM-M Time scale 10M type 30M type 60M type 10H type 10M type 30M type 60M type 10H type X1 X10 X1 X10 Time unit s s s m s s s m m m m h m m m h Min. scale 0.05 0.2 0.5 0.05 0.05 0.2 0.5 0.05 Max. scale 1 3 6 1 1 3 6 1 0.05 to 1s 0.2 to 3s 0.5 to 6s 0.05 to 1m 0.05 to 1s 0.2 to 3s 0.5 to 6s 0.05 to 1m Note: The time setting range is the combination of the time scale (X1 or X10) on the dial and the time unit (s, m, or h). Example: When dial reads 1, time scale is X1 and time units is seconds, then it is 1 second. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Setting range 0.5 to 10s 0.05 to 1m 2 to 30s 0.2 to 3m 5 to 60s 0.5 to 6m 0.5 to 10m 0.05 to 1h 0.5 to 10s 0.05 to 1m 2 to 30s 0.2 to 3m 5 to 60s 0.5 to 6m 0.5 to 10m 0.05 to 1h 0.5 to 10m 2 to 30m 5 to 60m 0.5 to 10h 0.5 to 10m 2 to 30m 5 to 60m 0.5 to 10h Timers 24VAC S1DXM-A/M Operation mode and Time range setting Timers Operation mode Operation mode switch Time range switch ON 1 Power ON-delay s (m) m (h) X1 X10 2 ON 1 The time setting can be switched among 4 ranges each for 4 types for an interval between 0.05 seconds and 10 hours. Power Flicker OFF start 2 Notes: 1. The product is factory shipped with all settings on the OFF side (left). 2. Do not operate the switches with a sharp-edged object such as a knife blade. 3. The power must be turned off when setting the time range or operation mode. Operating the switches with the power on is a cause of breakdown and malfunction. 4. Use a force of under 5 N to operate the DIP switches when setting the time range and operation mode. ON 1 Power Flicker ON start 2 ON 1 Power One-shot 2 Operation mode S1DXM-A multi-range timer Power ON-delay operation * When power is turned on, the output contact operates after the set time. The output contact remains on until the power is turned off. Time chart Power supply Timed-out contact (NO) ON OFF ON T OFF T: Setting time UP (operation) LED (orange) ON (power) LED (green) S1DXM-M multi-range timer Power ON-delay operation Power Flicker OFF start operation [MODE] switch 1: OFF, switch 2: OFF * When power is turned on, the output contact operates after the set time. The output contact remains on until the power is turned off. [MODE] switch 1: OFF, switch 2: ON * When the power is turned on, the output contacts repeatedly operate at the set time. The output contact begins from the off state. Time chart Time chart Power supply Timed-out contact (NO) ON Power supply OFF ON T Timed-out contact (NO) OFF T: Setting time UP (operation) LED ON OFF ON T T OFF ON (power) LED T T t t<T (orange) ON (power) LED (green) T T: Setting time UP (operation) LED (orange) T (green) Power Flicker ON start operation Power One-shot operation [MODE] switch 1: ON, switch 2: OFF * When power is turned on, the output contact operates repeatedly at the set time. The output contact outputs at the same time power turns on. [MODE] switch 1: ON, switch 2: ON When power is turned on, the output contact performs the on operation at the same time power turns on, only for the set time. Time chart Power supply Timed-out contact (NO) UP (operation) LED Time chart ON OFF ON Power supply T T T T T T t Timed-out contact (NO) OFF T: Setting time t<T UP (operation) LED (orange) ON (power) LED ON (power) LED ON OFF ON T OFF T: Setting time (orange) (green) (green) * When the power is repeatedly turned on and off, the UP (Operation) LED may light up briefly when power is applied. This is not a malfunction. