EEUTA1A471 - Panasonic - Product.Live

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ TA

– EE111 –

φ8

φD±0.5

φd±0.05

F±0.5

Sleeve

14 min.

3 min.

✽L

(φ16҂15, φ18҂15:L±1.5)

✽L<16:L±1.0

L>20:L±2.0

Pressure relief +

–

φ10<

φD±0.5

Radial Lead Type

Series: TA Type: A

■Di men sions in mm (not to scale)

Body Dia. φD81012.51618

Lead Dia. φd0.60.60.6 0.8 0.8

Lead space F 3.5 5.0 5.0 7.5 7.5

(mm)

■Features

● Endurance: 125 °C 2000 h

● Heat cycle: 1000 cycle –40 °C to +125 °C

● RoHS directive compliant

■Speciﬁ cations

Category Temp. Range –40 °C to + 125 °C

Rated W.V. Range 10 V .DC to 63 V .DC

Nominal Cap. Range 1 µF to 4700 µF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater)

tan δ

W.V.(V) 10 16 25 35 50 63 (120Hz / +20 °C)

tan δ0.20 0.16 0.14 0.12 0.10 0.09

For capacitance value > 1000 µF , add 0.02 per every 1000 µF.

Endurance

After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum

of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,

when the capacitors are restored to 20 °C, the capacitors, shall meet the limits speciﬁ ed below.

Capacitance change ±30% of initial measured value

tan δ< 300 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

W.V.

(V.DC) Cap. (µF) Frequency (Hz)

60 120 1 k 10 k 100 k

10 to 63

1 to 330 0.55 0.65 0.85 0.90 1.00

470 to 1000 0.70 0.75 0.90 0.95 1.00

2200 to 4700 0.75 0.80 0.90 0.95 1.00

■Frequency correction factor for ripple current

[mm]

Sep. 201000

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ TA

– EE112 –

■Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(100 kHz)

(+125 °C)

Imped-

ance

(100 kHz)

(+20 °C)

Lead

Dia.

Lead Space

Straight

Leads Taping

Straight Taping

✽B

(V) (µF) (mm) (mm)

(mA r.m.s.)

(액)(mm)(mm) (mm) (pcs) (pcs)

