MC118 (1/08) MIL-STD-1553 TRANSFORMERS USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com MC118 (1/08) MIL-STD-1553 TRANSFORMERS TABLE of CONTENTS QPL MIL-STD-1553 Interface Transformers Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Single Ratio Transformers - Through Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Dual Ratio Transformers - Through Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7 Dual Ratio Transformers - Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 non-QPL MIL-STD-1553 Interface Transformers Overview Dual Ratio Transformers - Single Interface, Through Hole, Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Dual Ratio Transformers - Single Interface, Surface Mount, Low Profile, Flat Pack and Gull Wing . . . . . . . . .13 Dual Ratio Transformers - Dual Interface, Through Hole, Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Dual Ratio Transformers - Dual Interface, Surface Mount, Low Profile, Flat Pack and Gull Wing . . . . . . . . . .15 Dual Ratio Transformers - Dual Interface, Through Hole, Stacked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Dual Ratio Transformers - Dual Interface, Surface Mount, Stacked, Flat Pack and Gull Wing . . . . . . . . . . . .17 Dual Ratio Transformers - Single Interface, Surface Mount, Hermatically-sealed, Flat Pack . . . . . . . . . . . . .18 Dual Ratio Transformers - Single Interface, Through Hole, Standard Profile Value Series (COTS) . . . . . . . .19 Dual Ratio Transformers - Single Interface, Through Hole and Surface Mount, Stacked, Low Profile . . . .20-21 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 1 MC118 (1/08) MIL-STD-1553 TRANSFORMERS QPL Interface Transformers Overview QPL MIL-STD-1553 Interface Transformers As "Technitrol Components Division," we were the first to achieve QPL status for MIL-STD-1553B interface transformers, also known as low-power pulse transformers. Today, as "Pulse Military Aerospace Division," our QPL transformer line includes a wide selection of products for each of the product levels called for by MIL-PRF-21038/27, formerly MIL-T-21038/27. difficulty producing components that can survive the high-heat rigors of surface mounting and the performance, reliabliability, part-to-part repeatibility, and lifespan required by high-rel military and commercial applications. The first several pages of this catalog cover all of our QPL transformer products. Each part has a military designation number (found on DESC/DSCC approved drawings) as well as our own product number. These part numbers are listed in the specification tables. We also were the first to achieve QPL status on surfacemount MIL-STD-1553 pulse transformers -- more than 20 years ago. To this day, many manufacturers have Level C parts are tested to our internal specifications. Group A or B testing is not performed on Level C parts. Level M parts is exactly the same as the original QPL product that was defined by the earlier MIL-T-21038/27 specification. Level T part receives the most extensive testing along with thermal cycling. For information about testing to selected levels, see next page. MIL-PRF-21038E (8 July 1998) supersedes MIL-T-21038D (11 May 1979) and establishes three product levels for low power pulse transformers. The new specification allows designers to select a QPL device and limit the testing to what is needed for the application: Level C - for high reliability commercial/industrial applications; Level M - for general purpose military applications; Level T - for high reliability critical military applications. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 2 MC118 (1/08) MIL-STD-1553 TRANSFORMERS QPL Interface Transformers Overview MIL-PRF-21038/27 Inspection, Sampling, Testing Table 1 -- Group A Inspection Level "C"** Level "M" Level "T" Tests Sampling Plan Tests Sampling Plan Tests Sampling Plan N/A N/A Electrical Characteristics per MIL-PRF-21038/27 Sample per Table 3 Thermal Shock 100% N/A N/A Visual and Mechanical Inspection Sample per Table 3 Winding Continuity 100% N/A N/A N/A N/A Electrical Characteristics per MIL-PRF-21038/27 100% N/A N/A N/A N/A Impedance Sample per Table 3 N/A N/A N/A N/A Visual and Mechanical Inspection Sample per Table 3 Table 2 -- Group B Inspection Level "C"** Level "M" Level "T" Tests Sampling Plan Tests Sampling Plan Tests Sampling Plan N/A N/A Dielectric Withstanding Voltage Sample per Table 3 Dielectric Withstanding Voltage Sample per Table 3 N/A N/A Insulation Resistance Sample per Table 3 Insulation Resistance Sample per Table 3 Table 3 -- Sampling Plans for Group A and Group B Inspections Lot Size Group A, Group II Inspections Group B 1 to 5 All All 6 to 13 All 5 14 to 50 13 5 51 to 90 13 7 91 to 150 13 11 151 to 280 20 13 281 to 500 29 16 501 to 1200 34 19 1,201 to 3,200 42 23 3,201 to 10,000 50 29 **NOTE: Parts ordered to Level C are certified to comply with MIL-PRF-21038 Level C, however testing is performed per manufacturer's internal requirements and sampling rates. