ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 1
H-43
www.ittcannon.com
ARINC 404
DPX
H
Rack and Panel
DPXA - Single Shell DPX
DPXA connectors are one-piece shell miniature
rack/panel connectors. The construction offers
high strength and maximum utilization of insert area
for contact arrangements accommodating up to 106
contacts. Shells are keystone-shaped for polar-
ization. Operating temperature for the DPXA is
-54.2˚C to +125˚C (-67˚F to +257˚F).
DPXB - Polarized ARINC Shell
DPXB connectors are DPXA connectors with an
ARINC B shelf. Additional polarization is provided
by three hexagonal polarizing posts.
DPX2 - Two Gang DPX Series
DPX2 connectors are the original two-gang versions
of the DPX, and are made of the same materials and
accommodate the same contact arrangements.
Keystone shaped shells accommodate two DPX
inserts with up to 212 contacts. The DPX2 has
three polarizing posts with 99 polarizing positions.
DPX2 - A - ARINC A Shell
DPX2-A connectors are DPX2 connectors with an
ARINC A shell. This shell type has the receptacle
flange placed .344 (8.74) from the front of the
engaging portion of the shell, and short aluminum
alloy polarizing posts permit polarization before
contacts engage.
DPX3 - Three Gang DPX Series
DPX3 connectors are three-gang versions of the
DPX, made of the same materials, and accommo-
date the same contact arrangements. The three-
gang version can therefore accommodate up to a
total of 318 in the keystone shaped shells, with
three polarizing posts that are capable of providing
up to 99 polarizing positions.
DPX4 - Four Gang DPX Series
DPX4 connectors are four gang versions of the DPX,
made of the same materials, and can accommodate
four separate arrangements that can total up to
424 contacts. The DPX4 has three polarizing posts
with 99 polarizing positions.
DPX*MA - LITTLE CAESAR' Contact Assembly
DPX*MA connectors are DPX connectors with the
LITTLE CAESAR contact assembly for rear in-
sertion, release, and extraction of crimp type con-
tacts. Insertion requires no tool; extraction requires
an expendable plastic tool. A hard dielectric,
closed-entry socket insert has lead-in chamfers for
positive mating of contacts. Contacts are crimpable
with the M22501 tool.
DPX*ME - Environmental with LITTLE CAESAR
Contact Assembly
DPX*ME connectors are DPXMA connectors with
environmental interfacial and grommet seals, and
olive drab shell finish.
receptacle flange placed .060 (1.52) from the front
of the engaging portion of the shell, and polarizing
posts permit polarization before the shells engage.
DPX2-B - ARINC B Shell
DPX2-B connectors supersede the DPX2-A and
have an ARINC B Shell. This Shell type has the
DPXA-34
DPX2-34B
DPX3-34
DPXB-33
DPX2-33B
DPX4-33
DPXA/DPXB/DPX2
Aluminum alloy
Cadmium plate with yellow chromate
Melamine or Phenolic
Copper alloy
Gold
Solder Pot
Die Cast
Cadmium
Steel
Cadmium Plate
N/A
Material
Finish
Material
Material
Finish
Termination
Material
Finish
Material
Finish
Material
Shell
Insulator
Contacts
Polarizing Posts
Screws & Lockwashers
Seals
DPX*MA/DPX2*MA/ME
Aluminum alloy
Cadmium plate with yellow chromate for MA: olive drab for ME
Diallyl phthalate or epoxy
Copper alloy
Gold
Crimp
Die cast
Cadmium
Steel
Cadmium plate
Silicone
Specifications
QQ- A-591/A380
QQ-P-416
MIL-M-14
QQ-C-533
MIL-G-45204
N/A
QQ-P-416
QQS-630-637
QQ-P-416
N/A
Performance and Material Specifications (DPXA/DPXB/DPX*MA/DPX*ME)
ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 43
H-44 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
How to Order
H
Rack and Panel
DPXA/DPXB
DPX2
SERIES PREFIX
SHELL STYLE
CLASS
CONT ACT ARRANGEMENT
SHELL TYPE
CONTACT TYPE
MODIFICATION
POLARIZING POSITION
LESS CONTACTS*
SERIES PREFIX
TWO GANG SHELL
CLASS
CONT ACT ARRANGEMENT
(Side A)
CONTACT TYPE
CONT ACT ARRANGEMENT
(Side B)
CONTACT TYPE
SHELL TYPE
SHELL STYLE
MODIFICATION NUMBER
POLARZING POSITION
LESS CONTACTS*
DPX
DPX
DPX
DPX
DPX
- 34
- 33
P
S
- 1
- 00 01 - F0
32C2
67
A
B MA -
- 00 01
- 03 01
- 02 01
2
2
2
P
P
P
B
A
B
P
P
P
MA
MA - F0
57
57
57
- 33
- 33
- 34
- 57
- 57
- 57
SERIES PREFIX
DPX - ITT designation
CONT ACT ARRANGEMENT SHELL STYLE
MODIFICATION
POLARIZING POSITION
CONTACT TYPE
SHELL TYPE
2 thru 106 (see pages H-50 to H-54 No designator - original two-gang DPX
A - ARINC A shell
B - ARINC B shell
See pages H-66 to H-69.
See pages H-70
SERIES PREFIX
SHELL
CLASS
DPX - ITT Cannon designation
2 - Two gang
No designator - Solder type
MA - Crimp type with LITTLE CAESAR contact
assembly
ME - Environmental crimp type
P for pin; S for socket
33 for plug; 34 for receptacle
2 thru 106 (see pages H-50 to H-54)
33 for plug; 34 for receptacle
P for pin: S for socket
DPXA - See page H-66 to H-69
DPXB - See pages H-66 to H-69.
For DPXB shell style only
A - Single shell
B - Polarized ARINC shell
No designator - Solder type
MA - Crimp type with LITTLE CAESAR contact
assembly
ME - Environmental crimp type
MB - Wire seperator
MK - Mounting springs
SHELL STYLE
CLASS
CONT ACT ARRANGEMENT
SHELL TYPE
CONTACT TYPE
MODIFICATION
POLARIZING POSTION
RoHS
R
R - RoHS compatible
RoHS version
RoHS
R
RoHS
R - RoHS compatible
ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 44
DPX3/DPX4
DPXMA/ME DPXMA/DPXME - 0PX - 3 Shell Layouts
DPXMA/DPXME - 0PX - 4 Shell Layouts
SERIES PREFIX
SHELL
CLASS
CONT ACT ARRANGEMENT
(Side A)
CONTACT TYPE
CONT ACT ARRANGEMENT
(Side B)
CONTACT TYPE
CONT ACT ARRANGEMENT
(Side C)
CONTACT TYPE
CONT ACT ARRANGEMENT
(Side 0)
CONTACT TYPE
SHELL TYPE
MODIFICATION NUMBER
POLARIZING POSITION
**CONTACT TYPE
P for pin; S for socket. Designation follows each
arrangement as ordered for 3 or 4 gang versions.
SHELL TYPE
33 for plug; 34 for receptacle
MODIFICATION See pages H-66 to H-69.
POLARIZING POSITION See pages H-70
Layout
*E24
*F122
G122
*E142
*A166
171
201
*C205
B240
C240
*D244
A279
A318
*Applicable to "ME" only. Consult factory for similar layouts application to "MA."
NOTE: For pictorial views of above layouts see pages 52-56.
W8
AW8
A,B,C
A,B
B
C
MA:
ME:
32W4
A32W4
C
C
C
Insert - Used in shell position as noted
67
67
A,B
A,B
A,B,C
A
A,C
A,B
C
A106
A106
C
B
B
C
A,B
A,B
A,B,C
57
57
A,C
A,B,C
Layout
145
*B148
B150
*181
*B189
*A198
268
*E287
*220
*A233
279
*F287
*E326
A346
B346
385
A424
W8
AW8
C,D
A,B
B
C,D
D
B
B
B
MA:
ME:
32W4
A32W4
C,D
A
26
26
A,B,C
B
Insert - Used in shell position as noted
67
67
D
C,D
A
B
A,B
A,B,C,D
B
B,C,D
A
A
C,D
A,B
A
A106
A106
A
C
A
A,C
C,D
C,D
C,D
A,C,D
A,B
C,D
B,C,D
A,B,C,D
None
None
D
A
B
57
57
A,C
A,B,C
DPX 3 ME - 57 P - 57 P - 57 P - 34 - 00 01
DPX 4 ME - 57 P - 57 P - 57 P - 57 P - 34 - 00 01
SERIES PREFIX
DPX - ITT designation
SHELL
3 - Three gang 4 - Four gang
CLASS
MA - Crimp type contacts in LITTLE CAESAR
contact assembly
ME - Environment- resistant, crimp type contacts
*CONT ACT ARRANGEMENT
See pages H-50 to H-54 for applicable arrangements.
Please specify each arrangement number as in-
dicated in ordering nomenclature for 3 or 4 gang if
not listed below.
ROHS Finish Zinc Plate per ASTM-B-633 with Trivalent Chromate Coating
H-45
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
How to Order
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 45
H-46 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Single Gang
DPXA-33
DPXA-34
DPXA-33 ARINC Shell
DPXA-34 ARINC Shell
1.614 +_.006
(41.00 +_ 0.15)
.750 +_.005
(19.05 +_ 0.13) .995 +_.005
(25.27 +_ 0.13)
1.060
(26.92)
All tolerances +_ .015(0.38) unless otherwise noted.
.125 (3.18)
.750 (19.05)
1.157 (29.39)
.782 (19.86)
.125 (3.18)
.344 (8.74)
MAX.GROMMET
EXTENSION
MAX.GROMMET
EXTENSION
1.061
(26.95)
1.405
(35.69)
.060
(1.52) .125
(3.18)
.954
(24.23)
.766
(19.46)
.125 (3.18)
1.541 (39.14) MAX.
2.320 (58.93) MAX. WITH COAX
NOTE: DPXME AND
DPXNE GROMMETS ARE
APPLICABLE TO ALL
SHELL SIZES
1.634 (41.50) MAX.
2.413 (61.29) MAX. WITH COAX
NOTE - ARINC requires that DPXB shells are mounted with the
polarizing posts at the top. See pages 71-72
2.062 +_.005
(52.38 +_ 0.13)
1.750 +_.016
(44.45 +_ 0.41)
2.062 +_.005
(52.38 +_ 0.13)
.720 +_.005
(18.29 +_ 0.13)
1.720 +_.005
(43.69 +_ 0.13)
.718 +_.005
(18.24 +_ 0.13)
1.750 +_.005 TYP.
(44.45 +_ 0.13)
.720 +_.005
(18.29 +_ 0.13)
1.720 +_.005
(43.69 +_ 0.13)
.718 +_.005
(18.24 +_ 0.13)
2.000 (50.80)
2.047
(52.00)
2.000 (50.80)
TWO HOLES
.120 (3.05) DIA. FOR
MTG. REF. ONLY
POLARIZING POST
1.437 (36.50)
REF.
.750 +_.005
(19.05 +
_ 0.13)
1.125 +_.015
(28.58 +_ 0.38)
.125 R.TYP
(3.18)
.125 R.TYP
(3.18)
MTG.DATUM
MTG.DATUM
2.012
(51.11)
.120 (3.05) DIA.
4 MTG. HOLES
3 POLARIZING
KEYS
TWO HOLES .120 (3.05)
DIA. FOR MTG.
REF. ONLY
.187 R.TYP
(4.75)
2.312
(58.73)
1.125
(28.58)
2.312 (58.73)
.120 (3.05)DIA.
4MTG. HOLES
.120 (3.05)DIA.
4MTG. HOLES
.120 (3.05) & C' SUNK
82 X.230 (5.84) DIA.
4 HOLES
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 46
H-47
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
DPX2-33 Shell
2.062 +_ .005
(52.38 +_ 0.13)
2.062 +_ .005
(52.38 +_ 0.13)
1.750 +_ .010
(44.45 +_ 0.41)
2.438 +_ .010
(61.92 +_ 0.25)
2.438 +_ .010
(61.93 +_ 0.25)
1.437 +_ .005
(36.50 +_ 0.13)
1.750 +_ .016
(44.45 +_ 0.41)
FLOATING EYLETS
.116 (2.95) I.D.
FOR #4-40 SCREWS
SHOWN FOR REF. 1.437 +_ .005
(36.50 +_ 0.13)
2.783 +_ .005
(70.69 +_ 0.13) .988 +_ .005
(25.10 +_ 0.13)
.954 +_ .005
(24.23 +_ 0.13)
2.468 +_ .010
(62.69 +_ 0.25)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
1.125
(28.58)
.125 (3.18)
1.015
(25.78)
.344 (8.74)
.766 (19.46) .125 (3.18)
JUNCTION
SHELL TABS
SHOWN FOR
REF
2.783 +_ .005
(70.69 +_ 0.13)
3.110
(78.99)
3.109
(78.97)
AB
TOP
BA
TOP
BA
POT BA
POT
6 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
.718 +_ .005
(18.26 +_ 0.13)
.720 +_ .005
(18.20 +_ 0.13)
TYP.
