SD2931-10 RF power transistor: HF/VHF/UHF N-channel power MOSFETs Datasheet -- production data Features Gold metallization Excellent thermal stability Common source configuration POUT = 150 W min. with 14 dB gain @ 175 MHz Thermally enhanced packaging for lower junction temperatures Description M174 Epoxy sealed The SD2931-10 is a gold metallized N-channel MOS field-effect RF power transistor. Being electrically identical to the standard SD2931 MOSFET, it is intended for use in 50 V dc large signal applications up to 230 MHz. Figure 1. Pin connection The SD2931-10 is mechanical compatible to the SD2931 but offers in addition a better thermal capability (25 % lower thermal resistance), representing the best-in-class transistors for ISM applications, where reliability and ruggedness are critical factors. Table 1. 4 1 3 2 1. Drain 3. Gate 2. Source 4. Source Device summary Order code Marking Base qty. Package Packaging(1) SD2931-10W SD2931-10 25 pcs M174 Plastic tray 1. For more details please refer to Chapter 11: Marking, packing and shipping specifications. December 2012 This is information on a product in full production. Doc ID 7076 Rev 9 1/19 www.st.com 19 Contents SD2931-10 Contents 1 2 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Transient thermal impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Impedance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6 Typical performance @ 175 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Typical performance @ 30 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 9 Test circuit @ 30 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 11 Marking, packing and shipping specifications . . . . . . . . . . . . . . . . . . . 17 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 Doc ID 7076 Rev 9 SD2931-10 Electrical data 1 Electrical data 1.1 Maximum ratings (TCASE = 25 C). Table 2. Absolute maximum ratings Symbol V(BR)DSS(1) VDGR VGS ID PDISS TJ TSTG Parameter Value Unit Drain source voltage 125 V Drain-gate voltage (RGS = 1 M) 125 V Gate-source voltage 20 V Drain current 20 A Power dissipation 389 W Max. operating junction temperature 200 C -65 to +150 C Value Unit 0.45 C/W Storage temperature 1. TJ = 150C 1.2 Thermal data Table 3. Symbol RthJC Thermal data Parameter Junction - case thermal resistance Doc ID 7076 Rev 9 3/19 Electrical characteristics 2 SD2931-10 Electrical characteristics (TCASE = 25 C). 2.1 Static Table 4. Static (per side) Symbol Test conditions Min 125 Typ Max Unit V(BR)DSS VGS = 0 IDS = 100 mA IDSS VGS = 0 VDS = 50 V 50 A VGS = 20 VDS = 0 250 nA IGSS VGS(Q) (1) VDS = 10 V ID = 250 mA VDS(ON) VGS = 10 V ID = 10 A GFS VDS = 10 V ID = 5 A CISS VGS = 0 VDS = 50 V COSS VGS = 0 CRSS VGS = 0 V See table below 3.0 5 V V 6 mho f = 1 MHz 480 pF VDS = 50 V f = 1 MHz 190 pF VDS = 50 V f = 1 MHz 18 pF 1. VGS(Q) sorted with alpha/numeric code marked on unit. 2.2 Dynamic Table 5. Dynamic Symbol Test conditions IDQ = 250 mA Min Max Unit POUT VDD = 50 V f = 175 MHz 150 GPS VDD = 50 V IDQ = 250 mA POUT = 150 W f = 175 MHz 14 15 dB nD VDD = 50 V IDQ = 250 mA POUT = 150 W f = 175 MHz 55 65 % VDD = 50 V IDQ = 250 mA POUT = 150 W f = 175 MHz Load mismatch All phase angles 4/19 Typ Doc ID 7076 Rev 9 10:1 W VSWR SD2931-10 Electrical characteristics Table 6. VGS sorts Symbol Value Symbol Value A 2.0 - 2.1 K 2.9 - 3.0 B 2.1 - 2.2 L 3.0 - 3.1 C 2.2 - 2.3 M 3.1 - 3.2 D 2.3 - 2.4 N 3.2 - 3.3 E 2.4 - 2.5 P 3.3 - 3.4 F 2.5 - 2.6 Q 3.4 - 3.5 G 2.6 - 2.7 R 3.5 - 3.6 H 2.7 - 2.8 S 3.6 - 3.7 J 2.8 - 2.9 Doc ID 7076 Rev 9 5/19 Transient thermal impedance 3 SD2931-10 Transient thermal impedance Figure 2. Transient thermal impedance 3INGLE REPETITIVE PULSE 4HERMAL IMPEDANCE :4(* # # 7 SINGLE PULSE % % % % % 2ECTANGULAR POWER PULSE WIDTH SEC 6/19 Doc ID 7076 Rev 9 % !