Ordering information DC-DC Converters PCB Mount Type MGW1R5 MG 1 W 2 1R5 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional R MODEL MGW1R50512 MGW1R50515 MGW1R51212 MGW1R51215 MGW1R52412 MGW1R52415 MGW1R54812 MGW1R54815 MAX OUTPUT WATTAGE[W] 1.56 1.50 1.56 1.50 1.56 1.50 1.56 1.50 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05 VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT MODEL MGW1R50512 MGW1R50515 MGW1R51212 MGW1R51215 MGW1R52412 MGW1R52415 MGW1R54812 MGW1R54815 VOLTAGE[V] DC4.5 - 9 DC9 - 18 (Surge voltage 12.5V, 100ms max) (Surge voltage 25V, 100ms max) DC36 - 76 (Surge voltage 100V, 100ms max) CURRENT[A] *2 0.38typ 0.38typ 0.16typ 0.16typ 0.080typ 0.079typ 0.041typ 0.040typ EFFICIENCY[%] *2 83typ 81typ 83typ 81typ 82typ 80typ 81typ 80typ VOLTAGE[V] 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 CURRENT[A] 0.065 0.05 0.065 0.05 0.065 0.05 0.065 0.05 LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max *3 480max 600max 480max 600max 480max 600max 480max 600max LOAD REGULATION[mV] OUTPUT DC18 - 36 (Surge voltage 50V, 100ms max) *4 600max 750max 600max 750max 600max 750max 600max 750max RIPPLE[mVp-p] *5 150max 150max 150max 150max 150max 150max 150max 150max RIPPLE NOISE[mVp-p] *5 200max 200max 200max 200max 200max 200max 200max 200max -20 to +85C 210max 260max 210max 260max 210max 260max 210max 260max -40 to +85C 320max 390max 320max 390max 320max 390max 320max 390max 60max 48max 60max 48max 60max 48max 60max TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. (20MHz Osilloscope) *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-14 MGW1R5 External view Recommended Pad and Hole dia. Model TOP VIEW 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model Vin Vin 2.2 [0.09] 12.7 [0.5] Vout COM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 2.8 [0.11] Unit : 0.1inch Dimension : mm Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-15 Ordering information DC-DC Converters PCB Mount Type MGW3 MG 1 W 2 3 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional R MODEL MGW30512 MGW30515 MGW31212 MGW31215 MGW32412 MGW32415 MGW34812 MGW34815 MAX OUTPUT WATTAGE[W] 3.12 3.00 3.12 3.00 3.12 3.00 3.12 3.00 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 0.13 0.1 0.13 0.1 0.13 0.1 0.13 0.1 MODEL MGW30512 MGW30515 MGW31212 MGW31215 MGW32412 MGW32415 MGW34812 MGW34815 VOLTAGE[V] DC4.5 - 9 DC9 - 18 (Surge voltage 12.5V, 100ms max) (Surge voltage 25V, 100ms max) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT DC36 - 76 (Surge voltage 100V, 100ms max) CURRENT[A] *2 0.76typ 0.74typ 0.31typ 0.31typ 0.16typ 0.16typ 0.080typ 0.077typ EFFICIENCY[%] *2 83typ 82typ 84typ 83typ 83typ 83typ 82typ 82typ VOLTAGE[V] 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 CURRENT[A] 0.13 0.1 0.13 0.1 0.13 0.1 0.13 0.1 LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max *3 480max 600max 480max 600max 480max 600max 480max 600max LOAD REGULATION[mV] OUTPUT DC18 - 36 (Surge voltage 50V, 100ms max) *4 600max 750max 600max 750max 600max 750max 600max 750max RIPPLE[mVp-p] *5 150max 150max 150max 150max 150max 150max 150max 150max RIPPLE NOISE[mVp-p] *5 200max 200max 200max 200max 200max 200max 200max 200max -20 to +70C 180max 220max 180max 220max 180max 220max 180max 220max -40 to +70C 290max 340max 290max 340max 290max 340max 290max 340max 60max 48max 60max 48max 60max 48max 60max TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. (20MHz Osilloscope) *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-16 MGW3 External view Recommended Pad and Hole dia. Model TOP VIEW 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model Vin Vin 2.2 [0.09] 12.7 [0.5] Vout COM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 2.8 [0.11] Unit : 0.1inch Dimension : mm Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-17 Ordering information DC-DC Converters PCB Mount Type MGW6 MG 1 W 2 6 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MGW60512 MGW60515 MGW61212 MGW61215 MGW62412 MGW62415 MGW64812 MGW64815 MAX OUTPUT WATTAGE[W] 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2 MODEL MGW60512 MGW60515 MGW61212 MGW61215 MGW62412 MGW62415 MGW64812 MGW64815 VOLTAGE[V] DC4.5 - 9 DC9 - 18 (Surge voltage 12.5V, 100ms max) (Surge voltage 25V, 100ms max) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT DC36 - 76 (Surge voltage 100V, 100ms max) CURRENT[A] *2 1.38typ 1.38typ 0.57typ 0.57typ 0.29typ 0.29typ 0.15typ 0.15typ EFFICIENCY[%] *2 87typ 87typ 88typ 88typ 88typ 88typ 88typ 88typ VOLTAGE[V] 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 CURRENT[A] 0.25 0.2 0.25 0.2 0.25 0.2 0.25 0.2 LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max *3 480max 600max 480max 600max 480max 600max 480max 600max *4 LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT DC18 - 36 (Surge voltage 50V, 100ms max) *5 RIPPLE NOISE[mVp-p] *5 TEMPERATURE REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max Po=30% to 120max 120max 120max 120max 120max 120max 120max 120max Po=0 to 30% 480max 480max 360max 360max 360max 360max 360max 360max Po=30% to 200max 200max 200max 200max 200max 200max 200max 200max Po=0 to 30% 600max 600max 500max 500max 500max 500max 500max 500max -20 to +70C 180max 220max 180max 220max 180max 220max 180max 220max -40 to +70C 290max 340max 290max 340max 290max 340max 290max 340max 60max 48max 60max 48max 60max 48max 60max DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS Works over 105% of rating and recovers automatically ISOLATION DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) INPUT-OUTPUT Provided (Negative logic L : ON, H : OFF) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm [0.87X0.48X0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. (20MHz Osilloscope). Po:Output wattage. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-18 MGW6 External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] 0.5 [0.02] MG-19 Ordering information DC-DC Converters PCB Mount Type MGW10 MG 1 W 2 10 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MGW100512 MGW100515 MGW101212 MGW101215 MGW102412 MGW102415 MGW104812 MGW104815 MAX OUTPUT WATTAGE[W] 10.08 10.20 10.08 10.20 10.08 10.20 10.08 10.20 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 0.42 0.34 0.42 0.34 0.42 0.34 0.42 0.34 VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT MODEL MGW100512 MGW100515 MGW101212 MGW101215 MGW102412 MGW102415 MGW104812 MGW104815 VOLTAGE[V] DC4.5 - 9 DC9 - 18 (Surge voltage 12.5V, 100ms max) (Surge voltage 25V, 100ms max) DC36 - 76 (Surge voltage 100V, 100ms max) CURRENT[A] *2 2.38typ 2.40typ 0.97typ 0.97typ 0.49typ 0.49typ 0.24typ 0.25typ EFFICIENCY[%] *2 85typ 85typ 87typ 88typ 87typ 88typ 88typ 88typ VOLTAGE[V] 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 CURRENT[A] 0.42 0.34 0.42 0.34 0.42 0.34 0.42 0.34 LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max 60max 75max *3 480max 600max 480max 600max 480max 600max 480max 600max *4 LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT DC18 - 36 (Surge voltage 50V, 100ms max) *5 RIPPLE NOISE[mVp-p] *5 TEMPERATURE REGULATION[mV] 600max 750max 600max 750max 600max 750max 600max 750max Po=30% to 120max 120max 120max 120max 120max 120max 120max 120max Po=0 to 30% 480max 480max 360max 360max 360max 360max 360max 360max Po=30% to 200max 200max 200max 200max 200max 200max 200max 200max Po=0 to 30% 600max 600max 500max 500max 500max 500max 500max 500max -20 to +50C 150max 180max 150max 180max 150max 180max 150max 180max -40 to +50C 240max 290max 240max 290max 240max 290max 240max 290max 60max 48max 60max 48max 60max 48max 60max DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS Works over 105% of rating and recovers automatically ISOLATION DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) INPUT-OUTPUT Provided (Negative logic L : ON, H : OFF) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm [0.87X0.48X0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. (20MHz Osilloscope). Po:Output wattage. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-20 MGW10 External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] 0.5 [0.02] MG-21 Ordering information DC-DC Converters PCB Mount Type MGW15 MG 1 W 2 15 24 3 05 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MGW151205 MGW151212 MGW151215 MGW152405 MGW152412 MGW152415 MGW154805 MGW154812 MGW154815 MAX OUTPUT WATTAGE[W] 15 15.6 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 1.5 0.65 0.65 0.65 VOLTAGE[V] DC OUTPUT *1 CURRENT[A] 15 0.5 15 1.5 15.6 15 0.5 15 1.5 15.6 15 0.5 SPECIFICATIONS INPUT MODEL MGW151205 MGW151212 MGW151215 MGW152405 MGW152412 MGW152415 MGW154805 MGW154812 MGW154815 VOLTAGE[V] DC9 - 18 1.48typ 1.49typ 1.42typ 0.74typ 0.74typ 0.70typ 0.37typ 0.37typ EFFICIENCY[%] *2 84typ 87typ 88typ 84typ 88typ 89typ 84typ 89typ 89typ VOLTAGE[V] 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) CURRENT[A] 1.5 0.65 0.5 1.5 0.65 0.5 1.5 0.65 0.5 LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max 40max 60max 75max RIPPLE[mVp-p] *6 RIPPLE NOISE[mVp-p] *6 TEMPERATURE REGULATION[mV] 0.35typ *3 500max *5 600max 750max 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max 250max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max 120max 120max 120max -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max 150max -20 to +60C 50max 150max 180max 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 80max 240max 290max 50max 60max 50max 50max 60max 50max 50max 60max DRIFT[mV] *7 START-UP TIME[ms] 50max 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V]*8 4.935 - 5.240 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS ISOLATION DC36 - 76 *2 LOAD REGULATION[mV] OUTPUT DC18 - 36 CURRENT[A] 11.765 - 12.492 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 Works over 105% of rating and recovers automatically Provided (Negative logic L:ON, H:OFF) INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1Single output +10V, +24V, +30V with no use of COM. *2Rated input 12V, 24V or 48V lo=100% *3 An output load is 100%, the other load is 5% to 100%. *4 An output load is 100%, the other load is 20% to 100%. *5 Refer to the instruction manual 11. *6Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) *7Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. MG-22 *8Rated input voltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. MGW15 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm 10.16 [0.4] +Vout 2.54 [0.1] 25.4 [1.0] COM -Vin 10.16 [0.4] 7.62 [0.3] 5.08 [0.2] +Vin RC -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 20g max 20.32 [0.8] 25.4 [1.0] MG-23 Ordering information DC-DC Converters PCB Mount Type MGW30 MG 1 W 2 30 24 3 05 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MGW301205 MGW301212 MGW301215 MGW302405 MGW302412 MGW302415 MGW304805 MGW304812 MGW304815 MAX OUTPUT WATTAGE[W] 25 30 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 2.5 1.25 1.25 1.25 VOLTAGE[V] DC OUTPUT *1 CURRENT[A] 30 1 25 2.5 30 30 1 25 2.5 30 30 1 SPECIFICATIONS INPUT MODEL MGW301205 MGW301212 MGW301215 MGW302405 MGW302412 MGW302415 MGW304805 MGW304812 MGW304815 VOLTAGE[V] DC9 - 18 DC36 - 76 *2 2.42typ 2.78typ 2.78typ 1.20typ 1.38typ 1.38typ 0.60typ 0.70typ EFFICIENCY[%] *2 86typ 90typ 90typ 87typ 91typ 91typ 87typ 90typ 90typ VOLTAGE[V] 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) CURRENT[A] 2.5 1.25 1 2.5 1.25 1 2.5 1.25 1 LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max 40max 60max 75max *3 500max *5 600max 750max 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max 250max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max 120max 120max 120max -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max 150max -20 to +60C 50max 150max 180max 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 80max 240max 290max 50max 60max 50max 50max 60max 50max 50max 60max LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT DC18 - 36 CURRENT[A] *6 RIPPLE NOISE[mVp-p] *6 TEMPERATURE REGULATION[mV] DRIFT[mV] *7 START-UP TIME[ms] 50max 0.70typ 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V]*8 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works over 120 to 160% of rating (Total of +V and -V) OTHERS REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1Single output +10V, +24V, +30V with no use of COM. *2Rated input 12V, 24V or 48V DC lo=100% *3 Symmetrical loading from 5% to 100%. *4 Symmetrical loading from 20% to 100%. *5 Refer to the instruction manual 11. *6Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) MG-24 *7Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *8Rated input voltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. MGW30 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm +Vout 10.16 [0.4] 5.08 [0.2] +Vin -Vin 25.4 [1.0] 10.16 [0.4] 10.16 [0.4] COM RC 5.08 [0.2] -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 40g max 45.72 [1.8] 50.8 [2.0] MG-25