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. S1DXM-A/M S1DXM-A S1DXM-M Operation mode switch Time range switch Power LED (green) * [RANGE] Time range switch (4 different time ranges can be switched.) Time range switch 10M type: 1 s/10 s/1 min/10 min 30M type: 3 s/30 s/3 min/30 min 60M type: 6 s/60 s/6 min/60 min 10H type: 1 min/10 min/1 hr/10 hr Operation LED (orange) Setting hand Setting dial * [MODE] Operation mode switch (4 different operation modes can be switched.) Control time scale Power ON-delay Power Flicker OFF start Power Flicker ON start Power One-shot Dimensions (mm inch) S1DXM-A The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac S1DXM-M CAD Data Tolerance: 0.5 .020 CAD Data S1DXM Operation mode switch ON 0 22.1 .870 ON (Power) LED (green) ON (Power) LED (green) 28.5 1.122 28.5 1.122 16.6 .654 Nameplate 22.1 .870 0 Time range switch MODE ON RANGE s m 1 X1 2 X10 ON UP UP (Operation) LED (orange) Time range switch RANGE s m X1 X10 UP UP (Operation) LED (orange) S1DXM Control time scale Control time scale Nameplate 57.9 52.7 2.280 2.075 16.6 .654 57.9 52.7 2.280 2.075 For 4 Form C type For 4 Form C type 6.4 .252 6.4 .252 Terminal layouts and Wiring diagram Timed-out 2 Form C type 13.35 .526 1 4 5 8 9 12 13 14 Operating voltage Timed-out 4 Form C type 4.45 .175 13.35 .526 5.1 .201 6.4 4.1 .252 .161 6.4 .252 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Operating voltage * For the DC operating type, terminal 14 is "+" and terminal 13 is "-". Note: Please also refer to "PRECAUTIONS IN USING S1DXM-A/M AND S1DX" on page 68. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Timers Part names S1DXM-A/M/S1DX COMMON OPTIONS S1DXM-A/M/S1DX COMMON OPTIONS Accessory (Unit: mm inch) * Mounting frame (for panel mounting type) Panel cutout dimensions +0.2 25.1 .988 30 1.181 25.2 0 0 .992+.008 31.5 1.240 3 .118 5 .197 0 31.6+0.2 0 1.244+.008 *Note 3 .118 33.5 1.319 ADX18002 (Titanium-gray) ADX18006 (Gray) ADX18007 (Black) * Protective cover 10.5 .413 Board thickness 1 to 3 mm Note: Make sure the holes area stays as right angles. 27.1 1.067 * Cap block * Cap for cap block 28.2 1.110 * Socket for cap block 29.4 1.157 36 1.417 2 .079 18.85 .742 30.0 1.181 34.6 1.362 7.65 .301 21.2 .835 21.2 .835 ADX18008 ADX18011 Terminal socket * HC2 slim DIN terminal socket 82.5 3.248 86.5 3.406 * HC2 DIN high terminal socket * HC4 DIN high terminal socket 82.5 3.248 86.5 3.406 HC2-SFD-S ADX18004 82.5 3.248 86.5 3.406 HC2-SFD-K HC4-SFD-K ADX18003 * HC4 socket * HJ2 terminal socket 58.1 2.287 * HJ4 terminal socket 86.0 3.386 88.0 3.465 10 .394 HC4-SS-K 86.0 3.386 88.0 3.465 HJ2-SFD/HJ2-SFD-S HJ4-SFD/HJ4-SFD-S Options Socket leaf holding clip ADX18001 Appearance Dimensions ADX18012 Appearance 4.5 .177 4.5 .177 63.1 2.484 (2 pieces per set) 61.6 2.425 (2 pieces per set) AD68002 Appearance Dimensions Dimensions 63.8 2.512 Socket line holding clip for S1DXM-A/M (Sold separately) 7.5 .295 52.6 2.071 (2 pieces per set) Type Terminal socket HC2-SFD-S*3 HC2-SFD-K*3 HC4-SFD-K*3 For HC2-SF-K HC relay HC4-HSF-K HC2-SS-K HC4-SS-K HJ2-SFD*3 For HJ2-SFD-S*3 HJ 3 relay HJ4-SFD* HJ4-SFD-S*3 Application ADX18001 ADX18012 AD68002 - - - - - - - - - - - - - - - - - - - - - - - - *2 *1 ADX28005 ADX18005 - - - - - - - - - - - Notes: The triangles indicate that removal will be slightly difficult when installed laterally in succession. *1. The socket line holding clip ADX18005 is enclosed in the S1DX timer. : Available, -: Not available *2. The socket line holding clip (ADX28005) is not included with the S1DXM-A/M timer. *3. For use where there is a lot of vibration and shock, please use a compliant socket leaf holding clip or socket line holding clip. 4.5 .177 ADX28005 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. S1DXM-A/M/S1DX COMMON OPTIONS HC relay terminal sockets Name/Model No. * Terminal socket, HC 2-pin Dimensions Oval hole: 2-4.2x5 .165x.197 12 .472 Terminal layout Mounting hole dimensions 2-M3.5 screw hole (or 4.20.1 dia. hole) 2-M.138 screw hole (or .165.004 dia. hole) Terminal screw M3 6.2 .244 1 17.5 .689 5 12 23 12 .472 .906 .472 9 13 40 1.575 40 1.575 For general rails 5 .197 30 1.181 15 .591 30 1.181 HC2-SF-K 4 8 12 14 Oval hole: 2-4.2x9 .165x.354 Terminal screw M3 22.5 28.6 .886 1.126 53.5 2.106 67 2.638 6.2 .244 30 1.181 HC4-HSF-K 1 Note) Only socket line holding clips can be used. (Socket leaf holding clip cannot be used.) * Slim DIN terminal socket, HC2 6 10 9 13 12.5 .492 22.5 .886 30 1.181 4 8 12 3 7 11 4 Terminal screw M3 Available Available Available Not available Available Not available Available Available 22.5 .886 53.5 2.106 67 2.638 15 0.6 .591 .024 13.5 0.2 .531 .008 2 5 8 .315 16 .630 27.8 1.094 Not available 30 1.181 5 .197 Screw hole size 9 .354 Available Panel hole dimensions for side-by-side mounting Note) Only socket line holding clips can be used. (Socket leaf holding clip cannot be used.) * High terminal socket, HC 1-, 2- and 4-pin Applicable timers S1DX(2c) S1DX(4c) S1DXM(2c) S1DXM(4c) 2-M3.5 screw hole (or 4.20.1 dia. hole) 2-M.138 screw hole (or .165.004 dia. hole) 30 5 1.181 .197 Panel hole dimensions for side-by-side mounting 14 1 20 0.6 .787 .024 8 9 .354 15 0.2 15 0.2 .591 .008 .591 .008 5 4.1 0.2 .161 .008 57 1 2.244 .039 67 1 2.638 .039 6.3 0.2 .248 .008 6.4 0.2 .252 .008 2 0.15 .079 .006 67 Screw hole: 2-M3.5 2.638 (or 4.20.1 hole) 570.5 2.244 .020 (or .165.004 hole) 35.4 0.5 1.394 .020 8 0.2 .008 .315 12 4.2 0.3 .165 .012 22 0.6 .866 .024 * DIN high terminal socket, HC2 260.6 1.024 .024 6.2 0.3 .244 .012 28.5 0.6 .024 For DIN rails HC2-SFD-K 14 1.122 22 .866 13 4 1 Terminal screw M3 13.350.2 .526 .008 4.10.2 .161 .008 6.30.2 .248 .008 6.40.2 .252.008 20.15 .079 .006 22 .866 2 .079 9 6 0.3 .236 .012 210.6 .827.024 8 5 10 .394 671 2.638.039 4.20.3 .165 .012 26 1.024 6 .236 12 9 14 13 26 1.024 67 2.638 33.5 1.319 300.6 1.181.024 * DIN high terminal socket, HC4 260.6 1.024 .024 13.350.2 .526 .008 4.450.2 .175.008 Terminal screw M3 210.6 .827.024 4 3 2 1 8 7 6 5 30 1.181 4 .157 30 1.181 Screw hole: 2-M3.5 (or 4.20.1 hole) (or .165.004 hole) 4.10.2 .161.008 6.30.2 .248 .008 6.40.2 .252.008 20.15 .079.006 Drilling size of panel holes for installing the terminal sockets parallel 671 2.638.039 4.20.3 .012 .165 HC4-SFD-K 6 .236 12 11 10 9 300.6 1.181.024 14 13 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Options HC2-SFD-S S1DXM-A/M/S1DX COMMON OPTIONS HJ relay terminal sockets Applicable timers Name/Model No. Dimensions * HJ2 terminal socket Terminal layout 30 1.181 16.5 .650 M3 .118 terminal screw 2-M4.2x5 .165x5 mounting holes 8 8 12 5 Available Not available Available Not available Available Available Available Available 9 590.3 2.323.012 30 1.181 16.5 .650 M3 .118 terminal screw 2-M4.2x5 .165x5 mounting holes 4 3.40.3 .134.012 4 1 8 12 14 13 60.3 .236.012 22 .866 HJ2-SFD 150.2 .591.008 9 4 .157 8 1 5 5 721 2.835.039 12 2-M3 .118 or M4 .157 or 4.5 .177 dia. hole 35.4 1.394 591 2.323.039 9 4 .157 14 13 * HJ4 terminal socket 30 1.181 16.5 .650 M3 .118 terminal screw 2-M4.2x5 .165x5 mounting holes 3 2 1 7 6 5 12 3.40.3 .134.012 8 721 2.835.039 591 2.323.039 9 14 13 60.3 .236.012 22 .866 8 1 35.4 1.394 14 13 HJ2-SFD-S S1DX(2c) S1DX(4c) S1DXM(2c) S1DXM(4c) 5 721 2.835.039 591 2.323.039 * HJ2 terminal socket (Finger protect type) 4 3.40.3 .134.012 4 1 Mounting hole dimensions 3 2 1 7 6 5 220.2 .866.008 35.40.5 1.394.020 12 11 10 9 12 11 10 9 4 14 13 Options 30 1.181 18 .709 M3 .118 terminal screw 2-M4.2x5 .165x5 mounting holes 8 4 14 13 60.3 .236.012 29 1.142 HJ4-SFD * HJ4 terminal socket (Finger protect type) Lot No. 3 2 1 7 6 5 590.3 2.323.012 3.40.3 .134.012 8 721 2.835.039 3 2 1 7 6 5 2-M3 .118 or M4 .157 or 4.5 .177 dia. hole 35.4 1.394 1 59 2.323.039 12 11 10 9 4 .157 4 14 13 HJ4-SFD-S 29 1.142 12 11 10 9 Lot No. 60.3 .236.012 4 14 13 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. S1DXM-A/M/S1DX COMMON OPTIONS Sockets Name/Model No. * Socket, HC 2-pin Dimensions Mounting hole dimensions * The difference between the HC2 and HC4 sockets is only the number of the pins. Their appearances and sizes are the same. * The thickness of applicable chassis plates ranges from 1.0 to 2.0 mm .039 to .079 inch. * To install the socket easily, insert the socket top surface into the drilled holes and press the two points on the fastening plate indicated by arrows as shown in the fig. below. 