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 3 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Single Ratio THT QPL Pulse Transformers Qualified for use in QPL MIL-STD-1553 applications Single ratio packages (see Schematics) Designed, built, and tested to MIL-PRF-21038 Levels* C, M, and T Package C is 4-lead; package D is 6-lead (center tap) Built in ISO 9001 facility Applicable specifications MIL-STD-1553B MIL-STD-202 Summary Performance Specifications Impedance (see table below) MIL-PRF-21038 Droop 20% ISO 9001 Overshoot 1V MAX * Level C - for high reliability commercial/industrial applications Common Mode Rejection (CMR) 45dB Frequency Range (no load) 75kHz to 1MHz Level M - for general purpose military applications Operating Temperature Range -55C to 130C Level T - for high reliability critical military applications 5 grams Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage 10K M @ 250Vdc 100Vrms Characteristics Military Pulse Package Designation No. Part No. 1 C M21038/27-05C QC1553-20 2 M M21038/27-05 Q1553-20 C 3 T M21038/27-05T QT1553-20 4 C M21038/27-06C QC1553-21 5 M M21038/27-06 Q1553-21 D 6 T M21038/27-06T QT1553-21 7 C M21038/27-07C QC1553-22 8 M M21038/27-07 Q1553-22 D 9 T M21038/27-07T QT1553-22 10 C M21038/27-08C QC1553-23 11 M M21038/27-08 Q1553-23 D 12 T M21038/27-08T QT1553-23 13 C M21038/27-09C QC1553-24 14 M M21038/27-09 Q1553-24 D 15 T M21038/27-09T QT1553-24 16 C M21038/27-28C QC1553-25* 17 M M21038/27-28 Q1553-25* D 18 T M21038/27-28T QT1553-25* 19 C M21038/27-29C QC1553-51* 20 M M21038/27-29 Q1553-51* D 21 T M21038/27-29T QT1553-51* 22 C M21038/27-30C QC1553-52* 23 M M21038/27-30 Q1553-52* D 24 T M21038/27-30T QT1553-52* *NOTE: Designed for transceivers utilizing a single supply voltage (+5V). Line Level Height (in. MAX) Terminals Ratio (3%) RDC MAX) ( Impedance MIN) ( .250 1-2:4-3 1:1.41 1-2 2.2 4-3 2.7 (4-3) 3,000 .250 1-5:6.2 1CT:1CT 1-5 2.5 6-2 2.8 (6-2) 3,000 .250 1-5:6.2 1CT:1.41CT 1-5 2.2 6-2 2.7 (6-2) 3,000 .250 1-5:6.2 1CT:1.66CT 1-5 1.5 6-2 2.4 (6-2) 3,000 .250 1-5:6.2 1CT:2CT 1-5 1.3 6-2 2.6 (6-2) 3,000 .250 1-5:6.2 1CT:1.5CT 1-3 0.90 6-2 2.5 (6-2) 3,000 .250 1-5:6.2 1CT:1.79CT 1-5 0.90 6-2 2.5 (6-2) 3,000 .250 1-5:6.2 1CT:2.5CT 1-5 1.0 6-2 2.8 (6-2) 3,000 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 4 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Single Ratio THT QPL Pulse Transformers Package C .500 MAX 12,70 4 2 3 1 2 4 1 3 .08 2,03 .350 8,89 MAX .250 6,35 MAX .375 9,53 MIN .34 8,64 .020 .002 O 0,51 0,05 .200 5,08 .400 10,16 Package D .500 MAX 12,70 5 6 3 4 1 2 5 3 1 6 4 2 .08 2,03 .100 2,54 .350 8,89 MAX .250 6,35 MAX .375 9,53 MIN .34 8,64 .200 5,08 .400 10,16 .020 .002 O 0,51 0,05 Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.010, .xxx = +.008 3. All specifications and dimensions are subject to change without notice. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 5 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Dual Ratio THT QPL Pulse Transformers Qualified for use in QPL MIL-STD-1553 applications Dual ratio in a single package (see Schematic) Designed, built, and tested to MIL-PRF-21038 Levels* C, M, and T Two packages available: Package A without standoffs, and Package G with standoffs Built in ISO 9001 facility Applicable specifications MIL-STD-1553B MIL-STD-202 Summary Performance Specifications Impedance (see next page) MIL-PRF-21038 Droop 20% ISO 9001 Overshoot 1V MAX * Level C - for high reliability commercial/industrial applications Common Mode Rejection (CMR) 45dB Frequency Range (no load) 75kHz to 1MHz Level M - for general purpose military applications Operating Temperature Range -55C to 130C Level T - for high reliability critical military applications 5 grams Weight Insualtion Resistance (MIN) 10K M @ 250Vdc Dielectric Withstanding Voltage 100Vrms Package A Package G .625 MAX 15,86 8 7 6 5 4 3 2 1 3 .625 MAX 15,86 8 7 6 5 4 2 1 .625 15,86 MAX .375 9,53 MIN .100 2,54 .200 5,08 2 1 .250 6,35 MAX 3 8 7 6 5 4 3 8 7 6 5 4 