KBP005M/3N246 - KBP10M/3N252
KBP005M/3N246-KBP10M/3N252, Rev. A2
KBP005M/3N246 - KBP10M/3N252
1.5 Ampere Bridge Rectifiers
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm).
Electrical Characteristics TA = 25°C unless otherwise noted
2001 Fairchild Semiconductor Corporation
Features
•Surge overload rating: 50 amperes
peak.
•Reliable low cost construction utilizing
molded plastic technique.
•UL certified, UL #E111753.
Symbol
Parameter
Device
Units
005M 01M 02M 04M 06M 08M 10M
246 247 248 249 250 251 252
VRRM Maximum Repet i tive Reverse Voltage 50 100 200 400 600 800 1000 V
VRMS Maximum RMS B ri dge Input V ol t age 35 70 140 280 420 560 700 V
VR DC Reverse Voltage (Rated V R) 50 100 200 400 600 800 1000 V
IRM Maximum I nstantaneous Reverse Leakage,
total bridge @ rated VR TA = 25°C
T
A = 100°C
5.0
500
µA
µA
VFM Maximum Instantaneous Forward Voltage
Drop, per bridge @ 1.0 A
@ 3.14 A
1.0
1.3
V
V
I
2t rating f or fusing t < 8.35 ms 10 A2s
C Typical Junction Cap acitance, per leg
V
R = 4.0 V, f = 1.0 MHz 15 pF
Symbol
Parameter
Value
Units
IF(AV) Average Rectifi ed Current
@ TA = 50°C 1.5 A
IFSM Non-repetitive Peak Forward Surge Current 50 A
PD Total Device Dissipation
Derate above 25°C 3.5
25 W
mW/°C
RθJA Thermal Res i stance, Junction to A mbient, ** per l eg 40 °C/W
Tstg Storage Temperature Range -55 to +165 °C
TJ Operating Junction Temperature -55 to +165 °C
KBPM
+~~-
KBP005M/3N246 - KBP10M/3N252
KBP005M/3N246-KBP10M/3N252, Rev. A2
Bridge Rectifiers
(continued)
Typical Characteristics
Non -Repetit ive Su rge Cu rre nt
12 51020 50100
0
10
20
30
40
50
N UMBE R OF CYCL E S AT 6 0Hz
FORWARD SURGE CURRENT (A)
Reverse Charact eri stics
0 20406080100120140
0.1
1
10
100
NO RMALIZED RE V ERSE VOLTAGE (%)
REVERSE CURRENT ( A)
µ
µ µ
µ
T = 2 5 C
º
A
Forward Charac t eristi cs
0 0.2 0.4 0.6 0.8 1 1.2 1.4
0.01
0.1
1
5
FOR WAR D VO LT A GE (V)
FOR WAR D CU RRENT (A)
MEDIAN
TYPICAL
DISTRIBUTION
Outp ut Curr en t vs.
Am bie nt Tem perat ure
0 50 100 150
0
0.5
1
1.5
2
AM BI ENT TEMP ERATURE ( C)
O UTPUT CU RRENT (A )
º
KBPM (FS PKG Code R1)
KBPM Package Dimensions
August 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 1.7
0.46 0 (11.7)
0.42 0 (10.7)
0.600 (15.2)
0.560 (14.3)
0.600 Min
(15.2)
0.50 0 (12.7)
0.46 0 (11.7)
0.50 0 Min
(12.7)
0.160 (4.1)
0.140 (3.6)
0.034 (8.6)
0.028 (7.6)
0.060 Ty p
(1.52)
0.125 X 45
O
(3.2) Typ
+~~ _
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN T O IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART ST ART™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™