.720 +_ .005 TYP.
(18.20 +_ 0.13)
.188 (4.78) R. TYP.
.188 (4.78) R. TYP.
2.000
(50.80)
2.000 (50.80)
3 POLARIZING
POSTS
3 POLARIZING
POSTS
.988 +_ .005
(25.09 +_ 0.13)
2.814 +_ .010
(71.48 +_ 0.41)
3.063
(77.80)
.188 (4.78) R. TYP.
.063 (1.60)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
.125 (3.18)
.766
(19.46)
.125 (3.18)
.063 (1.60)
1.016
(25.81)
.344 (8.74)
JUNCTION
SHELL TABS
SHOWN FOR
REF.
1.125
(28.58)
All tolerance are +_ .015 (0.38) unless otherwise noted.
3.063
(77.80)
.188 (4.78) R. TYP.
.750 +_ .005 TYP.
(19.05 +_ 0.13)
.750 +_ .005 TYP.
(19.05 +_ 0.13)
8 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
8 HOLES .120 (3.05) DIA.
FOR #4-40 SCREWS
MTG. DATUM
MTG. DATUM
MTG. DATUM
MTG. DATUM
TWO
POLARIZING
POSTS
CENTER
POLARIZING
POST
TWO
POLARIZING
POSTS
CENTER
POLARIZING
POST
2.312(58.73)
2.312(58.72)
.375 TYP.
(9.52)
.375 +_ .005 TYP.
(9.52 +_ 0.13)
DPX2-34 Shell
DPX2-33A ARINC A Shell
DPX2-34A ARINC A Shell
Two Gang
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 47
H-48 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
DPX2-33B
DPX2-33F (Female)
DPX2-34F (Female)
DPX2-34M (Male)
DPX2-33M (Male)
DPX2-34B
.988 +_.004
(25.10 +_ 0.10) 2.783 +_.005
(70.69 +_ 0.13)
2.468 +_.015
(62.69 +_ 0.38)
.718 +_.005
(18.24 +_ 0.13)
.720 +_.005
(18.29 +_ 0.13)
1.750 +_.015
(44.45 +_ 0.38)
3 POLARIZING
KEYS
.188 (4.78) R. TYP. .060 (1.52)
.125 (3.18)
1.061
(26.95)
All tolerances are +_ .015(0.38) unless other wise noted.
1.437 (32.50)
REF 2.000 (50.80)
4 MTG. HOLES
.120 (3.05) DIA. FOR
#4-40 SCREWS
.766
(19.46) .125 (3.18)
MTG DATUM
.954
(24.23)
.3.075
(78.10)
2 HOLES .120 (3.05)
DIA. FOR MTG.
REF.ONLY
2.783 +_.005
(70.69 +_ 0.13)
.718 +_.005
(18.24 +_ 0.13)
.988 +_.005
(25.09 +_ 0.13)
.375 +_.005
(9.52 +_ 0.13)
2.676 +_.016
(67.97 +_ 0.41)
2.062 +_.006
(52.38 +_ 0.15)
2.438 +_.006
(61.92 +_ 0.15)
1.612 +_.005
(40.94 +_ 0.13)
.750 +_.005
(19.05 +_ 0.13)
TYP.
2.814 +_.016
(71.48 +_ 0.41)
2.062 +_.006
(52.38 +_ 0.15)
1.750 +_.016
(44.45 +_ 0.41)
2.438 +_.010
(61.92 +_ 0.25)
.750 +_.005
(19.05 +_ 0.13)
TYP.
2.062 +_.006
(52.38 +_ 0.15)
1.612 +_.005
(40.84 +_ 0.13)
2.438 +_.010
(61.92 +_ 0.25)
BPOTA
AB POT B
AB
TOP TOP
A
B
POTA
BAPOT
.750 +_.005
(19.05 +_ 0.13)
TYP.
.375 +_.005
(9.52 +_ 0.13)
2.676 +_.016
(67.97 +_ 0.41)
2.438 +_.005
(61.92 +_ 0.13)
2.062 +_.006
(52.38 +_ 0.15)
1.750 +_.016
(44.45 +_ 0.14)
.188(4.78) R. TYP.
3.725
(94.62)
MAX.
2.032
(51.61)
Not availble on DPX2-34B Shells
8 HOLES .120(3.05)DIA
FOR #4-40 SCREWS
2.312 (58.72)
COUPLING
NUT
.750 +_.005
(19.05 +_ 0.13)
TYP.
375 +_.005
(9.52 +_ 0.13)
2.814 +_.016
(71.48 +_ 0.41)
.344 (8.74)
1.016 (25.81)
.063
(1.60)
.125
(3.18)
1.125
(28.58)
TWO
POLARIZING
POSTS
.766 (19.46)
.063
(1.60)
3.063
(77.80)
.125(3.18)
.988
(25.09)
1.88(4.78) R. TYP.
2.256
(57.30)
MAX.
.312
(7.92)
HEX.
DPX2-34M with extended hex,
knob type -0501; example, DPX2-34M-0501
DPX2-34M with wing handle type
-0901; example, DPX2-34M-0901
8 HOLES .120 (3.05) DIA
FOR #4-40 SCREWS
STANDARD SUPPLIED WITH HEX. SLOTTED KNOB
COUPLING
SCREW
TWO
POLARIZING
POSTS
3.063 (77.80)
2.312 (58.72)
COUPLING
SCREW
TWO
POLARIZING
POSTS
3.063
(77.80)
2.312(58.72)
.375 +_.005
(9.52 +_ 0.13)
8 HOLES .120 (3.05) DIA
FOR #4.40 SCREWS
.188 (4.78) R. TYP
.344 (8.74)
3.063(77.80)
COUPLING
NUT
TWO
POLARIZING
POSTS
8 HOLES .120(3.05)DIA
FOR #4-40 SCREWS
.188 (4.78) R. TYP
SEE DPX2-33M
FOR DETAILS
.063
(1.60)
1.016 (25.81)
.125 (3.18)
1.125
(28.58)
.063
(1.60)
.766 (19.46)
2.312 (58.72)
.125 (3.18)
.720 +_.005
(18.29 +_ 0.13)
1.437 (36.50)
REF
3.110
(78.99)
2.000
(50.80)
.188 (4.78)R. TYP.
3 POLARIZING
POSTS
2 HOLES .120(3.05)DIA.
FOR MTG.REF.ONLY
MTG.DATUM
.120 (3.05)DIA. & C' SUNK
82 X .230 (5.84) DIA. 4 HOLES
SHOWN FOR REF.
+ +
Two Gang - ARINC B Shell
H
Rack and Panel
Two Gang - Screw Coupling
Engaging Devices
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 48
H-49
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX3/DPX4
DPX3-33 DPX3-34
DPX4-34DPX4-33
All tolerances are +_ .015(0.38) unless other wise noted.
1.612
(40.94)
2.000
(50.80)
4.354
(110.59)
4.026
(102.26)
.988
(25.10
.766 (19.46)
.125 (3.18)
MTG. DATUM
1.750
(44.45)
2.000
(50.80)
.718
(18.24)
.282
(7.16) 1.437
(36.50)
6 MTG HOLES
.120 (3.05) DIA.
4.026
(102.26)
4.318
(109.68)
.060 (1.52)
1.061
(26.95)
3.711
(94.26)
.125 (3.18)
1.061
(26.95)
.060(1.52)
2.468
(62.69)
2.783
(70.69)
.125 (3.18)
.282 (7.16)
3.860 (98.04)
3.610 (91.69)
.930
(23.62)
1.648
(41.86)
MTG.DATUM
10 MTG HOLES
.120 (3.05) DIA.
3.075
(78.10)
.125 (3.18)
.766 (19.46)
2.783
(70.69)
.988
(25.10)
.180 R. TYP.
(4.57)
.282 (7.16)
.930
(23.62)
1.648
(41.88)
MTG. DATUM
3.110
(78.99)
1.612
(40.94)
3.860
(98.04)
MTG. DATUM
.718
(18.24)
.282 (7.16) 1.437
(36.50)
.180 R. TYP.
(4.57)
Two Gang - ARINC B Shell
Four Gang
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 49
H-50 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
C2
C7
8*
10C3*
B16C3*
17
23
25C3*
C2
Contact
Arr.
No. of
Contacts
& Wire size
Test
Voltage
AC (RMS)
C7
8
10C3
B16C3
17
23
25C3
NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data
PIN
Contact
Type
Code
R
AB
Consult Factory
K
A
B
Same as Socket
(Use C7)
C
AA
Z
1-8
L
l
L
J
M
A
M
B
M
C
M
K
M
Z
M
AA
L
L
L
K
L
C
L
A
L
B
L
Z
L
AA
SOCKET
Contact
Type
Code
R
Consult Factory
AC
F
G
Same as Pin
Same as Pin
K
Same as Pin
Same as Pin
Same as Pin
1-8
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Contact
Numbers
1-2
1-2
1-7
1-7
1-7
1-7
1-7
1-7
8
1-4, 8-10
5,6,7
1-4, 8-10
5,6,7
4-16
1-3
4-16
1-3
4-16
1-3
4-16
1-3
4-16
1-3
4-16
1-3
1-17
1-23
4-25
1-3
4-25
1-3
4-25
1-3
4-25
1-3
4-25
1-3
4-25
1-3
No. of
Contacts
2
2
4
3
7
0
Contact
Numbers
1-2
1-2
1,2,4,5
3,6,7
1-7
22
2
1
L
F
G
4-25
1,3
2
22 (#20).
3 coax
23 #20
17 #20
13 #16
3 coax
7 #20
3 coax
8 #12
7 coax
2 coax
(RG-9/U)
1000 (1-7)V
1000 (1,2)V
matched
impedance
2000V
1500
(4-16)V
1000
(1-3)V
1500
(1-4,
8-10)V
2000V
1500
(4-25)V.
1000
(1-3)V
2000
(15-23).
1500
(1-14)V.
No. of
Contacts
2
2
7
7
7
7
7
7
N
7
3
7
3
13
3
13
3
13
3
13
3
13
3
13
3
17
23
22
3
22
3
22
3
22
3
22
3
22
3
Contacts
Arr. No.
C2
C2C
C2M
C7
C7A
C7B
C7B
C7M
C7X
C7AA
8
10C3
A10C3
B16C3
C16C3
G16C3
J16C3
ZE16C3
ZF16C3
17
23
25C3
F25C3
G25C3
J25C3
Q25C3
R25C3
Contact Arrangement Variations Solder Type (Captive Contacts)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 50
26*
30C4
32
32C2*
40*
40C1*
45*
57*
67*
26
Contact
Arr. Contact
Arr. No. Contact
Numbers Contact
Numbers
No. of
Contacts
PIN SOCKET
No. of
Contacts
No. of
Contacts
& Wire Size
Test
Voltage
AC (RMS)
Contact
Type
Code
Contact
Type
Code
Same as Pin1-26
1,6 14-26
2-5, 7-13
27-30
1,6 14-26
2-5, 7-13
27-30
1,6 14-26
2-5, 7-13
27-30
1,3,4,7-32
2,5,6
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
L
F
L
F
1-39
A1
1-30
A1, A2
1-30
A1, A2
1-30
A1, A2
1-30
A1, A2
1-30
A1, A2
1-30
A1, A2
1-30
A1, A2
1-40
1-39
A1
1-39
A1
1-39
A1
1-39
A1
1-39
A1
1-39
A1
1-45
1-57
1-2,6-65
3-5
L
M
L
L
L
A
L
AA
L
Z
L
C
L
K
L
B
L
L
AA
L
Z
L
B
L
A
L
K
L
M
L
M
A
L
M
AA
L
M
Z
M26
15
11
4
15
11
4
15
11
4
29
3
30
2
30
2
30
2
30
2
30
2
30
2
40
39
1
39
1
39
1
39
1
39
1
39
1
4545
L40C1
K40C1
J40C1
F40C1
A40C1
40C1
40
N32C2
M32C2
D32C2
C32C2
A32C2
32C2
32
C30C4
B30C4
A30C4
261500V26 #16
15 #20.
