SATA HDD Interface Data & Power Protection Solution Products MF-MSMF075/24-2 Objective Compliance SATA Hard Disk Drives are typically powered from 5 VDC. The power line needs transient, inrush and reverse polarity protection. There are also data lines susceptible to damage from ESD events when the drive is not connected. IEC 61000-4-2 ESD Level 4, 8 kV Solution Benefit 1 Multifuse(R) PPTC Resettable Fuse: MF-MSMF075/24-2 1 TVS Diode: SMBJ5.0A 1 TVS Diode Array: CDDFN10-0524P This solution provides surge, inrush and reverse polarity protection on the power line and ESD protection on the data lines. Alternate Recommendations HDD powered from 12 VDC would instead use a model SMBJ12A TVS Diode on the power line. SMBJ5.0A MF-MSMF075/24 VDD RX+ RXCDDFN10-0524P SATA / e-SATA Connector TX+ TX- Design Kit SMBJ5.0A HDD Device CDDFN10-0524P The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. PN-DESIGNKIT-28 Americas: Europe: Tel +41-(0)41 768 55 55 Fax +41-(0)41 768 55 10 Asia-Pacific: Tel +1-951 781-5500 Fax +1-951 781-5700 Bourns(R) PortNote(R) solutions provide protection recommendations for typical port threats. Tel +886-2 256 241 17 Fax +886-2 256 241 16 For more information, go to: COPYRIGHT(c) 2012 * BOURNS, INC. * 6/12 * e/CPK1109 * "PortNote" is a registered service mark of Bourns, Inc. "Bourns" and "Multifuse" are registered trademarks of Bourns, Inc. in the U.S. and other countries. www.bourns.com or email: protection@bourns.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: PN-DESIGNKIT-28