Technical Data Sheet 0603 Package Chip LED (0.6mm Height) 19-213SUBC/S400-A5/S208-2/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain with in RoHS compliant version. Descriptions The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Part No. Emitted Color Resin Color Blue Water Clear Material 19-213SUBC/S400-A5/S208-2/TR8 InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 10 Device No. : DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 11.0 ----- 29.0 mcd Viewing Angle 21/2 ---- 120 ---- deg Peak Wavelength p ---- 468 ---- nm Dominant Wavelength d 469.5 ---- 475.5 nm ---- 25 ---- nm Forward Voltage VF 2.70 ---- 3.10 V Reverse Current IR ---- ---- 50 A Spectrum Radiation Bandwidth Condition IF =5mA VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05 V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Bin Range Of Dom. Wavelength Bin Min Max Unit Condition 2 469.5 475.5 nm IF=5mA Unit Condition mcd IF=5mA Unit Condition V IF=5mA Page: 4 of 10 Bin Range Of Luminous Intensity Bin Min Max 1 11.0 15.0 2 15.0 21.0 3 21.0 29.0 Bin Range Of Forward Voltage Bin Min Max 1 2.70 2.80 2 2.80 2.90 3 2.90 3.00 4 3.00 3.10 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25C 50 25 50 75 Forward Current IF (mA) 100 Ta=25C 40 30 20 10 0 24 0 Relative Luminous Intensity (%) Spectrum Distribution 400 450 500 550 600 Ambient Temperature 1000 100 10 1 -60 -40 -20 0 3.4 3.8 4.2 Forward Current Ta=25C 1000 100 10 1 0 10 20 40 60 80 100 2 10 1 10 Ambient Temperature Ta (C ) Forward Current Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) 3.0 Relative Luminous Intensity vs Relative luminous intensity (%) Relative Luminous Intensity (%) Wavelength (nm) Relative Luminous Intensity vs. 2.6 Forward Voltage( vF)-volts 0 50 10 I F (mA) Ta=25C 20 30 40 40 30 1.0 50 20 0.9 60 0.8 10 70 0.7 0 0 20 40 60 85 100 80 90 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Label explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao 19-213SUBC/S400-A5/S208-2/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 10 Device No. :DSE-000xxxx Prepared date:07-Dec-2009 Prepared by:Xie Haitao