BIAS 1 Watt Power Supply BPSX 1 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPSX 1-08-00, -08-33, -08-50 BPSX 1-14-00, -14-33, -14-50 The BPSX is a revolutionary, micro-sized, drop-in switching power supply module. It contains patented technology with unique features that provide solutions for a wide range of applications, including low power wireless and many other intelligent control devices. The patented SMPS topology is totally different from any other: It's Quiet: Switching is synchronized and occurs only 10% of the time, so there is very little EMI / EMC interference with other circuits. This means no extra filtering or shielding is needed, helping to achieve longer transmission range with more reliable data communication in low power wireless applications. Actual Size Features: * * * * * * * * Extended Temperature with NO DE-RATING! (-40 to +85C ) Universal Input (85-265 VAC, 50/60Hz) Small Size--0.55in3 [9.0cm3] Low no-load input power <30mW Constant power mode (not current limit) 3000 VAC Isolation EN 55022, Class B; FCC Part 15, Class B Meets UL/CSA and EN Product Safety (ITE) It's Powerful: No power de-rating across the full wide temperature range. No current limit design margin needed when selecting a module. Charge Bias Power AC/DC power supplies are available with two different types of outputs to fit your applications... large super caps faster than any regular SMPS with twice the power rating. The characteristics of the main (Vo) and auxiliary (Vr) outputs It's Green: High efficiency with ultra low standby power and very little self are different and each has application-specific benefits which generated heat make it ideal for intelligent devices such as smart-sensors, can provide high value to the system designer: smart-meters, smart-lighting, smart-grid, M2M or IoT , and any other control Vo is a voltage-regulated output which has a constant power applications. Operating Specifications (@120VAC / 60 Hz / 25C unless otherwise specified) Electrical Input Voltage Range Input Surge Withstand Output Power (Pmax) Efficiency Output Vo (Peak) Line / Load Regulation Vo (Peak) Temperature Regulation Vo (Peak) Ripple Vo (@120 Hz) (@ 100 kHz) Output Vr, 3.3 volt (+/- 5%) Output Vr, 5.0 volt (+/- 5%) No-load Consumption Isolation Earth Leakage @ 120 VAC Short Circuit Protection Reliability @ 25 C, MIL HDBK-217F Thermal Operating Temperature Operating Relative Humidity Storage Temperature Mechanical Package Size (L x W x H) Safety Safety Compliance EMI Emissions 85 - 265 VAC (50/60Hz) 308V, < 30 sec 1.0 W (60Hz) 0.83 W (50Hz) 70% nom. 8 or 14 VDC nom. +/- 5% +/- 1% Po < Pmax +/- 2% Po < Pmax 1.00 V p:p 0.25 V p:p For Vo = 8V, Ir out 53mA max, Io+Ir 125mA* For Vo = 14V, Ir out 23mA max, Io+Ir 71mA* For Vo = 8V, Ir out 83mA max, Io+Ir 125mA* For Vo = 14V, Ir out 28mA max, Io+Ir 71mA* 30 mW typical @ Vin=120 VAC 3000 VAC (meets UL / CSA & EN Product Safety) < 10 uA Continuous, Pin 0.6 w @ Vin = 120 VAC > 500 Khr MTBF mode instead of a conventional current limit. This output is best suited as a source for isolated DC utility power, which may be used directly or post-regulated with either a linear regulator or a DC/DC converter. Vo is self protecting, cannot be overloaded and can be shorted indefinitely. So unlike design-yourown, or partially complete modules where significant design margin is required to stay far away from current limit, there is no need to oversize a Bias Power supply. The graceful transition from voltage regulation to constant power along with the wide range of product ratings allows the designer to select a supply tightly matched to the design load. Vr is also a voltage-regulated output and is thermally protected from overload. It has very low output ripple capable of driving elements which require a low-noise, tightly-regulated supply. In addition, Vr is supplied internally by Vo. This means that any capacitance added to Vo can increase the hold-up time of Vr as well. *Note: maximum currents specified for constant voltage range only. See V-I curve on page 2 for Vo in constant power range. -40 to +85 C 0 - 95%, non-condensing -40 to 105 C 1.10 x 0.92 x 0.55 inches [27.94 x 23.24 x 13.97 mm] UL / EN 60950-1 2nd Ed. (CB Report Available) EN 55022, Class B, FCC Part 15, Class B www.biaspower.com BPSX 1 Series Data Sheet, Page 1 of 2 Revised 12/10/2013 Specifications subject to change BIAS 1 Watt Power Supply BPSX 1 Series Data Sheet Single (Vo) or Dual (Vo & Vr) output BPSX 1-08-00, -08-33, -08-50 BPSX 1-14-00, -14-33, -14-50 Part Number Designation Part Number Output Configuration Vo Vr BPSX 1-08-00 Single output 8 VDC N/A BPSX 1-14-00 Single output 14 VDC N/A BPSX 1-08-33 Dual Output 8 VDC 3.3 VDC BPSX 1-08-50 Dual Output 8 VDC 5 VDC BPSX 1-14-33 Dual Output 14 VDC 3.3 VDC BPSX 1-14-50 Dual Output 14 VDC 5 VDC 1. Recommended Land Pattern, top view 2. PIN DESCRIPTION L1 Input High L2 Input Low N/C No Connection Vo Output GND Ground Vr Vr Output N/C No Connection NOTES Pins 0.031" [0.787 mm] round Pins extend 0.125" [3.175 mm] below stand-offs Recommended Isolation, Bottom View V-I Curve (For Vo in Constant Power Range) Vo, volts V-I, typical 10 9 8 7 6 5 4 3 2 1 0 Constant Power Region 0 www.biaspower.com 100 200 Io, mA 300 400 500 BPSX 1 Series Data Sheet, Page 2 of 2 Revised 12/10/2013 Specifications subject to change