3
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pleated Foil Shielded Cable
.050" 28 AWG Stranded, TPE Primary, PVC Jacket 90104 Series
• Can be used with IDC mass termination connectors
• Can be used in applications requiring standard
impedance of 100 Ω balanced (differential)
• CL2 rated, rugged design and high reliability for
peripheral applications
• Solid pleated copper foil provides exibility and 35
db average shielding effectiveness
• See Regulatory Information Appendix (RIA) for
chemical compliance information
(RIA E1 & C1 apply)
Date Modied: September 3, 2013 TS-0288-D
Sheet 1 of 2
Physical
Jacket Material: Polyvinyl Chloride (PVC) Color: Gray
Primary Material: Thermoplastic Elastomer (TPE) Color: Natural
Marking:
Standard: (UL) CL2 75C 28 AWG 3M NU C AWM IIA/B 80C 150V FT1 EU <50V
Conductors: 28 AWG, 7 × 36 AWG [ 7 × Ø 0.127 ] Tinned Stranded Copper
Shielding: Solid, Pleated, Copper Foil
Electrical
Voltage Rating: USA: N.E.C. 725, CL2 Canada: 150V EU: <50V
Insulation Resistance: (Primary Cable) > 1 × 1010 Ω/10 ft. [ 3 m ]
Characteristic Impedance: Unbalanced Balanced
53 Ω 110 Ω
Capacitance: 28.1 pF/ft [ 92.2 pF/m ] 13.4 pF/ft [ 44.0 pF/m ]
Inductance: 0.08 μH/ft [ 0.26 μH/m ] 0.16 μH/ft [ 0.52 μH/m ]
Propagation Delay: 1.49 ns/ft [ 4.89 ns/m ] 1.48 ns/ft [ 4.86 ns/m ]
Velocity of Propagation: 68% 69%
Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating.
Environmental
Temperature Rating: USA: CL2: 75°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
UL File No.: E118773, Power Limited Circuit Cable: CL2
3
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pleated Foil Shielded Cable
.050" 28 AWG Stranded, TPE Primary, PVC Jacket 90104 Series
TS-0288-D
Sheet 2 of 2
Ordering Information
90104/XX XX
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.05 ±.010
[ ] Dimensions for Reference Only
Note: Available in standard 100 ft rolls. Contact 3M for availability of
additional conductor counts and/or custom roll lengths.
Number of Conductors
(See Table)
Blank = Standard
SF = Splice Free
Number of
Conductors 3M Part Number Dimension A Dimension B
15 90104/15 86 [ 21.8 ] 0.700 ± .007 [ 17.78 ]
20 90104/20 1.11 [ 28.2 ] 0.950 ± .011 [ 24.13 ]
25 90104/25 1.34 [ 34.0 ] 1.200 ± .011 [ 30.48 ]
26 90104/26 1.40 [ 35.6 ] 1.250 ± .011 [ 31.75 ]
30 90104/30 1.60 [ 40.6 ] 1.450 ± .011 [ 36.83 ]
34 90104/34 1.80 [ 45.7 ] 1.650 ± .015 [ 41.91 ]
36 90104/36 1.90 [ 48.3 ] 1.750 ± .015 [ 44.45 ]
37 90104/37 1.95 [ 49.5 ] 1.800 ± .015 [ 45.72 ]
40 90104/40 2.10 [ 53.4 ] 1.950 ± .015 [ 49.53 ]
50 90104/50 2.60 [ 66.0 ] 2.450 ± .015 [ 62.23 ]
60 90104/60 3.10 [ 78.7 ] 2.950 ± .015 [ 74.93 ]
64 90104/64 3.32 [ 84.3 ] 3.150 ± .015 [ 80.01 ]
Note: Blue marking on one edge of primary cable designates wire #1.
A
B
.11 ± .03
[ 2.8 ]
.050 ± .002 Typ
[ 1.27 ]
Paper (Mfgr. Option)
28 AWG 7 X 36 AWG
[ 7 X ø 0.127 ] Tinned
Stranded Copper
Conductors
.005 [ 0.13 ] Pleated Foil Shield
with Adhesive Backing Using
Solid Copper Foil .001 [ 0.03 ] Thick
TPE Primary
Insulation
.026 [ 0.66 ] Min
PVC Jacket
Blank = Standard
C = Canadian Certified Version
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2012. All rights reserved.
RIA-2217B-F
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com 3M is a trademark of 3M Company.