-6 SD2931-10 Transient thermal impedance Figure 3. Transient thermal impedance model $ISSIPATED0OWE R?7ATTS 2 2 /HM # # # & 2 2 2 /HM # # # & 2 2 2 /HM # # # & 2 2 2 /HM # # # & !-6 Doc ID 7076 Rev 9 7/19 Impedance data 4 SD2931-10 Impedance data Figure 4. Impedance data D ZDL Typical Input Impedance Typical Drain Load Impedance G Zin S Table 7. 8/19 Impedance data Freq ZIN () ZDL () 30 MHz 1.7 - j 5.7 6.8 + j 0.9 175 MHz 1.2 - j 2.0 2.0 + j 2.4 Doc ID 7076 Rev 9 SD2931-10 Typical performance 5 Typical performance Figure 5. Capacitance vs drain-source voltage Figure 6. 10000 Drain current vs gate voltage 20 ID, DRAIN CURRENT (A) C, CAPACITANCE (pF) Tc=-20 C f =1MHz 1000 Ciss Coss 100 Tc=+25 C 15 10 Tc=+80 C VDS = 10 V 5 Crss 0 10 0 10 20 30 40 2 50 2.5 3 VDS, DRAIN-SOURCE VOLTAGE (V) Gate-source voltage vs case temperature Figure 8. 4 4.5 5 5.5 6 Maximum thermal resistance vs case temperature 1.12 0.6 Id =9A 1.08 Id =10A Id =7A Id =5A 1.04 Id =11A 1 0.96 Id =4A Id =2A 0.92 Id =1A 0.88 RTH(j-c) (C/W) VGS, GATE-SOURCE VOLTAGE (NORMALIZED) Figure 7. 3.5 VGS, GATE-SOURCE VOLTAGE (V) 0.56 0.52 0.48 Id =.25A Vds= 10 V 0.84 Id =.1A 0.44 25 0.8 -25 0 25 50 75 100 35 45 55 65 75 85 Tc, CASE TEMPERATURE (C) Tc, CASE TEMPERATURE (C) Figure 9. Safe operating area Ids(A) 100 10 (1) 1 1 10 100 1000 Vds(V) (1) Current in this area may be limited by Rds(on) Doc ID 7076 Rev 9 9/19 Typical performance @ 175 MHz 6 SD2931-10 Typical performance @ 175 MHz Figure 10. Output power vs input power Figure 11. Output power vs input power 270 240 Pout, OUTPUT POWER (W) Pout, OUTPUT POWER (W) 270 Vdd= 50V 210 180 Vdd= 40V 150 120 90 60 f= 175MHz Idq= 250mA 30 0 0 5 10 15 20 180 Tc =+80 C 150 120 90 Vdd= 50V Idq= 250mA f= 175MHz 60 30 0 25 0 5 10 16 70 Nd, EFFICIENCY (%) 80 14 12 10 Vdd=50V Idq=250mA f=175Mhz 25 60 50 40 Vdd=50V Idq=250mA f=175Mhz 30 6 20 0 50 100 150 200 250 0 50 100 Pout, OUTPUT POWER (W) 150 200 250 Pout, OUTPUT POWER (W) Figure 14. Output power vs supply voltage Figure 15. Drain current vs gate-source voltage 270 20 Pin =10W 240 Tc=-20 C ID, DRAIN CURRENT (A) Pout,OUTPUT POWER(W) 20 Figure 13. Efficiency vs output power 18 210 Pin =5W 180 150 Pin =2.5W 120 90 60 Tc=+25 C 15 10 Tc=+80 C 5 Idq= 250mA f= 175MHz 30 0 0 24 28 32 36 40 44 48 52 2 2.5 3 3.5 4 4.5 5 VGS, GATE-SOURCE VOLTAGE (V) Vdd,DRAIN VOLTAGE(V) 10/19 15 Pin, INPUT POWER(W) Figure 12. Power gain vs output power Gp, POWER GAIN (dB) Tc =+25 C 210 Pin, INPUT POWER (W) 8 Tc =-20 C 240 Doc ID 7076 Rev 9 5.5 6 SD2931-10 7 Test circuit Test circuit Figure 16. 175 MHz schematic (production test circuit) Note: All dimensions in inches REF. 1021579C Table 8. Component part list Component Description T1 4:1 transformer, 25 ohm flexible coax .090 OD 6" long T2 1:4 transformer, 25 ohm semi-rigid coax .141 OD 6" long FB1 Toroid X 2, 0.5" OD .312" ID 850 2 turns FB2, FB3 VK200 FB4 Shield bead, 1" OD 0.5" ID 850 3 turns L1 1/4 wave choke, 50 ohm semi-rigid coax .141 OD 12" Long PCB 0.62" woven fiberglass, 1 oz. copper, 2 sides, r = 2.55 R1, R3 470 ohm 1 W chip resistor R2 360 ohm 1/2 W resistor R4 20 Kohm 10 turn potentiometer R5 560 ohm 1 W resistor C1, C11 470 pF ATC chip cap C2 43 pF ATC chip cap C3, C8, C9 Arco 404, 12-65 pF C4 Arco 423, 16-100 pF Doc ID 7076 Rev 9 11/19 Test circuit SD2931-10 Table 8. Component part list (continued) Component Description C5 120 pF ATC chip cap C6 0.01 F ATC chip cap C7 30 pF ATC chip cap C10 91 pF ATC chip cap C12, C15 1200 pF ATC chip cap C13, C14,C16, C17 0.01 F / 500 V chip cap C18 10 F 63 V electrolytic capacitor 4 inches Figure 17. 