API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC1
from performance to board
space, to cost, we offer many
reasons and options for
managing EMI @ the signal
& power I/O
■
Low ground impedance – Full ground
plate and metallic shell provide minimal
impedance and superior performance
compared to on-board filter with
high impedance
■
Eliminate re-radiation – Filtered
connector at interface leaves no path
for bypassing the filter
■
Ground plane shielding – API’s filtered
connector ground planes shield the box
even at the connector port
■
Efficient space utilization – Filters
located in the connectors provide additional
space on PCB board
■
Consistent performance – Filtered
connectors provide more consistent
pin to pin performance
■
Fewer components – Filtered
connectors reduce component count
creating cost savings
■
Reliability – API tests 100% of filters,
on-board filters are usually spot tested
Advantages of a Filtered Connector
EMI Filtered Connectors
Series 700 High Performance
Connectors feature feed-
through capacitive and Pi filters
for the most effective filtering…
FC16-FC37
Series 600 Hi-Density Filtered
Connectors meet the growing
need for increased circuit
densities in smaller
packages… FC12-FC13
Series 500 Low-Profile Feed-Through
Connectors deliver reliable EMI
filtering in 90° PCB and straight
PCB connectors… FC8-FC11
Filtered Combo D-Sub
Connectors use tubular capacitors
for high insertion loss in signal,
power and coaxial contacts…
FC38-FC48
Datacom Connectors including
modular jack, miniature ribbon and
mini-DIN protect critical datacom
lines… FC54-FC57
Performance Specifications &
Board/Panel Cutouts… FC62-FC64
Hooded Strain Reliefs for shock
protection from exposed wires and
short circuits… FC60
Micro D Series Connectors
allow designers to incorporate
EMI filtering into even smaller
packages… FC49-FC53
Series F Ferrite Filtered Connectors
offer a low cost, space saving solution for
high frequency interference… FC3-FC7
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Advantages of API
Filtered Connectors
FC2
API Technologies’ Spectrum Control brand offers the
industry’s most complete line of filtered D-subminiature
connectors. Our connectors are available in shell sizes
from 9 to 50, and come in many termination types, such as
PC mount, wire wrap, solder cup and 90° PCB. In addition,
API offers a wide range of filtering options, allowing you to
find the right balance between performance and economy.
EMI filter options include our Pi filter configuration,
which provides 45-60 dB per decade slope to insertion loss
curve, our capacitive-only C filters that provide cost-effective
EMI attenuation, ferrite filtered series F connectors (designed
for filtering in situations that do not tolerate capacitive loading
of circuit), as well as our series 500 connectors, with small
.318" footprints.
The construction of our high performance Series 600
and 700 connectors features a one-piece zinc diecast shell,
which is subsequently nickel-plated. Each filter is constructed
with 360° grounding with ground plate, and our patented
coaxial springs ensure ground continuity. And with API’s
advanced in-house ceramic tube design, you’ll get a
reliable, high performance filter from start to finish.
Advantages of an API Filtered Connector
■
Low ground impedance – Full ground plate and
metallic shell provide minimal impedance and superior
performance compared to on-board filter with high
impedance
■
Eliminate re-radiation – Filtered connector at
interface leaves no path for bypassing the filter
■
Ground plane shielding – API filtered connector ground
planes shield the box even at the connector port
■
Efficient space utilization – Filters located in
connector provides additional space on PCB board
■
Consistent performance – Filtered connectors
provide more consistent pin to pin performance
■
Fewer components – Filtered connectors reduce
component count creating cost savings
■
Reliability – API tests 100% of filters, on-board filters
are usually spot tested
D-Subminiature Connectors
On-Board Filters
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Series F Ferrite Filtered
Connectors
FC3
The Series F filtered D-subminiature connectors
incorporate a solid slab of ferrite material as the filtering
element. This rugged one-piece design provides a
com-pact connector that is a drop-in replacement for
standard connectors. The ferrite material has been
chosen for optimum filtering performance in the 10
to 300 MHz range.
Series F Applications
■
Personal computers, microcomputer-applied products
and peripheral/terminal equipment
■
Eliminates common-mode noise along data lines in
data communication terminals and digital equipment
Features
■
Low cost, high performance ferrite filter
■
No distortion of wave forms
■
Replaces individual ferrite bead filters, saving cost
and space
■
Provides both pin to ground and pin to pin filtering
■
Effective in helping meet requirements of FCC, VDE,
EN55022 and Japan’s VCCI
■
Short, space saving .318" footprint
■
Interchangeable with standard
D-subminiature connectors
■
Can be installed directly over PCB trace pattern
with no shorting
■
4–40 UNC locking insert eliminates loose hardware
■
Metal shielding front shell
■
Gold plated contacts
■
RoHS compliant versions available
(replace 56- with 56F)
Mechanical Specifications
Front Shell. . . . . . . . Steel (Tin plated)
Housing . . . . . . . . . UL 94V-0 Rated thermoplastic, black
Contacts . . . . . . . . . Phosphor bronze (sockets)
. . . . . . . . . . . . . . . . or brass (pins)
Contact
Plating . . . . . . . . . . Gold Flash (<10µ in.) over nickel
Operating
Temperature. . . . . . . –40°C to +105°C
Electrical Specifications
Frequency
Range . . . . . . . . . . . 10 – 300 MHz
Current
Rating. . . . . . . . . . . 5 Amps
Dielectric
Withstand Voltage . . 1000 VAC for one minute
Insulation
Resistance . . . . . . . . 1000 megohms Min. @ 500VDC
1
Frequency (MHz)
Impedance (ohms)
5251005010
5
10
100
25
50
Vertical
Angle
Right
Angle
Impedance
Frequency (Ohms)
(MHz) Right Angle Vertical
1 2 1
10 15 6
30 20 10
50 23 12
100 27 15
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Series F Ferrite Filtered
Connectors
FC4
Typ. Impedance
Part (Ohms) Frequency
Number Description 30 MHz 100 MHz Range
€
56-402-001 D-Sub
9 pin
€
56-412-001 D-Sub 20 27
15 pin
€
56-422-001 D-Sub
25 pin
A+/- B +/- C +/- D +/- E +/- F +/- G +/- H +/- I +/- J +/-
0.010 0.005 0.015 0.010 0.015 0.005 0.004 0.005 0.005 0.005
(0.25) (0.13) (0.38) (0.25) (0.38) (0.13) (0.10) (0.13) (0.13) (0.13)
0.666 0.984 1.213 0.318 0.751 0.324 0.108 0.984 0.432 0.606
(16.92) (25.00) (30.81) (8.08) (19.10) (8.22) (2.74) (25.00) (10.98) (15.40)
0.994 1.312 1.541 0.318 0.751 0.648 0.108 1.312 0.756 0.929
(25.25) (33.32) (39.14) (8.08) (19.10) (16.46) (2.74) (33.32) (19.20) (23.60)
1.534 1.852 2.088 0.318 0.751 1.196 0.110 1.852 1.304 1.476
(38.96) (47.04) (53.04) (8.08) (19.10) (30.36) (2.76) (47.04) (31.12) (37.50)
10
MHz
to
300
MHz
Pin Contact – Right Angle Mount
Dimensions in inches (mm)
€Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Series F Ferrite Filtered
Connectors
FC5
Dimensions in inches (mm)
Typ. Impedance
Part (Ohms) Frequency
Number Description 30 MHz 100 MHz Range
€
56-404-001 D-Sub
9 socket
€
56-414-001 D-Sub 20 27
15 socket
€
56-424-001 D-Sub
25 socket
€
56-414-001-HD
Hi-Density 16 26
15 socket
A+/- B +/- C +/- D +/- E +/- F +/- G +/- H +/- I +/- J +/-
0.010 0.005 0.015 0.010 0.015 0.005 0.004 0.005 0.005 0.005
(0.25) (0.13) (0.38) (0.25) (0.38) (0.13) (0.10) (0.13) (0.13) (0.13)
0.643 0.984 1.213 0.318 0.755 0.324 0.108 0.984 0.432 0.606
(16.33) (25.00) (30.81) (8.08) (19.20) (8.22) (2.74) (25.00) (10.98) (15.40)
0.971 1.312 1.541 0.318 0.755 0.648 0.108 1.312 0.756 0.929
(24.66) (33.32) (39.14) (8.08) (19.20) (16.46) (2.74) (33.32) (19.20) (23.60)
1.511 1.852 2.088 0.318 0.755 1.196 0.110 1.852 1.304 1.476
(38.38) (47.04) (53.04) (8.08) (19.20) (30.36) (2.76) (47.04) (31.12) (37.50)
0.643 0.984 1.213
(16.33) (25.00) (30.81) *See inset drawing
±
±
10
MHz
to
300
MHz
Socket Contact – Right Angle Mount
.100
(2.54)
PC Board Mounting Dimensions
Posn. No. Ref.
T
yp.
.100
(2.54)
.984
(24.99)
.045
(1.14)
Ty p . 15
6
125
.090
(2.29)
Ty p .
.277
(7.04)
.125 ± .003 Dia.
(3.18 ± 0.08)
.004 (0.10)
2 Holes .047 ± .002 Dia.
(1.19 ± 0.05)
.006 (0.15)
15 Holes
SCI Part Number
and Date Code
.350
(8.89)
.138 ± .010
(3.50 ± 0.25)
.494 ± .010
(12.55 ± 0.25)
.100
(2.54)
T
yp.
*High-Density
€Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Series F Ferrite Filtered
Connectors
FC6
Typ. Impedance
Part (Ohms) Frequency
Number Description 30 MHz 100 MHz Range
56-407-001 D-Sub
9 pin
56-417-001 D-Sub 10 15
15 pin
56-427-001 D-Sub
25 pin
10
MHz
to
300
MHz
Pin Contact – Vertical Mount
Dimensions in inches (mm)
A+/- B +/- C +/- D +/- E +/- F +/- G +/- H +/- I +/-
0.010 0.005 0.015 0.010 0.015 0.005 0.004 0.005 0.005
(0.25) (0.13) (0.38) (0.25) (0.38) (0.13) (0.10) (0.13) (0.13)
0.666 0.984 1.213 0.236 0.468 0.324 0.108 0.984 0.432
(16.92) (25.00) (30.81) (5.99) (11.88) (8.22) (2.74) (25.00) (10.98)
.994 1.312 1.541 0.236 0.468 0.648 0.108 1.312 0.756
(25.25) (33.32) (39.14) (5.99) (11.88) (16.46) (2.74) (33.32) (19.20)
1.534 1.852 2.088 0.236 0.468 1.196 0.110 1.852 1.304
(38.96) (47.04) (53.04) (5.99) (11.88) (30.36) (2.76) (47.04) (31.12)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Series F Ferrite Filtered
Connectors
FC7
Dimensions in inches (mm)
Typ. Impedance
Part (Ohms) Frequency
Number Description 30 MHz 100 MHz Range
56-403-001 D-Sub
9 socket
56-413-001 D-Sub 10 15
15 socket
56-423-001 D-Sub
25 socket
10
MHz
to
300
MHz
Socket Contact – Vertical Mount
A+/- B +/- C +/- D +/- E +/- F +/- G +/- H +/- I +/-
0.010 0.005 0.015 0.010 0.015 0.005 0.004 0.005 0.005
(0.25) (0.13) (0.38) (0.25) (0.38) (0.13) (0.10) (0.13) (0.13)
0.643 0.984 1.213 0.236 0.472 0.324 0.108 0.984 0.432
(16.33) (25.00) (30.81) (5.99) (11.98) (8.22) (2.74) (25.00) (10.98)
.971 1.312 1.541 0.236 0.472 0.648 0.108 1.312 0.756
(24.66) (33.32) (39.14) (5.99) (11.98) (16.46) (2.74) (33.32) (19.20)
1.511 1.852 2.088 0.236 0.472 1.196 0.110 1.852 1.304
(38.38) (47.04) (53.04) (5.99) (11.98) (30.36) (2.76) (47.04) (31.12)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC8
Series 500 Low Profile
Filtered Connectors
Metal
front
shell
Pin
terminal
Front
insulator
Tubular
capacitor
Ground
plane
Rear
insulator Right angle
termination
4-40
threaded
insert
Board
lock
Lead
spacer
API’s Spectrum Control brand of Series 500 are cost
effective, highly reliable EMI filtered D-subminiature
connectors that feature a .318" footprint for 90 degree
PCB connectors and a low profile housing on straight
PCB connectors. Series 500 filtered D-subs are “drop-in”
replacements for standard unfiltered D-sub connectors.
