INNOLINE
DC/DC-Converter
with 3 year Warranty
R-6xxx
EN-60950-1 Certified
1-2 AMP
SIP12
Vertical &
Horizontal
●Adjustable Output Voltage
●Non-Isolated
● 1-2AMP Adjustable Positive Step Down
● Integrated Switching Regulator
●Internal Short Circuit Protection
●ON/OFF Control(Ground Off)
●UL94V-0 Package Material
●Wide Input Range
●Efficiency to 96%
●See Innoline Application Notes for
use as an Inverter
Features
Selection Guide
Specifications (refer to the standard application circuit, Ta: 25°C)
Characteristics Conditions Min. Typ. Max.
Input Voltage Range Vout = 1.8V 9V 32V
Vout = 2.5V 9V 32V
Vout = 3.3V 9V 32V
Vout = 5V 9V 32V
Vout = 9V 11V 32V
Vout = 12V 14V 32V
Output Voltage Adjust Range (see table 1) Vout = 1.8V 1.5V 1.8V 3.6V
Vout = 2.5V 1.5V 2.5V 4.5V
Vout = 3.3V 1.8V 3.3V 6V
Vout = 5V 1.8V 5V 9V
Vout = 9V 3.3V 9V 15V
Vout = 12V 3.3V 12V 15V
Continued on next page
Part Input Nominal Vout Output Efficiency (%)
Number Range Output Voltage Adjust Range Current Vin min. Vin max.
SIP12 (V) (V) (V) (A) (%) (%)
R-611.8x 9 – 32 1.8 1.5 – 3.6 1 79 67
R-612.5x 9 – 32 2.5 1.5 – 4.5 1 84 74
R-613.3x 9 – 32 3.3 1.8 – 6 1 88 79
R-615.0x 9 – 32 5 1.8 – 9 1 92 84
R-619.0x 11 – 32 9 3.3 – 15 1 96 90
R-6112x 14 – 32 12 3.3 – 15 1 97 92
R-621.8x 9 – 32 1.8 1.5 – 3.6 2 76 68
R-622.5x 9 – 32 2.5 1.5 – 4.5 2 81 74
R-623.3x 9 – 32 3.3 1.8 – 6 2 86 80
R-625.0x 9 – 32 5 1.8 – 9 2 90 85
R-629.0x 11 – 32 9 3.3 – 15 2 95 91
R-6212x 14 – 32 12 3.3 – 15 2 96 93
Note: Vin -Vout ≥1.5V if adjust function is used!
Suffix x: (see mechanical drawing for details)
x = P pins vertical through hole
x = D pins bent for horizontal through hole mounting
The R-6XXX series is a high performance 1.5V to 15V (18V), 1.1Amp to 2.0Amp,12-Pin SIP (single in-line
package) switching regulator. Synchronous rectification yields excellent efficiencies of up to 97%.
Short circuit protection reduces the short circuit input current to under 50mA.
Description
RoHS
2011/65/EU
6/6
Refer to Application Notes
www.recom-power.com I-51REV: 1/2016
R-6xxx
Characteristics Conditions Min. Typ. Max.
Output Current R-61xxP/D 0.1A 1.1A
R-62xxP/D 0.2A 2.0A
Output Current Limit 4A 4.5A 5A
Short Circuit Input Current Vin > 12V 20mA 100mA
Short Circuit Protection Continuous, automatic recovery
Output Voltage Accuracy At 100% Load ±1% ±2%
Line Voltage Regulation (Vin = min. to max. at full load) 0.5%
Load Regulation (10 to 100% full load) R-61xxP/D 0.5%
R-62xxP/D 1.0%
Vo Ripple & Noise R-61xxP/D 40mVpp 100mVpp
R-62xxP/D 40mVpp 120mVpp
Transient Response (see note 1) 50% Load Change 100us 200us
Vout Over / Undershoot 5%
Remote ON / OFF (see note 2) Open or high (Power ON) 2.0V 10V
(positive logic) Low (Power OFF) 0.8V
Remote Off Input Current Remote ON/OFF low level 100µA
Max capacitance Load with normal start-up time, no external diodes 200µF
with <1 second start up time + diode protection circuit 6800µF
Switching Frequency 200kHz 250kHz 300kHz
Quiescent Current Vin = min. to max. at 0% load 6mA 10mA
Operating Temperature Range -40°C +85°C
Storage Temperature Range -40°C +125°C
Case Material Non-Conductive Black Plastic
Potting Material Epoxy (UL94V-0)
internal Power Dissipation Io x Vo x (1-Efficiency) 1.0W
Package Weight 9g
Packing Quantity 15 pcs per Tube
MTBF (Nominal Vout, 100% load) Tamb. = +25°C 563 x 10³ hours
Tamb. = +71°C 117 x 10³ hours
EN General Safety Report: SPCLVD 1301028-1 EN60950-1:2006 + A12:2011
R-6xxxP_D
Series
Specifications (refer to the standard application circuit, Ta: 25°C)
Output Current vs Input Voltage
Notes:
INNOLINE
DC/DC-Converter
Output Current (A)
2
1
14
9.0 28
Input Voltage (V)
0
1.2A
R-62XX
R-61XX
24 32
Ambient Temperature (°C)
90
60
20
40
1.510.5
Internal Power Dissipation (W)
0
80
85
0.7
1. Requires a 100µF electrolytic or tantalum output capacitor for proper operation in all applications (the capacitor to be placed as close as possible to the output pins).