4.45 4.45 .175 .175 4.06 .160 1 2 3 4 5 6 7 8 9 10 11 12 13 14 29.4 1.157 25.2 .992 4.45 .175 6.35 .250 6.35 .250 1.27 .050 2.3 .091 HC2-SS-K 7.06 .278 Applicable timers S1DX(2c) S1DX(4c) S1DXM(2c) S1DXM(4c) Available Not available Available Available 25.5 1.004 16.55 .652 7.65 .301 21.2 .835 * Socket, HC 4-pin General tolerance: 0.5 .020 4.45 4.45 .175 .175 4.06 .160 1 2 3 4 5 6 7 8 9 10 11 12 13 14 29.4 1.157 25.2 .992 6.35 .250 6.35 .250 1.27 .050 2.3 .091 HC4-SS-K 4.45 .175 7.06 .278 25.5 1.004 25.8 1.016 21.6 .850 5.9 .232 The interval size between the sockets which are parallel installed. 16.55 .652 7.65 .301 21.2 .835 Dimensional tolerance of machining: 0.1 .004 Options * Sockets for PC board HC2-Socket for PC board: HC2-PS-K HC4-Socket for PC board: HC4-PS-K All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PRECAUTIONS IN USING S1DXM-A/M AND S1DX Reset periods After unscheduled operations have been completed, or if the timer operation power supply has been turned off at any time during operation, a reset period of at least 0.1 seconds should be allowed before resuming operation. External surge protection External surge protection may be required if the following values are exceeded. Otherwise, the internal circuit will be damaged. The typical surge absorption elements include a varistor, a capacitor, and a diode. If a surge absorption element is used, use an oscilloscope to see whether or not the foreign surge exceeding the specified value appears. Single-pole, full-wave voltage for surge waveform [(1.2 x 50) s] Surge voltage (%) Timers PRECAUTIONS IN USING S1DXM-A/M AND S1DX 100 90 Peak 50 30 0 0 1.2 50 Time (s) Operation voltage 100 to 120V AC, 200 to 220V AC 12V DC, 24V DC Surge voltage 4,000V 1,000V Since the main body cover and knob are made of polycarbonate resin, prevent contact with organic solvents such as methyl alcohol, benzine and thinner, or strong alkali materials such as ammonia and caustic soda. Terminal wiring Make sure that terminals are wired carefully and correctly, referring to the terminal layout and wiring diagrams. Particularly, since the DC type has polarity, do not operate it with reverse polarity. Assembly 1) When installing, use a terminal socket or socket intended for HC/HJ relay. For adjacent installations, be sure to first verify the installation conditions of the terminal sockets or sockets you will be using. 2) Use the separately-sold dedicated socket leaf holding clip to secure terminal sockets and sockets to the timer unit. The conditions of use for dedicated socket leaf holding clip will differ depending on the terminal socket or socket you will be using. Therefore, please test under actual conditions before putting into operation. 3) If terminals are to be soldered directly, please hand solder with a 30 to 60 W solder iron with a tip temperature of 300C for no more than 3 seconds. Automatic soldering should be avoided. 