The ability of these connectors to achieve EMI filtering
within the smaller footprint is the result of technical
advances in ceramic capacitors. Series 500 connectors
use tubular capacitors for high performance EMI filtering.
Quality features for these connectors include board lock
mounting, metal front shells and gold plated contacts.
Series 500 capacitive filtered D-sub connectors are
an ideal solution to FCC/EC/VCCI emissions problems.
These connectors are designed to protect equipment
from external EMI noise and eliminate system glitches.
Series 500 Applications
■
Personal computers
■
Industrial process equipment
■
Graphics workstations
■
PBX telecommunications equipment
■
Cellular base stations and medical electronics
Features
■
“Drop-in” replacements for unfiltered D-subminiatures
■
Compact design, featuring .318" footprint
■
Tubular feed-through capacitors provide filtering
superior to on-board components
■
Ground plane design provides EMI shielding
■
Full interchangeability; based on MIL-C-24308
■
Each connector position is tested 100% for critical
electrical parameters to ensure consistent performance
■
Insulators are UL recognized UL94-V0
flammability rated
■
9, 15 and 25 shell sizes
■
Available with board lock feature
and 4-40 mounting threads
■
Selective filtering available
■
UL/CSA approved
■
Greater than 40 dB filtering up through
1 GHz without resonances
■
Bi-directional control of EMI at the I/O ports
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC9
Series 500 Low Profile
Filtered Connectors
Mechanical Specifications
Shell . . . . . . . . . . . . Steel, tin plated
Insulators . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . flammability UL94V-O
Pin Contacts . . . . . . Copper alloy CA725,
. . . . . . . . . . . . . . . . 15 microinch (0.38 µm) gold plated*
. . . . . . . . . . . . . . . . over nickel
Socket
Contacts . . . . . . . . . Copper alloy CA725,
. . . . . . . . . . . . . . . . 30 microinch (0.76 µm) gold plated*
. . . . . . . . . . . . . . . . over nickel
. . . . . . . . . . . . . *Heavier gold plating available upon request.
Ground
Plane. . . . . . . . . . . . Phosphor bronze, nickel plated
Operating
Temperature. . . . . . . -40°C to +125°C
Capacitors . . . . . . . . Proprietary barium titanate
. . . . . . . . . . . . . . . . ceramic formulations
Other environmental tests such as shock, vibration,
humidity, etc. are performed as detailed in our filtered
connector performance specifications on page FC81.
Electrical Specifications
Current
Rating. . . . . . . . . . . 5 Amps
RF Current
Rating. . . . . . . . . . . 0.3 Amps
Contact
Resistance . . . . . . . . 10 milliohms maximum
Capacitance . . . . . . . 120, 440, 840, 1000,
. . . . . . . . . . . . . . . . 1500 pF ±30%
Working
Voltage . . . . . . . . . . 100 VDC
Dielectric
Withstanding
Voltage . . . . . . . . . . 300 VDC
Insulation
Resistance . . . . . . . . 1 Gohm minimum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories,
. . . . . . . . . . . . . . . . File #E149046
1MHz 10MHz 100MHz 1GHz
Frequency
60
50
40
30
20
10
0
Insertion Loss (dB)
120 pF
1500 pF
440 pF
1000 pF
5GHz
Filter Performance
Typical Insertion Loss
Cap.
(pF)
Value
±30%
Insertion Loss (dB)
3 dB
Cut-off
Freq.
(MHz) 20 100 500 1 2 5
MHz MHz MHz GHz GHz GHz
120 40 –421 26 26 20
440 11 3 15 27 33 32 25
840 6619 32 38 37 25
1000 3821 35 41 38 25
1500 2 10 25 40 47 42 25
Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load.
Above data represents guaranteed minimum.
840 pF is typically within 2 dB of 1000 pF curve.
Above curves represent application of proper grounding
fundamentals. For assistance consult API.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC10
Series 500 Low Profile
Filtered Connectors
Pin Contact
(plug)
Straight PC Mount
90° PC Mount
Socket Contact
(receptacle)
Straight PC Mount
Size ABCDE
91.213 0.984 0.666 0.540 0.748
(30.81) (24.99) (16.92) (13.72) (19.00)
15 1.541 1.312 0.994 0.867 1.076
(39.14) (33.32) (25.25) (22.02) (27.33)
25 2.088 1.852 1.534 1.412 1.616
(53.04) (47.04) (38.96) (35.86) (41.05)
Size ABCDE
91.213 0.984 0.642 0.540 0.748
(30.81) (24.99) (16.31) (13.72) (19.00)
15 1.541 1.312 0.970 0.867 1.076
(39.14) (33.32) (24.64) (22.02) (27.33)
25 2.088 1.852 1.510 1.412 1.616
(53.04) (47.04) (38.35) (35.86) (41.05)
B
.329
(8.36)
.494
(12.55)
.105
(2.67)
1C
A
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
.025
(.64)
sq.
.318
(8.08)
.230
(5.84)
.243
(6.17)
.430
(10.92)
.375
(9.53)
.050
(1.27)
D
.483
(12.27)
E
90° PC Mount
D
.483
(12.27)
E
B
1C
A .329
(8.36)
.494
(12.55)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
.025
(.64)
sq.
.230
(5.84)
.243
(6.17)
.375
(9.53)
.050
(1.27)
.150
(3.81)
E
B
1
C
A .312
(7.92)
.494
(12.55)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
.025
(.64)
sq.
.243
(6.17)
.243
(6.17)
.375
(9.53)
.050
(1.27)
.150
(3.81)
E
B
1
C
A .312
(7.92)
.494
(12.55)
.105
(2.67)
.120±.005 (3.05±.13)
dia. holes or optional
#4–40 UNC
.025
(.64)
sq.
.318
(8.08)
.243
(6.17)
.243
(6.17)
.430
(10.92)
.375
(9.53)
.050
(1.27)
Dimensions in inches (mm) Dimensions in inches (mm)
Standard Tolerance = ±.015 (0.38) Standard Tolerance = ±.015 (0.38)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC11
Series 500 Low Profile
Filtered Connectors
Shell
Size AB C D
.984 .436 = 4 x .109 .327 = 3 x .109 .492
9(24.99) (11.07 = 4 x 2.77) (8.31 = 3 x 2.77) (12.50)
1.312 .763 = 7 x .109 .654 = 6 x .109 .656
15 (33.32) (19.38 = 7 x 2.77) (16.61 = 6 x 2.77) (16.66)
1.852 1.308 = 12 x .109 1.199 = 11 x .109 .926
25 (47.04) (33.22 = 12 x 2.77) (30.45 = 11 x 2.77) (23.52)
#4–40 UNC-2B
2 holes
.105
(2.67)
Fits .125 (3.18)
diameter hole
.040 (1.02)B
.109 (2.77) .112
(2.84)
.056
(1.42)
.125
(3.18)
A
C
D
.054
(1.37)
Board edge
.375
(9.53)
Ordering Information
Example: 56-524-013-GBL
Board Layout
GBL Option
Typical Layout for .318" (8.08) Footprint
Features
■
Snap-in retention to PC board,
requires no hardware
■
Ensures low ground impedance
for superior filtering
■
4-40 threads on mounting flange
eliminate loose hardware
56 -524 - 013 - GBL
Filtered
D-sub
Connectors
Series 500
Connectors
Shell Size/
Number of
Contacts
0- 9 size
1-15 size
2-25 size
Contact Type/Termination
2 - Pin to 90° PCB mount
3 - Socket to straight PCB mount
4 - Socket to 90° PCB mount
7 - Pin to straight PCB mount
Capacitance
Value
010 - 120 pF
011 - 440 pF
012 - 840 pF
013 - 1000 pF
014 - 1500 pF
Mounting or Hardware Options
TI - 4-40 threads on mounting
flange (.120" (3.05mm) hole
if not selected)
GBL - Grounded board lock,
includes 4-40 threads
(available only on 90° PCB)
GBLF - Grounded board lock and ferrite
slab, provides the enhanced
performance of an (LC) filter
(available only on 90° PCB)
This part number represents a Series 500 filtered D-sub connector with 25 contacts,
socket to 90° PCB mount configuration. The filter has a capacitance value of 1000 pF
and the connector includes a grounded board lock.
For special needs or combinations of features, contact API engineering.
.025
(.64)
sq.
.318
(8.08)
.374
(9.50)
Dimensions in inches (mm)
Dimensions in inches (mm)
–-Standard connector
F-RoHS compliant version
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC12
Series 600 High-Density
Filtered Connectors
The miniaturization of electronic systems and sub-systems
is pushing designers to increase circuit densities within
smaller packages. To address this growing need, API
Technologies’ Spectrum Control brand has developed a
line of filtered High-Density D-subminiature connectors.
This new line of connectors incorporates the high
performance and reliable filtering of API’s standard
D-subs in the High-Density format.
Features
■
Connectors designed to MIL-C-24308
■
Capacitance values from 85 pF to 4000 pF
■
Filter type feed-through C
■
Selectively specify and filter each contact position
■
Available in feed-through capacitive configurations
Mechanical Specifications:
Same as Series 700 connectors, page FC21.
0
80
60
20
40
10
30
50
70
Insertion Loss (dB)
15
16
18
19
Frequency
1MHz 10MHz 100MHz 1GHz 5GHz
Capacitive Filter
Typical Insertion Loss
Above curves represent application of proper
grounding fundamentals, for assistance consult
with Spectrum Control.
Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts.
Filter designation “O” for omitted contact and no hole in ground plane.
Insertion loss measured per MIL-STD-220, no load, 50 ohm source and load.
Electrical Specifications: High-Density Connectors
3 dB
Cut-off
Fre-
quency
Max.
(MHz)
Dielectric
With-
standing
Voltage
Working
Voltage DC
-55°C to
+125°C
5
MHz
10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
2
GHz
5
GHz
Filter
Circuits
Filter
Desig-
nations
Capacitance Minimum Insertion Loss - Decibels (dB)
Value
15 ±25% 60
28
5.1
1.3
300V
300V
300V
300V
100V
100V
100V
100V
—
—
—
—
3
13
—
—
8
19
—
1
14
26
1
8
20
31
6
10
25
37
16
18
32
45
21
25
35
48
—
8
±25%
±25%
±25%
16
18
19
C
4000 pF
1000 pF
180 pF
85 pF
Tol.
22
26
41
52
20
24
39
47
Above data represents guaranteed minimum.
This part number represents a Series 600 Hi-Density filtered D-Sub
connector with 15 contacts, pin-socket adapter configuration. The FT
filters have a capacitance value of 85 pF and the connector includes
4-40 locking inserts.
Ordering Information
Example: 56-605-015-LI
56 -605 - 0 15 - LI
D-Sub
Connector
Hi-Density Shell
Size**
0 = 15
1 = 26
2 = 44
3 = 62
4 = 78
Contact/Termination
1 - Pin to solder cup
2 - Pin to 90° PCB mount*
3 - Socket to PCB mount
4 - Socket to 90° PCB*
mount
5 - Pin-socket adapter
7 - Pin to PCB mount
Special
0 = All
positions
same
9 = Special
loading
** Some shell sizes require minimum order quantity.
Consult API for details.
