Raspberry Pi Power Supply
Features:
Built specifically for use with Raspberry Pi
Class II design 5vdc 1A output via Micro USB
Energy efficient to MEPS V
ĞƐĐƌŝƉƟŽŶ
A 5vdc 1A Australian Micro USB power supply is manufactured
specifically for use with the Raspberry Pi device. It offers a highly
Ğĸ ĐŝĞŶƚŽƵƚƉƵƚŵĞĞƟŶŐůĂƚĞƐƚƐƚĂŐĞϮ;s ͿƌĞƋƵŝƌĞŵ ĞŶƚƐĂŶĚŝƐ
safety approved. This unit has fixed Australian pins and features short
ĐŝƌĐƵŝƚĂŶĚŽǀ ĞƌĐƵƌƌĞŶƚƉƌŽƚĞĐƟŽŶĂƐƐƚĂŶĚĂƌĚ dŚŝƐZĂƐƉďĞƌƌLJWŝ
power supply has M.T.B.F of 50K hours at 25 degrees C.
Part Number RPI-PSU-AU-MK1
Output 5vdc 1A maximum
Current Min. 0.01A
WŽǁ Ğƌ;ǁ ĂƩ ƐͿ 5W
Line Reg +/-5% at rated load
dŽƚĂůK ƵƚƉƵƚZĞŐƵůĂƟŽŶ +/-5 % at 0—100% load
Ripple & Noise (mV p-p) 200mV P-P
WƌŽƚĞĐƟŽŶƐ Over Current and Short Circuit
Case Size 54 x 24 x 38mm
Weight (approx.) 70g
DC Cord 1.8 Metres
DC Plug Micro USB
Rated Input Voltage 100-240Vac
Full Input Voltage Range 90-264Vac
Rated Frequency 50-60Hz
Full Frequency Range 47-63Hz
Efficiency 69.0%
Leakage Current shall not exceed 0.25mA
Input Power 7.72W max
Input Current (RMS Max.) 0.18A max
Hi-Pot Spec 3000Vac 10mA 1 min. (I.P. to O.P.)
E ŽůŽĂĚƉŽǁ ĞƌĐŽŶƐƵŵƉƟŽŶ 0.3W max
K ƉĞƌĂƟŶŐdĞŵƉĞƌĂƚƵƌĞ 0 to 40 degrees C
Storage Temperature -20 to 80 degrees C
K ƉĞƌĂƟŶŐ, ƵŵŝĚŝƚLJ 10% to 90%
Safety Approvals AS/NZS60950.1
EMC Standards EN55022:2006+A1:2007
/ EN6100-3-2 / EN6100-3-3
Pb-free Yes RoHS Compliant
MTBF 50K Hours at 25 degrees C
See mechanical drawing and DC cable drawing on page 2.
Full spec sheet on this PSU is available on request. Premier Farnell Ltd accepts
ŶŽƌĞƐƉŽŶƐŝďŝůŝƚLJĨŽƌƚLJƉŽŐƌĂƉŚŝĐĂůĞƌƌŽƌƐŝŶƚŚĞƉƌŽ ĚƵĐƟŽŶŽĨƚŚŝƐůĞĂŇĞƚ
WƌŽĚƵĐƚƐƉĞĐŝĮ ĐĂƟŽŶƐĂƌĞƐƵďũĞĐƚƚŽĐŚĂŶŐĞǁ ŝƚŚŽƵƚŶŽ ƟĐĞ