11 #16,
4 coax
123456
78910111213
141516171819
20212223242526
1
12 3456
789101112131415
1617181920212223
242526272829303132
A2 A1
123456
789101112
13141516
17181920
21222324
252627282930
123456
7891011121314
151617181920212223
2425262728293031
32
A1
1234567
8
8
8
8
9
9
9
9
10
10
11
11
12
12
13
13
14
14
15
15
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
16
16
17
17
1819
1819
20
20
21
21
22
22
23
23
24
24
25
25
2021
22
23
24
25
26
26
27
27
28
28
26
2728
2021
22
23
24
25
26
2728
29
29
30
30
31
31
32
32
33
33
34
34
35
35
29
29
30
31
3233
34
35
36
36
37
37
3839
38
36
37
38
30
31
3233
34
3536
37
38
39404142434445
39404142
39404142
434445
4647
434445
4647
48495051525354555657
48495051525354
55565758596061626364656667
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
3334353637383940
2345
6
78910111213
14151617181920212223242526
27282930
3 #16
29 #20
30 #20
2 coax
40 #20
39 #20
1 coax
45 #20
57 #20
64 #20
3 #16
1500 (2-5
& 7-13)V
1000 (1,6
& 14-26)V
2000
(1-6)
1500
(7-32)V
1500
(1-30)V
1000
(A1, A2)V
1500V
1500
(1-39)V
1000
(A1)V
1500V
1500V
1000V
57
64
3
67
57
L
C
30
2
39
1
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
Same as Pin
30C4
32
32C2
40
40C1
45
57
67
NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data
H-51
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Contact Arrangement Variations Solder Type (Captive Contacts)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 51
H-52 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA/ME
8
D8
W8**
10
A10
10W3**
B16W3**
25W3
26
8
D8
W8**
(For MA)
AW8
(For ME)
10
A10
10W3**
SOCKET
ONLY
B16W3
25W3
26
Contact
Arr. No. of Contacts
& Wire Size Test Voltage
AC (RMS) Contact
Arr. No. No. of
Contacts Contact
Numbers
Contact Size or
Code Letter
8 #12
1234
5678
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
1
1
2
2
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
9
9
10
10
10
10
10
10
11
11
11
12
12
12
13
13
13
14
14
14
15
15
15
16
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
2526
7
7
8
8
8
D8
W8
C8A
C8B
C8C
C8E
C8G
C8H
10
A10
10W3
A10C3
B10C3
B16W3
25W3
25A3
25B3
25D3
26 26
8
8
2
8
8
2
7
3
7
3
7
3
13
3
22
3
22
3
22
3
22
3
4
12
16
12
coax
G
F
H
R
S
AB
B
20
16
4
20 H.D.
coax
20 H.D.
AC
20 H.D.
AC
16
coax
20
coax
20
C
20
D
20
B
16
1-8
1-4
5-8
1-8
1,2
3-10
1-3, 5,
6, 8-10
4, 7
1-4, 8-10
5-7
4-16
1-3
4-25
1-3
1-26
1000V (1-8)V
1500V
1500V
1500
(1-4, 8-10)V
1500 (4-16)
1000 (1-3)V
socket side only
(Not avaiable
in ME series)
1500 (4-25)V,
1000 (1-3)V
(Not available
in ME series)
1500V
4 #16, 4 #12
8 coax
2 #8, 8 #20
8 #16, 2 #4
7 #20, H.D.,
3 coax
13 #16, 3 coax
22 (#20) 3 coax
26 #16
**Crimp rear release coaxial contacts.
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 52
H-53
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA/ME
32W2
32W2**
(For MA)
A32W2
(For ME)
32W4**
(For MA)
A32W4
(For ME)
36W7**
40
40W1**
(For MA)
A40W1
(For ME)
45
32W4
36W7
40
40W1
45
Contact
Arr. No. of Contacts
& Wire Size Test Voltage
AC (RMS) Contact
Arr. No. No. of
Contacts Contact
Numbers
Contact Size or
Code Letter
30 #20, 2 coax
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
25 26 27 28 29 30
A1 A2
1 2 3 4 5 6
7 8 9 10
1 2 3 4 5 6
1 2 3 4 5 6
7
7
1 2 3 4 5 6
7
8 9 10 11 12
13
14
8 9 10 11 12
13
8 9 10 11 12
13
14
14
A1
15 11 12 13
14
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
16
17 18
19
20 21 22
20
20
21
21
22
22
23
23
23
24
24
24
20 21 22
23 24
25
25
26
26
27
27
28
28
29
29 30 31
25
25
26
27
28 29 30 31
26
27
28 29 30 31
32 33 34 35 36 37 38 39
32 33 34 35
32 33 34 35
36 37 38 39
36 37 38 39 40 41 42 43 44 45
40
A1 A2 A3
A4 A5 A6 A7
1500 (1-30),
1000 (A1,A2)V
1500 (1-28),
1000 (29-32)V
1000
1500V
1500 (1-39)
1000 (A1)V
1500V
24 #20 H.D.
4 #16, 4 coax
29 #22
7 coax (Size 5)
40 #20
39 #20,
1 coax
45 #20
32W2
32A2
32B2
32C2
D32C2
32F2
32G2
32W4
32C4
B32C4
C32C4
D32C4
E32C4
H32C4
40
40W1
40B1
40F1
F40C1
45
30
2
30
2
30
2
30
2
30
2
30
2
30
2
4
24
4
4
24
4
4
24
4
4
24
4
4
24
4
4
24
4
4
24
4
40
39
1
39
1
39
1
39
1
45
20
coax
20
B
20
A
20
D
20
J
20
P
20
C
coax
20 H.D.
16
S
20 H. D.
16
H
20 H. D.
16
R
20 H. D.
16
G
20 H. D.
16
AA
20 H. D.
16
AB
20 H. D.
16
20
20
coax
20
B
20
P
20
J
20
1-30
A1,A2
29-32
1-7, 10-22
25-28
8, 9, 23, 24
1-40
1-39
A1
1-45
**Crimp rear release coaxial contacts.
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
29
For coax contacts see page F-34
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 53
H-54 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA/ME
NOTE: See pages 62-65 for Coaxial Contact data
See pages 57-58 for Crimp Contact data
Contact
Arr.
57 57 #20
1 2 3 4 5 6 7
1 2
3 4 5
6 7
8
8
9
9
11
11
10
10
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22 23 24 25 26 27 28
22 23 24 25 26 27 28
29
29
30 31 32 33 34 35 36 37 38
30 31 32 33 34 35 36
37
38
39 40 41 42
39 40 41 42
43 44 45 46 47
43 44 45 46 47 48
48
49
49
50
50
51
51
52 53 54
52 53 54
55 56 57
55
56
57
58 59 60 61 62 63 64 65 66 67
1 12
25
39
52
66
79
93
106
13
26
40
53
67
80
94
1500V 57 57 20 1-57
1-2, 6-67
3, 4, 5
1-106
20 H.D.
16
22
64
3
106
67
A106
1500 (3-5)
1000 (1, 2,
6-67)V
1000V
64 #20 H.D.
3 #16
106 #22
**Crimp rear release coaxial contacts.
†A106 arrangements have the POS-ALINE connector design. See below.
NOTE: Engaging force of each layout arrangement shall not exceed 45 lbs. maximum.
For high density A106 contact arrangement PLUG INSULATOR
PIN SOCKET
In the POS-ALIGN connector construction the entire pin contact is recessed in an individual cavity in the
plug insulator while the sturdy socket members are exposed and extend from the connector receptacle face.
There is a lead-in chamfer that guides the socket contact into the pin cavity assuring proper contact
alignment during mating and protecting the pin contact from damage and wear.
RECEPTACLE INSULATOR
67
A106†
57
67
A106†
No. of Contacts
& Wire Size Test Voltage
AC (RMS) Contact
Arr. No. No. of
Contacts Contact Size or
Code Letter Contact
Numbers
Rear inserstion, release and extraction of crimp snap-in contacts
The ITT Cannon LITTLE CAESAR contact assembly permits contacts to be inserted, released, and extracted from the rear of the connector
with a simply, expendable plastic tool.
The contact is inserted from the rear of the connector thru a cylindrical clip in the insulator until indented tines of the clip snap securely behind
the contact shoulder. The contact is released as the plastic tool is inserted into the rear of the connector, expanding the tines beyond the
contact shoulder, permitting contact extraction. The simplified contact design has a single holding shoulder and no undercuts for improved
bend resistance.
Other features of the LITTLE CAESAR contact assembly include: hard dielectric socket face with lead-in chamfers for positive mating of
contacts; good contact stability with minimum clearance between the contact and the insulator cavity wall; plus a “closed-down” design of the
insulator’s hard dielectric around each pin contact.
This LITTLE CAESAR contact assembly was selected by the National Aerospace Standards Committee as the system to be used in a major
industry connector specification, for vital programs demanding great operational reliability.
The LITTLE CAESAR contact assembly is currently available in the BKA, DPX*MA, DPK, DPDMA, and DPAMA Series.
Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series
H
Rack and Panel
Positive Contact Alignment Design
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 54
H-55
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA/ME
The crimp contacts are shipped with the connector,
not installed. Additional contacts may be ordered
using the part numbers listed below. All tools must
2222 Pin 030-1975-007
031-1113-007
030-9081-000
031-9134-001
030-9081-003
031-9134-004
030-9083-001
031-9206-004
030-1909-001
031-1059-001
030-1908-001
031-1154-000
030-2049-000
031-1151-000
030-1975-005
031-1113-008
030-2040-000
031-1046-002
030-1892-002
031-1047-002
030-1893-002
031-9206-021
030-2045-000
031-1059-002
030-1908-001
031-1154-000
030-2049-000
031-1151-000
Socket 22,24,26 M22520/2-01 M22520/2-23 CIT-DPXMA-22
M81969/1-01 A106
10,
A32W2,
40,
A40W1,
45,57
10W3
A32W4,
67
D8,
A10,
26,
A32W4,
67
D8
10
A10
A106
10,
25W2,
32W2
40,
40W1,
45,57
10W3
32W4,
67
D8,
A10,
B16W3,
26,
32W4,
67
8,
D8
10
A10
CIET-20
(274-7001-000)
CIET-20
M81969/1-02
(980-0004-805)
CIET-16
(274-7002-000)
CIET-12
(274-7003-000)
CET-8-2
(323-7004-000)
CET-4-8
(323-7008-000)
M22520/2-02
Std. Locator
Std. Locator
M22520/2-08
Standard
M22520/1-02
Std. Locator
M22520/1-11
CCH8-1 Head
CCHP-8-6
CCH4-1 Head
CCHP-4-8
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
MS-3191-1
MS-3191-1
MS-3191-1
CBT-600*
CBT600B*
CBT-600*
CBT600B*
MS-3191-3
20,22,24
20,22,24
16,18,20
12,14
8
6
Pin
Socket
Pin
Socket
Pin
Socket
Pin
Pin
Pin
Socket
* Requires air line pressure of 80 to 100 psi.
These DPXME contacts are being superseded in favor of military DPXNE/NA contacts, this applies to all existing DPXME connector assemblies, except for size 20 contacts.
Socket
Socket
2020
2020HD
1616
1212
0808
0406
4 .310 (7.87)
.250 (6.35)
.135 (3.43)
.103 (2.62)
.071 (1.80)
.054 (1.37)
6
8
12
14
16
18
20
20
22
24
22
24
26
60
46
23
17
13
-
7.5
7.5
-
3
5
-
2
60
46
23
17
13
-
-
7.5
-
3.0
5.0
-
2.0
33
39
63
60
68
-
75
83
-
68
110
-
80
8
12
16
20
22
Crimp Contacts
Part Number
Contact
Size
Contact
Size Wire
Size
Insulation (0.D.)
Limits Inch (mm)
Max.
Test Current
per MIL-C-39029
Table VI
Max. Current for
Tests (Amps)
(Mil-C-39029)
DPX MA
Commercial DPX ME
Commercial
Crimp
Tool
Part
Number
Locator
Part
Number
Insertion/
Extraction
Tool
(Part No.)
Layout Usage
DPX
ME DPX
MA
Wire
Accom.Type
be purchased separately. The insertion/extraction
tools listed are plastic type. Consult factory for
more durable metal tools.
Max. Potential Drop
(Millivolts)
at 25 C
per MIL-C-39029
1
M22520/2-01
Contact and Termination Tooling Data - Commercial
Electrical Data
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 55
H-56 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA/ME
DPXA
DPXB Two (2) pieces, solder pot.
LITTLE CAESAR rear release contact
retention assembly, crimp pot.
LITTLE CAESAR assembly, solder pot,
LITTLE CAESAR rear release contact
retention assembly, crimp pot, with
separator.
Ring-Loc, solder pot,
Environmental, connector.
Two (2) pieces, solder pot (Standard
2 pieces insert).
Ring-Loc, solder pot. (See MS)
(MAS) LITTLE CAESAR assembly,
Solder pot.
(MA) LITTLE CAESAR assembly,
crimp pot, (Cat. A)
Metal plates.
Rear release, crimp (MB type only).
