303 3 2
Esp e r anza , Ra n c h o San t a M a r g a r i t a , Calif o r ni a
926 8 8
t e l 949-546-800 0 | f a x 949-546-80 0 1 | w w w . a b r a c on.c o m
Revised: 08.09.11
Visit
www.abracon.com
for Terms & Conditions of Sale
CERTIFIED
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
||||| | | | | | | | | | |
Pb
RoHS
Compliant
3.2 x 2.5 x 0.85 mm
Life S iz e
APPLICATIONS:
FEATURES:
STANDARD SPECIFICATIONS:
Low Jitter
MEMS
Technology!
.
• Consumer Electronics
• Storage Area Networks
• SATA, SAS, Fibre Channel
• Passive Optical Networks
• EPON, 10G-EPON, GPON, 10G-PON
• Ethernet
• 1G, 10GBASE-T/KR/LR/SR, and FCoE
• HD/SD/SDI Video & Surveillance
• PCI Express
• Ultra Miniature Pure Silicon
• Pin Configurable LVDS Dual output
• Low Jitter (Period Jitter RMS 3ps typical)
• Low Integrated Phase Jitter 2ps max
• Tight Stability +/-10ppm -40 to +85C
• Excellent Shock & Vibration Immunity
TM Clock Oscillator
Low Jitter
Pin Configurable
LVDS Dual Output
3G MEMS
ULTRA MINIATURE PURE SILICON
TM
CLOCK OSCILLATOR
ASEMDLV
LOW JITTER PIN CONFIGURABLE DUAL LVDS OUTPUT
ASEMDLV
Ordering Info Freq
(MHz)
Freq Select Bits [FS2, FS1, FS0] – Default is [111]
000 001 010 011 100 101 110 111
Frequency
Configuration 1
fOUT1 106.25 100 125 156.25 156.25 156.25 125 400
fOUT2 25 100 125 156.25 25 125 25 200
Custom
Configuration
fOUT1 Contact Abracon for customized configurations
fOUT2
Frequency select bits [FS2, FS1, FS0] are weakly tied high so if left floated, the default setting will be [111] and the device
will output the associated frequency highlighted in Bold. If other frequency combinations are required, please contact
Abracon for customized configuration. Please see the configurable frequency range in the section 2.0
Configurable frequency range 10 ----- 460 MHz Commercial,
Industrial temp range
Overall Frequency Stability
*1
Tri-state Function (Standby/Disable)
"1" (VIH≥0.75*Vdd) or Open: Oscillation
"0" (VIL<0.25*Vdd) : Hi Z
V
40kΩ pull-up resistor
embedded
Output Logic Level
V RL=50 Ω
Peak to Peak Output Swing
RL=50 Ω, CL=2pF
Pre-programmed Output Frequency Configuration
Key Electrical Specifications
*1. Frequency stability includes frequency variations due to initial tolerance, temp. and power supply voltage
Moisture Sensitivity Level – MSL 1