2 1 .250 6,35 MAX .020 0,51 .375 9,53 MIN .020 .002 O 0,51 0,05 .100 2,54 .500 12,70 .625 15,86 MAX .200 5,08 .020 .002 O 0,51 0,05 .500 12,70 Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 6 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Dual Ratio THT QPL Pulse Transformers Characteristics Line Level Military Designation No. Pulse Part No. 1 C M21038/27-01C QC1553-1 2 M M21038/27-01 Q1553-1 3 T M21038/27-01T QT1553-1 4 C M21038/27-02C QC1553-2 5 M M21038/27-02 Q1553-2 6 T M21038/27-02T QT1553-2 7 C M21038/27-03C QC1553-3 8 M M21038/27-03 Q1553-3 9 T M21038/27-03T QT1553-3 10 C M21038/27-10C QC1553-5* 11 M M21038/27-10 Q1553-5* 12 T M21038/27-10T QT1553-5* 13 C M21038/27-21C QC1553-81 14 M M21038/27-21 Q1553-81 15 T M21038/27-21T QT1553-81 16 C M21038/27-22C QC1553-82 17 M M21038/27-22 Q1553-82 18 T M21038/27-22T QT1553-82 19 C M21038/27-23C QC1553-83 20 M M21038/27-23 Q1553-83 21 T M21038/27-23T QT1553-83 22 C M21038/27-24C QC1553-84* 23 M M21038/27-24 Q1553-84* 24 T M21038/27-24T QT1553-84* 25 C M21038/27-25C QC1553-85* 26 M M21038/27-25 Q1553-85* 27 T M21038/27-25T QT1553-85* 28 C M21038/27-26C QC1553-45* 29 M M21038/27-26 Q1553-45* 30 T M21038/27-26T QT1553-45* Package Height (in. MAX) A .250 A .250 A .250 A .250 G .275 G .275 G .275 G .275 G .275 A .250 Terminals Ratio (3%) RDC MAX) ( Impedance MIN) ( 1-3:4-8 1CT:1CT 1-3 3.0 (1-3) 1-3:5-7 1CT:.707CT 4-8 3.0 4,000 1-3:4-8 1.4CT:1CT 1-3 3.5 (1-3) 1-3:5-7 2CT:1CT 4-8 3.0 7,200 1-3:4-8 1.25CT:1CT 1-3 3.2 (1-3) 1-3:5-7 1.66CT:1CT 4-8 3.0 4,000 1-3:4-8 1CT:2.12CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.5CT 4-8 3.5 4,000 1-3:4-8 1CT:1CT 1-3 3.0 (1-3) 1-3:5-7 1CT:.707CT 4-8 3.0 4,000 1-3:4-8 1.4CT:1CT 1-3 3.5 (1-3) 1-3:5-7 2CT:1CT 4-8 3.0 7,200 1-3:4-8 1.25CT:1CT 1-3 3.2 (1-3) 1-3:5-7 1.66CT:1CT 4-8 3.0 4,000 1-3:4-8 1CT:2.12CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.5CT 4-8 3.5 4,000 1-3:4-8 1CT:2.50CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.79CT 4-8 3.5 4,000 1-3:4-8 1CT:2.50CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.79CT 4-8 3.5 4,000 *NOTE: Designed for transceivers utilizing a single supply voltage (+5V). USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 7 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Dual Ratio SMT QPL Pulse Transformers Qualified for use in QPL MIL-STD-1553 applications Dual ratio in a single package (see Schematic) Designed, built, and tested to MIL-PRF-21038 Levels* C, M, and T Two packages available: Package B has gull-wing leads, and Package F is flat pack Built in ISO 9001 facility Applicable specifications MIL-STD-1553B Summary Performance Specifications MIL-STD-202 Impedance (see next page) MIL-PRF-21038 Droop 20% ISO 9001 Overshoot 1V MAX * Level C - for high reliability commercial/industrial applications Common Mode Rejection (CMR) 45dB Frequency Range (no load) 75kHz to 1MHz Level M - for general purpose military applications Operating Temperature Range -55C to 130C Level T - for high reliability critical military applications 5 grams Weight Insualtion Resistance (MIN) 10K M @ 250Vdc Dielectric Withstanding Voltage 100Vrms Package B 8 7 6 5 4 3 2 1 .200 5,08 TYP Package F Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .100 2,54 TYP .625 MAX 15,86 3 2 1 8 7 6 5 4 2 1 .100 2,54 TYP .625 MAX 15,86 .200 5,08 TYP 3 .625 15,86 MAX 2 1 .020 .002 .032 O 0,81 TYP 8 7 6 5 4 3 8 7 6 5 4 .625 15,86 MAX .020 .002 O 0,51 0,05 O 0,51 0,05 .250 6,35 MAX .070 .015 1,78 0,38 .250 .030 6,35 0,76 .250 6,35 MAX .004 0,10 MIN .500 12,70 MIN .137 .020 3,48 0,51 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 8 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Dual Ratio SMT QPL Pulse Transformers Characteristics Line Level Military Designation No. Pulse Part No. 1 C M21038/27-11C SMQC1553-6 2 M M21038/27-11 SMQ1553-6 3 T M21038/27-11T SMQT1553-6 4 C M21038/27-12C SMQC1553-7 5 M M21038/27-12 SMQ1553-7 6 T M21038/27-12T SMQT1553-7 7 C M21038/27-13C SMQC1553-8 8 M M21038/27-13 SMQ1553-8 9 T M21038/27-13T SMQT1553-8 10 C M21038/27-15C SMQC1553-10* 11 M M21038/27-15 SMQ1553-10* 12 T M21038/27-15T SMQT1553-10* 13 C M21038/27-16C FPQC1553-6 14 M M21038/27-16 FPQ1553-6 15 T M21038/27-16T FPQT1553-6 16 C M21038/27-17C FPQC1553-7 17 M M21038/27-17 FPQ1553-7 18 T M21038/27-17T FPQT1553-7 19 C M21038/27-18C FPQC1553-8 20 M M21038/27-18 FPQ1553-8 21 T M21038/27-18T FPQT1553-8 22 C M21038/27-20C FPQC1553-10* 23 M M21038/27-20 FPQ1553-10* 24 T M21038/27-20T FPQT1553-10* 25 C M21038/27-27C