ZMS Series Subminiature Snap-acting Switches (IP65) Features/Benefits * Reliable snap-acting mechanism * Long electrical and mechanical life * Compact size--Ideal when space is limited * Various PCB terminals and actuators * RoHS compatible * IP67 with potted wires only Typical Applications * PCB detection switch * Communication devices * Testing equipment * Security/Alarm systems * Consumer electronics 14 Snap-acting J Specifications Materials CONTACT RATING: 3A@ 125 V AC/ 3A@ 12 V DC, 0.1A @ 12 V DC ELECTRICAL LIFE: 300,000 cycles @ 0.1A 12VDC 100,000 cycles @ 3A 12 VDC 6,000 cycles @ 3A 125 VAC MECHANICAL LIFE: 500,000 cycles INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 500 Vrms. OPERATING TEMPERATURE: see chart below. OPERATING FORCE: 130 grams. CASE: Nylon COVER/ACTUATOR: PBT MOVABLE CONTACTS: Silver* STATIONARY CONTACTS: Silver* TERMINALS: Brass, tin plated. LEVER: Stainless steel * Gold plated terminal available contact Customer Service. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-40 and J-42. For additional options not shown in catalog, consult Customer Service Center. Z M S Series ZMS SP, Mom. Over Travel H High Travel L Low Travel Electrical Rating 00 0.1 A @ 12 V DC 03 3A 125 V AC 3A 12 V DC Operating Force 130 130 grams / 4.59 OPERATING TEMPERATURE -40C to + 120C (without wire) -40C to + 85C (with UL1007 wire) -40C to + 105C (with UL1015 wire) -40C to + 105C (with UL1430 wire) -40C to + 80C (with UL1061 wire) -40C to + 120C (with UL1330 wire) Actuator P00 Pin plunger T10 .25 lever Terminations T11 .28 simulated roller P PC Thru-hole L Left form, PC Thru-hole R Right form, PC Thru-hole S Solder type J Wire leads out bottom * K Wire leads out right side * W Wire leads out left side * Mounting Styles S Std (No support post) L Support post left R Support post right M Mounting hole ** * Standard Wire: 20 AWG UL 1007 Available options - must specify 22AWG UL1430 24AWG UL1061 26AWG UL1330 Circuitry C SPDT W SPST N.C. Y SPST N.O. ** See ZMSM series for data and termination style Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-40 www.ck-components.com ZMS Series Subminiature Snap-acting Switches (IP65) SERIES ZMSH Z M S HIGH OVER TRAVEL Switch option shown: ZMSH00P00SSC 14,7 ( .579 ) PT 12,2 ( .480 ) 1,7 ( .067 ) 8,1 7,5 ( .295 ) ( .319 ) NC NO 0,5 ( .020 ) 2,8 ( .110 ) 4,13 ( .16 ) 14,7 ( .579 ) LOW OVER TRAVEL Switch option shown: ZMSL00P00PSC FP COM 2,5 ( .10 ) 4,13 (.163 ) ZMSL OP o2 ( .079 ) 5,4 ( .213 ) O2 ( .079 ) PT 12,2 ( .480 ) 9,05 OP 7,5 ( .356 ) ( .295 ) NC NO FP COM 0,6 0,1 ( .024 .003 ) J Snap-acting 5,08 ( .200 ) 2,5 ( .098 ) 0,5 0,05 ( .020 .001 ) 2,8 ( .110 ) 5,4 ( .213 ) 5,08 ( .200 ) ELECTRICAL RATING CONTACT MATERIAL OPTION CODE MOVABLE CONTACT STATIONARY CONTACT ELECTRICAL RATING 00 Silver plated Silver plated 0.1 AMP @ 12 V DC 03 Fine Silver Fine silver 3 AMPS @ 125 V AC 3 AMPS @ 12 V DC Model with option "S" (solder type) only. Consult Customer Service center for availability and delivery of nonstandard ratings. OPERATING FORCE OPTION CODE BASIC SWITCH OPERATING FORCE (OZ./GRAMS) 130 4.59 130 Third Angle Projection Dimensions are shown: mm (inch) Specifications and dimensions subject to change J-41 www.ck-components.com ZMS Series Subminiature Snap-acting Switches (IP65) ACTUATOR P00 T10 PIN PLUNGER (IP65) 