Standard 2 pieces, solder pot,
both sides,
Ex: DPX2-57S57S-33-0001
Standard LITTLE CAESAR asembly,
crimp pot both sides Ring-loc coax.
EX:DPX2MA-57S57S-33-0001
LITTLE CAESAR assembly, soler po,
both sides Ring-Loc coax.
EX: DPX2MAS-57S57S-33-001
Ring-Loc, solder pot. Layout 25C3
pin only and 40C1 Pin and socket.
EX: DPX2MS-40W1S40W1S-33-0001
A side: (MAS) LITTLE CAESAR
assembly, solder pot (32W2S)
B side; Standard 2 Piece, solder
pot (57S).
Ex: DPX2CA-32W2S57S-33-0001
A side: Standard solder pot.
B side: Rear release crimp with separator.
Ex: DPX2AF-13S26S-33B-0001
A side: Ring-Loc solder pot (40W1S).
B Side: 2 Piece, Solder Pot (57S).
Ex: DPX2BA-40W1S57S-33-0001
A side: (MA) LITTLE CAESAR
assembly, Crimp (67S).
B Side: 2 Piece, solder pot (57S).
Ex: DPX3DA-67S57S-33-0001
A side: Metal plates for grounding
(Coaxes).
B side: Ring-Loc, solder pot.
Ex: DPX2EB-C1P40W1P-34B-0001
DPXAMA
DPXBMA
*NOTE: When any two of these letters are used in combination, the
inserts ("A" and "B") side have the style contacts indicated
(see table opposite for examples).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Class
None D* DPX2CA-/
DPX2AC-
(Reverse
CA)
DPX2AF
DPX2BA
DPX2DA
DPX2EB
E*
F*
DPX2-
DPX2MA
DPX2MAS
DPX2MS-
MA
MAS
MB
MS
ME
A*
B*
C*
Series DPX Insert Type Class Series DPX Insert Type Class Series DPX Insert Type
DPXMA (LIF) Crimp Contacts
DPXMA Thermocouple Contacts
Contact Size
and Part Numbers
Part Number
Size Pin Socket MIL
Spec ITT
Cannon MIL
Spec MIL
Spec
ITT
Cannon
Se-
lec
tor#
Tool P/N Locator P/N ITT Cannon
Insertion Extraction Ins./Ext. AWG Insul
Dia. Max. Strip
Length
Crimp Tooling Insertion/
Extraction Tooling Wire Size
Contact Size
and Part Numbers
Part Number
Size Pin Socket MIL
Spec ITT
Cannon MIL
Spec MIL
Spec
ITT
Cannon
Se-
lec
tor#
Tool P/N Locator P/N ITT Cannon
Insertion Extraction Ins./Ext. AWG Insul
Dia. Max. Strip
Length
Crimp Tooling Insertion/
Extraction Tooling Wire Size
222
030-2259-000
030-2273-000
030-2280-000
030-2286-000
031-1287-000 M22520
/2-01 M22520
2-23 M81969
/1-01
CIT-DPXMA-22-1
Metal
(070256-0000)
CET-DPXMA-22
Metal
(070317-0000)
(980-0004-804)
Metal Tip
26
24
22
.054
(1.37) .130/.110
(3.30/2.54)
.167/.147
(4.24/3.73)
.270/.230
(6.86/5.84)
.270/.230
(6.86/5.84)
.071
(1.80)
.103
(2.62)
.135
(3.43)
22
20
20
18
16
14
12
(980-0004-805)
Metal Tip
(980-0004-806)
Metal Tip
CIET-12
Plastic
(274-7003-000)
CET-16-9
Plastic
(323-7001-000)
CET-12-4
Plastic
(323-7002-000)
--
-
-
M81969
/1-02
M81969
/1-03
M81969
/14-04
995-0002
-015
995-0001
-604
995-0001
-736
995-0002
-027
M22520
/2-08
M22520
/1-02
M22520
/1-11
995-0001
-584
995-0001
-584
995-0001
-585
995-0001
N Type Thermocouple NICROSIL-NISIL
J Type Thermocouple IRON-CONSTANTAN
K Type Thermocouple CHROMEL / ALUMEL
-585
3
3
4
6
7
4
5
6
7
8
M22520
/2-01
M22520
1-01
M22520
1-01
031-1302-000
031-1303-000
031-1308-000
2020HD
1616
1212
2222
Alumel
030-1975-009
031-1113-009 M22520
/2-01 995-0001
-584 M22520
/2-23 995-0002
-015 (980-0004-804)
Metal Tip .054
(1.37) .130/110
(3.30/2.54)
26
24
22
M81969
/1-01
CIT-DPXMA-22-1
Metal
(070256-0000)
CET-DPXMA-22
Metal
(070317-0000)
3
3
4
031-1113-010
030-1975-010
030-2163-000 031-1243-000
030-2162-000 031-1242-000
030-1898-000 031-1035-000
030-1897-000 031-1034-000
2222
Chromel
20HD
Chromel
20HD
Alumel
1616
Chromel
1616
Alumel
.167/.147
(4.24/3.73)
.071
(1.80)
22
20
(980-0004-805)
Metal Tip
--
M81969
/1-02
995-0001
-604
M22520
/2-08
995-0001
-584 6
7
M22520
/2-01
.167/.147
(4.24/3.73)
.071
(1.80)
22
20
(980-0004-805)
Metal Tip
--
M81969
/1-02
995-0001
-604
M22520
/2-08
995-0001
-584 6
7
M22520
/2-01
.270/.230
(6.86/5.84)
.103
(2.62)
20
18
16
(980-0004-806)
Metal Tip
CET-16-9
Plastic
(323-7001-000)
-
M81969
/1-03
995-0001
-736
M22520
/1-02
995-0001
-585
4
5
6
M22520
1-01
.270/.230
(6.86/5.84)
.103
(2.62)
20
18
16
(980-0004-806)
Metal Tip
CET-16-9
Plastic
(323-7001-000)
-
M81969
/1-03
995-0001
-736
M22520
/1-02
995-0001
-585
4
5
6
M22520
1-01
030-1905-000 031-1061-000
1616
Constantan .270/.230
(6.86/5.84)
.103
(2.62)
20
18
16
(980-0004-806)
Metal Tip
CET-16-9
Plastic
(323-7001-000)
-
M81969
/1-03
995-0001
-736
M22520
/1-02
995-0001
-585
4
5
6
M22520
1-01
030-1904-000 031-1060-000
1616 .270/.230
(6.86/5.84)
.103
(2.62)
20
18
16
(980-0004-806)
Metal Tip
CET-16-9
Plastic
(323-7001-000)
-
M81969
/1-03
995-0001
-736
M22520
/1-02
995-0001
-585
4
5
6
M22520
1-01
Constantan
See DPDMA contact for standard size 20 thermocouple contacts
Description of Modification Codes for Special Connector Insert Assemblies
H
Rack and Panel
Contact and Termination Tooling Data
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 56
H-57
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Solder
Rear Extension
from insulator
Contact
type
code
A
B
C
D
I
J
K
L
M
N
O
Part Number
Pin
249-0672-000
.209 (5.31)
.209 (5.31)
.106
(2.69) DIA.
.125 (3.18)
DIA.
.149 (3.78) DIA.
.579
(14.71) .250
(6.35) DIA.
.735
(18.67) .127
(3.23) DIA.
.616
(15.65) .085
(2.16) DIA.
.117 (2.97)
.181 (4.60)
.237 (6.02)
4.58 (11.63)
* These coaxial contacts are supplied with the connector.
.209 (5.31)
.209 (5.31)
.067 (1.70) DIA. 249-0671-000 RG-187/U
RG-188/U
C7A, B16C3,
G25C3, C30C4,
A32C2, L40C1
C7B, J25C3,
C16C3, C32C2,
40C1
C7H, G16C3,
F25C3, D32C2,
F40C1
C7J, H16C3,
H25C3, F32C2,
E30C4, E40C1
10C3
A10C3
25C3, 32C2,
J16C3, A40C1,
C7, C7D
A40C1 pin only, use C40C1 for socket
See Note 1
See Note 2
8
8
RG-180/U
RG-195/U
RG-55/U
RG-58/U
RG-223/U
RG-55/U
RG-58/U
RG-223/U
RG-187/U
RG-188/U
7.5 amp #20 wire
13 amp #16 wire
23 amp
#12 wire
RG-59/U
RG-7/U
249-0703-000
249-0750-000
249-0518-000
249-0353-000
249-0268-000
249-0591-000
024-0015-000
253-0120-000
330-0145-000
031-0016-008
031-0059-008
-
249-0702-000
249-0749-000
249-0365-000
249-0257-000
249-0583-000
024-0015-000
253-0120-000
330-0144-000
030-0056-010
030-0017-015
-
-
Socket Cable
Accommodation Layout
Accommodation
Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 57
H-58 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Solder
Rear Extension
from insulator
Contact
type
code
R
Z
AA
AB
AC
NOTES: 1. Code L-10C3, A10C3,17, 23, 25C3, E25C3, F25C3, G25C3. H25C3,J25C3, Q25C3, R125C3, 30C4, A30C4, C30C4, D30C4, E30C4, 32, 32C2, A32C2, C32C2, 032C2, F32C2, M32C2, N32C2
Q32C2, 40, 40C1, B40C1, D40C1, E40C1, F40C1, H40C1, J40C1, K40C1, L40C1, 45, 57, 67,
2. Code M-B16C3, C16C3, G16C3, H16C3, M16C3, ZE16C3, ZF16C3, 26, 30C4, 32, 67
Code Letter
A
B
C
D
E
I
J
K
Z
AA
AB
AC
R
A
.166/.146
.166/.146
.166/.146
.166/.146
.166/.146
.166/.146
.166/.146
.198/.178
.08
.11
.238/.198
.345/.281
.238/.198
Inches
1.250 APP.
(31.75)
.440 (11.18) DIA
.206 (5.23) DIA.
.768
(19.51)
.364
(9.25) .093 (2.36) DIA.
.040 (1.02) DIA.
.750 APPROX.
(19.05)
.224 (5.69) DIA.
1.250 APPROX.
(31.75)
.438 (11.13) DIA.
B
AC
INNER CONDUCTOR
DIELECTRIC
BRAID
JACKET
.140
(3.56) DIA.
Millimeters
B
.358/.318
.358/.318
.358/.318
.358/.318
.358/.318
.39
.55
.488/.428
.41
.23
.233/.193
.516/.484
.233/.193
C
.14
.14
.14
.14
.14
.166/.146
.166/.146
.25
.23
.195/.175
.447/.427
.359/.296
.582/.542
A
4.22/3.71
4.22/3.71
4.22/3.71
4.22/3.71
4.22/3.71
4.22/3.71
4.22/3.71
5.03/4.52
2.03
2.79
6.04/5.03
8.71/7.14
6.05/5.03
B
9.08/8.08
9.08/8.08
9.08/8.08
9.08/8.08
9.08/8.08
9.91
13.97
11.38/10.87
10.41
5.84
5.92/4.90
13.1/12.3
5.92/4.90
C
3.55
3.55
3.55
3.55
3.55
4.21/3.71
4.21/3.71
6.35
5.84
4.95/4.45
11.35/10.89
9.12/7.52
14.8/13.8
Part Number
Pin
249-1521-000
249-1624-000
249-1599-000
249-1554-000
Consult Factory
249-1522-000
249-1598-000
249-1622-000
249-1822-000
249-5027-001
RG-9/U, RG-214/U
RG-58/U
with Capitve
Contact
RG-196/U
with Captive
Contact
RG-58/U
RG-9/U
RG-214/U
C2
C7AA, ZE16C3
Q25C3, A30C4
M32C2, J40C1
C7X, ZF16C3,
R25C3, B30C4,
N32C2, K40C1
C2C
C2M
Socket Cable
Accommodation Layout
Accommodation
Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.)
H
Rack and Panel
Suggested Cable Trim Dimensions
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 58
H-59
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Solder
ITT Cannon recommends resistance soldering for all
solder contacts, particularly for RF cable where
excessive heat will damage the dielectric. Wires
For Codes A, B, C, D, and E
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Remove inner contact from coaxial assembly
and solder it to inner conductor of cable.
3. Push inner contact back into coaxial assembly.
4. Pull outer conductor over coaxial shell, and
solder.
5. Apply shrink sleeving after assembly.
For Codes I and J
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Comb braid, tin conductor and remove flux.
3. Remove solder pot cover. Insert cable and
solder conductor to contact. The dielectric
should butt against contact solder pot.
4. Replace solder pot cover and solder braid to
ferrule.
5. Apply shrink sleeving after assembly.
For Codes K
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Unscrew cap and remove spacer and inner
contact from coaxial assembly.