Filter Designation
15 - 85 pF FT
16 - 180 pF FT
18 - 1,000 pF FT
19 - 4,000 pF FT
20 - Insulated contact
Options
LI = 4-40 inserts
S = Solder dip tails
50G = µ gold
GBL = Grounding board lock
-Standard connector
F-RoHS compliant version
* Required on right angle parts
Electrical Specifications
Current Rating . . . . 3 Amps
RF Current Rating. . 0.3 Amps
Contact Resistance . . 15 milliohms maximum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories, File #E149046
Note: VGA adapters also available. Consult factory
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC13
Series 600 High-Density
Filtered Connectors
Pin/Socket Adapter
Size
15 1.213
(30.81)
1.541
(39.14)
2.088
(53.04)
2.729
(69.32)
2.635
(66.93)
.984
(24.99)
1.312
(33.32)
1.852
(47.04)
2.500
(63.50)
2.406
(61.11)
.640
(16.26)
.968
(24.59)
1.508
(38.30)
2.156
(54.76)
2.062
(52.37)
.304
(7.72)
.304
(7.72)
.304
(7.72)
.304
(7.72)
.416
(10.57)
.505
(12.83)
.505
(12.83)
.505
(12.83)
.505
(12.83)
.615
(15.62)
.666
(16.92)
.994
(25.25)
1.534
(38.96)
2.182
(55.42)
2.079
(52.81)
.333
(8.46)
.333
(8.46)
.333
(8.46)
.333
(8.46)
.420
(11.18)
26
44
62
78
ABCDEFG
Socket End
Pin End 78 size has 4 rows of contacts
Socket Pin
A
C
B
F
G
.153±.005
(3.89±.13)
dia. holes
1.000
(25.40)
.243
(6.17)
.050
(1.27)
.238
(6.05)
1
10°
DE
1
Pin or Socket to Solder Cup, PCB Mount and 90° PCB Mount
Size
15 1.213
(30.81)
1.541
(39.14)
2.088
(53.04)
2.729
(69.32)
2.635
(66.93)
.984
(24.99)
1.312
(33.32)
1.852
(47.04)
2.500
(63.50)
2.406
(61.11)
.505
(12.83)
.505
(12.83)
.505
(12.83)
.505
(12.83)
.615
(15.62)
.666
(16.92)
.994
(25.25)
1.534
(38.96)
2.182
(55.42)
2.079
(52.81)
.333
(8.46)
.333
(8.46)
.333
(8.46)
.333
(8.46)
.440
(11.18)
.757
(19.23)
1.085
(27.56)
1.625
(41.28)
2.273
(57.73)
2.170
(55.12)
.420
(10.67)
.420
(10.67)
.420
(10.67)
.420
(10.67)
.527
(13.39)
26
44
62
78
ABCDEFG
Dimensions in inches (mm)
Mating Face Termination End
Solder Cup 90° PCB Mount 90° PCB Mount
78 line HD
A
D
B
E
F
G
C
10° 10°
.050
(1.27)
.238
(6.05)
.125
(3.18)
.358
(9.09)
P.C. Tail
.025 (.64) dia.
.120±.005
(3.05±.13)
dia. holes
Solder Cup
.045 (1.14 )
O.D. .026 (.66)
Min. I.D.
1
1
.350
(8.89)
.400
(10.16)
.243
(6.17)
.050
(1.27)
.660 (16.76)
.150 (3.81)
.030 (7.62) Rd.
.100 (2.54)
.100 (2.54)
.243
(6.17)
.450
(11.43)
.050
(1.27)
Boardlock
Centerline
(ø.125
thru x2)
.125±.020
(3.18±.508)
.100 (2.54)
ø.0 30 (.77)
.350
(8.89)
.100 (2.54)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC14
High-Density Filtered Adapter
for Telecommunications
Mechanical Specifications
Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel
. . . . . . . . . . . . . . . . plated 150 µ inches (3.81 µm) min.
Insulators . . . . . . . . Thermoplastic, UL94V-0
Contacts . . . . . . . . . One-piece, screw machined
. . . . . . . . . . . . . . . . Copper alloy, contact area plated
. . . . . . . . . . . . . . . . 50 µ inches (1.27 µm) gold
. . . . . . . . . . . . . . . . over 50 µ inches (1.27 µm) nickel
Ground Plane . . . . . Brass, solder plated
Grounding
Springs . . . . . . . . . . Beryllium copper, tin plated per
. . . . . . . . . . . . . . . . MIL-T-10727
Operating
Temperature. . . . . . . -55°C to +125°C
Capacitor. . . . . . . . . High performance ceramic
. . . . . . . . . . . . . . . . feed-through utilizing ultra low
. . . . . . . . . . . . . . . . ESR design
Electrical Specifications
Rated Voltage. . . . . . 100 VDC
Current
Rating. . . . . . . . . . . 3 Amps
DC Resistance . . . . . 15 milliohm max.
Dielectric
Withstanding
Voltage . . . . . . . . . . 1000 VRMS (FCC Part 68 test)
Capacitance . . . . . . . 1000 pF, ±25%
Voltage Surge . . . . . meets 2500 volts surge (10/1000)
. . . . . . . . . . . . . . . . (See Wave form figure on
. . . . . . . . . . . . . . . . next page)
Within the telecommunications industry, it has been
standard practice to use an adapter (male/female) type
of EMI filtered connector as the interface between the
switching system electronics and the premise wiring.
These filtered adapters provide effective containment
of EMI compared to either D-subminiature or 50-position
“ribbon” contact type connectors.
The following several factors have mandated the
development of a new generation of filtered adapters.
Special Requirements
■
Higher density wiring
■
The need for more contacts, usually
a multiple of 16
■
Higher reliability contact geometries
■
Bellcore TR-NWT-001089 requirements
■
1000 volts AC withstand for one minute
■
2500 volts spike surge testing
■
Improved flammable resistant plastic insulators
API’s Spectrum Control brand, in response to these unique
requirements of the telecommunication industry,
has developed a new high-density filtered adapter.
Features
■
New ceramic technology and filter element
construction to accept higher voltages
■
Improved reliability compared to “ribbon”
type connectors
■
Integral ground plane and one-piece diecast
housing for the highest level of EMI integrity
■
More contacts/wires per square inch of panel space
through high-density arrangements
■
64 contact positions standard, with 78 positions
available by request in any filter combination
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC15
High-Density Filtered Adapter
for Telecommunications
Filter Performance
Part Number for Ordering: #56-645-002
Minimum Insertion Loss
20 MHz . . . . . . . . . . . . . . . . . . . . . . 7 dB
50 MHz . . . . . . . . . . . . . . . . . . . . . 14 dB
100 MHz . . . . . . . . . . . . . . . . . . . . . 20 dB
500 MHz . . . . . . . . . . . . . . . . . . . . . 32 dB
1 GHz . . . . . . . . . . . . . . . . . . . . . 35 dB
2 GHz . . . . . . . . . . . . . . . . . . . . . 41 dB
5 GHz . . . . . . . . . . . . . . . . . . . . . 39 dB
Insertion loss measured per MIL-STD-220, no load, 50 ohm source
and load. Above data represents guaranteed minimum.
2.079
(52.81)
.440
(11.18)
#4-40 UNC - 2B
Locking Inserts
4 plcs.
21 238 19
41 60 77 58
Position numbers
shown for reference
Pin Face
.520
(13.21)
.050
(1.27)
1.000
(25.40)
.243
(6.17) .238
(6.05)
Side View
.041
(1.04)
.082
(2.08)
2.635 (66.93)
2.062 (52.37)
.190
(4.83)
.0475 (1.21)
.095 (2.41)
2.406 (61.11)
Socket Face
.615
(15.62)
.416
(10.57)
.190
(4.83)
Dimensions in inches (mm)
Frequency
1MHz 10MHz 100MHz 1GHz
0
20
40
10
30
50
Insertion Loss (dB)
5GHz
Typical Insertion Loss
0
50
Peak Pulse Voltage, % Vpp
123456
t - - Time - - msec
100
0
Test Waveform
Parameters
tr = 10µsec
tp = 1000µs
Peak Value – Vpp
10 x 1000 Waveform
Hall Value – Vpp
2
et
tr
tp
Pulse Wave Form* (10 x 1000)
Above curves represent application of proper
grounding fundamentals, for assistance consult
with API.
*Reference Bellcore TR-NWT-1089, Vpp = 1000V
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC16
Series 700 High Performance
Filtered Connectors
Filter Selection
API’s Spectrum Control brand of Series 700 connectors
offer the highest performance filtering for all types of
professional applications.
Features
n
Available in 9, 15, 25, 37 and 50 shell sizes
n
Variety of termination configurations including
right angle and straight PCB for both pin and
socket contact and as an adapter
n
Capacitive and Pi type filters in a full range
of capacitance values
The catalog data for this series is presented in
order of shell size, and grouped by pin and socket
contacts. Part numbers must be selected from the
tables within the series section.
Insertion loss measured per MIL-STD-220, no load, 50ohm source and load.
Filter designation “G” for grounded contacts, “I” for insulated (not filtered) contacts.
Filter designation “O” for omitted contact and no hole in ground plane.
Electrical Specifications: High Performance Connectors
3 dB
Cut-off
Fre-
quency
Max.
(MHz)
Dielectric
With-
standing
Voltage
Working
Voltage DC
-55°C to
+125°C
5
MHz
10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
Filter
Circuits
Filter
Desig-
nations
Capacitance Minimum Insertion Loss - Decibels (dB)
Value Tol.
J+100 -0% 32 300V 100V — — —2 5 8 16 33
100 pF
A ±20% 17 300V 100V — —2 6 10 17 33 50
310 pF
PiC +150 -0% 3.2 300V 100V — 38 17 27 39 58 70
1000 pF
K+100 -0% 1.3 150V 50V 6 10 15 30 42 55 70 70
2500 pF
E+100 -0% 0.8 150V 50V 813 20 37 50 64 70 70
4000 pF
N ±20% 14 600V 200V — —2 7 12 18 26 32
375 pF
L ±20% 10.6 600V 200V — —3914 20 28 34
500 pF
CF ±20% 6.4 600V 200V — 3 7 13 18 24 32 38
830 pF
B+100 -0% 3.2 600V 200V — 4 9 16 22 28 36 42
1000 pF
D+100 -0% 0.64 300V 100V 10 16 22 30 35 41 50 56
5000 pF
Above data represents guaranteed minimum.
Typical Insertion Loss
Above curves represent application of proper grounding
fundamentals, for assistance, consult API.
Insertion Loss (dB)
1MHz
80
70
60
50
40
30
20
10
0
Insertion Loss (dB)
10MHz 100MHz 1GHz
Frequency
1MHz
80
70
60
50
40
30
20
10
010MHz 100MHz 1GHz
Frequency
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC17
Series 700
Specifications and Connector Ordering
Mechanical Specifications
Shell . . . . . . . . . . . . Zinc or aluminum diecast, nickel plated
. . . . . . . . . . . . . . . . 150 µ inches (3.81 µm) min.
Insulators . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . flammability UL94V-0
Pin Contacts . . . . . . Copper alloy, 15 µ inches
. . . . . . . . . . . . . . . . (0.38 µm) gold plated * over nickel
Socket Contacts . . . . Copper alloy, 30 µ inches
. . . . . . . . . . . . . . . . (0.76 µm) gold plated * over nickel
. . . . . . . . . . . . . . . . *Heavier gold plating available upon request.
. . . . . . . . . . . . . . . . . . . . . . See pg. FC43: Connector Options
Terminations . . . . . . Gold flash for PCB mount and solder
. . . . . . . . . . . . . . . . cups. Solder dipped also available.
Ground Plane . . . . . Brass, solder plated
Grounding
Springs . . . . . . . . . . Beryllium copper, tin plated per
. . . . . . . . . . . . . . . . MIL-T-10727
Operating
Temperature. . . . . . . -55°C to +125°C
Capacitors . . . . . . . . Proprietary barium titanate
. . . . . . . . . . . . . . . . ceramic formulations
Electrical Specifications
Current Rating . . . . 5 Amps
R.F. Current
Rating. . . . . . . . . . . 0.3 Amps
Contact
Resistance . . . . . . . . 10 milliohms maximum
UL Recognized. . . . . Under category of communication
. . . . . . . . . . . . . . . . circuit accessories, File #E149046
Inductance on
PI Filters . . . . . . . . . ~ 860 nH between 100 kHz and 1 MHz
Solder cups accept up to a 20 gauge wire.