SMQC1553-45* 26 M M21038/27-27 SMQ1553-45* 27 T M21038/27-27T SMQT1553-45* 28 C M21038/27-31C FPQC1553-45* 29 M M21038/27-31 FPQ1553-45* 30 T M21038/27-31T FPQT1553-45* Package Height (in. MAX) B .250 B .250 B .250 B .250 F .250 F .250 F .250 F .250 B .250 F .250 Terminals Ratio (3%) RDC MAX) ( Impedance MIN) ( 1-3:4-8 1CT:1CT 1-3 3.0 (1-3) 1-3:5-7 1CT:.707CT 4-8 3.0 4,000 1-3:4-8 1.4CT:1CT 1-3 3.5 (1-3) 1-3:5-7 2CT:1CT 4-8 3.0 7,200 1-3:4-8 1.25CT:1CT 1-3 3.2 (1-3) 1-3:5-7 1.66CT:1CT 4-8 3.0 4,000 1-3:4-8 1CT:2.12CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.5CT 4-8 3.5 4,000 1-3:4-8 1CT:1CT 1-3 3.0 (1-3) 1-3:5-7 1CT:.707CT 4-8 3.0 4,000 1-3:4-8 1.4CT:1CT 1-3 3.5 (1-3) 1-3:5-7 2CT:1CT 4-8 3.0 7,200 1-3:4-8 1.25CT:1CT 1-3 3.2 (1-3) 1-3:5-7 1.66CT:1CT 4-8 3.0 4,000 1-3:4-8 1CT:2.12CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.5CT 4-8 3.5 4,000 1-3:4-8 1CT:2.50CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.79CT 4-8 3.5 4,000 1-3:4-8 1CT:2.50CT 1-3 1.0 (4-8) 1-3:5-7 1CT:1.79CT 4-8 3.5 4,000 *NOTE: Designed for transceivers utilizing a single supply voltage (+5V). USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 9 MC118 (1/08) MIL-STD-1553 TRANSFORMERS non-QPL Interface Transformers Overview COTS Transformers Pulse has developed many low-power pulse transformer products in response to the Perry Initiative and its COTS mandate. Several of our QPL transformers have COTS counterparts. They have the same component layout and electrical characteristics but they're built for commercially-oriented requirements, and manufactured in higher volume at lower cost. We've noted where a COTS counterpart to a QPL product exists with the symbol shown here. More non-QPL 1553 Transformers Other non-QPL pulse transformers available have performance and electrical characteristics compliant with MIL-PRF-21038/27, but have been developed for special applications: Low profile for reduced board-stacking height Single- ratio and dual-ratio Single interface and dual interface Vertically stacked dual interface 0-70 C or -40 to +85OC or -55 to +125OC O Hermetically sealed for extreme environments USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 10 MC118 (1/08) MIL-STD-1553 TRANSFORMERS non-QPL Interface Transformers Overview Low profile Dual ratio Through-the-board See page 12 Low profile Dual ratio Surface-mount flat pack See page 13 Low profile Dual ratio Surface-mount gull wing See page 13 Dual interface Low profile Dual ratio Through-the-board See page 14 Dual interface Low profile Dual ratio Surface-mount flat pack See page 15 Dual interface Low profile Dual ratio Surface-mount gull wing See page 15 Dual interface Stacked Dual ratio Through-the-board See page 16 Dual interface Stacked Dual ratio Surface-mount flat pack See page 17 Dual interface Stacked Dual ratio Surface-mount gull wing See page 17 Value Series _ COTS Hermetically Sealed Standard profile Dual-ratio Through-the-board See page 19 Single interface Dual ratio Surface-mount flat pack See page 18 Dual interface Low profile Dual ratio Through-the-board See page 20-21 Dual interface Low profile Dual ratio Surface-mount flat pack See page 20-21 The package shown here as "Value Series COTS" is also available fully qualified to MIL-PRF-21038/27 requirements. See page 6 Dual interface Low profile Dual ratio Surface-mount gull wing See page 20-21 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 11 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile THT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Dual ratio, single interface (see schematic) Through-the-board package For use in MIL-STD-1553 applications Low profile, 0.155 inches height Operating Temp. Prefix Performance to MIL-PRF-21038 requirements 0 to 70C TLC -40 to +85C TLN Built in ISO 9001 facility -55 to +125C TL Applicable specifications: MIL-STD-1553B MIL-PRF-21038 Summary Performance Specifications MIL-STD-202 ISO 9001 Impedance (see table below) Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms 8 7 6 5 4 3 Schematic 2 1 Characteristics 1 Part Number Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) (XXX)1553-1 1-3 : 4-8 1-3 : 5-7 1CT:1CT 1CT:.707CT 1-3 = 3.0 4-8 = 3.0 (1-3) 4,000 (XXX)1553-2 1-3 : 4-8 1-3 : 5-7 1.4CT:1CT 2CT:1CT 1-3 = 3.5 4-8 = 3.0 (1-3) 7,200 (XXX)1553-3 1-3 : 4-8 1-3 : 5-7 1.25CT:1CT 1.66CT:1CT 1-3 = 3.2 4-8 = 3.0 (1-3) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.12CT 1CT:1.5CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.5CT 