3. Push cable through center of cap and spacer.
4. Solder inner. contact to inner conductor of
cable.
5. Push inner contact back into coaxial shell as-
sembly and attach cap.
6. Separate outer conductor of cables into two
pigtails 180˚ apart.
7. Attach on pigtail to each end of cap strip and
solder.
8. Apply shrink sleeving after assembly.
For Codes Z and AA
1. Cut cable evenly. Trim to dimensions as shown
on page 60. Care should be taken not to injure
the conductor or dielectric.
2. Solder inner conductor to coaxial contact
through side slot in coaxial with outer sleeve
pushed back on cable.
3. Pull sleeve forward over braid and solder
through holes in sleeve.
4. Solder sleeve to coaxial body.
should be pre-tinned. Bushing, endbells, and junc-
tion shells (where applicabe) must be slipped over
wire bundles before soldering is started. Consult
JACKET
2.
3.
4.
CAP SPACER
INNER CONDUCTOR
INNER CONTACT
OUTER SLEEVE
CONTACT
REAR INSULATOR
SHELL
ASSY FRONT INSULATOR
CAP STRIP
OUTER
CONDUCTOR
OUTER CONDUCTOR
COAXIAL SHELL
INNER CONDUCTOR
INNER CONTACT
factory for types not shown. The mechanical steps
in wiring coaxials described below.
Coaxial Cable Assembly
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 59
H-60 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
NOTES:
*P for pin; S for socket.
A*RG-59/U
RG-62/U P-249-1397-000
S-249-1398-000
P-249-1399-000
S-249-1400-000
P-249-1401-000
S-249-1402-000
P-249-1403-000
S-249-1404-000
P-249-1405-000
S-249-1406-000
P-249-1633-000
S-249-1634-000
Ring Loc .760 (19.30)
CA58073
CCT-HX4-524
CCT-408M
CCT-HX4-524
CCT-408M
CCT-HX4-524
CCT-408M
CA58073
CCT-HX3-156
CA58073
CCT-HX3-156
CCT-HX4-524
CCT-408M
Solder
Crimp
CA58073
CET-C4
(038869-0004)
CET-C4
(038869-0004)
CET-C4
(038869-0004)
CET-C8
(323-7011-000)
CET-C8
(323-7011-000)
CET-C8
(323-7011-000)
CET-C8
(323-7011-000)
CET-C8
(323-7011-000)
.158 (4.01)
.148 (3.76)
.128 (3.25)
.118 (3.00)
.128 (3.25)
.118 (3.00)
.072 (1.83)
.062 (1.57)
.072 (1.83)
.062 (1.57)
.072 (1.83)
.062 (1.57)
.128 (3.25)
.118 (3.00)
.072 (1.83)
.062 (1.57)
.158 (4.01)
.148 (3.76)
.130 (3.30)
.120 (3.05)
.158 (4.01)
.148 (3.76)
.130 (3.30)
.120 (3.05)
.130 (3.30)
.120 (3.05)
.275 (6.53)
.247 (6.27)
.211 (5.36)
.201 (5.10)
.166 (4.22)
.156 (3.96)
.121 (3.07)
.111 (2.82)
.091 (2.31)
.081 (2.06)
.121 (3.07)
.111 (2.82)
.235 (5.97)
.215 (5.46)
.091 (2.31)
.081 (2.06)
.238 (6.04)
.228 (5.79)
.238 (6.04)
.228 (5.79)
.238 (6.04)
.228 (5.79)
.211 (5.36)
.201 (5.10)
.273 (6.93)
.263 (6.68)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.775 (19.68)
.592 (15.04)
.592 (15.04)
.592 (15.04)
.592 (15.04)
.500 (12.70)
798 (20.27)
Ring Loc
Ring Loc
Ring Loc
Ring Loc
Ring Loc
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
Ring Loc
S-249-1608-000
P-249-1670-000
S-249-1671-000
P-249-1474-000
S-249-1471-000
P-249-1958-000
S-249-1959-000
P-249-1960-000
S-249-1961-000
P-249-1631-000
S-249-1632-000
P-249-1388-000
S-249-1390-000
*RG-58/U
RG-174/U, RG-187/U
RG-179/U, RG-188/U
RG-174/U, RG-187/U
RG-179/U, RG-188/U
*RG-58/U with nylon
braid over jacket
*RG-180/U
RG-195/U
RG-178/U
RG-196/U
*RG-178/U
RG-196/U
RG-59/U
RG-62/U
RG-55/U
RG-142/U
RG-59/U
RG-62/U
RG-58/U
RG-58/U
B
C
D
E
H
P
R
F
S
T
G
J
B16W3
25W3
32W2
40W1
B16W3
25W3
32W2
40W1
W8
32W4
W8
32W4
W8
32W4
W8
32W4
W16W3
25W3
32W2
40W1
XY DIA.
Z DIA.
XY DIA.
Z DIA.
X
Y DIA.
Z DIA.
X
Y DIA.
Z DIA.
Arr.
Used In Code
Letter Cable
Accommodation Contact
Retention X
Max. Y
Dia. Z
Dia. Extraction
ToolPart Number* Crimp Tool
Codes A, B, C, D, E, H, P, R
Codes F, S, T
*IMPORTANT: These coaxials can only be used in the DPX*MAS or DPX*MB Connector Series.
Codes G
Codes J
1. The "X" dimension is take from the rear of the shell.
2. Codes G and S are inactive for new design. Use codes AD and AE.
3. Code AA is designed for installations that have limited space in the terminal area. Use code AG for standard installations.
Coaxial Contacts
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 60
H-61
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
CODE K
K
L
U
V
AC
AA
AB
AD
AE
AF
AG
CODE L
CODE U
CODE V, AC
CODE AA, AB, AD, AE, AF, AG
Arr.
Used In Code
Letter Cable
Accommodation Contact
Retention X
Max. Y
Dia. Z
Dia. Extraction
ToolPart Number* Crimp Tool
X
Y DIA.
Z DIA.
X
Y DIA. Z DIA.
.500 (12.70)
X
X
Y DIA.
Y DIA.
Z DIA.
Z DIA.
XY DIA.
Z DIA.
B16W3
25W3
32W2
40W1
B16W3
25W3
32W2
40W1
W8
10W3
W8
32W4
RG-178/U
RG-196/U P-249-1384-000
S-249-1413-000 Ring Loc
Ring Loc
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR
LITTLE
CAESAR .575 (14.60)
.260 (6.60)
.800 (20.32)
.800 (20.32)
.425 (10.80)
.518 (13.16)
.906 (23.01) .045 (1.14)
.035 (0.89) Solder
Solder CET-C4
(038869-0004)
CET-C4
(038869-0004)
CET-C8
(038869-0004)
CET 4-8
(323-7008-000)
CET-C8
(323-7011-000)
CCT-C10
Buchanan
612991
T & B #WT400
Daniels
HX4-210
.098 (2.49)
.088 (2.24)
.098 (2.49)
.088 (2.24)
.117 (2.97)
.107 (2.72)
.356 (9.04)
.349 (8.86)
.356 (9.04)
.349 (8.86)
.126 (3.20)
.122 (3.10)
.168 (4.27)
.158 (4.01)
.045 (1.14)
.035 (0.89)
.069 (1.75)
.059 (1.50)
.260 (6.60)
.254 (6.45)
.205 (5.21)
.199 (5.05)
.088 (2.24)
.084 (2.13)
.114 (2.90)
.104 (2.64)
P-249-1386-000
S-249-1414-000
S-249-1883-000
P-249-1956-000
S-249-1957-000
S-249-1977-000
P-249-1968-000
P-249-1982-000
S-249-1983-000
P-249-2017-000
S-249-2018-001
P-249-2019-001
S-249-2020-001
P-249-1633-004
S-249-1634-003
P-249-2061-000
S-249-2062-001
RG-178/U
RG-196/U
RG-178/U
RG-196/U
RG-180/U
RG-195/U
RG-178/U
RG-196/U
RG-174/U, RG-187/U
RG-179/U, RG-188/U
RG-174/U, RG-187/U
RG-179/U, RG-188/U
RG-115/U
RG-58/U
RG-58/U
RG-142/U
Coaxial Contacts
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 61
H-62 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
Components/Accessories
RING TYPE RETENTION (A32W2 & A40W1 CONTACT ARRANGEMENTS)
Coaxial Contact Assembly Recommendations
(For Codes A, B, C, D, E, J, K, L and P)
Part Number*
Without Seal (MA) Sealed (ME) Seal 1 Seal 2
Ins. Dia.
Size/Max. 'A' Trim
Dim. Crimp
Tool
Cable Trim
Dimensions
WITHOUT SEAL
SEALED
Cable Accommodation
NOTE:
32W2 (MA Version)
A32W2 (ME Version)
123456
123456
7
7
89101112
8
9
101112
13
13
141516
141516
1718
1718
1920
19
20
2122
2122
23
23
24
24
2526272829
2526272829
30
3031
3233343536373839
A1
A1
A2
40W1 (MA Version)
A40W1 (ME Version)
.420 (10.67)
.400 (10.16)
A
(For Codes A, B, C, D, E, J, K, L and P)
SOCKET
PIN
SOCKET
PIN
BUSHING
BUSHING
SEAL
SEAL 2
SEAL 1
.330 (8.38)
.310 (7.86)
P-249-1397-001
S-249-1398-003
P-249-1399-001
S-249-1400-003
P-249-1401-001
S-249-1402-003
P-249-1403-001
S-249-1404-003
P-249-1405-001
S-249-1406-003
*P for pin, S for socket
†Unsealed accomodates both Seal 1 & Seal 2 Cables.
††For use with connectors supplied less grommet ( Code 29**, etc.)
1. Center contact, rear insulator, crimp ring, support bushing and seal sleeve are packaged separately and
shipped with the coaxial assembly.
2. Use impact extraction tool no. CET-C4 (038869-0004). An insertion tool is not required. (See Item 4).
3. Cable Assembly Instructions
4. To extract coaxial, push back seal sleeve and support bushing. Then push out coaxial from engaging end
with CET-C4 (038869-0004) impact tool.
5. When crimping with CA58073 crimp tool, care should be taken to avoid flaring the front end of the
crimp ring. Place Crimp jaw so that the second tooth of the indentors is over the end of the crimp ring.
6. To facilitate extraction of contacts and avoid splaying the length of free cable adjacent to the rear
surface of the connector should not be less then 2.000 (50.80).
Step 1- If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off
seal 1 portion
Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket.
Step 3 - Trim cable per illustration.
Step 4 - Place rear insulator over dielectric.
Step 5 - Solder innerconductor to center contact.
Step 6 - Insert soldered cable firmly into coaxial with shielding over coaxial shell.
Step 7 - Pull crimp ring forward until stopped and crimped.
Step 8 - Insert coaxial assembly into connector until engaged. Push support bushing into grommet
until shoulder rest on tublular extension. Then pull seal sleeve forward until it is snug
against grommet.
P-249-1397-002
S-249-1398-002
P-249-1399-002
S-249-1400-002
P-249-1401-002
S-249-1402-002
P-249-1403-002
S-249-1404-002
P-249-1405-002
S-249-1406-002
X
RG58B
RG195
RG179B
RG179B, RG196
RG59B, RG62A
X
RG180B
RG174, RG179B,
RG316
X
.249 (6.32)
.200 (5.08)
.158 (4.01)]
.113 (2.87)
.083 (2.11)
.435 (11.05)
.415 (10.54)
.460 (11.68)
.440 (11.18)
.460 (11.68)
.440 (11.18)
.460 (11.68)
.440 (11.18)
.480 (12.19)
.460 (11.68)
CA58073
CA58073
CA58073
CCT-406M
CCT-406M
The A32W2 & A40W1 (Ring Type Retention); AW8 & A32W4 (LITTLE CAESAR Renention) Coaxial Contact arrangements have been
redesigned to provide ease of insertion/removal of the coaxial contacts. Sealing is accomplished with the addiction of sealing sleeves
provided with the coaxial contact assembly.
DPX*MA/ME Coaxial Contact Data (for environmental requirements)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 62
H-63
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
Components/Accessories
LITTLE CAESAR® CONTACT RETENTION (A32W4 & AW8 CONTACT ARRANGEMENTS)
Coaxial Contact Assembly and Extraction Recommendations WITHOUT SEAL
Cable Trim Dimensions
SEALED
Part Number*
Without Seal†† (MA) Sealed (ME) Seal 1 Seal 2
Ins. Dia.
Size/Max. 'A' Trim
Dim.