Ordering Your Connector
STEP 1: SELECTING THE FILTER
■
Using the insert loss graphs on page FC20
determine which filters provide the required
attenuation at the troublesome frequency, while
not affecting the signal frequency by more than
3 to 6 dB.
■
Choose the filter type, either feed-through capacitor
or Pi. The Pi is generally considered better due to its
superior high frequency performance and steeper
curve. The feed-through capacitor is lower cost.
■
Select capacitance value.
■
Note the Spectrum letter designation for the
filter chosen from the table on page FC20.
STEP 2: SELECTING THE CONNECTOR
■
Turn to the appropriate size section.
(9, 15, 25, 37, 50)
■
Choose either pin contacts (plug) or socket
contacts (receptacle).
■
Choose the required termination type.
■
From the table on the appropriate connector
page, using the filter letter designation chosen
in step 1 above, select the part number.
STEP 3: SPECIFYING OPTIONS
■
Refer to page FC43 for special options
including heavy gold plating, 4-40 mounting
threads, grounding brackets, hardware,
and others.
■
Most options are available within the standard
lead times.
■
Some options require a part number suffix,
while other combinations may require factory
assistance for part number assignment. If a
suffix is shown, add it to your selected part
number. If more than one option is needed,
consult with factory for part number
assignment.
Note:
For additional mechanical, electrical, and
environmental specifications, refer to page FC79.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC18
Series 700
Pin Contact
9
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-701-001
56-701-002
56-701-003
56-701-004
56-701-005
56-701-028
56-701-029
56-701-030
56-701-047
56-701-086
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
* 56-702-001
56-702-002
* 56-702-003
56-702-004
* 56-702-005
56-702-007
56-702-008
56-702-009
56-702-013
* 56-702-033
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC19
Series 700
Pin Contact
9
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-701
56-701
56-701
56-701
56-701
56-701
56-701
56-701
56-701
-006 -022 -017 A 310 pF Pi
-007 -023 -018 B 1000 pF C
-008 -024 -019 C 1000 pF Pi
-009 -025 -020 D 5000 pF C
-010 -026 -021 E 4000 pF Pi
-037 -034 -031 F 830 pF C
-038 -035 -032 J 100 pF Pi
-039 -036 -033 K 2500 pF Pi
-050 -049 -048 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-701-011
* 56-701-012
* 56-701-013
* 56-701-014
* 56-701-015
* 56-701-040
56-701-041
56-701-042
56-701-081
56-701-087
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Mating Face
Termination Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC20
Series 700
Socket Contact
9
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-703-001
56-703-002
56-703-003
56-703-004
56-703-005
56-703-022
56-703-023
56-703-024
56-703-036
56-703-047
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
56-704-001
56-704-002
* 56-704-003
56-704-004
* 56-704-005
56-704-007
56-704-008
56-704-009
56-704-018
56-704-035
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC21
Series 700
Socket Contact &
Pin/Socket Adapter
9
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-703
56-703
56-703
56-703
* 56-703
56-703
56-703
56-703
56-703
-006 -016 -011 A 310 pF Pi
-007 -017 -012 B 1000 pF C
-008 -018 -013 C 1000 pF Pi
-009 -019 -014 D 5000 pF C
-010 -020 * -015 E 4000 pF Pi
-031 -028 -025 F 830 pF C
-032 -029 -026 J 100 pF Pi
-033 -030 -027 K 2500 pF Pi
-039 -038 -037 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-706-001
56-706-002
* 56-706-003
56-706-004
* 56-706-005
56-706-006
56-706-007
* 56-706-008
56-706-009
56-706-017
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Side View
Pin/Socket Adapter
Spectrum
Part
Number
* 56-705-001
56-705-002
* 56-705-003
56-705-004
* 56-705-005
* 56-705-008
56-705-009
56-705-010
56-705-026
56-705-049
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Socket Face Pin Face
Side View
€Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
€
€
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC22
Series 700
Pin Contact
15
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-711-001
56-711-002
56-711-003
56-711-004
56-711-005
56-711-028
56-711-029
56-711-030
56-711-048
56-711-088
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
* 56-712-001
56-712-002
* 56-712-003
56-712-004
* 56-712-005
* 56-712-007
56-712-008
56-712-009
56-712-017
56-712-039
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC23
Series 700
Pin Contact
15
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-711
56-711
56-711
56-711
56-711
56-711
56-711
56-711
56-711
-006 -023 -018 A 310 pF Pi
-007 -024 -019 B 1000 pF C
-008 -025 -020 C 1000 pF Pi
-009 -026 -021 D 5000 pF C
-010 -027 -022 E 4000 pF Pi
-037 -034 -031 F 830 pF C
-038 -035 -032 J 100 pF Pi
-039 -036 -033 K 2500 pF Pi
-051 -050 -049 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-711-011
56-711-012
* 56-711-013
56-711-014
* 56-711-015
* 56-711-040
56-711-041
56-711-042
56-711-085
56-711-086
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Mating Face
Termination Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC24
Series 700
Socket Contact
15
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-713-001
56-713-002
56-713-003
56-713-004
56-713-005
56-713-021
56-713-022
56-713-023
56-713-037
56-713-045
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
* 56-714-001
56-714-002
* 56-714-003
56-714-004
* 56-714-005
* 56-714-006
56-714-007
56-714-008
56-714-017
56-714-031
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC25
Series 700
Socket Contact &
Pin/Socket Adapter
15
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-713
56-713
56-713
56-713
56-713
56-713
56-713
56-713
56-713
-006 -016 -011 A 310 pF Pi
-007 -017 -012 B 1000 pF C
-008 -018 -013 C 1000 pF Pi
-009 -019 -014 D 5000 pF C
-010 -020 -015 E 4000 pF Pi
-030 -027 -024 F 830 pF C
-031 -028 -025 J 100 pF Pi
-032 -029 -026 K 2500 pF Pi
-040 -039 -038 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-716-001
56-716-002
* 56-716-003
56-716-004
* 56-716-005
56-716-006
56-716-007
* 56-716-008
56-716-009
56-716-013
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Side View
Pin/Socket Adapter
Spectrum
Part
Number
* 56-715-001
56-715-002
* 56-715-003
56-715-004
* 56-715-005
56-715-007
56-715-008
56-715-009
56-715-015
56-715-040
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Socket Face Pin Face
Side View
€Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
€
€
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC26
Series 700
Pin Contact
25
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-721-001
56-721-002
56-721-003
56-721-004
56-721-005
56-721-033
56-721-034
56-721-035
56-721-063
56-721-111
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
* 56-722-001
56-722-002
* 56-722-003
56-722-004
* 56-722-005
* 56-722-008
56-722-009
56-722-010
56-722-027
56-722-060
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC27
Series 700
Pin Contact
25
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-721
56-721
56-721
56-721
56-721
56-721
56-721
56-721
56-721
-006 -028 -024 A 310 pF Pi
-007 -029 -025 B 1000 pF C
-008 -030 -026 C 1000 pF Pi
-009 -031 -022 D 5000 pF C
-010 -032 -027 E 4000 pF Pi
-042 -039 -036 F 830 pF C
-043 -040 -037 J 100 pF Pi
-044 -041 -038 K 2500 pF Pi
-066 -065 -064 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-721-011
* 56-721-012
* 56-721-013
56-721-014
* 56-721-015
* 56-721-045
56-721-046
56-721-047
56-721-070
56-721-112
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Mating Face
Termination Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC28
Series 700
Socket Contact
25
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-723-001
56-723-002
56-723-003
56-723-004
56-723-005
56-723-023
56-723-024
56-723-025
56-723-045
56-723-069
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
* 56-724-001
56-724-002
* 56-724-003
56-724-004
* 56-724-005
* 56-724-008
56-724-009
56-724-010
56-724-021
56-724-046
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Bottom View
Side
View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC29
Series 700
Socket Contact &
Pin/Socket Adapter
25
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
* 56-723
56-723
* 56-723
56-723
* 56-723
* 56-723
56-723
56-723
56-723
-006 -017 * -012 A 310 pF Pi
-007 -018 -013 B 1000 pF C
-008 -019 * -014 C 1000 pF Pi
-009 -020 -015 D 5000 pF C
-010 -021 * -016 E 4000 pF Pi
-032 -029 * -026 F 830 pF C
-033 -030 -027 J 100 pF Pi
-034 -031 -028 K 2500 pF Pi
-048 -047 -046 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-726-001
56-726-002
* 56-726-003
56-726-004
* 56-726-005
56-726-006
56-726-007
* 56-726-008
56-726-009
56-726-021
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face Termination Face
Side View
Pin/Socket Adapter
Spectrum
Part
Number
* 56-725-001
56-725-002
* 56-725-003
56-725-004
* 56-725-005
* 56-725-019
56-725-020
* 56-725-021
56-725-064
56-725-073
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Socket Face Pin Face
Side View
€Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
€
€
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC30
Series 700
Pin Contact
37
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-731-001
56-731-002
56-731-003
56-731-004
56-731-005
56-731-028
56-731-029
56-731-030
56-731-048
56-731-076
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
56-732-001
56-732-002
* 56-732-003
56-732-004
* 56-732-005
56-732-006
56-732-007
56-732-008
56-732-009
56-732-023
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Bottom View
Side View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC31
Series 700
Pin Contact
37
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-731
56-731
56-731
56-731
56-731
56-731
56-731
56-731
56-731
-006 -023 -018 A 310 pF Pi
-007 -024 -019 B 1000 pF C
-008 -025 -020 C 1000 pF Pi
-009 -026 -021 D 5000 pF C
-010 -027 -022 E 4000 pF Pi
-037 -034 -031 F 830 pF C
-038 -035 -032 J 100 pF Pi
-039 -036 -033 K 2500 pF Pi
-051 -050 -049 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-731-011
56-731-012
* 56-731-013
56-731-014
* 56-731-015
* 56-731-040
56-731-041
56-731-042
56-731-060
56-731-077
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Mating Face
Termination Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC32
Series 700
Socket Contact
37
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-733-001
56-733-002
56-733-003
56-733-004
56-733-005
56-733-021
56-733-022
56-733-023
56-733-035
56-733-046
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
56-734-001
56-734-002
56-734-003
56-734-004
56-734-005
56-734-006
56-734-007
56-734-008
56-734-012
56-734-021
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Bottom View
Side View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC33
Series 700
Socket Contact &
Pin/Socket Adapter
37
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
* 56-733
56-733
56-733
56-733
56-733
56-733
56-733
56-733
56-733
-006 -016 * -011 A 310 pF Pi
-007 -017 -012 B 1000 pF C
-008 -018 -013 C 1000 pF Pi
-009 -019 -014 D 5000 pF C
-010 -020 -015 E 4000 pF Pi
-030 -027 -024 F 830 pF C
-031 -028 -025 J 100 pF Pi
-032 -029 -026 K 2500 pF Pi
-038 -037 -036 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-736-001
56-736-002
* 56-736-003
56-736-004
* 56-736-005
56-736-006
56-736-007
* 56-736-008
56-736-009
56-736-015
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Pin/Socket Adapter
Spectrum
Part
Number
* 56-735-001
56-735-002
* 56-735-003
56-735-004
* 56-735-005
* 56-735-008
56-735-009
56-735-010
56-735-025
56-735-034
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Socket Face
Pin Face
Side View
€Also available through API’s authorized European distributors/agents.
