308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Devi ce
Raychem Circuit Protection Products
PRODUCT: RHEF450
DOCUMENT: SCD 25205
PCN: F25880
REV LETTER: D
REV DATE: AUGUST 14, 2007
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Electrical Rating
Voltage: 16VDC MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin Plated Copper
(0.8 mm [0.032] nom. diameter)
Marking:
TABLE I. DIMENSIONS:
A B C D E F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TYP
mm: -- 10.4 -- 15.6 4.3 5.8 7.6 -- -- 3.0 1.2
in*: -- (0.41) -- (0.61) (0.17) (0.23) (0.30) -- -- (0.12) (0.05)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
I HOLD
RATED
CURRENT
CURRENT
RATINGS TIME TO
TRIP INITIAL
RESISTANCE
VALUES
ONE-HOUR
POST-TRIP
RESISTANCE
STANDARD
TRIP
TRIPPED-
STATE
POWER
DISSIPATION
AMPS
25°C AMPS
AT 25°C SECONDS AT
25°C, 22.5A OHMS
AT 25°C OHMS
AT 25°C WATTS AT
25°C 16V
HOLD HOLD TRIP MAX MIN MAX MAX TYP
4.5 4.5 7.8 3.0 0.022 0.036 0.054 3.6
Agency Recognitions: UL, CSA, TUV
Reference Documents: PS300
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant ELV Compliant Pb-Free
© 2004, 2007 Tyco Electronics Corporation. All rights reserved.