330 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1A331( ) 200 1000

470 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1A471( ) 200 500

1000 10 20 1100 0.057 0.6 5.0 5.0 EEUTA1A102 ( ) 200 500

12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1A102S ( ) 200 500

2200

12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1A222L( ) 200 500

16 20 1985 0.032 0.8 7.5 7.5 EEUTA1A222( ) 100 250

18 15 1800 0.042 0.8 7.5 7.5 EEUTA1A222S( ) 100 250

3300 16 25 2300 0.024 0.8 7.5 7.5 EEUTA1A332( ) 100 250

18 20 2250 0.031 0.8 7.5 7.5 EEUTA1A332S( ) 100 250

4700 16 31.5 2710 0.020 0.8 7.5 EEUTA1A472 100

18 25 2470 0.022 0.8 7.5 7.5 EEUTA1A472S( ) 100 250

220 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1C221( ) 200 1000

330 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1C331( ) 200 500

470 10 16 945 0.075 0.6 5.0 5.0 EEUTA1C471( ) 200 500

1000 12.5 20 1490 0.042 0.6 5.0 5.0 EEUTA1C102( ) 200 500

16 15 1520 0.047 0.8 7.5 7.5 EEUTA1C102S( ) 100 250

2200 16 25 2300 0.024 0.8 7.5 7.5 EEUTA1C222( ) 100 250

18 20 2250 0.031 0.8 7.5 7.5 EEUTA1C222S( ) 100 250

3300 16 31.5 2710 0.020 0.8 7.5 EEUTA1C332 100

18 25 2470 0.022 0.8 7.5 7.5 EEUTA1C332S( ) 100 250

4700 18 31.5 3270 0.018 0.8 7.5 EEUTA1C472 50

100 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1E101( ) 200 1000

220 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1E221( ) 200 500

330 10 16 945 0.075 0.6 5.0 5.0 EEUTA1E331( ) 200 500

470 10 20 1100 0.057 0.6 5.0 5.0 EEUTA1E471( ) 200 500

12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1E471S( ) 200 500

1000

12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1E102L( ) 200 500

16 20 1985 0.032 0.8 7.5 7.5 EEUTA1E102( ) 100 250

18 15 1800 0.042 0.8 7.5 7.5 EEUTA1E102S( ) 100 250

2200 16 31.5 2710 0.020 0.8 7.5 EEUTA1E222 100

18 25 2470 0.022 0.8 7.5 7.5 EEUTA1E222S( ) 100 250

3300 18 35.5 3310 0.017 0.8 7.5 EEUTA1E332 50

100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1V101( ) 200 500

220 10 16 765 0.130 0.6 5.0 5.0 EEUTA1V221( ) 200 500

330 10 20 930 0.100 0.6 5.0 5.0 EEUTA1V331( ) 200 500

470 12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1V471( ) 200 500

16 15 1450 0.088 0.8 7.5 7.5 EEUTA1V471S( ) 100 250

1000 16 25 2010 0.037 0.8 7.5 7.5 EEUTA1V102( ) 100 250

18 20 2180 0.046 0.8 7.5 7.5 EEUTA1V102S( ) 100 250

2200 18 35.5 2790 0.025 0.8 7.5 EEUTA1V222 50

Endurance : 125 °C 2000 h

When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.

The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

Nov. 201101

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ TA

– EE113 –

■Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(100 kHz)

(+125 °C)

Imped-

ance

(100 kHz)

(+20 °C)

Lead

Dia.

Lead Space

Straight

Leads Taping

Straight Taping

✽B

(V) (µF) (mm) (mm)

(mA r.m.s.)

(액)(mm)(mm) (mm) (pcs) (pcs)

1 8 11.5 352.00 0.6 3.5 5.0EEUTA1H1R0( ) 200 1000

2.2 8 11.5501.800.63.55.0

EEUTA1H2R2( ) 200 1000

3.3 8 11.5 60 1.50 0.6 3.5 5.0 EEUTA1H3R3( ) 200 1000

4.7 8 11.5 85 1.15 0.6 3.5 5.0 EEUTA1H4R7( ) 200 1000

10 8 11.5 180 0.950 0.6 3.5 5.0 EEUTA1H100( ) 200 1000

22 8 11.5 250 0.650 0.6 3.5 5.0 EEUTA1H220( ) 200 1000

33 8 11.5 300 0.450 0.6 3.5 5.0 EEUTA1H330( ) 200 1000

47 8 11.5 440 0.350 0.6 3.5 5.0 EEUTA1H470S( ) 200 1000

100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1H101( ) 200 500

220 10 20 930 0.100 0.6 5.0 5.0 EEUTA1H221( ) 200 500

330 12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1H331( ) 200 500

16 15 1450 0.088 0.8 7.5 7.5 EEUTA1H331S( ) 100 250

470

12.5 25 1650 0.055 0.6 5.0 5.0 EEUTA1H471L( ) 200 500

16 20 1650 0.053 0.8 7.5 7.5 EEUTA1H471( ) 100 250

18 15 1710 0.075 0.8 7.5 7.5 EEUTA1H471S( ) 100 250

1000 16 31.5 2430 0.031 0.8 7.5 EEUTA1H102 100

18 25 2350 0.032 0.8 7.5 7.5 EEUTA1H102S( ) 100 250

22 8 11.5 310 0.470 0.6 3.5 5.0 EEUTA1J220( ) 200 1000

33 10 12.5 410 0.360 0.6 5.0 5.0 EEUTA1J330( ) 200 500

47 10 16 460 0.270 0.6 5.0 5.0 EEUTA1J470( ) 200 500

100 10 20 680 0.205 0.6 5.0 5.0 EEUTA1J101( ) 200 500

220

12.5 25 1325 0.100 0.6 5.0 5.0 EEUTA1J221L( ) 200 500

16 20 1360 0.085 0.8 7.5 7.5 EEUTA1J221( ) 100 250

18 15 1300 0.120 0.8 7.5 7.5 EEUTA1J221S( ) 100 250

330 16 25 1660 0.070 0.8 7.5 7.5 EEUTA1J331( ) 100 250

18 20 1760 0.077 0.8 7.5 7.5 EEUTA1J331S( ) 100 250

470 16 31.5 2055 0.060 0.8 7.5 EEUTA1J471 100

18 25 1990 0.060 0.8 7.5 7.5 EEUTA1J471S( ) 100 250

Endurance : 125 °C 2000 h

When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.

The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.

Nov. 201101