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
€
€
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC34
Series 700
Pin Contact
50
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-741-001
56-741-002
56-741-003
56-741-004
56-741-005
56-741-027
56-741-028
56-741-029
56-741-042
56-741-066
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
56-742-001
56-742-002
56-742-003
56-742-004
56-742-005
56-742-006
56-742-007
56-742-008
56-742-009
56-742-022
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Bottom View
Side View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC35
Series 700
Pin Contact
50
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-741
56-741
56-741
56-741
56-741
56-741
56-741
56-741
56-741
-006 -022 -017 A 310 pF Pi
-007 -023 -018 B 1000 pF C
-008 -024 -019 C 1000 pF Pi
-009 -025 -020 D 5000 pF C
-010 -026 -021 E 4000 pF Pi
-036 -033 -030 F 830 pF C
-037 -034 -031 J 100 pF Pi
-038 -035 -032 K 2500 pF Pi
-045 -044 -043 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
* 56-741-011
* 56-741-012
* 56-741-013
* 56-741-014
* 56-741-015
56-741-039
56-741-040
56-741-041
56-741-063
56-741-067
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Mating Face
Termination Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC36
Series 700
Socket Contact
50
Shell Size
Printed Circuit Board Mount
Spectrum
Part
Number
56-743-001
56-743-002
56-743-003
56-743-004
56-743-005
56-743-021
56-743-022
56-743-023
56-743-033
56-743-043
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Printed Circuit Board Right Angle Mount
Spectrum
Part
Number
56-744-001
56-744-002
56-744-003
56-744-004
56-744-005
56-744-006
56-744-007
56-744-008
56-744-009
56-744-012
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
Bottom View
Termination Face
Mating Face
Side View
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC37
Series 700
Socket Contact &
Pin/Socket Adapter
50
Shell Size
Solderless Wire Wrap
Spectrum Part Number
Select one
56-743
56-743
56-743
56-743
56-743
56-743
56-743
56-743
56-743
-006 -016 -011 A 310 pF Pi
-007 -017 -012 B 1000 pF C
-008 -018 -013 C 1000 pF Pi
-009 -019 -014 D 5000 pF C
-010 -020 -015 E 4000 pF Pi
-030 -027 -024 F 830 pF C
-031 -028 -025 J 100 pF Pi
-032 -029 -026 K 2500 pF Pi
-036 -035 -034 N 375 pF C
EMI Filter
Cap. Value
Filter
Desig.**
LL L
.500 .375 .250
Mating Face
Termination Face
Side View
Solder Cup Termination
Spectrum
Part
Number
56-746-001
56-746-002
56-746-003
56-746-004
56-746-005
56-746-006
56-746-007
56-746-008
56-746-009
56-746-018
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Mating Face
Termination Face
Side View
Pin/Socket Adapter
Spectrum
Part
Number
* 56-745-001
56-745-002
* 56-745-003
56-745-004
* 56-745-005
56-745-006
56-745-007
56-745-008
56-745-019
56-745-027
A 310 pF Pi
B 1000 pF C
C 1000 pF Pi
D 5000 pF C
E 4000 pF Pi
F 830 pF C
J 100 pF Pi
K 2500 pF Pi
N 375 pF C
L 500 pF C
EMI Filter
Cap. Value
Filter
Designation**
Socket Face
Pin Face
Side View
* May be available from distributor stock.
** See page FC20 for filter performance.
Standard Tolerance = ±.005 except where noted, ◊ = ±.015
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC38
D-Subminiature
Part Numbering System
To assist your efforts in selecting the correct Filtered Connector to meet your needs,
we have developed a part numbering system. All of the standard products are shown
in their respective catalog pages.
Part number 56-513-012-TI represents a Series 500 connector with 15 contacts
in a socket to straight PCB mount configuration. All connector positions have
a capacitance value of 840 pF and there are 4-40 threads on mounting flange.
Ordering Information
Example: 56-513-012-TI
56 - 5 1 3 - 0 12 - TI
Capacitance
Value
Series 400
01 = Always
Series 500
10 = 120 pF
11 = 440 pF
12 = 840 pF
13 = 1000 pF
14 = 1500 pF
Series 600
15 = 85 pF FT
16 = 180 pF FT
18 = 1000 pF FT
19 = 4000 pF FT
20 = Insulated
contact
Series 700
See filter specifi-
cation chart on
page FC20 and
select part numbers
from Series 700
charts pages
FC22-FC41.
Shell Size
Series 400 &
Series 500
0 = 9 Contacts
1 = 15 Contacts
2 = 25 Contacts
3 = 37 Contacts
Series 600
Hi-Density
0 = 15 Contacts
1 = 26 Contacts
2 = 44 Contacts
3 = 62 Contacts
4 = 78 Contacts
Series 700
0 = 9 Contacts
1 = 15 Contacts
2 = 25 Contacts
3 = 37 Contacts
4 = 50 Contacts
Line
Filtering
0 = All
positions
same
9 = Special
loading
(Series
600 only)
Filtered
D-Subminiature
Connectors
Options
See options descriptions
on page FC43
add suffix ending
Series F
HD = Hi-Density
(15 socket only)
Series 500
TI = 4-40 threads on mounting
flange (.125” hole if not
selected)
GBL = Grounded board lock
includes 4-40 threads
(available only on 90° PCB)
GBLF = Grounded board lock
and ferrite slab
provides enhanced LC
performance. (Available
only on 90° PCB)
Series 600 Hi-Density
LI = 4-40 UNC inserts
S = Solder dipped tails/Solder Cups*
50G = 50 µ (1.27 µm) gold
GBL = Ground board lock
Series 700
LI = 4-40 UNC inserts
LIM = Metric M3.0 self-locking threads
GB = Metal bracket provides ground
connection, includes 4-40
self-locking threads (for right angle
mount only)
GBL = Grounded board lock
(right angle)
GBL6 = for .062” boards (straight
PCB mount) (1.57mm)
GBL9 = for .093” boards (straight
PCB mount (2.36mm)
50G = 50 µ (1.27 µm) gold plating
S = Solder dipped tails/Solder Cups*
JS = Jackscrew mounting
For option combinations, consult factory.
*Dipped Solder Cup
- No socket to solder cup product
- Solder cups may be full of solder
- Standard part: Sn60 or equivalent
- RoHS Part: Sn96 or equivalent
Product
Series
4 = Series F
Ferrite
5 = Series 500
Low Profile
6 = Series 600
Hi-Density
7 = Series 700
High
Performance
Contact Type/Termination
1 = Pin to solder cup
2 = Pin to 90° PCB mount
3 = Socket to straight PCB mount
4 = Socket to 90° PCB mount
5 = Pin-socket adapter
6 = Socket to solder cup
7 = Pin to straight PCB mount
Styles available for:
Series 400 only 2, 3, 4, 7
Series 500 only 2, 3, 4 & 7
Series 600 only 1, 2, 3, 4, 5
Series 700 1 thru 7
Note: 1 can be Pin to solder cup
or Pin to PCB for Series 700.
See charts pages FC22-FC41.
- Standard connector
F - RoHS compliant version
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC39
D-Subminiature
Connector Options
Threaded Inserts
Available on Series 500, 600 & 700
■
#4-40 UNC or metric M3.0 threaded
inserts in mounting flanges
■
Allows ease of panel-assembly
■
Plated steel inserts with last thread
upset for torque
Grounding Bracket
For right angle mount PCB connectors, available
on Series 700
■
Metal bracket in place of plastic
■
Provides ground connection direct
from circuit board
■
Allows shell grounding to board
■
Includes 4-40 threads
Stand-off with Board Lock Feature
For straight PCB connectors, available on Series 700
■
Allows shell grounding to board
■
Eliminates stress on filter terminations
■
Tin plated brass stand-off with snap-in feature
■
Available for .062" (1.57mm) or .093" (2.36mm)
thick boards
Grounding Bracket with Board Lock
For right angle mount PCB connectors, available
on Series 500 & 700
■
Metal bracket provides grounding
■
Snap-in, no hardware needed,
4-40 threads included
■
For use on .062" (1.57mm) thick boards
Gold Plating
Available on Series 600 & 700
■
High reliability applications,
50µ" (1.27 µm) gold over 50µ" (1.27 µm) nickel
Solder Dipped Tails
Available on Series 600 & 700 connectors
■
Solder dipped tails added to standard gold flash
Water Block
Consult API engineers for specifics.
■
Internally sealed in accordance with NEMA
Standard Rain Test section 6.4 (also UL50
part 28 ram test for submersion, section 6.10.1)
Threaded Inserts
Grounding Brackets
Stand-off with Board Lock
#4-40 UNC - 2B
2 places
.494
(12.55)
For .125 (3.18) Ø
mounting
hole
For .062 (1.57)
thick board
.170
(4.32)
Grounding Bracket with Board Lock
(see above for grounding bracket details)
Adapter Connector
Locking
Insert
4 Places 2 Places
Locking
Insert
Ø.125 (3.18)
thru (typ)
Flame
retardant
lead spacer
(Phenolic)
A
B
Ø.160 (4.06)
thru (typ)
.540
(13.72)
.265
(6.73)
.250 (6.35)
.375
(9.53)
#4-40 UNC-2B
eyelets (typ)
Connector
flange
Right angle
bracket
.086 (2.18)
Connector flange
Size
25
37
15
9
2.500 (63.50)
For .062 (1.57)
or .093 (2.36)
thick PC board
For .120 (3.05) dia.
mounting hole
.187
(4.75) dia.
stand-off
.440±.010
(11.18±.25))
1.852 (47.04)
1.312 (33.32)
.984 (24.99)
2.730 (69.34)
2.088 (53.04)
1.542 (39.17)
1.214 (30.84)
AB
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC40
Filtered Combo
D-Subminiature Connectors
API’s Spectrum Control line of filtered combo D-subs
provide high insertion loss with capacitive filtering. These
connectors are available with 20 Amp power contacts or
40 Amp power contacts. Configurations include male
and female versions with straight PC terminals, right
angle PC terminals or solder cup terminals. Standard
D-sub shell sizes provide intermateability with unfiltered
connectors. High strength epoxy potting protects
ceramic elements.
Capacitive filtering is available in 470, 820,
1000 and 1500 pF. Additional capacitance ranges
and configurations can be provided upon request.
Please consult factory for more information.
Applications
■
Telecommunications base station equipment
■
Switching and transmission equipment
■
Power supplies
■
Industrial equipment
■
Computer work stations
Mechanical Specifications
Shell . . . . . . . . . . . . . . . . . Steel, tin plated
Power Contacts . . . . . . . . .
Brass, gold plated .000030 in.
(0.762 µm) minimum
Signal Contacts . . . . . . . . . Pin: brass, gold plated
. . . . . . . . . . . . . . . . . . . . . .000015 in.
(0.762 µm)
min.
. . . . . . . . . . . . . . . . . . . . . Socket: copper alloy, gold plated
.000030 in.
(0.762 µm)
min.
Insulator . . . . . . . . . . . . . . Glass-filled polyester,
. . . . . . . . . . . . . . . . . . . . . flammability UL94V-0
Operating Temperature . . . . -55°C to +125°C
Capacitors . . . . . . . . . . . . . MLCC
Electrical Specifications
Operating Voltage . . . . . . . 200 VDC
Current Rating* . . . . . . . . . 40 Amp power/ 5 Amp signal
Insulation Resistance . . . . . 1 Gohm at 100 VDC
Capacitance . . . . . . . . . . . . See below for MLCC values.
. . . . . . . . . . . . . . . . . . . . . For other capacitance values
. . . . . . . . . . . . . . . . . . . . . contact factory.
Dielectric Withstanding
Voltage . . . . . . . . . . . . . . . 600 VDC
*30 Amp available. Consult factory.
Ordering Information
Example: 563A03W3101GBL9
56 * 3 A 03W3 101 GBL9
A: Pin - PCB Power
B: Pin - Right Angle Power
C: Pin - Solder Cup Power
G: Socket - PCB Power
H: Socket - Right Angle Power
J: Socket - Solder Cup Power
N: Custom Combination
Options
See options descriptions on page FC43 add suffix ending
LI = 4-40 UNC inserts
LIM = Metric M3.0 self-locking threads
GB = Metal bracket provides ground connection,
includes 4-40 self-locking threads (for right
angle mount only)
GBL = Grounded board lock (right angle)
GBL6 = for .062" boards (straight PCB mount)
GBL9 = for .093" boards (straight PCB mount
50G = 50 µ (1.27 µm) gold plating
S= Solder dipped tails
JS = Jackscrew mounting
For option combinations, consult factory.
Capacitance
Value
MLCC
201 = 470 pF
202 = 820 pF
203 = 1000 pF
204 = 1500 pF
Contact
Arrangement
03W3 = 3W3
05W5 = 5W5
09W4 = 9W4
24W7 = 24W7
* Insert “F” for RoHS compliant
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC41
Filtered Combo D-Subminiature Connectors
3W3
.269
(6.83)
Typ.