Cable Accommodation†
32W4** (MA Version)
A32W4 (ME Version)
1 1 2
3 4
5 6 7 8
10 8
16
25
7
9 15
24 22
28
29 30 31 32
23
W8** (MA Version)
AW8 (ME Version)
P-249-1633-004
With Seal
CU 249-0000-047 & -045
Without Seal
CU 249-0000-044 & -046
S-249-1634-003
P-249-1982-000
S-249-1983-000
P-249-2017-001
S-249-2018-001
P-249-2019-001
S-249-2020-001
P-249-2061-001
S-249-2062-001
1. Use Crimp Tool No. DIE Y211 (995-0002-249), Tool M22520 / 5-01 (995-
0001-761).
2. Use extraction tool No. CET-C8. An insertion tool is not required.
(See Note 5).
3. Center contact, rear insulator, crimp ring, support bushing (not applicable to
RG58/RG142 coaxials), seal sleeve, front insulator, shell and ferrule are
shipped unassembled in a common container.
4. Cable Assembly Instructions:
Step 1 - If applicable, determine which portion of seal sleeve should be
used. If seal 2 is used, cut off seal 1 portion.
Step 2 - In sequence, place seal sleeve, support bushing and crimp ring
over cable jacket.
Step 3 - Trim cable per illustration.
Step 4 - Comb out braid and flare out ends to permit entry of ferrule.
Step 5 - Complete termination per illustration. (See below)
5. To extract: coaxial, push back seal sleeve and support bushing. Slip cable into ex-
traction tool. Push tool into insert until it contacts coaxial retaining shoulder. Grip
both cable and tool with one hand and pull coaxial rearward out of insert cavity.
6. To facilitate extraction of contacts and avoid splaying, the length of free cable
adjacent to the rear surface of the connector should not be less than 2.000
(50.80).
A. Carefully push inner conductor through rear insulator.
B. While holding rear insulator firmly against ferrule, trim conductor to .156
(3.96)/.146 (3.71) dimension.
C. Place contact over conductor and solder.
.035 (0.89)
.030 (0.76)
.156 (3.96)
.146 (3.71)
FERRULE BRAID
CONTACT
REAR INSULATOR
CRIMP AREA
FRONT INSULATOR
COAXIAL SHELL
.350
(8.89)
APPROX.
A. Push ferrule under braid as far as it will go. Trim off braid extending beyond
shoulder of ferrule, if necessary.
B. While holding ferrule in place pull crimp sleeve forward over braid until it is
tight against shoulder an ferrule. Pull firmly against face of ferrule to make
sure it is up tight.
C. Trim dielectric to the .035 (0.89)/.030 (0.76) dimension.
A. Place front insulator over contact and then push assembly into coaxial shell.
B. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp
sleeve. Press sleeve firmly into coaxial shell and crimp.
C. After assembled coaxial is inserted into connector, push support bushing into
grommet until shoulder rests on tubular extension. Then pull sealing sleeve
forward until it is snug on grommet.
SOCKET
SOCKET
BUSHING
BUSHING
SEAL
SEAL 1
SEAL 2
PIN PIN
SOCKET
.610 (15.49)
.590 (14.99)
A
PIN
*P for Pin. S for Socket
Unsealed accommodates both Seal 1 & Seal 2 cables. CU DWGS with seal 249-0000-044 and 249-0000-045
For use with connector supplied less grommet (Code-29**, etc.). CU DWGS without seal 249-0000-047 and 249-0000-046
P-249-1633-003
S-249-1634-002
P-249-1982-001
S-249-1983-001
P-249-2017-000
S-249-2018-000
P-249-2019-000
S-249-2020-000
P-249-2061-000
S-249-2062-000
RG179
RG180B
RG58C
RG142B
RG178B
RG174, RG316,
RG179B
RG195
X
X
X
.111 (2.82)
.158 (8.89)
.196(4.98)
.196 (4.98)
.075 (1.90)
.350 (8.89)
.330 (8.38)
.260 (6.60)
.250 (6.35)
.260 (6.60)
.250 (6.35)
.260 (6.60)
.250 (6.35)
.260 (6.60)
.250 (6.35)
{
{
{
{
DPX*MA/ME Coaxial Contact Data (for environmental requirements)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 63
H-64 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
LITTLE CAESAR Contact Assembly Data
For Codes G, H and R
For Codes F, S and T
1. Strip and trim cable as shown on page 60.
2. Solder inner conductor to coaxial contact with crimp ring over braid and rear insulator over inner
conductor.
3. Insert cable into coaxial with shell under braid. Crimp ring with Cannon crimp tool CA58073.
1. Strip and trim cable as shown on page 60.
2. Solder inner connector to coaxial contact with crimp ring pushed back on cable.
3. Insert cable into coaxial and pull ring forward over braid. Crimp ring with Cannon crimp tool
CA58073-0001 or CCT-408M. After crimping, crimp ring must not exceed .252 (6.40) diameter.
1. Strip and trim cable as shown on page 60.
2. Slide crimp ring over braid and jacket of cable.
3. Unbraid exposed portion of braid and fold braid wires backward over outside of crimp ring.
4. Insert prepared wire into right angle fitting of shell assembly. Conductor should be aligned in slot of the
center contact. Crimp with Cannon tool CCT/C10.
5. Solder center conductor of cable to contact. Insert cap and solder in place.
1 . Slip ferrule over cable jacket. Trim outer jacket. Comb out braid as shown. Retrim braid.
2. Bend up combed out braid at right angles to cable. Slide ferrule up to bend and fold braid back against
ferrule.
3. Slide rear insulator over dielectric as shown. Press insulator firmly against folded back braid and trim
dielectric flush with insulator. Then cut inner conductor to length shown.
4. Place contact over conductor. Press contact and insulator firmly against braid and solder contact to
conductor.
5. Push cable assembly into shell, pressing against rear of ferrule and crimp area shown with T. & B.
#WT-400 Crimp Tool while making sure parts do not move out of place.
1 . Trim jacket to .680 (17.27)/.660 (16.76) dimension. Then slide ferrule over braid until it stops
against jacket, and comb out exposed portion of braid.
2. Fold combed braid over ferrule as shown. Then trim dielectric to .070 (1.78)/.060 (1.52) dimension
and slide rear insulator over dielectric until it presses against braid.
3. Press insulator against braid and trim inner conductor to .247 (6.27)/.237 (6.02) dimension. Then place
contact over conductor and crimp with MS3191-3 (do not use MS3191-1). Press parts firmly
against locator during crimping operation.
4. Place front insulator over contact. Push parts into coaxia! shell. While holding parts firmly against stop
shoulder in coaxial shell, place jaw of crimp tool at back end of shell and crimp. Use Buchanan crimp
tool #612991 (.343 [8.71) across hex].
FERRULE
CRIMP AREA
SHELL
CONTACT
REAR INSULATOR
JACKET
FERRULE
DIELECTRIC
JACKET
COAXIAL SHELL
REAR INSULATOR
CONTACT
FRONT
INSULATOR
.400 APPROX.
(10-16)
.680 (17.27)
.660 (16.76)
.198 (5.03)
.034 DIA.
(0.86)
.156 (3.96)
.136 (3.45)
.250 (6.35)
.230 (5.84)
.070 (1.78)
.060 (1.52)
.247 (6.27)
.237 (6.02)
.070 (1.78) MAX.
For Codes U
For Codes AA
For Codes AC
Coaxial Cable Assembly Recommendations
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 64
H-65
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX*MA Crimp
For Code V
1. Trim cable to dimensions shown below.
A. Push ferrule under braid as far as it will go and press braid down tightly around ferrule.
B. Solder ends of braid to ferrule by applying a small amount of solder. Avoid excess solder as it would
cause braid to swell up.
C. Remove any solder exceeding the .349 (8.86) max. diameter.
D. Check the .075 (1.90) max. dielectric extension, retrim if necessary.
3. A. Place rear insulator over dielectric and conductor into contact.
B. Solder contact to conductor through access hole.
C. Remove excess solder from outside of contact.
4. A. Place front insulator over contact.
B. Push parts into coaxial shell.
C. While holding parts firmly against stop shoulder in coaxial shell, place jaw of crimp tool at back end
of shell and crimp, use Buchanan crimp tool #612991 [.343 (8.71) across hex].
For Codes AB, AD, AE, AF and AG
Setp 1 - Trim cable as shown.
Step 2 - Flare out ends of braid to permit entry of ferrule.
Step 3 - Complete termination per instructions as shown below.
a. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrul, if
necessary.
b. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder on
ferrule. Push firmly against face of ferrule to make sure it is up tight.
c. Trim dielectric to the .035 (0.89)/ .030 (0.76) dimension.
d. Carefully push inner conductor through rear insulator.
e. While holding rear insulator firmly against ferrule, trim conductor to .156 (3.96)/.146 (3.71)
dimension.
f. Place contact over conductor and solder.
g. Place front insulator over contact and then push assembly into coaxial shell.
h. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp sleeve. Press
Sleeve firmly into coaxial shell and crimp. Use Daniels crimp tool HX4-210.
Code
Letter
A
B, C, D & P
E
F
G
H & R
J
K
L
S
U
V
T
AA, AC
AB, AD, AE, AF, AG
.420/.400
.420/.400
.420/.400
.785/.745
.490/.470
.581/.561
.326/.306
.410/.390
.385/.365
.678/.658
.940/.920
.550/.540
.598/.578
.432/.415
.460/.440
.480/.460
.275/.255
.275/.255
.345/.325
.250/.230
.290/.270
.244/.224
.275/.255
.760/.740
.415/.405
.300/.280
.330/.310
.330/.310
.330/.310
.228/.208
.156/.136
.156/.136
.088/.068
.088/.068
.074/.064
.156/.136
.080/.060
.250/.240
.228/.208
See page 60 for dimensions
See page 60 for dimensions
.10.67/10.16
10.67/10.16
10.67/10.16
19.94/18.92
12.45/11.94
14.76/14.25
8.28/7.77
10.41/9.91
9.78/9.27
17.22/16.71
23.88/23.37
13.97/13.72
15.19/14.68
11.05/10.54
11.68/11.18
12.19/11.68
6.98/6.48
6.98/6.48
8.76/8.26
6.35/5.84
7.37/6.86
6.20/5.69
6.98/6.48
19.30/18.80
10.54/10.29
7.62/7.11
8.38/7.87
8.38/7.87
8.38/7.87
5.79/5.28
3.96/3.45
3.96/3.45
2.24/1.73
2.24/1.73
1.88/1.63
3.96/3.45
2.03/1.52
6.35/6.10
5.79/5.28
INNER CONDUCTOR
CRIMP AREA
REAR INSULATOR
CONTACT
Crimp Sleeve
.400 APPROX.
(10.16)
FRONT INSULATOR
0.75 MAX.
(1.90)
.349 DIA. MAX
(8.86)
SOLDER ALL AROUND FERRULE
FERRULE
.156 (3.96)
.146 (3.71)
.035 (0.89)
.030 (0.76)
.260 (6.60)
.250 (6.35)
.610 (15.49)
.590 (14.99)
FRONT INSULATOR
COAXIAL SHELL
.350 APPROX
(8.89)
DIELECTRIC
BRAID
JACKET
C
A
B
Inches Millimeters
AB CAB C
Coaxial Cable Assembly Recommendations (Continued)
Cable Trim Dimensions
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 65
H-66 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
DPXA Modifications Codes
- 4. Mounting holes .120 (3.05) dia. c'sink 100˚ to .225 (5.72) dia.
- 5. 4-40 clinch nuts.
- 6. Removable insert retainer plate.
- 7. Mounting holes .120 (3.05) dia. c'sink 82 to .230 (5.84) dia.
-12. Mounting holes .132 (3.35)/.125 (3.18).
-16. A106 insert with separator.
-17. With grommet and mounting holes .120 (3.05) dia. countersunk 100˚ to .225 (5.72) dia.
-70. Standard mounting with (LIF) contacts.
-77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data).
DPXB and DPX2/3/4 Modification Codes
Some of the modification numbers used in the DPX only certain types. The following chart gives the type in which they may be used (-33 is for plug
lines apply to all types and some are applicable for modification number, the description, and the shell shells, -34 is for receptacle shells).
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
DPX2-34A
DPX2-33B
DPXB-33
DPX3-33
DPX4-33
DPX2-34B
DPXB-34
DPX3-34
DPX4-34
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M-34M
DPX2-34B/33B
DPXB-34
DPX3-34
DPX4-34
DPX2-33 and 34
DPX2-33A
DPX2-34A
DPX2-33F and 34F
DPX2-33M and 34M
DPX2-33B and 34B
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
DPXBME-33 and 34
DPX2ME-33 and 34
DPX3ME-33 and 34
DPX4ME-33 and 34
DPX2-33 and 34
DPX2-33A
DPX2-33F and 34F
DPX2-33M and 34M
DPXB-33 and 34
DPX3-33 and 34
DPX4-33 and 34
Standard construction, mounting holes .120 (3.05) dia.
and with tabs for junction shells.