1CT:1.79CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 (XXX)1553-5 2 (XXX)1553-45 2 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). .630 MAX 16,00 .100 TYP 2,54 .010 TYP 0,25 87 654 Mechanical Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .630 16,00 MAX .155 MAX 3,94 3 2 1 .020 TYP 0,51 .200 TYP 5,08 .700 .020 17,78 0,51 .100 MIN 2,54 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 12 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile SMT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Operating Temperature Flat Pack Prefix Gull Wing Prefix 0 to 70C FLC GLC -40 to +85C FLN GLN -55 to +125C FL GL Dual ratio, single interface (see schematic) Surface Mount, flat pack or gull wing package For use in MIL-STD-1553 applications Low profile, 0.155 inches height Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-PRF-21038 MIL-STD-202 ISO 9001 Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms 8 7 6 5 4 3 Schematic 2 1 Characteristics 1 Part Number Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) (XXX)1553-1 1-3 : 4-8 1-3 : 5-7 1CT:1CT 1CT:.707CT 1-3 = 3.0 4-8 = 3.0 (1-3) 4,000 (XXX)1553-2 1-3 : 4-8 1-3 : 5-7 1.4CT:1CT 2CT:1CT 1-3 = 3.5 4-8 = 3.0 (1-3) 7,200 (XXX)1553-3 1-3 : 4-8 1-3 : 5-7 1.25CT:1CT 1.66CT:1CT 1-3 = 3.2 4-8 = 3.0 (1-3) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.12CT 1CT:1.5CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.5CT 1CT:1.79CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 (XXX)1553-5 2 (XXX)1553-45 2 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). Flat Pack .630 MAX 16,00 .200 5,08 TYP Mechanicals 3 .020 TYP 0,51 2 1 Notes: 1. All dimensions: in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. Gull Wing .155 MAX 3,94 .100 TYP 2,54 .630 MAX 16,00 .200 5,08 TYP 3 8 7 6 5 4 .630 16,00 MAX .010 TYP 0,25 .020 TYP 0,51 2 1 8 7 6 5 4 .155 MAX 3,94 .070 .015 1,78 0,38 .200 MIN 5,08 .100 TYP 2,54 .630 16,00 MAX .010 TYP 0,25 .230 .030 5,84 0,76 .004 0,10 MIN USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 13 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile Dual THT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Operating Temp. Dual ratio, dual interface (see schematic) Through-the-board package For use in MIL-STD-1553 applications Low profile, 0.155 inches height Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 9 MIL-PRF-21038 10 8 ISO 9001 11 Prefix 0 to 70C DTLC -40 to +85C DTLN -55 to +125C DTL Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms 12 13 14 4 15 16 Schematic 7 6 5 3 2 1 Characteristics Part Number 1 (XXXX)1553-1 (XXXX)1553-2 (XXXX)1553-3 (XXXX)1553-5 2 (XXXX)1553-45 2 Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1CT:1CT 1CT:.707CT 1.4CT:1CT 2CT:1CT 1.25CT:1CT 1.66CT:1CT 1CT:2.12CT 1CT:1.5CT 1CT:2.5CT 1CT:1.79CT 1-3, 5-7 = 3.0 16-13, 12-9 = 3.0 (1-3, 5-7) 4,000 1-3, 5-7 = 3.5 16-13, 12-9 = 3.0 (1-3, 5-7) 7,200 1-3, 5-7 = 3.2 16-13, 12-9 = 3.0 (1-3, 5-7) 4,000 1-3, 5-7 = 1.0 16-13, 12-9 = 3.5 (16-13, 12-9) 4,000 1-3, 5-7 = 1.0 16-13, 12-9 = 3.5 (16-13, 12-9) 4,000 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). .930 MAX 23,62 16 Mechanical Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. 14X .100 TYP 2,54 .010 TYP 0,25 9 .630 16,00 MAX .155 MAX 3,94 .700 .020 17,78 0,51 8 .020 TYP 0,51 .100 MIN 2,54 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 14 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile SMT Dual non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Operating Temperature Flat Pack Prefix Gull Wing Prefix 0 to 70C DFLC DGLC -40 to +85C DFLN DGLN -55 to +125C DFL DGL Dual ratio, dual interface (see schematic) Surface Mount, flat pack or gull wing package For use in MIL-STD-1553 applications Low profile, 0.155 inches height Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 9 7 MIL-PRF-21038 10 6 8 ISO 9001 11 Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms Schematic 12 13 14 4 15 16 5 3 2 1 Characteristics Part Number 1 (XXXX)1553-1 (XXXX)1553-2 (XXXX)1553-3 (XXXX)1553-5 2 (XXXX)1553-45 2 Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1-3 : 16-13 / 5-7 : 12-9 1-3 : 15-14 / 5-7 : 11-10 1CT:1CT 1CT:.707CT 1.4CT:1CT 2CT:1CT 1.25CT:1CT 1.66CT:1CT 1CT:2.12CT 1CT:1.5CT 1CT:2.5CT 1CT:1.79CT 1-3, 5-7 = 3.0 16-13, 12-9 = 3.0 (1-3, 5-7) 4,000 1-3, 5-7 = 3.5 16-13, 12-9 = 3.0 (1-3, 5-7) 7,200 1-3, 5-7 = 3.2 16-13, 12-9 = 3.0 (1-3, 5-7) 4,000 1-3, 5-7 = 1.0 16-13, 12-9 = 3.5 (16-13, 12-9) 4,000 1-3, 5-7 = 1.0 16-13, 12-9 = 3.5 (16-13, 12-9) 4,000 