.995
(25.27)
.500±.015
(12.70±0.38)
.329
(8.36)
4-40 Clinch Nut
2 Plc. Mating Face
Epoxy
1.541±.015
(39.14±0.38)
1.312
(33.32)
1.134
(28.80)
.089
(2.26)
.130
(3.30)
4 Plc.
Ø .120
(3.05)
2 Plc.
1.312
(33.32)
Recommended Panel Cutout
.225
(5.72)
.449
(11.40)
100° Typ.
1 267122-1
.217
(5.50) .809±.025
(20.55±0.64)
.328±.021
(8.33±0.53)
.233±.006
(5.92±0.15)
.036±.010
(0.92±0.25)
Ø .128
(3.24)
Typ.
1.025
(26.04)
Max.
.055±.020
(1.40±0.51)
Contact
3 Plc.
Plug
Assembly
.425
(10.80)
Max.
Plug - Solder Cup
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC42
Filtered Combo D-Subminiature Connectors
3W3
.233±.006
(5.92±0.15)
.036±.010
(0.92±0.25)
.995
(25.27)
Plug Assembly
Contact
3 Plc.
.217
(5.50)
.269
(6.83)
Ty p .
.995
(25.27)
.500±.015
(12.70±0.38)
.329
(8.36)
Mating Face Epoxy
1.541±.015
(39.14±0.38)
1.312
(33.32)
.055±.020
(1.40±0.51)
.425
(10.80)
Max.
Ø .120
(3.05)
2 Plc.
ø .0625±.0010
(1.588±0.025)
2 Plc.
.500
(12.70)
2 Plc.
.125±.025
(3.18±0.64)
Ty p .
1.134
(28.80)
.089
(2.26)
.130
(3.30)
4 Plc.
Ø .120
(3.05)
2 Plc.
1.312
(33.32)
Recommended Panel Cutout
.225
(5.72)
.449
(11.40)
100° Typ.
.269
(6.83)
ø .004 (.01)
ø .077 (1.96)
3 Plc.
.269
(6.83)
Ty p .
.538
(13.66)
Plug - Right Angle
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC43
Filtered Combo D-Subminiature Connectors
5W5
1 93931-1
ø .128 (3.25)
Contact
5 Plc.
.228±.004
(5.79±0.10)
.042±.010
(1.07±0.25)
.217
(5.51)
.645
(16.38)
2 Plc.
.125±.025
(3.175±0.64)
1.040
(26.42)
5 Plc. Rear
Shell
1.535
(38.99)
1.852
(47.04)
2.090±.015
(53.09±0.38)
4-40 UNC
Standoff
2 Plc.
.330
(8.38)
.500±.015
(12.70±0.38)
ø .010 (0.25)
ø .140 (3.56)
.356
(9.04)
Recommended PCB Layout
.624
(15.85)
.892
(22.66)
1.160
(29.46)
1.496
(38.00)
.00
(.000)
1.852
(47.04)
ø .010 (0.25)
ø .125 (3.56)
2 Holes
Plug - Vertical
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC44
Filtered Combo D-Subminiature Connectors
9W4
Recommended Panel Cutout
.225
(5.72)
.112
(2.84)
.089
(2.26)
1.674
(42.51) 10° Typ.
1.852
(47.04)
ø .120
(3.05)
2 Holes
.132
(3.35)
Ty p .
.242±.004
(6.15±0.10)
.036±.010
(0.92±0.25)
1
.941±.025
(23.90±0.64)
T
yp.
.447±.021
(11.35±0.53)
Front Shell
Solder Cup
5 Plc.
Power Contact
4 Plc.
.223±.021
(5.66±0.53)
Insert Mating Face
M21
543
A2 A1A3
2.090±.015
(53.09±0.38)
1.852
(47.04)
1.510
(38.35)
.112
(2.84)
.056
(1.42)
.310
(7.87)
.606±.015
(15.39±0.38)
.570 (14.48)
.379 (9.63)
.325 (8.25)
.271 (6.88)
.217 (5.51)
.163 (4.14)
0
.306 (7.77)
.570 (14.48)
.055±.020
(1.40±0.51)
Rear
Shell
4-40 Clinch Nuts
2 Plc.
Signal Contact
5 Plc.
ø .062±.001
(1.57±0.03)
5 Plc.
ø .128±.003
(3.25±0.08)
4 Plc.
Socket - Solder Cup
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC45
Filtered Combo D-Subminiature Connectors
9W4
.056 (1.42)
.000 (0.00)
Recommended Panel Cutout
.225
(5.72)
.112
(2.84)
.089
(2.26)
1.674
(42.51) 10°
Ty p .
1.852
(47.04)
ø .120
(3.05)
2 Holes
.132
(3.35)
Ty p .
ø .010 (0.25)
ø .140 (3.56)
.326 (23.52)
ø .010 (0.25)
ø .125±.003
(3.18±0.08)
.570 (14.48)
.306 (7.77)
.570 (14.48)
.326 (23.52)
.271 (6.88)
.217 (5.51)
.163 (4.14)
.325 (8.25)
.379 (9.63)
.056 (1.42)
2 Plc.
Posn. 1
4 Plc.
ø .004 (0.10)
ø .055 (1.40)
5 Plc.
Recommended PC Board Mounting Dimensions
Insert Mating Face
M21
543
A2 A1A3
2.090±.015
(53.09±0.38)
1.852
(47.04)
1.510
(38.35)
.112
(2.84)
.056
(1.42)
.310
(7.87)
.606±.015
(15.39±0.38)
.570 (14.48)
.379 (9.63)
.325 (8.25)
.271 (6.88)
.217 (5.51)
.163 (4.14)
0
.306 (7.77)
.570 (14.48)
.055±.020
(1.40±0.51)
Rear
Shell
4-40 Standoff
2 Plc.
.242±.004
(6.15±0.10)
.036±.010
(0.92±0.25)
1
.891±.025
(22.63±0.64)
Ty p .
Front Shell
.397±.021
(10.08±0.53)
5 Plc.
Boardlock
2 Plc.
ø .040±.002
(1.02±0.05)
5 Plc.
Signal
Contact
5 Plc.
ø .128±.003
(3.25±0.08)
4 Plc.
Power Contact
4 Plc.
.383±.021
(9.72±0.53)
4 Plc.
.325
(8.26)
.300
(7.62)
2 Plc.
Socket - Vertical
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC46
.926
(23.52)
1.140
(28.96)
1.852
(47.04)
.042±.010
(1.07±0.25)
.228±.004
(5.79±0.10)
.560
(14.22)
2 Plc.
.240
(6.10)
Power Pin
4 Plc.
Signal Pin
5 Plc.
L Bracket
2 Plc.
Threaded Fastener
2 Plc.
Lockwasher
2 Plc.
Screwlock
2 Plc.
.040
(1.02)
5 Plc.
A1 A2 A3 A4
12
345
Mating
Face
1.535
(38.99)
2.090±.015
(53.09±0.38)
.330
(8.38) .500±.015
(2.70±0.38)
Epoxy
.128±.002
(3.25±0.05)
4 Plc. 1.852
(47.04)
.055±.020
(1.40±0.51) Rear Shell
Front
Shell
.262
(6.65)
.216
(5.48)
2 Plc.
.270
(6.86)
.056
(1.41)
3 Plc. .056
(1.41)
2 Plc.
.500
(12.70)
4 Plc.
.125±.025
(3.18±0.64)
Ty p .
Boardlock
2 Plc.
.264
(6.71)
ø .010 (0.25)
ø .125±.003
(3.18±0.08)
2 Plc.
Recommended PC Board Mounting Dimensions
.570
(14.48)
.841
(21.36)
.054
(1.37)
4 Plc.
.056
(1.42)
Ty p .
.112
(2.84)
Ty p .
.230
(5.84)
4 Plc.
ø .006 (0.15)
ø .055±.003
(1.40±0.08)
5 Plc.
ø .006 (0.15)
ø .143±.003
(3.63±0.08)
4 Plc.
Plug - Right Angle
Dimensions in inches (mm)
Filtered Combo D-Subminiature Connectors
9W4
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC47
Filtered Combo D-Subminiature Connectors
24W7
2.406
(61.11)
Ø .120
(3.05)
2 Plc.
Recommended Panel Cutout
100° Typ.
.132
(3.35)
4 Plc.
.278
(7.06)
2 Plc.
.555
(14.10)
2.218
(56.34)
.094
(2.39)
Ty p .
.036±.010
(0.92±0.25)
.988±.025
(25.09±0.61)
T
yp.
.242±.004
(6.15±0.10)
Front Shell Mating Face
4-40 Clinch Nuts
2 Plc.
Power Contact
2 Plc.
Solder Cup
17 Plc.
Rear
Shell
.109
(2.76)
Ty p .
A4
17
2.063
(52.40)
2.638±.015
(67.01±0.38)
.606±.015
(15.39±0.38)
Insert
2.406
(61.11)
A5A6A7 A3 A2 A1
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
.270
(6.86)
T
yp.
.112
(2.84)
Ty p .
.056
(1.42)
T
yp.
.422
(10.72)
.055±.020
(1.40±0.51)
.323±.021
(8.20±0.53)
ø .128±.003
(3.25±0.08)
7 Plc.
ø .494±.021
(12.55±0.53)
17 Plc.
ø .062±.001
(1.57±0.03)
17 Plc.
Signal Contact
17 Plc.
Socket - Solder Cup
Dimensions in inches (mm)
Only represents a few of our available configurations. Consult factory for more information.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC48
D-Subminiature
Adapter Test Kit & Hardware
Adapter Test Kit
Adapter Test Kit
Specially designed for EMI evaluation process
■
Male/female adapter part
■
Easily plugged into equipment under
testing conditions
■
Ideal for new products and retrofitting
■
Each adapter test kit includes:
■
20 filtered adapters
■
Four shell sizes 9, 15, 25 and 37
■
Four filter ranges:
Series 700
- 310 pF Pi
- 830 pF FT
- 1000 pF Pi
- 4000 pF Pi
Hardware
Designed to provide simple and effective mounting
Hexagonal Spacer
■
Tapped spacer fits between flanges
■
Provide retrofit of 4-40" threads
■
Two spacers per adapter required,
packaged in bulk
Jackscrew Mounting Hardware
■
Male/female jackscrews
■
Standard 4-40 threads for compatibility
■
Two male thread lengths available
■
Two screws per adapter required
■
Lockwasher included, packaged in bulk
Ordering Information
Hexagonal Spacer
Adapter
Hexagonal
Spacer
#4-40 UNC
Thru-hole
Description API Part Number
Hexagonal Spacer
Jackscrew Mounting Hardware
For .312" (7.92 mm) length
Adapter test kit with Jackscrew
Includes 40 pcs. 56-201-006
Jackscrew Mounting Hardware
For .688" (17.47 mm) length
Adapter test kit 56-700-002
56-700-002-JS
56-201-001 (1 per)
56-201-004 (1 per)
56-201-006 (2 per)
Tubular Spacer 56-201-003 (1 per)
.120 Thru-hole
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Micro D Series
Filtered Connectors
FC49
Ordering Information
Example: 56-F011-110-JP
Filtered
Connectors
RoHS
Compliant
Shell Size/
Number of
Contacts
0- 9 contacts
1-15 contacts
2-21 contacts
3-25 contacts
4-31 contacts
5-37 contacts
Contact Type/Termination
1 - Pin to solder cup
2 - Pin to right angle*
3 - Socket to PC tail*
4 - Socket to right angle*
6 - Socket to solder cup
7 - Pin to PC tail*
8 - Pin to pigtail
9 - Socket to pigtail
Line Filtering
1 - All positions same
2 - Select load
Options
JP - #2-56 jack post
JS - #2-56 jackscrew
TI - Threaded insert
JT - Jack post and
threaded insert
GB- Grounding Bracket
Capacitance
Value/Type
High Performance
01 - 100 pF FT
02 - 470 pF FT
03 - 820 pF FT
04 - 1500 pF FT
05 - 4700 pF FT
Standard
Performance
10 - 100 pF COB
11 - 470 pF COB
12 - 820 pF COB
13 - 1500 pF COB
14 - 4700 pF COB
All capacitance values ±20% @ 25°C
56 F011 - 110 - JP
For designs that require even smaller connector
packages, API’s Spectrum Control brand has designed
a line of filtered Micro D-Subminiature connectors.
