MBR2060CT, MBR2080CT, MBR2090CT, MBR20100CT MBR2060CT and MBR20100CT are Preferred Devices SWITCHMODE Power Rectifiers . . . using the Schottky Barrier principle with a platinum barrier metal. These state-of-the-art devices have the following features: * * * * * * * * 20 Amps Total (10 Amps Per Diode Leg) Guard-Ring for Stress Protection Low Forward Voltage 150C Operating Junction Temperature Epoxy Meets UL94, VO at 1/8 Low Power Loss/High Efficiency High Surge Capacity Low Stored Charge Majority Carrier Conduction http://onsemi.com SCHOTTKY BARRIER RECTIFIERS 20 AMPERES 60-100 VOLTS 1 2, 4 3 Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.9 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * 4 Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: B2060, B2080, B2090, B20100 TO-220AB CASE 221A PLASTIC 1 2 3 MARKING DIAGRAM MAXIMUM RATINGS Please See the Table on the Following Page YY WW B20x0 AKA YY WW B20x0 x AKA = Year = Work Week = Device Code = 6, 8, 9 or 10 = Polarity Designator ORDERING INFORMATION Device Package Shipping MBR2060CT TO-220 50 Units/Rail MBR2080CT TO-220 50 Units/Rail MBR2090CT TO-220 50 Units/Rail MBR20100CT TO-220 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 - Rev. 4 1 Publication Order Number: MBR2060CT/D MBR2060CT, MBR2080CT, MBR2090CT, MBR20100CT MAXIMUM RATINGS (Per Diode Leg) MBR Symbol 2060CT 2080CT 2090CT 20100CT Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 60 80 90 100 Volts Average Rectified Forward Current (Rated VR) TC = 133C IF(AV) 10 Amps Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 133C IFRM 20 Amps Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 Amps Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 0.5 Amp TJ 65 to +150 C Storage Temperature Tstg 65 to +175 C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s RJC RJA 2.0 60 C/W Rating Operating Junction Temperature THERMAL CHARACTERISTICS Maximum Thermal Resistance -- Junction to Case -- Junction to Ambient ELECTRICAL CHARACTERISTICS (Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1.) (iF = 10 Amps, TC = 125C) (iF = 10 Amps, TC = 25C) (iF = 20 Amps, TC = 125C) (iF = 20 Amps, TC = 25C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TC = 125C) (Rated dc Voltage, TC = 25C) iR Volts 0.75 0.85 0.85 0.95 mA 6.0 0.1 1. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. http://onsemi.com 2 50 TJ = 150C 20 10 100C 125C 5.0 IR , REVERSE CURRENT (mA) 150C 3.0 TJ = 25C 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.9 0.8 125C 100C 1.0 0.1 1.0 25C 40 60 80 100 120 vF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Per Diode Figure 2. Typical Reverse Current Per Diode 20 RATED VOLTAGE APPLIED RJC = 2C/W 18 16 14 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 2.0 110 20 0 120 130 140 150 160 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 0 0 10 0.01 0.5 (HEATSINK) RJA = 16C/W (NO HEATSINK) RJA = 60C/W 18 16 14 12 10 RATED VOLTAGE APPLIED dc 8.0 6.0 4.0 dc SQUARE WAVE 2.0 0 0 20 60 40 80 100 120 140 160 TA, AMBIENT TEMPERATURE (C) Figure 3. Current Derating, Case Figure 4. Current Derating, Ambient 20 IPK/IAV = 5.0 TA = 25C 18 IPK/IAV = 16 IPK/IAV = 10 14 12 dc 10 IPK/IAV = 20 8.0 SQUARE WAVE 6.0 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 18 AVERAGE CURRENT (AMPS) Figure 5. Average Power Dissipation and Average Current http://onsemi.com 3 140 20 TC, CASE TEMPERATURE (C) AVERAGE POWER (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) MBR2060CT, MBR2080CT, MBR2090CT, MBR20100CT 20 180 200 MBR2060CT, MBR2080CT, MBR2090CT, MBR20100CT PACKAGE DIMENSIONS TO-220 PLASTIC CASE 221A-09 ISSUE AA -T- B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBR2060CT/D