DIGITAL FIBER SENSOR For leak / liquid fibers only Easy operation even for beginners Optimum settings can be realized with simple operations. Digital display Operation indicator Model indicator MODE indicators Use Only with Leak or Liquid Fiber FX-301-F is designed for use with only leak fiber, FD-F7 series or liquid fiber, FT-F9 series. You can set the optimum conditions with simple operations. Leak fiber, fiber FD-F7 series FX-301-F Large jog switch Large MODE key Easy to Operate with Individual / Collective Teaching Mode Individual teaching mode (TEACH) After you select FD-F7 series or FT-F9 series by the jog switch, the optimum threshold level is automatically set by just pressing the jog switch. Collective teaching mode (ALL) You can set the optimum sensitivity for all cascaded units in one step by the optical communications function. Further, since the settings are also copied to all the units, cumbersome setting operation is considerably reduced. Liquid fiber, fiber FT-F9 series Quick-connection cable is optional. Flashing Function Incorporated When the leak fiber is connected (F7 mode), if a leak is detected, you will recognize which fiber detects the leak at one sight because the emitter will start flashing. Long Life and No Adjustment Required with a Newly Developed LED The new `LED using four chemical elements' used in FX-301-F minimizes light deterioration with time and enables stable detection for a very long period. Communication direction Collective teaching mode is possible for 16 units max. SPECIFICATIONS Type Model No. NPN output FX-301-F PNP output FX-301P-F NPN output D (Brown) V (Note 1) NPN open-collector transistor PNP open-collector transistor * Maximum sink current: 100mA (Note 1) * Maximum source current: 100mA (Note 1) * Applied voltage: 30V DC or less * Applied voltage: 30V DC or less Output (between output and 0V) (between output and V) * Residual voltage: 1.5V or less * Residual voltage: 1.5V or less [at 100mA (Note 1) sink current] [at 100mA (Note 1) source current] Leak setting (F7 mode): OFF with detection of leak Output operation Liquid setting (F9 mode): Using the jog switch, choose the signal OFF condition between absence of liquid and presence of liquid. Short-circuit protection Incorporated Response time 250!s or less (Note 2) Individual / collective teaching Sensitivity setting Color code of quick-connection cable Sensor circuit Normal operation: 960mW or less (Current consumption 40mA or less at 24V supply voltage) Power consumption ECO mode: 600mW or less (Current consumption 25mA or less at 24V supply voltage) (Black) Output Tr ZD Internal circuit Load 12 to 24V DC 10% 100mA max. (Note 2) (Blue) 0V (Note 1) Users' circuit Notes: 1) The quick-connection sub cable does not have V (brown) and 0V (blue). 2) 50mA max., if five amplifiers, or more, are connected in cascade. 3) Never connect several amplifiers in series (AND). Symbols ...D: Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr: NPN output transistor Orange LED (lights up when the output is ON) Operation indicator FX-301P-F Green LED [lights up during liquid setting (F9 mode)] Model indicator Fine sensitivity adjustment function PNP output Incorporated Timer function Delay timer [used only for liquid setting (F9 mode)] (Timer setting selectable from 10ms, 100ms, 1,000ms, and none) Ambient temperature 0 to 50C (If 8 to 16 units are connected in cascade: 0 to 45C) (No dew condensation), Storage: 20 to 70C Emitting element Red LED (modulated) Material Enclosure: Heat-resistant ABS, Case cover: Polycarbonate Cable extension Extension up to total 100m is possible with 0.3mm2, or more, cable. 20g approx. Weight FX-301-F 12 to 24V DC10% Ripple P-P 10% or less Supply voltage Notes: 1) 50mA, if five, or more, amplifiers are connected in cascade. 2) When detecting leak (output OFF) during leak setting (F7 mode), since the sensor flashes the emitted light,only the response action for turning the signal back to ON is delayed (1 sec. approx.). 3) Please refer to FX-301 catalog or FIBER SENSOR GUIDE BOOK for the options. Color code of quick-connection cable (Brown) V (Note 1) Sensor circuit Item I/O CIRCUIT DIAGRAMS ZD Tr 100mA max. (Note 2) (Black) Output Load (Blue) 0V (Note 1) D Internal circuit 12 to 24V DC 10% Users' circuit Notes: 1) The quick-connection sub cable does not have V (brown) and 0V (blue). 2) 50mA max., if five amplifiers, or more, are connected in cascade. 3) Never connect several amplifiers in series (AND). Symbols ...D: Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr: PNP output transistor DIMENSIONS (Unit: mm) PRECAUTIONS FOR PROPER USE 48.2 8.3 12 26.3 2.5 0.7 Operation indicator (Orange) MODE key Jog switch Model indicator (Green) Digital display (Red) 3 Communication window 10 Beamemitting part 64.5 5MODE key 3 7 10.5 7 13.5 4Jog switch 27.8 7 3 Functional description 1Operation indicator (Orange) 2Model indicator (Green) 3MODE indicators 30.5 Beamreceiving part This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. 36.5 3.95 Suitable for 35mm width DIN rail 1Operation indicator (Orange) *** Lights up when the output is ON. 2Model indicator (Green) *** Lights up during liquid setting (F9 mode). 3MODE indicator *** RUN (Green): Lights up during normal sensing operation. TEACH (Yellow): Lights up when the individual teaching mode is selected. ALL (Yellow): Lights up when the collective teaching mode is selected. ADJ (Yellow): Lights up when the threshold value fine adjustment mode is selected or the sensitivity switching function is activated. DISP (Yellow): Lights up when the digital display setting mode is selected or the timer function is activated. OUT (Yellow): Lights up when the forced output mode is selected or the NO/NC switching function is activated. 4Jog switch *** Moving this switch in the `' or `' direction, allows different items to be viewed for selection and pressing the switch then confirms the selected setting. 5MODE key *** This key is used to select operating modes and to cancel settings during the configuration process. All information is subject to change without prior notice. SUNX Limited 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Phone: +81-(0)568-33-7211 FAX: +81-(0)568-33-2631 Overseas Sales Dept. http://www.sunx.co.jp/ Phone: +81-(0)568-33-7861 FAX: +81-(0)568-33-8591 Printed on 100% recycled paper PRINTED IN JAPAN No. LCE-FX301F-5 September, 2001