Standard construction - six floating eyelets
and tabs for junction shells,
Standard construction, mounting holes .120 (3.05) dia.
countersunk 82˚ to .230 (5.84) dia. - no tabs.
Standard construction, mounting holes 120 (3.05) dia. - no tabs.
Standard construction and with standard junction shells.
With four #4-40 clinch nuts in mounting holes.
With six #4-40 clinch nuts in mounting holes.
With ten #440 clinch nuts in mounting holes.
Standard construction and with 90˚ junction shells.
Standard construction and with tabs for attaching junction shells.
Standard construction and with tabs for attaching junction shells.
Mounting holes .120 (3.05) dia. countersunk 100˚ to .230(5.84) dia.
- 00**
- 00
- 00
- 00
- 01
- 01
- 01
- 01
- 02
- 02
- 02
- 03
Modification
DESCRIBES STANDARD
CONNECTOR HOUSING
#4-40 CLINCH NUTS
#4-40 THREAD
(2 TABS PER
RETAINING
PLATE)
Applicable for all MA, ME, NA & NE Series Connectors.
Applicable to NE Series also.
MODIFICATION 00
MODIFICATION 01
MODIFICATION 02
ATTACHING TABS
MODIFICATION 03
ALTERNATE STYLE
Applicable Series Definition
1
1
1
1
1
2
1
1
1
MOUNTING HOLES
.120 (3.05) DIA.
C'SUNK 100 TO
.230 (5.84) DIA.
Modifications Codes
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 66
H-67
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Modfication
ALTERNATE STYLE
ALTERNATE STYLE
ALTERNATE STYLE
MODIFICATION 04
MODIFICATION 08
MODIFICATION 12
MODIFICATION 13
MODIFICATION 17
MODIFICATION 18
Applicable Series Definition
MOUNTING HOLES
.120 (3.05) DIA.
C'SUNK 100 TO
.230 (5.84) DIA.
MOUNTING HOLES
.137 (3.48) DIA.
C'SUNK 82 TO
.230 (5.84) DIA.
#4-40 THREAD
MOUNTING
SLOTS (4)
.208 (5.28)
MOUNTING
SLOTS (4)
.237 (6.02)
(SEE PAGE 62 FOR JUNCTION
SHELL CONFIGURATIONS
#4-40 CLINCH NUTS
#4-40 CLINCH NUTS
#4-40 THREAD
#4-40 THREAD
ATTACHING TABS
(2 PER RETAINING
PLATE)
ATTACHING TABS
(2 PER RETAINING
PLATE)
Applicable for all MA, ME, NA & NE Series Connectors.
- 04** DPX2-33B
DPXB-33
DPX3-33
DPX4-33
DPX2-33 and 34
DPX2-33F and 34F
DPX2-34B
DPXB-34
DPX2-34B
DPXB-34
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33
DPX3-34
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-34
DPX4-34
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-34
.120 (3.05) dia. mounting notes countersunk 100˚ to .230 (5.84) dia.
and tabs for attaching junction shells.
Mounting holes .137 (3.48) dia. countersunk 82˚ to .230 (5.84) dia.
With mounting slots .208 (5.28) wide.
With mounting slots .237 (6.02) wide.
With straight junction shelf. (Not available on DPX4)
With four #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells.
With six #4-40 clinch nuts in mounting holes
and tabs far attaching junction shells.
With ten #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells,
With six #4-40 clinch nuts in mounting holes
and tabs for attaching junction shells.
- 08
- 12
- 13
- 14
- 17
- 17
- 17
- 18
ATTACHING TABS
(2 PER RETAINING
PLATE)
1
1
1
1
1
1
1
Modifications Codes
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 67
H-68 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Modfication
MODIFICATION 19
#4-40 CLINCH NUTS
SUPERSEDED BY
01 MOD.
.022 (0.56) MAX. .025 (0.64) MAX.
.037 MAX.
(0.94)
- 34 RECEPT.
.014 (0.36) MAX.
4 PLACES
4 PLACES
.255 (6.48)
DIA. MAX. .255 (6.48)
DIA. MAX.
RIVET
4 REQD. FRONT FACE OF
FLANGE
- 33 PLUG
.037
(0.94)
MAX. .037
(0.94)
MAX.
.019
(0.48)
MIN .015
(0.38)
MIN
MOUNTING
HOLES(4), . 156(3.96)
DIA.
MODIFICATION 20
MODIFICATION 22
MODIFICATION 23
MODIFICATION 25
MODIFICATION 26
Applicable Series Definition
- 19** DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33
DPX3-34 (Same as Code -01)
DPX2-33A
DPX2-34A
DPX2-33 and 34
DPX2-33A
DPX2-33B
DPXB-33
DPX2-33M and 34M
DPX3-33
DPXBME, DPX2ME, DPX3ME,
DPX4ME - 33 only
DPX2-33F and 34F
DPX2-33 and 34
DPX2-33A
DPX2-33B
DPXB-33
DPX2-34B
DPXB-34
DPX3-33 and 34
DPX4-33 and 34
DPX2-33F and 34F
DPX2-34A
DPX2-33B
DPX2-34B
DPXB-34
DPX2-34B
DPXB-34
DPX3-34
DPX2-34A
DPXBME-34P & 33S
DPX2ME-34P & 33S
DPX3ME-34P & 33S
DPX4ME-34P & 33S
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
DPXBME-34P
DPX2ME-34P
DPX3ME-34P
DPX4ME-34P
With six #4-40 clinch nuts in mounting holes.
Do not assign - use -01 code
Standard construction without tabs on insert retaining plate.
With eight #4-40 clinch nuts in mounting holes.
Same as 01. 01 Recommended
With floating eyelets.
With six mounting holes .208 (5.28) dia. (Foating eyelets omitted)
With four mounting holes .157 (3.99)/.155 (3.94) dia. (Clinch nuts omitted)
Mounting holes .120 (3.05) dia. countersunk 82* to .230 (5.84) dia.
and has tabs for attaching junction shells.
With interfacial seal (if pins) without junction shell tabs and military gold
plating on the contact.
Standard except less grommet*
* On the A106S layout the grommet is replaced by the separator.
Standard except less grommet and with tabs for
attaching junction shells.
(-34 pin only)
Standard except less grommet and with floating
bushings. (Slatted shells).
Standard except less grommet and with clinch
nuts in mounting holes.
Standard less grommet and with clinch nuts in mounting holes
and with tabs for attaching junction shells.
**Indicates polarizing position. (See page 72)
- 20
- 22
- 23
- 24
- 25
- 26
- 29
- 29
- 30
- 31
- 33
- 37
Applicable for all MA, ME, NA and NE Series Connectors.
MOUNTING
HOLES(4), . 120 (3.05)
DIA., C'SUNK 82 TO
.230 (5.84) DIA.
1
1
1
1
1
2
2
2
2
2
Modifications Codes
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 68
H-69
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Modfication
MODIFICATION 39
Two Post Type Face View of Engaging End
Three Post Type
DPX2-34A or 34B DPX3-33 DPX4-33
DPXB-33 DPXB-34 DPX2-33A or 33B
DPX2-33F
or 33M DPX2-34F
or 34M
ALTERNATE STYLE
Applicable Series
All DPX series with
LITTLE CAESAR retention
All DPX series with
LITTLE CAESAR retention
All DPX series with
LITTLE CAESAR retention
All DPX series with
LITTLE CAESAR retention
All DPX series with
LITTLE CAESAR retention
All DPX series with
LITTLE CAESAR retention
All DPX as listed for code -22
All DPXB series
All DPX series with
LITTLE CAESAR retention
DPXB-33 & 34
DPX2-33B
DPX2-34B
DPX3-33 & 34
DPX4-33 & 34
- 39**
FLOATING BUSHINGS
#4-40 THREAD
ATT ACHING TABS
(2 PER RETAINING
PLATE)
LEFT POST
COUPLING
MECHANISM
RIGHT POST
BA
BA
POT
A
POTB
TOP
TOP
TOP
TOP
AB
LEFT POST
COUPLING
MECHANISM
RIGHT POST
LEFT POST
CENTER POST
RIGHT POST
LEFT POST
CENTER POST
RIGHT POST
LEFT POST
OR KEY
CENTER POST
OR KEY
RIGHT POST
OR KEY
LEFT POST
CENTER POST
RIGHT POST
LEFT POST
CENTER POST
RIGHT POST
LEFT POST
CENTER POST
RIGHT POST
- 70**
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
Applicable for all MA, ME, NA and NE Series Connectors. Applicable for NE Series Also. **Indicates polarizing position. (See page 72)
The -7*** and 8*** Modification Codes are reserved for connectors which have Low Insertion Force (LIF) Contacts.
The LIF design is not applicable to thermocouple contacts, coaxial contacts and contacts larger than size 8 and Standard size 20
With floating eylets & tabs for attaching junction shells.
Definition
Same as -00 with addition of LIF contacts
See Contact Section Page 54
Same as -31 with addition of LIF contacts
See Contact Section Page 54
Same as -01 with addition of LIF contacts
See Contact Section Page 54
Same as -23 with addition of LIF contacts
See Contact Section Page 54
Same as -33 with addition of LIF contacts
See Contact Section Page 54
Same as -02 with addition of LIF contacts
See Contact Section Page 54
Same as -22 with addition of LIF contacts
Mounting holes .120 (3.05) dia. countersunk 82 to
.230 (5.84) dia. and has LIF contacts.
Same as -29 with addition of LIF contacts
1
21
Modifications Codes
Polarization
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 69
Dark areas represent post
1 2 3 4 5 6
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
4
5
6
2
3
4
5
2
4
4
4
4
4
3
3
3
3
4
2
3
2
3
2
3
2
2
2
1
1
6
1
1
1
1
1
2
2
2
1
6
5
3
2
1
6
3
2
3
3
3
4
4
5
2
1
3
2
3
2
3
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
6
6
6
6
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
4
4
4
4
4
4
3
3
3
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
3
The last two digits in the DPX nomenclature (ex: DPXB-8-33B-0014) refer to the polarizing post position. When the last two digi ts are omitted it means the
polarizing posts will not be assembled and position number is not stamped on the connector. This allows the customer to positio n the posts themselves and then
stamp the appropriate number on the shell. If the last two digits are made 00 it means the polarizing posts are deleted.
Positions
Two Post Type
Position
Position
Left Post
Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post Position Left
Post Center
Post Right
Post
Right Post Position Left Post Right Post Position Left Post Right Post Position Left Post Right Post
Three Post Type DPXB, DPX2 33B, DPX2 34B, DPX3 and DPX4
PLUG SHELL
DPX2 33 PLUG MALE SHELL ONLY
RECEPTACLE SHELL
DPX2 34 RECEPTACLE FEMALE SHELL ONLY
H-70 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Polarization
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 70
H-71
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
Panel Cutouts
DPXA
DPXB
NOTE -
1.781 (45.24)
.125 (3.15)
RAD. TYP.
.750
(19.05)
.120 (3.05) DIA.
4 HOLES
.120 (3.05) DIA.
4 HOLES .120 (3.05) DIA.
4 HOLES
2.062 (52.38)
1.437
(36.50) 1.437
(36.50)
1.720
(43.70)
1.720
(43.70)
.720
(18.29)
.720
(18.29) .580
(14.73) 1.440
(3.66)
.260 (6.60)
1.25
(3.18)
1.78 (4.52)
1.350
(34.30)
.561
(14.25)
.125 R. TYP.
(3.18)
- 33 Front Mount - 33 Rear Mount
- 34 Rear Mount
- 34 Front Mount
1.720
(43.69)
OF
INSERT .718
(18.24) .718
(18.24)
C
L
OF INSERT
C
L
C
L
C
L
1.140
(28.96)
WHEN USING THE -2301 FLOATING EYELET
MODIFICATION, ADD .050 (1.27) TO THE CUTOUT
SIZE TO ALLOW FOR FLOAT (EXCEPTION -34A)
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 71
H-72 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
All tolerances are +_ .015 (0.38) unless otherwise noted.
2.062 (52.38)
.750 TYP.
(19.05)
.469 TYP.
(11.91)
1.031
(26.16)
.120 (3.05) DIA.
8 HOLES
2.800
(71.10)
1.720 (43.70)
1.720 (43.70)
1.391
(35.33) 1.391
(35.33)
1.391
(35.33)
1.391
(35.33)
1.630
(41.40)
1.160
(29.46)
.120 (3.05)
6 HOLES .120 (3.05) DIA.
4 HOLES
.120 (3.05) DIA.
4 HOLES
.120 (3.05) DIA.
6 HOLES
For - 23 float mtg. mod. 1.78 (45.21).
