PR1001/L - PR1005/L 1.0A FAST RECOVERY RECTIFIER Features * * * * * * Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 * * * * A C D DO-41 Plastic Mechanical Data * * B A Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number DO-41 Weight: 0.35 grams (approx.) A-405 Weight: 0.2 grams (approx.) A-405 Dim Min Max Min Max A 25.40 3/4 25.40 3/4 B 4.06 5.21 4.10 5.20 C 0.71 0.864 0.53 0.64 D 2.00 2.72 2.00 2.70 All Dimensions in mm "L" Suffix Designates A-405 Package No Suffix Designates DO-41 Package Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 75C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.0A @ TA = 25C @ TA = 100C Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: Symbol PR 1001/L PR 1002/L PR 1003/L PR 1004/L PR 1005/L Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 1.0 A IFSM 30 A VFM 1.2 V IRM 5.0 100 mA trr 150 Cj 15 250 8.0 ns pF RqJA 75 K/W Tj, TSTG -65 to +150 C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5. DS26008 Rev. A-2 1 of 2 www.diodes.com PR1001/L - PR1005/L a Diodes Incorporated IF, INSTANTANEOUS FWD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 10 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 1.0 0.1 Tj = 25C 0.01 25 50 75 100 125 150 175 200 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Tj = 25C f = 1MHz Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC Method) Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE (C) Fig. 1 Forward Derating Curve 20 10 PR1001 - PR1004 10 PR1005 - PR1007 1 0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 1 100 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MW, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50W. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS26008 Rev. A-2 2 of 2 www.diodes.com PR1001/L - PR1005/L