2. ON / OFF pin can be driven by TTL (logic gate), open-collector bipolar transistor or open-drain MOSFET.
3. Output Current vs. Input Voltage (see graph below).
}
Detailed Information see
Application Notes chapter "MTBF"
at Vin = 32VDC
Efficiency = 93% (see ”Selection Guide” table)
Vo = 12VDC
Io = 1W / 12V x (1-0.93) = 1.19A
Max output current calculation:
Internal power dissipation
(1W) = Io x Vo x (1-Efficiency)
Io = 1(W) / Vo x (1-Efficiency)
at Vin = 14VDC
Efficiency = 96% (see ”Selection Guide” table)
Vo = 12Vdc
Io = 1W / 12V x (1-0.96) = 2.08A
Example : R-6212P
I-52 www.recom-power.comREV: 1/2016
R-6xxx
R-6xxxP_D
Series
Characteristics
INNOLINE
DC/DC-Converter
Efficiency (%)
Iout (A)
2.01.51.00.1 0.5
Vin = 9V
Vin = 12V
Vin = 26V
80
60
70
50
82.5
85.0
87.5
90.0
92.5
100.0
Ripple (mV)
100
60
20
40
Iout (A)
0
2.01.51.00.1 0.5
80
Vin = 26V
Vin = 12V
Vin = 9V
Iout (A)
2.01.51.00.1 0.5
Vin = 12V
Vin = 24V
Vin = 38V
Vin = 9V
80
60
70
50
82.5
85.0
87.5
90.0
92.5
100
Efficiency (%)
R-623.3 / R-613.3
Efficiency vs Output Current
R-625.0 / R-615.0
Efficiency vs Output Current
Ripple (mV)
100
60
20
40
Iout (A)
0
2.01.51.00.1 0.5
80
Vin = 24V
Vin = 12V
Vin = 9V
Vin = 38V
R-623.3 / R-613.3
Ripple vs Output Current
R-625.0 / R-615.0
Ripple vs Output Current
Package Style and Pinning (mm)
Bottom
View
1 2 3 4 5 6 7 8 9
2.54
0.7
4.0
15.00
32.20
10 11 12
9.1
0.2
Bottom
View
4.0
0.7
0.7
1 2 3 4 5 6 7 8 9
2.54
0.7
15.00
32.20
10 11 12
9.1
0.2
RECOM
R-615.0P
RECOM
R-615.0D
2.13
2.13
SIP12 PIN Package
Pin Connections
Pin # Name Description
1 ON / OFF Input pin : Active low (less than 0.8V) to disable the device
2, 3, 4 Vin Power input
5, 6, 7, 8 GND Input and output ground (common)
9 , 10, 11 Vout Power output
12 Vout-Adj With external resistors R1,R2 to selected output voltage
Tolerance: xx.x ±0.5mm
xx.xx ±0.25mm
www.recom-power.com I-53REV: 1/2016
R-6xxxP_D
Series
Table 1: Adjustment Resistor Values
INNOLINE
DC/DC-Converter
Standard Application Circuit
Add a blocking diode to Vout if
current can flow backwards
into the output, as this can
damage the converter.
Protection diodes are
required for high capacitive
loads.
Refer to R-5xxxA Datasheet
(see Optional Diode Protection
Circuit) for circuit suggestions.
R-6xxx
1.1Adc R-611.8P/D R-621.5P/D R-613.3P/D R-615.0P/D R-619.0P/D R-6112P/D
2.0Adc R-621.8P/D R-622.5P/D R-623.3P/D R-625.0P/D R-629.0P/D R-6212P/D
Vout (nominal) 1.8Vdc 2.5Vdc 3.3Vdc 5Vdc 9Vdc 12Vdc
Vout (adj) R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2
1.5 13.6KΩ3.3KΩ
1.8 8.2KΩ3.1KΩ820Ω
2.0 10KΩ15KΩ5.1KΩ1.5KΩ
2.5 5.1KΩ13KΩ3.6KΩ
3.0 2.5KΩ10KΩ51KΩ7.0KΩ
3.3 1.7KΩ5.9KΩ9.7KΩ0Ω0Ω
3.6 1.2KΩ3.9KΩ18KΩ14KΩ1.5KΩ560Ω
3.9 2.8KΩ9.1KΩ20KΩ3.3KΩ1.2KΩ
4.5 1.6KΩ3.9KΩ60KΩ7.5KΩ2.1KΩ
5.0 2.4KΩ11KΩ4.0KΩ
5.1 2.2KΩ60KΩ12KΩ4.3KΩ
5.5 1.6KΩ15KΩ17KΩ5.6KΩ
6.0 1.1KΩ7.2KΩ24KΩ7.5KΩ
7.0 2.8KΩ51KΩ12KΩ
8.0 1.5KΩ130KΩ19KΩ
9.0 880Ω31KΩ
10 450Ω36KΩ55KΩ
11 180Ω15KΩ125KΩ
12 8.2KΩ
13 4.7KΩ11KΩ
14 2.7KΩ4.0KΩ
15 1.3KΩ1.6KΩ
I-54 www.recom-power.comREV: 1/2016
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
RECOM:
R-611.8D R-611.8P R-6112D R-6112P R-612.5D R-612.5P R-613.3D R-613.3P R-615.0D R-615.0P R-619.0D
R-619.0P R-621.8D R-621.8P R-6212D R-6212P R-622.5D R-622.5P R-623.3D R-623.3P R-625.0D R-625.0P
R-629.0D R-629.0P