4) A flux-tight construction is not used with this timer, so be careful that flux or cleaning fluid does not get inside the case. 5) To assure that characteristics are maintained, do not remove the case. Long Continuous Current Flow Long continuous current flow through the timer cause generation of heat internally, which degrade the electronic parts. Use the timer in combination with a relay and avoid long continuous current flow through the timer. (Refer to the circuit diagram below when using a safety circuit for continuous operation.) R T R R Phase synchronization using AC load If the turning on of the timer output relay is synchronized to the AC power supply phase, there may be times when the service life is shortened because of electrical factors, or when a locking phenomenon (defective relay return) occurs because of contact point welding or a shift in the contact relay. Check the operation using the actual timer. Acquisition of CE marking Please abide by the conditions below when using in applications that comply with EN61812-1. 1) Overvoltage category II, pollution degree 2 (2 Form C type) Overvoltage category II, pollution degree 1 (4 Form C type) 2) The load connected to the output contact should have basic insulation. This timer is protected with basic insulation and can be double-insulated to meet EN/IEC requirements by using basic insulation on the load. 3) Please use a power supply that is protected by an overcurrent protection device which complies with the EN/IEC standard (example: 250 V 1 A fuse, etc.). 4) You must use a terminal socket or socket for the installation. Do not touch the terminals or other parts of the timer when it is powered. When installing or uninstalling, make sure that no voltage is being applied to any of the terminals. 5) Do not use this timer as a safety circuit. For example when using a timer in a heater circuit, etc., provide a protection circuit on the machine side. T Applicable standard Safety standard EN61812-1 (EMI)EN61000-6-4 Radiation interference electric field strength Noise terminal voltage (EMS)EN61000-6-2 Static discharge immunity RF electromagnetic field immunity EMC EFT/B immunity Surge immunity Conductivity noise immunity Power frequency magnetic field immunity Voltage dip/Instantaneous stop/Voltage fluctuation immunity Pollution Degree 2/Overvoltage Category II (2 Form C type) Pollution Degree 1/Overvoltage Category II (4 Form C type) EN55011 Group1 ClassA EN55011 Group1 ClassA EN61000-4-2 4 kV contact 8 kV air EN61000-4-3 10 V/m AM modulation (80 MHz to 1 GHz) 10 V/m pulse modulation (895 MHz to 905 MHz) EN61000-4-4 2 kV (power supply line) 1 kV (signal line) EN61000-4-5 1 kV (power supply line) EN61000-4-6 10 V/m AM modulation (0.15 MHz to 80 MHz) EN61000-4-8 30 A/m (50 Hz) EN61000-4-11 10 ms, 30% (rated voltage) 100 ms, 60% (rated voltage) 1,000 ms, 60% (rated voltage) 5,000 ms, 95% (rated voltage) All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Others 1) When setting the time, the dial should be kept within the range indicated on the dial face. The "0" marking on the dial indicates the minimum time during which the control time can be varied (it does not indicate 0 seconds). 2) Do not rotate the knob past the stopper. 3) Turn off the power before changing the DIP switch settings. Changing the DIP switch with the power on can cause breakdown. 4) When connecting the operating power supply, make sure that no leakage current enters the timer. For example, when performing contact protection, if set up like that of fig. A, leaking current will pass through C and R, enter the timer, and cause incorrect operation. The fig. B shows the correct setup. When a contact switch having an operation indicating lamp (lamp equipped limit switch, etc.) is used to apply power to the timer, a resistor having a value equal to or greater than the value below shall be connected in series with the lamp. 100 to 120V AC operating type: Min. 33k 200 to 220V AC operating type: Min. 82k Limit switch Example of limit switches with lamp. Resistor Neon lamp T Leakage current Operating power supply R T C WRONG (Fig. A) R Operating power supply T C (Fig. B) CORRECT All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Timers PRECAUTIONS IN USING S1DXM-A/M AND S1DX