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). Flat Pack .930 MAX 23,62 14X .100 TYP 2,54 Mechanicals 16 Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. Gull Wing .010 TYP 0,25 .010 TYP 0,25 9 .630 16,00 MAX .155 MAX 3,94 .155 MAX 3,94 8 .200 MIN 5,08 .020 TYP 0,51 .004 0,10 MIN .230 .030 5,84 0,76 .070 .015 1,78 0,38 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 15 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Stacked Dual THT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Operating Temp. Prefix 0 to 70C STQC -40 to +85C STQN -55 to +125C STQ Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms Dual ratio, dual interface (see schematic) Through-the-board package For use in MIL-STD-1553 applications Vertically stacked for minimum XY area Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 MIL-PRF-21038 ISO 9001 8 (18) 7 (17) 6 (16) 5 (15) 4 (14) 3 (13) Schematic 2 (12) 1 (11) Characteristics Part Number 1 Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) (XXXX)1553-1 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1-3 (11-13) = 3.5 4-8 (14-18) = 3.0 (1-3 & 11-13) 4,000 (XXXX)1553-2 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:1CT 1CT:.707CT 1.4CT:1CT 2CT:1CT 1-3 (11-13) = 3.0 4-8 (14-18) = 3.0 (1-3 & 11-13) 7,200 (XXXX)1553-3 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1.25CT:1CT 1.66CT:1CT 1-3 (11-13) = 3.2 4-8 (14-18) = 3.0 (1-3 & 11-13) 4,000 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:2.12CT 1CT:1.5CT 1-3 (11-13) = 1.0 4-8 (14-18) = 3.5 (4-8 & 14-18) 4,000 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:2.5CT 1CT:1.79CT 1-3 (11-13) = 1.0 4-8 (14-18) = 3.5 (4-8 & 14-18) 4,000 (XXXX)1553-5 2 (XXXX)1553-45 2 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). .340 8,64 MAX .630 MAX 16,00 Mechanical Notes: 1. All dimensions: in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .500 12,70 .100 2,54 18 1 2 3 17 16 15 14 13 12 11 4 5 6 7 8 .375 9,53 MIN .630 16,00 MAX .020 .002 .500 12,70 O 0,51 0,05 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 16 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Stacked Dual SMT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125C. Operating Temperature Flat Pack Prefix Gull Wing Prefix 0 to 70C SFQC SGQC -40 to +85C SFQN SGQN -55 to +125C SFQ SGQ Dual ratio, dual interface (see schematic) Surface Mount package For use in MIL-STD-1553 applications Vertically stacked for minimum XY area Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 MIL-PRF-21038 8 (18) 3 (13) ISO 9001 7 (17) 6 (16) Schematic 2 (12) 5 Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms (15) 4 (14) 1 (11) Characteristics Part Number 1 Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) (XXXX)1553-1 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1-3 (11-13) = 3.5 4-8 (14-18) = 3.0 (1-3 & 11-13) 4,000 (XXXX)1553-2 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:1CT 1CT:.707CT 1.4CT:1CT 2CT:1CT 1-3 (11-13) = 3.0 4-8 (14-18) = 3.0 (1-3 & 11-13) 7,200 (XXXX)1553-3 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1.25CT:1CT 1.66CT:1CT 1-3 (11-13) = 3.2 4-8 (14-18) = 3.0 (1-3 & 11-13) 4,000 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:2.12CT 1CT:1.5CT 1-3 (11-13) = 1.0 4-8 (14-18) = 3.5 (4-8 & 14-18) 4,000 1-3 : 4-8 (11-13 : 14-18) 1-3 : 5-7 (11-13 : 15-17) 1CT:2.5CT 1CT:1.79CT 1-3 (11-13) = 1.0 4-8 (14-18) = 3.5 (4-8 & 14-18) 4,000 (XXXX)1553-5 2 (XXXX)1553-45 2 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). Flat Pack Gull Wing .630 MAX 16,00 .630 MAX 16,00 .100 TYP 2,54 .020 .002 O 0,51 0,05 Mechanicals Notes: 1. All dimensions: in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .340 8,64 MAX 14 15 16 17 18 1312 11 1 2 3 8 7 6 5 4 .630 16,00 MAX 1.125 .030 28,58 0,76 14 15 16 17 18 13 12 11 1 2 3 8 7 6 5 4 .100 TYP 2,54 .630 16,00 MAX .020 .002 O 0,51 0,05 .500 16,00 MIN .070 .015 1,78 0,38 .340 8,64 MAX .250 .030 6,35 0,76 .004 0,10 MIN USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 17 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Hermatically-sealed SMT Dual non-QPL Interface Transformers These hermatically sealed non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27 and provide performance as required over -55 to +125C. Dual ratio, single interface (see schematic) Surface Mount, flat pack package For use in MIL-STD-1553 applications Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 MIL-PRF-21038 ISO 9001 Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz -55 to +125C 5 grams 10K M @ 250Vdc 100Vrms 8 7 6 5 4 3 Schematic 2 1 Characteristics Part Number Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) H1553-1 1-3 : 4-8 1-3 : 5-7 1CT:1CT 1CT:.707CT 1-3 = 3.0 4-8 = 3.0 (1-3) 4,000 H1553-2 1-3 : 4-8 1-3 : 5-7 1.4CT:1CT 2CT:1CT 1-3 = 3.5 4-8 = 3.0 (1-3) 7,200 H1553-3 1-3 : 4-8 1-3 : 5-7 1.25CT:1CT 1.66CT:1CT 1-3 = 3.2 4-8 = 3.0 (1-3) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.12CT 1CT:1.5CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.5CT 1CT:1.79CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 H1553-5 1 H1553-45 1 NOTE: 1. Designed for transceivers utilizing a single supply voltage (+5V). .635 MAX 16,13 .200 5,08 TYP Mechanical 3 .015 TYP 0,38 2 1 Notes: 1. All dimensions are in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .175 MAX 4,45 .100 TYP 2,54 8 7 6 5 4 .635 16,13 MAX .010 TYP 0,25 .250 MIN 6,35 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 18 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Value Series (COTS) THT non-QPL Interface Transformers These non-QPL interface transformers are built and tested in ISO 9001 approved facilities. They conform to all electrical and physical parameters of MIL-PRF-21038/27. Choose one of three operating temperature ranges including 0 to +70C, -40 to +85C, or -55 to +125 C. Operating Temp. Prefix 0 to 70C C -40 to +85C N -55 to +125C TQ Summary Performance Specifications Impedance Droop Overshoot Common Mode Rejection (CMR) Frequency Range (no load) Operating Temperature Range Weight Insualtion Resistance (MIN) Dielectric Withstanding Voltage (see table below) 20% 1V MAX 45dB 75kHz to 1MHz (see table above) 5 grams 10K M @ 250Vdc 100Vrms Dual ratio, single interface (see schematic) Through-the-board package For use in MIL-STD-1553 applications Standard height: 0.250 in. Performance to MIL-PRF-21038 requirements Built in ISO 9001 facility Applicable specifications: MIL-STD-1553B MIL-STD-202 MIL-PRF-21038 ISO 9001 8 7 6 5 4 3 2 Schematic 1 Characteristics Part Number Termimals Ratio (3%) RDC ( MAX) Impedance ( MIN) 1-3 : 4-8 1-3 : 5-7 1CT:1CT 1CT:.707CT 1-3 = 3.0 4-8 = 3.0 (1-3) 4,000 (X)1553-2 1-3 : 4-8 1-3 : 5-7 1.4CT:1CT 2CT:1CT 1-3 = 3.5 4-8 = 3.0 (1-3) 7,200 (X)1553-3 1-3 : 4-8 1-3 : 5-7 1.25CT:1CT 1.66CT:1CT 1-3 = 3.2 4-8 = 3.0 (1-3) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.12CT 1CT:1.5CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 1-3 : 4-8 1-3 : 5-7 1CT:2.5CT 1CT:1.79CT 1-3 = 1.0 4-8 = 3.5 (4-8) 4,000 (X)1553-1 (X)1553-5 1 2 (X)1553-45 2 NOTE: 1. Refer to prefix table (above) to select temperature range. 2. Designed for transceivers utilizing a single supply voltage (+5V). 3 2 1 .625 MAX 15,86 Mechanical Notes: 1. All dimensions: in inches. 2. Tolerances: .xx = +.008 3. All specifications and dimensions are subject to change without notice. .375 9,53 MIN .100 2,54 .200 5,08 8 7 6 5 4 .625 15,86 MAX .250 6,35 MAX .020 .002 .500 12,70 O 0,51 0,05 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 19 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile / Stacked Dual THT and SMT non-QPL Interface Transformers Built and tested to MIL-PRF-21038 Withstands 220C IR/Reflow temperature Operating & storage temperature: -55C to +130C Through-hole, Flat-pack and SMT mount configurations Electrical Specifications Part Number Terminal Configuration Ratio (3%) RDC ( MAX) Impedance ( MIN) Droop Overshoot (MAX) Common Mode Rejection (CMR) Frequency Insulation Dielectric Range Resistance Withstanding (no load) (m MIN) Voltage THROUGH-HOLE 1-3:4-8 (11-13:14-18) 1CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) 20% 1V 1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) SLQT1553-2 20% 1V 1-3:5-7 (11-13:15-17) 2CT:1CT 4-8 (14-18) 3.2 7,200 1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13) SLQT1553-3 20% 1V 1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0 4,000 1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQT1553-5 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQT1553-45 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5 4,000 FLAT PACK 1-3:4-8 (11-13:14-18) 1CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) SLQF1553-1 20% 1V 1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) SLQF1553-2 20% 1V 1-3:5-7 (11-13:15-17) 2CT:1CT 4-8 (14-18) 3.2 7,200 1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13) SLQF1553-3 20% 1V 1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0 4,000 1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQF1553-5 