INTERCONNECTS .030" dia. Pins, Straight and Right Angle Single Row Series 800, 801 * Receptacles accept .030" diameter and .025" square pins such as Series 890 and 892 pin headers. * Pin interconnects available with straight (MM# 7007) or right angle (MM# 5005) solder tails. (See page 173 for details) Fig. 1 * Sockets are available with straight (MM# 1304) or right angle (MM# 1305) solder tails. (See pages 146 & 147 for details) Ordering Information Series 800...10-001 Straight Pin Header 800-XX-0_ _-10-001000 Fig. 1 Specify # of pins Fig. 2 Series 800...20-001 Fig. 2 01-64 Right Angle Pin Header 800-XX-0 _ _-20-001000 Specify # of pins XX= Plating Code See Below SPECIFY PLATING CODE XX= Fig. 3 Pin Plating For RoHS compliance, select plating code. For the gold option (XX=10) also change part number from 80X-XX-0XX-10-002000 to 80X-10-0XX-10-002100 10 90 10" Au 200" Sn/Pb Series 801...10-001 Fig. 3 02-64 40 200" Sn Straight Socket 801-XX-0_ _-10-001000 Specify # of pins Fig. 4 01-50 Series 801...20-001 Right Angle Socket 801-XX-0 _ _-20-001000 Specify # of pins Fig. 4 Fig. 5 Series 801...40-002 SMT Right Angle Socket 801-XX-0 _ _-40-002000 Specify # of pins A = Number of Pins (2-10) x .100" XX= Plating Code See Below SPECIFY PLATING CODE XX= Fig. 5 w w w. m i l l - m a x . c o m 01-50 13 Sleeve (Pin) 10" Au Contact (Clip) 30" Au 79 91 02-10 For RoHS compliance, select plating code. For the all gold option (XX=13) also change part number from 80X-XX-0XX-10-0X2000 to 80X-13-0XX-10-0X2100 93 99 41 43 44 200" Sn/Pb 200" Sn/Pb 200"Sn/Pb 200"Sn 200"Sn 200"Sn 10" Au 30" Au 200"Sn/Pb 10" Au 30" Au 200"Sn 516-922-6000