14,7 ( .579 ) 12,2 ( .480 ) LEVER (IP65) 18,6 ( .7323 ) 14,7 ( .579 ) 12,2 ( .480 ) PT OP T11 .25 LEVER (IP65) 14,7 ( .5787 ) PT PT FP OP OP FP FP 12,2 ( .4803 ) 9,05 ( .3563 ) approved SWITCH CHARACTERISTICS Snap-acting High Overtravel min. (H) .415 .012 (10.55 .3) .012 (0.3) 0.031 (0,8) 0.068 (1,72) 0.152 (3.85) .440 .020 (11.2 .5) 0.020 (0,5) 0.053 (1,35) 0.084 (2,14) 0.186 (4.8) .539 .032 (13.7 .8) 0.030 (0,7) 0.062 (1,65) 0.101 (2,57) Minimum Release Force (grams/oz.) Free Position Max Maximum Pre-travel P00 130 4.59 13 0.45 .472 (12) 0.032 (0,8) T10 195 6.88 55 1.93 .604 (15.35) T11 160 5.64 45 1.58 .726 (18.45) T10 PIN PLUNGER (IP67) 14,7 ( .579 ) OP Blue (NO) Operate Position T11 .25 LEVER (IP67) 14,7 ( .579 ) 12,2 ( .480 ) PT 12,2 ( .480 ) Gray NC Low Overtravel min. (L) Maximum Operate Force (grams/oz.) J P00 Maximum Differential Actuator code .28 LEVER (IP67) 18,6 ( .7323 ) 14,7 ( .5787 ) PT PT FP OP FP 12,2 ( .4803 ) FP OP Black (COM) SWITCH CHARACTERISTICS "J" TERMINATION ONLY Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) Free Position Max Maximum Pre-travel Operate Position Maximum Differential Low Overtravel min. (L) High Overtravel min. (H) P00 130 4.59 13 0.45 .650 (16.50) 0.032 (0,8) .593 .020 (15.05 0.5) .012 (0.3) 0.031 (0.8) 0.068 (1,72) T10 195 6.88 55 1.93 .781 (19.85) 0.152 (3.85) .618 .028 (15.7 .7) 0.020 (0.5) 0.053 (1.35) 0.084 (2,14) T11 160 5.64 45 1.58 .904 (22.95) 0.188 (4.8) .717 .039 (18.2 1.0) 0.030 (0.7) 0.062 (1.65) 0.101 (2,57) Actuator code Dimensions are shown: mm (inch) Specifications and dimensions subject to change J-42 www.ck-components.com ZMS Series Subminiature Snap-acting Switches (IP65) TERMINATIONS P L PC THRU-HOLE LEFT FOOTED, PC THRU-HOLE PC MOUNT (2) 2.5 holes (.098) 9.53 (.375) 5.85 (0.230) 0.23 (.010) 0,6 0,1 ( .024.003) 5,08 ( .200) 5,08 (.200) 5,08 ( .200) 0,50,05 ( .020.001) 2,8 ( .110) 2,5 ( .098) To center 2,05 of terminal (.081 ) 1,35/1,50 (.053) (.059) 2,85 (.1122 ) 5,08 (.200) 5.08 (.200) 0,5 0,6 (.0197 ) (.0236) 2,8 (.1102 ) 5,08 (.2000 ) 5,08 (.2000 ) 10.16 (.400 ) (3) 1.35 to 1.50 holes (.053) to (.059) PC MOUNTING HOLE R RIGHT FOOTED, PC THRU-HOLE 5 (.197) 2,05 (.081) To center of terminal 304,8 (12.00) RIGHT SIDE (IP67) GREY (NC) 12.0 (472) 5.08 (.200) 3.17 (0.125) STRIP ENDS 12 (.472) 304.8 (12.00) 10.16 (.400) (3) 1.35 to 1.50 holes (.053) to (.059) 2,85 (.112 ) K WIRE LEADS BOTTOM (IP67) Black Blue Grey 3.17 (COM) (NO) (NC) (.125) Strip Ends BLUE (NO) BLACK (COM) S W SOLDER TYPE LEFT SIDE (IP67) 304,8 (12.00) Standard Wire: 20 AWG UL 1007 GREY (NC) 3,17 (0.125) STRIP ENDS 1,7 ( .067 ) 4,13 ( .163 ) 2,5 ( .098 ) 4,13 ( .163 ) 0,5 ( .0197 ) 2,8 ( .1102 ) 12 (.472) Available options - must specify 22AWG UL1430 24AWG UL1061 26AWG UL1330 BLUE (NO) BLACK (COM) MOUNTING STYLES S STD (NO SUPPORT POST) L SUPPORT POST LEFT R SUPPORT POST RIGHT 5 ( .197 ) 2X 5 ( .197 ) o2.60 (1,02) 2.60 (.102) CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST, NC (Single Pole, Single Throw, Normally Closed) SPST, NO (Single Pole, Single Throw, Normally Open) Third Angle Projection Dimensions are shown: mm (inch) Specifications and dimensions subject to change J-43 www.ck-components.com J Snap-acting 0,5 (.020) 2,8 (.110 ) 5,4 (.213 ) J PC MOUNT (2) 2.5 holes 9.53 (.098) (.375) 5.85 0.23 (0.230) (.010)