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQF1553-45 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5 4,000 GULL WING 1-3:4-8 (11-13:14-18) 1CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) SLQG1553-1 20% 1V 1-3:5-7 (11-13:15-17) 1.4CT:1CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1.4CT:1CT 1-3 (11-13) 3.5 (1-3 & 11-13) SLQG1553-2 20% 1V 1-3:5-7 (11-13:15-17) 2CT:1CT 4-8 (14-18) 3.2 7,200 1-3:4-8 (11-13:14-18) 1.25CT:1CT 1-3 (11-13) 3.2 (1-3 & 11-13) SLQG1553-3 20% 1V 1-3:5-7 (11-13:15-17) 1.66CT:1CT 4-8 (14-18) 3.0 4,000 1-3:4-8 (11-13:14-18) 1CT:2.12CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQG1553-5 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.5CT 4-8 (14-18) 3.5 4,000 1-3:4-8 (11-13:14-18) 1CT:2.5CT 1-3 (11-13) 1.0 (4-8 & 14-18) SLQG1553-45 20% 1V 1-3:5-7 (11-13:15-17) 1CT:1.79CT 4-8 (14-18) 3.5 4,000 _ _ NOTE: IPC/JDEC J-STD-020A Moisture Sensitivity Through Hole: Level 1 Surface Mount: Level 3 SLQT1553-1 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 45dB 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 75kHz to 1MHz 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 10K @ 250Vdc 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms 100Vrms USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 20 MC118 (1/08) MIL-STD-1553 TRANSFORMERS Low Profile / Stacked Dual THT and SMT non-QPL Interface Transformers Schematic Mechanical .630 MAX 16,00 Flat Pack 14 15 16 17 18 .630 16,00 MAX 1 (11) .020 .002 0,51 0,05 DIA. TYP. 13 12 11 5 (15) 6 (16) 2 (12) 8 7 6 5 4 1 2 3 4 (14) 7 (17) 8 (18) 3 (13) .100 .008 TYP 2,54 0,20 (12 PLACES) .500 MIN 12,70 .630 MAX 16,00 .500 .008 12,54 0,20 Through-Hole 18 .630 16,00 MAX Dimensions: Inches mm Unless otherwise specified, all tolerances are .010 0,25 .280 MAX 7,11 1 2 3 5 16 6 15 7 13 12 11 1.125 .030 28,58 0,76 .630 MAX 16,00 .020 .002 0,51 0,05 DIA. TYP. 4 17 14 Surface Mount .020 .002 0,51 0,05 DIA. TYP. .500 .008 12,54 0,20 1.125 .030 28,58 0,76 8 .630 16,00 MAX 14 15 16 17 18 13 12 11 1 2 3 8 7 6 5 4 .100 .008 TYP 2,54 0,20 (12 PLACES) .100 .008 TYP 2,54 0,20 (12 PLACES) .250 .030 6,35 0,76 .280 MAX 7,11 .375 MIN 9,53 .070 REF 1,78 .004 MIN 0,10 .280 MAX 7,11 USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 21 MC118 (1/08) MIL-STD-1553 TRANSFORMERS WARRANTY Pulse Military Aerospace Division warrants for a period of 90 days from the date of shipment, that under normal use and service, its products will be free from defects in workmanship and material. Pulse Military Aerospace Division's sole responsibility under this warranty is, at its option, to repair or replace, without charge, any defective product or part, or to credit buyer for the purchase price of such defective product, provided: 1) Buyer promptly notifies Pulse Military Aerospace Division in writing within the warranty period, and 2) The defective product or part is returned to Pulse Military Aerospace Division with transportation charges prepaid by Buyer, and 3) Pulse Military Aerospace Division's examination of such product shall disclose to its satisfaction that said defect exists and has not been caused by misuse, neglect, improper installation, repair or alteration, or accident. EXCEPT FOR THE ABOVE WARRANTY AND THE IMPLIED WARRANTY OF TITLE, PULSE MILITARY AEROSPACE DIVISION MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. NO LIABILITY IS ASSUMED FOR EXPENDABLE ITEMS SUCH AS LAMPS AND FUSES. PULSE MILITARY AEROSPACE DIVISION WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES UNDER ANY CIRCUMSTANCES. USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 22 MC118 (1/08) MIL-STD-1553 TRANSFORMERS USA 858 674 8100 * Germany 49 7032 7806 0 * Singapore 65 6287 8998 * Shanghai 86 21 32181071 * China 86 755 33966678 * Taiwan 886 3 4643715 www.pulseeng.com 23 MC118 (1/08) MIL-STD-1553 TRANSFORMERS For More Information: Pulse Worldwide Headquarters Pulse Europe 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 0 Fax: 49 7032 7806 12 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Aerospace Technology Building 10th Kejinan Rd. High-Tech Zone Nanshan District, Shenzhen P.R. China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 Tel: 86 21 32181071 Fax: 86 21 32181396 Tel: 65 6287 8998 Fax: 65 6280 0080 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. 32667 Tel: 886 3 4643715 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2008. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com MC118 (1/08)