This line of connectors offers a range of reliable
filtering options, including capacitive and ESD versions,
and several sizes and termination options. API has
a Micro D-sub connector to satisfy your smallest
space constraints.
Features
■
Light weight
■
Compact size
■
Environmentally sealed contact area when mated
■
Corrosion resistant
■
Durable (500 cycles min.)
■
Superior electrical performance
■
RoHS compliant
Mechanical Specifications
Shell . . . . . . . . . . . . . . . Aluminum, electroless nickel
. . . . . . . . . . . . . . . . . . . plated 500 µ in (12.7 µm) minimum
Insulator . . . . . . . . . . . . High temperature plastic,
. . . . . . . . . . . . . . . . . . . flammability UL94V-0
Contacts . . . . . . . . . . . . Copper alloy, gold plated 50 µ in
. . . . . . . . . . . . . . . . . . . (1.27 µm) minimum
Potting . . . . . . . . . . . . . Flammability UL94V-0
Interfacial Seal . . . . . . . . Silicon
Electrical Specifications
Operating Voltage . . . . . 100 VDC
Dielectric
Withstanding Voltage . . . 300 VDC
Current Rating. . . . . . . . 3 Amps
Insulation Resistance . . . 5G ohms @ 100 VDC
Micro D
This part number represents a micro D-sub connector with a shell size of 15
and a pin to solder cup configuration. All lines are filtered with same capaci-
tance value, which is 100 pF COB. The connector includes an optional #2-56
jack post.
* Right angle and PC tail length is 0.109. Other lengths available, consult factory.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC50
Micro D Series Filtered Connectors
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
5
MHz
Capacitance
ToleranceValue 10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
Working
Voltage DC
-55°C to
+125°CType
Filter
Designation
01
02
03
04
05
FT
FT
FT
FT
FT 4700 pF
1500 pF
820 pF
470 pF
100 pF ±20% 300V 100V
100V
100V
100V
100V
—
—
—
—
—
—
2
—
2
—
8
6 13
18
28
1
14
19
24
34
6
20
25
30
40
14
28
33
38
48
20
34
39
44
54
5 10
208 14
300V
300V
300V
300V
±20%
±20%
±20%
±20%
Dielectric
Withstanding
Voltage
High Performance
Minimum Insertion Loss - Decibels (dB)
50 ohm system per MIL-STD-220 (no load)
5
MHz
Capacitance
ToleranceValue 10
MHz
20
MHz
50
MHz
100
MHz
200
MHz
500
MHz
1
GHz
Working
Voltage DC
-55°C to
+125°CType
Filter
Designation
10
11
12
13
14
COB
COB
COB
COB
COB 4700 pF
1500 pF
820 pF
470 pF
100 pF ±20% 300V 100V
100V
100V
100V
100V
—
—
—
—
—
—
2
—
2
—
8
6 13
18
28
1
14
19
24
32
6
20
25
30
32
14
28
32
32
32
20
32
32
32
32
5 10
208 14
300V
300V
300V
300V
±20%
±20%
±20%
±20%
Dielectric
Withstanding
Voltage
Standard Performance
Right Angle PCB
Receptacle
Plug
Dimensions in inches (mm)
A
Size
BC
(RCPT)
FGC
(Plug)
DE H
9.775 .565 .388 .330 .390 45
.200 .250
(19.69) (14.35) (9.86) (8.38) (9.91) (5.08) (6.35)
15 .925 .715 .538 .480 .540 78
.350 .400
(23.50) (18.16) (13.67) (12.19) (13.72) (8.89) (10.16)
21 1.075 .865 .688 .630 .690 10 11 .500 .550
(27.31) (21.97) (17.48) (16.00) (17.53) (12.70) (13.97)
25 1.175 .965 .788 .730 .790 12 13 .600 .650
(29.85) (24.51) (20.02) (18.54) (20.07) (15.24) (16.51)
31 1.325 1.115 .938 .880 .940 15 16 .750 .800
(33.66) (28.32) (23.83) (22.35) (23.88) (19.05) (20.32)
37 1.475 1.265 1.088 1.030 .1.090 18 19 .900 .950
(37.47) (32.13) (27.64) (26.16) (27.69) (22.86) (24.13)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Micro D Series
Filtered Connectors
FC51
Dimensions in inches (mm)
A
Size
BC
(RCPT)
C
(Plug)
D
9.775 .565 .388 .330 .390
(19.69) (14.35) (9.86) (8.38) (9.91)
15 .925 .715 .538 .480 .540
(23.50) (18.16) (13.67) (12.19) (13.72)
21 1.075 .865 .688 .630 .690
(27.31) (21.97) (17.48) (16.00) (17.53)
25 1.175 .965 .788 .730 .790
(29.85) (24.51) (20.02) (18.54) (20.07)
31 1.325 1.115 .938 .880 .940
(33.66) (28.32) (23.83) (22.35) (23.88)
37 1.475 1.265 1.088 1.030 .1.090
(37.47) (32.13) (27.64) (26.16) (27.69)
Vertical PCB
Receptacle
Plug
Solder Cup
Receptacle
Plug
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC52
Micro D Series Filtered Connectors
Options
JP - #2-56 Jack Post M83513/05-07 JS - #2-56 Jack Screw M83513/05-05
TI - Threaded Insert Receptacle TI - Threaded Insert Plug
GB - Ground Bracket Receptacle GB - Ground Bracket Plug
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Micro D Series Filtered Connectors
Board and Panel Cutouts
FC53
9 Contacts 15 Contacts 21 Contacts
25 Contacts 31 Contacts 37 Contacts
9 Contacts 15 Contacts 21 Contacts
25 Contacts 31 Contacts
37 Contacts
Vertical PCB Layouts
Pin Connector Shown
Notes: PC Tail Diameter 0.018 ±0.002 (0.46 ±0.05) Contact numbers shown are pin connector.
Reverse for socket. Patterns shown are for connector mounting side of PC board.
Right Angle PCB Layouts
Pin Connector Shown
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Filtered Miniature
Ribbon Connectors
Filtered miniature ribbon connectors are fully intermateable
and interchangeable with existing standard product. Rugged
design construction and predictable capacitive filter
performance is available in right-angle and male/female
adapter versions.
Applications for this type of connector are widely
diversified and include all phases of the telecommunications
industry including original telephone manufacturing, operating
telephone companies, cable reclamation, cable manufacturing
and bay connectorization. The filtered miniature ribbon
connector line is also ideally suited for use in printers,
computer terminals, test equipment, business and copying
machines, telemetering, and various equipment used in
the security industry.
Features
■
Lower installed cost
■
Assists with FCC Part 15; available for Part 68
requirements
■
Applicable for VDE specifications 0871, 0875-0878,
Vfg Federal Regulations and VCCI noise requirements
■
Drop-in replacement, matched footprint
■
All circuit lines filtered
■
Connector body is recognized under the
Component Recognition Program of Underwriters
Laboratories, Inc.
■
Plastic components are UL94V-0 rated
■
Connector body is certified by Canadian Standard
Association
40
35
30
25
20
15
10
5
01 MHz 10 MHz 100 MHz 1 GHz
Frequency
Insertion Loss (dB)
820 pF
470 pF
220 pF
100 pF
Typical Insertion Loss
Mechanical Specifications - Adapter
Shell . . . . . . . . . . . . . . . . . Zinc
Thermoplastic
Insert. . . . . . . . . . . . . . . . . Black, high strength
Contacts . . . . . . . . . . . . . . Copper alloy
Contact Plating . . . . . . . . . 30uin (.76um) (min.)
. . . . . . . . . . . . . . . . . . . . . gold over nickel
Electrical Specifications
Operating
Temperature . . . . . . . . . . . . -55°C - 105°C
Dielectric
Withstanding
Voltage . . . . . . . . . . . . . . . 1000 VAC min per
. . . . . . . . . . . . . . . . . . . . . (FCC Part 68 test)
Capacitance . . . . . . . . . . . . 100 pF, 220 pF, 470 pF,
. . . . . . . . . . . . . . . . . . . . . 820 pF, ±15% (adapter),
. . . . . . . . . . . . . . . . . . . . . ±20% (connector)
Dissipation Factor . . . . . . . 2.5% max (adapter)
. . . . . . . . . . . . . . . . . . . . . 5% max (connector)
Mechanical Specifications - Connector
Shell . . . . . . . . . . . . . . . . . Steel, tin plated
Thermoplastic
Insert. . . . . . . . . . . . . . . . . Blue, 30% glass filled
Contacts . . . . . . . . . . . . . . Phosphor bronze
Contact Plating . . . . . . . . . Gold flash (<10 µ in) over nickel
FC54
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC55
Filtered Miniature Ribbon Connectors
50 Position
Pin
Contact
(plug)
Dimensions in inches (mm)
Part Number
56-882-004
56-882-005
56-882-003
56-882-002
470 pF, ±20%
820 pF, ±20%
220 pF, ±20%
100 pF, ±20%
Capacitance Value
.450
(11.43) MAX
2 PLC
.085
(2.15)
2 PLC
.169 ± .003
(4.29 ± 0.08)
ø.035 ± .002
(0.89 ± 0.05)
50 PLC
.453
(11.50)
.085
(2.16)
TYP
Recommended PCB Layout
2.946
(74.84)
2.041
(51.84)
PCB Edge
ø .126 ± .002
(3.20 ± 0.05)
2 PLC
Filter
2.949 ± .010
(74.90 ± 0.25)
Top
3.264 ± .015
(82.90 ± 0.38) Screw
#4-40 thread
2 PLC
.610 ± .015
(15.50 ± 0.25)
.305 ± .010
(7.75 ± 0.25)
TYP
Boardlock
2 PLC
Contact
50 PLC
.025
(0.64)
TYP
.085 ± .010
(2.16 ± 0.25)
TYP
.155
(3.94)
.531
(13.50)
Shell Mating Face
.559
(14.21)
Pin Organizer
Filter
Position 1
ø.130
(3.30)
2 PLC
Bottom
.478 ± .010
(12.14 ± 0.25)
2 PLC
1
26
25
50
100˚ TYP
2.589
(65.75)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
Filtered Miniature Ribbon Connectors
50 Position
Socket
Contact
(receptacle)
Dimensions in inches (mm)
Part Number
56-886-004
56-886-005
56-886-003
56-886-002
470 pF, ±20%
820 pF, ±20%
220 pF, ±20%
100 pF, ±20%
Capacitance Value
Filter
2.949 ± .010
(74.90 ± 0.25)
Top
Spring Latch
2 PLC
Shown in this
view only
.450
(11.43) MAX
2 PLC
.085
(2.15)
2 PLC
.169 ± .003
(4.29 ± 0.08)
ø.035 ± 002
(0.89 ± 0.05)
50 PLC
.453
(11.50)
.085
(2.16)
TYP
Recommended PCB Layout
2.946
(74.84)
2.041
(51.84)
PCB Edge
ø.126 ± 0.02
(3.20 ± 0.05)
2 PLC
Shell Mating Face
.559
(14.21)
Pin Organizer
Filter Position 1
.126
(ø3.20)
2 PLC
Bottom
.478 ± .010
(12.14 ± 0.25)
2 PLC
3.264 ± .015
(82.90 ± 0.38)
100˚ TYP
Screw
#4-40 thread
2 PLC
.610 ± .015
(15.50 ± 0.25)
.305 ± .010
(7.75 ± 0.25)
TYP
Boardlock
2 PLC
CONTACT
50 PLC
.025
(0.64)
TYP
.085 ± .010
(2.16 ± 0.25)
TYP
.164
(4.17)
.465
(11.81)
1
26
25
50
2.511
(63.77)
FC56
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC57
Filtered Miniature Ribbon Connectors
50 Position
Adapter
Dimensions in inches (mm)
Part Number
56-889-004
56-889-005
56-889-003
56-889-002
470 pF ±15%
820 pF ±15%
220 pF ±15%
Hardware options also available. Consult factory for more information.
