RGP30A - RGP30M FAST SWITCHING RECTIFIERS
PRV : 50 - 1000 Volts
Io : 3.0 Ampere
FEATURES :
* High forward surge capability
* High reliability
* Low leakage current
* Fast switching for high efficiency
* Pb / RoHS Free
MECHANICAL DATA :
* Case : DO-201AD Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 1.21 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specifie.
RGP RGP RGP RGP RGP RGP RGP
30A 30B 30D 30G 30J 30K 30M
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Current
0.375"(9.5mm) Lead Length at Ta = 55 °C
Peak Forward Surge Current, 8.3ms Single half sine wave
Superimposed on rated load
Maximum Instantaneous Forward Voltage at I
F = 3.0 A VFV
Maximum DC Reverse Current Ta
= 25 °CIRμA
at Rated DC Blocking Voltage Ta
= 150 °CIR(H) μA
Maximum Reverse Recovery Time ( Note 1 ) Trr 250 500 ns
Typical Junction Capacitance ( Note 2 ) CJpF
Typical Thermal Resistance ( Note 3 ) RӨJA °C/W
Operating Junction and Storage Temperature Range TJ, TSTG °C
Notes :
( 1 ) Reverse Recovery Test Conditions : I
F = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 V
DC
( 3 ) Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted.
Page 1 of 2 Rev. 01 : December 19, 2005
UNIT
A
A
1.3
IF(AV)
IFSM 125
3.0
RATING SYMBOL
20
- 65 to + 175
150
5.0
100
60
DO - 201AD
Dimensions in inches and ( millimeters )
0.21 (5.33)
0.19 (4.83)
0.375 (9.53)
0.285 (7.24)
0.052 (1.32)
0.048 (1.22)
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
FIG.1- FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 10 100
AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS
Page 2 of 2 Rev. 01 : December 19, 2005
RATING AND CHARACTERISTIC CURVES ( RGP30A - RGP30M )
0.375" (9.5mm) LEAD LENGTHS
10
1.0
0
0.1
10
80
0.01 0.01
1.0
0.1
1000 20 40 60
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD OUTPUT
CURRENT, (A)
INSTANTANEOUS FORWARD
CURRENT, (A)
INSTANTANEOUS REVERSE
LEAKAGE CURRENT, (µA)
TJ = 25 °C
TJ = 25 °C
Pulse Width = 300 μs
2% Duty Cycle
8.3 ms SINGLE HALF SINE-WAVE
TJ = TJ max.
RESISTIVE OR INDUCTIVE LOAD
1.0
2.0
3.0
4.0 200
100
10
20
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
INSTANTANEOUS FORWARD VOLTAGE, (V)
TJ = 125 °C