1.890
(48.00) 2.350
(59.69)
.718
(18.24)
.718
(18.24)
.718
(18.24)
.718
(18.24)
2.783
(70.69) 2.783
(70.69)
2.783
(70.69)
1.391
(35.33)
2.783
(70.69)
2.783
(70.69)
1.780
(45.21)
1.780
(45.21)
1.970
(50.04)
2.500
(63.50)
2.500
(63.50)
2.550
(64.77)
.156 R. TYP.
(3.96)
1.830
(46.48)
.156 R. TYP.
(3.96)
.120 (3.05) DIA. 6 HOLES
OMIT CENTER
HOLES FOR - 33B
2.460
(62.50)
.718
(18.24) 1.437
(36.50) 1.437
(36.50)
1.437
(36.50)
1.437
(36.50)
1.437
(36.50)
.125 R. TYP.
(3.18)
.125 R. TYP.
(3.18)
2.062 (52.38)
1.031
(26.16) .120 (3.05) DIA.
8 HOLES
.750 TYP
(19.05)
.469 TYP.
(11.91)
1.630
(41.40)
2.230
(56.60)
2.700
(68.60)
.156 R. TYP.
(3.96)
.750 TYP.
(19.05)
.469 TYP.
(11.91)
1.780
(45.20)
2.840
(72.10)
.120 (3.05) DIA
8 HOLES
1.031
(26.19)
2.062 (52.38)
DPX2
- 33 FRONT MOUNT
- 33A & -33B FRONT MOUNT
- 34A REAR MOUNT
(-34A FRONT MOUNT CONSULT FACTORY) - 33B REAR MOUNT
- 33B REAR MOUNT
- 33A REAR MOUNG - 34B FRONT MOUNT
- 33 REAR MOUNT - 34 FRONT
OR REAR MOUNT
C
L
C
L
C
L
C
L
C
L
C
L C
L
C
L
C
L
C
L
C
L
C
L C
L
C
L
C
L
1.160
(29.50)
1.260
(32.00)
1
1
Panel Cutouts
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 72
H-73
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX
All tolerances are +_ .015 (0.38) unless otherwise noted.
.120 (3.05) DIA.
6 HOLES
.120 (3.05) DIA.
6 HOLES
1.780
(45.21)
3.640 (92.46)
3.120 (79.25)
2.500
(63.50)
2.500
(63.50) 1.980
(50.29)
1.648
(41.86)
1.648
(41.86)
.930 (23.62)
.120 (3.05) DIA.
2.783
(70.69)
2.783
(70.69)
1.391
(32.33)
3.770 (95.76)
.125 R. TYP.
(3.18)
.930 (23.62)
1.391
(35.33)
10 HOLES
.120 (3.05) DIA.
10 HOLES
1.780
(45.21)
1.437
(36.50)
1.437
(36.50)
.718 (18.24)
.718 (18.24)
.125 R. TYP.
(3.18)
3.740
(95.00)
3.740
(95.00)
2.013
(51.13)
2.013
(51.13)
4.026
(102.26)
4.026
(102.26)
1.260
(30.00)
3.220
(81.79)
DPX3
DPX4
FRONT MOUNT REAR MOUNT
FRONT MOUNT REAR MOUNT
C
L
C
L
C
L
C
L
C
L
Panel Cutouts
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 73
H-74 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Crimp
Material: Teflon
(All others thermoplastic) Part
Number
A
A A
A
C
C C
C
B
B B
B
225-1013-000
225-0070-000
225-0071-000
225-0072-000
225-0090-000
22
20
16
12
#5 and #9 Coax
Black
Red
Blue
Yellow
White
.063 (1.6)
.085 (2.2)
.115 (2.9)
.171 (4.3)
.365 (9.3)
Contact
Size Color A B C
Part
Number
225-0094-000
225-0095-000
225-0096-000
225-0097-000
225-0098-000
225-0099-000
#5 Coax
(Pin)
#5 and #9 Coax
(Socket)
White
White
.275 (7.0)
.275 (7.0)
.251 (6.4)
.251 (6.4)
.450 (11.4)
1.061 (26.9)
22
20
16
12
Black
Red
Blue
Yellow
.069 (1.7)
.083 (2.1)
.131 (3.3)
.187 (4.7)
.051 (1.3)
.069 (1.7)
.108 (2.7)
.156 (4.0)
.420 (10.7)
.350 (8.9)
.320 (8.1)
.320 (8.1)
Contact
Size Color A B C
Material: Teflon
(All others thermoplastic)
.040 (1.0)
.053 (1.3)
.074 (1.88)
.120 (3.0)
.287 (7.3)
.469 (11.9)
.805 / .755 (20.5 / 19.2)
1.472 / 1.422 (37.4 / 36.1)
1.441 / 1.391 (36.6 / 35.5)
.835 (21.2)
Sealing Plugs - DPX*ME (for environmental requirements)
H
Rack and Panel
Filler Plugs - DPX*
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 74
H-75
www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Accessories
(DPXA ONLY)
DIECAST STRAIGHT JUNCTION SHELL
Style
(Right) DPXA
(Left) DPXA
(Right) DPX2
(Left) DPX2
1.281
(32.54)
1.781
(45.24)
1.375
(34.93)
.781
(19.84)
1.156
(29.36)
CABLE
ENTRY 2.312
(58.72)
2.312
(58.72)
1.156 (29.36)
1.062 (26.98)
.837 (21.26)
CABLE ENTRY
1.938 APPROX.
(49.23) 1.282
(32.56)
1.782 (45.26) 1.157 (29.39)
2.500
(63.50)
2.468 (62.69)
1.906 (48.41)
CABLE ENTRY
.932
(23.67) 1.406
(35.71)
1.281
(32.54)
CLINCH
NUTS
.406 APPROX.
(10.31)
.484 (12.29) 1.281 (32.54)
1.156
(29.36)
1.875 + _ .031
(47.63 + _ 0.79)
2.406 (61.11)
1.843 (46.81)
.937
(23.80)
1.906
(48.41)
1.906
(48.41)
CABLE ENTRY
3.406 (86.51)
2.843 (72.21) .812
(20.62)
.125 R. TYP.
(3.18)
.187 R. TYP.
(4.75)
1.281 (32.54)
1.406 (35.71)
.125 R. TYP.
(3.18)
.187 R. TYP.
(4.75)
1.281
(32.54)
1.406 (35.71)
2.437
(61.90)
APPROX.
Part Number
20745-22
20745-23
20745-10
20745-11
Style
DPX2
Part Number
20745-12
Style
DPXA
DPX2
* DPX2 Junction Shells are also used on DPXB connectors.
Diecast junction shells may be used on DPXA connectors. They have 4-40 NC-2B tapped mounting holes for
attaching to the shell mounting hardware.
Conductive (black)
DPXB-60-1 for 34 Shell
Conductive Dust Caps
025-0767-001
Protect Against
Static Electricity
Conductive (black)
DPXA-59-1 for 33 Shells
025-0749-001
33 34
Part Number
20745-21
20745-8
Style
DPXA
Part Number
22017
Style
DPXA
Part Number
22017-2
Style
DPXA
Part Number
22017-1
(DPXA ONLY)
DIECAST STRAIGHT JUNCTION SHELL
STRAIGHT JUNCTION SHELL
90 Angle
90 ANGLE DPX2
JUNCTION SHELL (SIDE OUTLET)
(DPXA ONLY)
DIECAST 90 ANGLE JUNCTION SHELL
Junction Shells
Dust Caps
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 75
H-76 www.ittcannon.com
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
ARINC 404
DPX Accessories
For BKA* DPX Series (Crimp, & Solder)
Refernece MIL-C-17D & DPX NE/NA MIL-C-81659 Series
RG/U
Type
7
9
55
58
59
59B
62
62A
71
115
142
142B
174
178
179
179B
180
180B
187
188
195
196
214
223
225
316
393
400
402
Inner
Conductor
0.0359 "
0.0855"
0.0320 "
0.0320"BC
0.0253 "
0.0230"
0.0253"
0.0253"
0.0253"
0.0840"
0.0359"
0.0390"
0.0189"
0.0120"
0.0120 "
0.0120"
0.0120"
0.0120"
0.0120"
0.0201"
0.0120"
0.0120'
0.0888"
0.035 "
0.0936"
0.0201
0.0936"
0.0385"
0.0360"
Dielectric
Material
Air-space
PE
PE
PE
PE
PE
PE
Air-space
PE
Air-space
PE
Air-space
PE
PTFE
PTFE
PTFE
PE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PTFE
PE
pE
PTFE
PTFE
PTFE
PTFE
PTFE
DOD
(Inch)
0.250
0.280
0.116
0.116
0.146
0.146
0.146
0.146
0.146
0.250
0.116
0.116
0.060
0.036
0,057
0.063
0.103
0.102
0.060
0.060
0.102
0.034
0.285
0.116
0.285
0.060
0.285
0.116
0.119
O.D
(Inch)
0.370
0.420
0.206
Max.
0.195
0.242
0.242
0,242
0.242
0.250
Max.
0.375
0.206
Max.
0.195
0.100
0.079
Max.
0.094
Max.
0.100
0.141
Max.
0.145
Max.
0.110
Max .
0.110
Max.
0.155
Max.
0.080
Max.
0.425
0.216
Max.
0.430
0.102
0.390
0.195
0.141
Weight
(lbs/ft)
0.080
0.140
0.032
0.029
0.032
0.032
0.038
0.038
0.046
0.148
0.047
0.050
0.008
0.0054
0.010
0.010
0.019
0.019
0.010
0.011
0.020
0.006
0.126
0.034
0.180
0.012
0.165
0,050
0.032
Max Oper.
Temp, Range
( C)
-40 + 80
-40 + 80
-55 + 80
-40 + 80
-40 + 80
-40 + 80
-40 + 80
-40 + 80
-40 + 80
-55 + 250
-55 + 250
-55 + 200
-40 + 80
-40 + 150
-55 + 150
-55 + 200
-40 + 150
-55 + 200
-55 + 250
-55 + 250
-55 + 250
-55 + 250
-40 + 80
-40 + 80
-55 + 250
-55 + 200
-55 + 200
-55 + 200
-55 + 200
Max Oper.
Voltage
(Volts
RMS)
1,000
4,000
1,900
1,900
2,300
2,300
750
750
750
5,000
1,900
1,900
1,500
1,000
1,200
1,200
1,500
1,500
1,200
1,200
1,500
1,000
5,000
1,900
5,000
1,200
5,000
1,900
2.500
Suggested
Alt Cable
Use RG63B
Use RG214
Use RG55B
Use RG58B
Use RG59B
Use up to
1000 MHz
Use RG62A
Use RG71B
Use RG115A
Use RG142A
Use RG178B
Use RG1798
Use RG180B
Use RG179B
Use RG316
Use RG180B
Use RG178B
Use RG188A
Use RG225
Use RG142B
Code
Crimp
Type
Coax
S
D,P,G
JAC,AD
A,F,T
A,F,T
V
S,AE
D,H,U,
AF
ER,K,AG,
L,M,AF
D,H,U,
AF
CAB
AB
D,H,U,
AF
D,A,U
AF
CAB
E,R,K.
L,AA,AG
Code
Solder
Type
Coax
l
R,AC
C, J
C, J, Z
AB
D
E
E
B
A,K
A,K
B
AA
R,AC
C,J
DPX
NE/NA
Military
Size 5/9
Seal 1
Size 5/9
Seal 1
Size 5/9
Seal 2
Size 5/9
Seal 1
Size 5/9
Seal 1
Seal 2
Size 5/9
Seal 1
Size 5/9
Seal 1
Size 5/9
Seal 2
Size 5/9
Seal 2
BKA*
ARINC
Type Coax
Size 1(71W1)
Size 1(71W1)
Size 1(71W1)
Size 5
Size 1(71W1)
Size 1(71W1)
Size 1(71W1A)
Size 1(71W1A)
Size 5
Size 5
Size 12
Size 5
Size 5
Size 5
Size 5
Size 5
Size 5
Size 5
Size 5
Size 1(71W1)
Size 1(71W1A)
Size 1(71W1)
Size 1(71W1A)
Size 1(71W1)
Size 1(71W1)
Size 1(71W1A)
Jacket
Material
PVC
PVC
PE
PVC
PVC
PVC
PVC
PVC
PVC
FG Braid
FG Braid
FEP
PVC
KEL-F
KEL-F
FEP
KEL-F
FEP
PTFE
PTFE
PTFE
PTFE
PVC
PVC
FG Braid
FEP
FEP
FEP
None
NOTE: This table is shown for reference only. ITT Cannon recommends that the above information be used as a guideline and may be subject to variation between
various cable manufacturers. For specific information concerning the actual physical characteristics of a specific cable, contact the manufacturer.
Coaxial Cable Reference Guide
H
Rack and Panel
ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 76