100 pF ±15%
Capacitance Value
3.270
(83.06)
2.950
(74.93)
2.040
(51.82)
.680
(17.27)
2.637
(66.98)
.300
(7.62)
.595
(15.11)
.780
(19.81)
1.400
(35.56)
Max.
.453
(11.51)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC60
Hooded Strain Reliefs
Ordering Information and Dimensions
Dimensions in inches (mm)
Part
Number
2560-9000-01
2560-9001-01
2560-9000-02
2560-9001-02
2560-9000-03
2560-9001-03
2560-9000-04
2560-9001-04
0.984 1.228 1.710 0.985 .685 .240
9(24.99) (31.19) (43.43) (25.02) (17.40) (6.07)
1.312 1.556 1.710 1.310 .685 .300
15 (33.33) (39.52) (43.43) (26.71) (17.40) (7.62)
1.852 2.103 1.710 1.850 .685 .400
25 (47.04) (53.42) (43.43) (46.99) (17.40) (10.16)
2.500 2.744 1.710 2.500 .685 .400
37 (63.50) (69.70) (43.43) (63.50) (17.40) (10.16)
Con-
nector
Size
A
±.005
B
Max
C
Max
D
Max
E
Max
F
Max
Hooded strain reliefs are used whenever a connector
is used on a cable assembly which will be exposed
to users and subject to multiple disconnects. Hoods
are designed to protect users from shock hazard by
exposed solder joints, as well as provide a strain relief
for the wires and protection against accidental short
circuits.
Since most filter connectors are larger than
standard connectors, there had been a problem fitting
most commercially available hoods. Spectrum Control
solves this problem. Our hoods are molded of thin wall
plastic, providing extra internal space to accommodate
larger filter connectors. The hood is constructed of
extremely durable polycarbonate and meets the
flammability requirements for UL94V-0.
In addition, hoods are ideal for use on applications
which require the use of extra components such as
resistors or varistors on the wires. The nonconductive
hood conveniently houses the connector, components,
and protects any joints.
■
2560-9000-XX is supplied with metal retention
clips to hold the connector within the hood
assembly. This item is recommended for use
with Spectrum Filtered D-subs, most other filtered
D-subs, and most standard D-subs.
■
2560-9001-XX is meant to be used with a
connector which has a special eyelet on the
mounting flange. This feature is available as an
option on the Spectrum Filtered D-sub. Contact
factory for additional information.
#2560-9000-XX
Retention Clip
Version
(For use with most
connectors)
Hood
Captive
Screw
Clip
Connector
Flange
Hood
Captive
Screw
Eyelet
Connector
Flange with
Optional
Eyelet
#2560-9001-XX
“Eyelet”
(For use with “Eyelet”
connectors)
E
Cable Tie
(Not Supplied)
C
D
A
B
F
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC61
Custom Engineered
Solutions
Special Mounting
Flanges & Value-added
Custom Filter
Arrangements & Connectors
VDE RS232
connector
Tempest VGA
connector
adapter
FCC VGA
connector
adapter
Despite the breadth of our filtered connector product
line, there exist certain applications which demand a
custom EMC solution. Our engineering staff will work
with your design team to provide a custom filtered
connector which meets your individual requirements.
Examples of custom projects are shown below.
Special Mounting Flanges
■
Housings can be designed to be integrated into
the customer’s equipment. The housings are
constructed of machined materials, or precision
diecast zinc.
Value-added Assemblies
■
API’s capabilities extend beyond just
supplying filter connectors. Additional operations
such as sourcing and assembling flexible circuits,
adding flying leads, or making connector to
connector assemblies, all can be provided in
conjunction with the filter connector.
Custom Filter Arrangements
■
Complex filters involving unbalanced Pi types,
LC types with large inductive components, special
pin-in to pin-out translations, and overvoltage
protective devices such as diodes and varistors
can be packaged within the connector.
Other Connector Formats
■
Manufacturer specific connectors also can be
filtered. Our involvement ranges from complete
design to implementing minor modifications
to include the addition of the filter components.
Medical equipment and hand-held devices
are examples of excellent applications
for these connectors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC62
Filtered Connector Performance Specifications
The filtered D-subminiature connectors shown in
this catalog have been designed and tested to the
following test plan.
Order
of
Test
Test
Group
Examination
of Test
Materials, Designs
Construction and
Workmanship
Mating and Unmating Force
Vibration
No interruption of current flow longer than
1 microsecond. Insulation resistance greater
than 5000 megohms.
MIL-C-24308, Para. 3.5.4
MIL-C-24308, Para. 3.5.4
Table II
Limits: Shell size 1-5, class G only.
In accordance with applicable requirements.2
2
1
2
3
1 Life
Shock
Visual and Mechanical
Examination
Physical Dimensions
and Marking
Dielectric Withstanding
Voltage
Contact Engagement
and Separation
MIL-STD-202
Method 305 1 KHz, 1VRMS max. 25°C
MIL-STD-202
Method 301
MIL-STD-202
Method 302, test condition at rated voltage
Maximum engagement force 18.0 oz., minimum
separation force 0.7 oz.
MIL-STD-220
No load
MIL-C-24308, Para. 3.5.16, 4.7.18, except 100
cycles
MIL-STD-202
Method 107, Test condition B, -55°C to +125°C
MIL-STD-202
Method 106, less step seven
MIL-STD-202
Method 210, Test condition D
MIL-STD-202
Method 204, Test condition D, 100 mA, current
MIL-STD-202
Method 213.
Test Condition G,
100 mA, current
MIL-STD-202
Method 108, Test condition D, within 125%
of rated voltage at the maximum operating
temperature.
Filter shall meet all initial requirements except
insulation resistance shall not be less than 500
megohms.
Mounting Inserts
a. Prevailing torque
(locking)
b. Installation torque
(locking)
c. Push-out Force
a. 3 inch-pounds max.
b. 6 inch-pounds without damage
c. 10 pounds axial force without loosening insert
IFI-100
Resistance to Soldering
Heat
No evidence of damage.
Insulation resistance not less than 2500 megohms.
Insulation resistance not less than 500 megohms.
Meet dielectric withstanding voltage requirements.
No interruptions of current flow longer than
1 microsecond.
Insulation resistance not less than 500 megohms.
Meet dielectric withstanding voltage requirements.
MIL-C-24308, Para. 3.5.9
Contact resistance at 1 amp. 20 millohms max.
1
3
I
II
III
IV
4
5
6
7
1
3
4
5
6
7
Capacitance
Insulation Resistance
Durability
Thermal Shock
Solderability
Moisture Resistance
Insertion Loss
MIL-C-24308, Para. 3.5.10
MIL-STD-202; Method 208, RMA-Flux Terminals shall meet solderability requirements.
Contact resistance at 1 amp. 15 millohms max.
Capacitance within specified limits.
Insulation resistance greater than 2500 megohms.
WIthin specified tolerance.
No breakdown or damage.
5000 megohm minimum.
In accordance with applicable requirements.
Test Method
Post Test
Requirements
The information shown can be used as a basis for
your filtered connector specifications. (Contact API
for additional details.)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
E
I
B
F
G
J
D
A
C
H
E
B
F
G
J
D
A
C
H
.590
(14.99)
.315
(8.00)
I
Printed Circuit
Vertical Board Mount (standard density)
Printed Circuit
Right Angle Mount (standard density)
Board Layout (Pin and Socket Contact) for Standard D-Sub Connectors
Panel Cutouts (Front or Rear Mounting)
for Standard and High-Density D-Sub Connectors
Shell I
Size AB C DEFGH
(Dia.) J
.984 .436 = 4 x .109 .327 = 3 x .109 .492
9 (0) (25.00) (11.07) (2.77) (8.31) (2.77) (12.50)
1.312 .763 = 7 x .109 .654 = 6 x .109 .656
15 (1) (33.32) (19.38) (2.77) (16.61) (2.77) (16.66)
1.852 1.308 = 12 x .109 1.199 = 11 x .109 .926 .109 .112 .125 .045 .054
25 (2) (47.04) (33.22) (2.77) (30.45) (2.77) (23.52) (2.77) (2.84) (3.18) (1.14) (1.37)
2.500 1.962 = 18 x .109 1.853 = 17 x .109 1.250
37 (3) (63.50) (49.83) (2.77) (47.07) (2.77) (31.75)
2.406 1.744 = 16 x .109 1.635 = 15 x .109 1.203
50 (4) (61.11) (44.30) (2.77) (41.35) (2.77) (30.56)
2 rows 1 row
ABCDEFG
Shell ±.015 ±.015 ±.015 ±.015 ±.003 ±.005 ±.002
Size (.38) (.38) (.38) (.38) (.08) (.13) (.05)
.984 .492 .777 .388 .440 .220 .150
9 (0) (24.99) (12.49) (19.74) (9.87) (11.18) (5.59) (3.81)
1.312 .656 1.105 .552 .440 .220 .150
15 (1) (33.32) (16.66) (28.07) (14.03) (11.18) (5.59) (3.81)
1.852 .926 1.645 .822 .440 .220 .150
25 (2) (47.04) (23.52) (41.78) (20.89) (11.18) (5.59) (3.81)
2.500 1.250 2.293 1.146 .440 .220 .150
37 (3) (63.50) (31.75) (58.24) (29.12) (11.18) (5.59) (3.81)
2.406 1.203 2.190 1.095 .550 .275 .150
50 (4) (61.11) (30.55) (55.63) (27.81) (13.97) (6.98) (3.81)
Dimensions in inches (mm)
Panel Cutouts
Front
Mounting
Rear
Mounting
Panel Panel
10°
F
E
D
C
G
B
A
.125 Dia.
(3.18 Dia.)
2 holes
FC63
Board & Panel Cutouts
PCB
Mount
.056 (1.42)
PCB
Mount
Rt Angle
.275 (6.99)
0.112
2 rows
0.00
1 row
Front of Flange
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
FC64
Board & Panel Cutouts
Dimensions in inches (mm)
15 High-Density
Pin/PCB
.040 (1.02) Ø
15 holes
.040 (1.02) Ø
15 holes
.040 (1.02) Ø
62 holes .040 (1.02) Ø
62 holes
.040 (1.02) Ø
78 holes
.040 (1.02) Ø
44 holes .040 (1.02) Ø
44 holes
.040 (1.02) Ø
15 holes
.040 (1.02) Ø
15 holes
.125 (3.18) Ø
2 holes
.090 (2.29)
Typ.
.090
(2.29)
Typ.
.095
(2.41)
Typ.
.095
(2.41)
Typ.
.095
(2.41)
Typ.
.090
(2.29)
Typ.
.090
(2.29)
Typ.
.090 (2.29)
Typ.
.090
(2.29)
Typ.
.078 (1.98)
Typ.
.078 (1.98)
Typ.
.078 (1.98)
Typ.
.078 (1.98)
Typ.
.082 (2.08)
Typ.
.041 (1.04)
.078 (1.98)
Typ. .078 (1.98)
Typ.
.100 (2.54)
Typ.
.078 (1.98)
Typ.
Connector C
L
Connector C
L
Connector C
LConnector C
LConnector C
L
Connector C
LConnector C
L
Connector
Front Face
of Connector
Flange
C
LConnector C
L
.045
(1.14)
.045
(1.14) .045
(1.14) .045
(1.14)
.045
(1.14)
.045
(1.14)
.020
(.51)
.450
(11.43)
.010
(.25)
.010
(.25)
1
1
1
1
1
1
1 (Pin/PCB)
1 (Socket/
PCB)
1
1
15 High-Density
Socket/Right Angle
26 High-Density
Pin/PCB
26 High-Density
Socket/PCB
44 High-Density
Pin/PCB
44 High-Density
Socket/PCB
62 High-Density
Pin/PCB
62 High-Density
Socket/PCB
78 High-Density
Socket/PCB
Pin/PCB
.020
(.51)
.023
(.58)
.023
(.58)
.0475
(1.21)
.0475
(1.21)
.020
(.51)
.020
(.51)