175 MHz test circuit photomaster 6.4 inches Figure 18. 175 MHz test circuit 12/19 Doc ID 7076 Rev 9 SD2931-10 8 Typical performance @ 30 MHz Typical performance @ 30 MHz Figure 19. Output power vs input power Figure 20. Power gain vs output power 30 PG, POWER GAIN (dB) Pout, OUTPUT POWER (W) 250 Vdd = 50 V 200 150 Vdd = 40 V 100 f = 30 MHz IDQ = 250 mA 50 0 0 0.1 0.2 0.3 0.4 29 28 27 f = 30 MHz VDD = 50 V IDQ = 250 mA 26 25 24 0.5 0 40 Pin, INPUT POWER (W) 80 120 160 200 Pout, OUTPUT POWER (W) Figure 21. Efficiency vs output power Figure 22. Output power vs supply voltage 70 200 Pin=.31 W 50 Pin=.22 W 150 Pout(W) Efficiency (%) 60 40 30 f = 30 MHz VDD = 50 V IDQ = 250 mA 20 10 100 Pin=.13 W 50 f = 30 MHz IDQ = 250 mA 0 0 40 80 120 160 200 0 24 Pout, OUTPUT POWER (W) 28 32 36 40 44 48 52 VDD(V) Pout, OUTPUT POWER (W) Figure 23. Output power vs gate voltage 200 T= +25 C T= -20 C 150 T= +80 C 100 VDD = 50 V IDQ = 250 mA f = 30 MHz Pin = Constant 50 0 0 1 2 3 4 5 6 VGS GATE-SOURCE VOLTAGE (V) Doc ID 7076 Rev 9 13/19 Test circuit @ 30 MHz 9 SD2931-10 Test circuit @ 30 MHz Figure 24. 30 MHz test circuit schematic (engineering test circuit) Figure 25. 30 MHz test circuit part list Symbol T1 9:1 transformer, 25 flexible coax with extra shield .090 OD 15" long T2 1:4 transformer, 50 flexible coax .225 OD 15" long FB1 Toroid 1.7" OD .30" ID 220 4 turns FB2 Surface mount EMI shield bead FB3 Toroid 1.7" OD .300" ID 220 3 turns RFC1 Toroid 0.5" OD 0.30" ID 125 4 turns 12 awg wire PCB 0.62" woven fiberglass, 1 oz. Copper, 2 Sides, r = 2.55 R1, R3 R2 14/19 Description 1 K 1 W chip resistor 680 3 W wirewound resistor C1,C4,C6,C7,C8, C9, C11,C12,C13 0.1 F ATC chip cap C2, C3 750 pF ATC chip cap C5 470 pF ATC chip cap C10 10 F 63 V electrolytic capacitor C14 100 F 63 V electrolytic capacitor Doc ID 7076 Rev 9 SD2931-10 10 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. Doc ID 7076 Rev 9 15/19 Package mechanical data Table 9. SD2931-10 M174 (0.500 DIA 4/L N/HERM W/FLG) mechanical data mm. Inch Dim. Min A Typ 5.56 B Max Min 5.584 0.219 3.18 Typ Max 0.230 0.125 C 6.22 6.48 0.245 0.255 D 18.28 18.54 0.720 0.730 E 3.18 0.125 F 24.64 24.89 0.970 0.980 G 12.57 12.83 0.495 0.505 H 0.08 0.18 0.003 0.007 I 2.11 3.00 0.083 0.118 J 3.81 4.45 0.150 0.175 K 7.11 0.280 L 25.53 26.67 1.005 1.050 M 3.05 3.30 0.120 0.130 Figure 26. M174 (0.500 DIA 4/L N/HERM W/FLG) package dimensions Controlling Dimension: Inches 16/19 1011000D Doc ID 7076 Rev 9 SD2931-10 11 Marking, packing and shipping specifications Marking, packing and shipping specifications Table 10. Packing and shipping specifications Order code Packaging Pcs per tray Dry pack humidity VGS Lot code SD2931-10W Plastic tray 25 < 10 % Not mixed Not mixed Figure 27. Marking drawing Table 11. Marking specifications Symbol Description W Wafer process code X VGS sort CZ Assembly plant xxx Last 3 digit of diffusion lot VY Diffusion plant MAR County of origin CZ Test and finishing plant y Assembly year yy Assembly week Doc ID 7076 Rev 9 17/19 Revision history 12 SD2931-10 Revision history Table 12. 18/19 Document revision history Date Revision Changes 09-Sep-2004 4 17-Jun-2004 5 Updated Table 5: Dynamic on page 4 04-Mar-2008 6 Updated Table 4: Static (per side), Table 5: Dynamic and Table 6: VGS sorts on page 5 08-Feb-2011 7 Inserted Chapter 11: Marking, packing and shipping specifications. 12-Jan-2012 8 Inserted Chapter 3: Transient thermal impedance. 19-Dec-2012 9 Updated Table 10: Packing and shipping specifications Doc ID 7076 Rev 9 SD2931-10 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 7076 Rev 9 19/19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: SD2931-10 SD2931-10W