TCR2BF115 - Toshiba America Electronic Components, Inc.

TCR2BF series, TCR2BE series

2011-06-06

1

TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic

TCR2BF series

TCR2BE series

200 mA CMOS Low Drop-Out Regulator with Auto-discharge

The TCR2BF series and TCR2BE series are CMOS

general-purpose single-output voltage regulators with an on/off

control input, featuring low dropout voltage and low quiescent bias

current. These voltage regulators can be enabled and disabled via

the CONTROL pin.

These voltage regulators are available in fixed output voltages

between 1.0 V and 5.0 V in SMV package, 1.0 to 3.6V in ESV

package, and capable of driving up to 200 mA. They feature

overcurrent protection and auto-discharge function.

The TCR2BF series and TCR2BE series are offered in the

compact SMV (SOT-25)(SC-74A) and ESV (SOT-553) and allow the

use of small ceramic input and output capacitors. Thus, these

devices are ideal for portable applications that require high-density

board assembly such as cellular phones.

Features

• Wide fixed output voltage line up

TCR2BF series (SMV package) : VOUT = 1.0 to 5.0 V

TCR2BE series (ESV package) : VOUT = 1.0 to 3.6 V

• Low output noise voltage ( VNO = 50 μVrms (typ.) at 2.8 V-output, IOUT = 10 mA, 10 Hz

<

=

f

<

=

100 kHz)

• Low quiescent bias current ( IB = 75 μA (max) at IOUT = 0 mA )

• Low stand-by current ( IB(OFF) = 0.1 μA (typ.) at Stand-by mode )

• High ripple rejection ( R.R. = 70 dB (typ.) at IOUT = 10 mA, f =1kHz )

• Overcurrent protection

• Auto-discharge

• Pull-down connection at CONTROL

• Ceramic capacitors can be used ( CIN = 0.1μF, COUT =1.0 μF )

• Small package, SMV (SOT-25) (SC-74A) and ESV (SOT-553)

Pin Assignment (top view)

SMV (SOT-25)(SC-74A) ESV (SOT-553)

Weight:

SMV (SOT-25)(SC-74A) : 16 mg (typ.)

ESV (SOT-553) : 3.0 mg (typ.)

SMV

ESV

VOUT

CONTROL GND

NC

VIN

13

2

4

5

VOUT

CONTROL GND

NC

VIN

1 3

2

4

5

TCR2BF series, TCR2BE series

2011-06-06

2

List of Products Number, Output Voltage, and Marking

Product No. Product No.

SMV(SOT-25) ESV(SOT-553)

VOUT

(V)(typ.) Marking

SMV(SOT-25) ESV(SOT-553)

VOUT

(V)(typ.) Marking

TCR2BF10 TCR2BE10 1.0 1M0 TCR2BF29* TCR2BE29* 2.9 2M9

TCR2BF105* TCR2BE105* 1.05 1MA TCR2BF295* TCR2BE295* 2.95 2ME

TCR2BF11* TCR2BE11* 1.1 1M1 TCR2BF30 TCR2BE30 3.0 3M0

TCR2BF115 TCR2BE115 1.15 1MB TCR2BF31 TCR2BE31 3.1 3M1

TCR2BF12 TCR2BE12 1.2 1M2 TCR2BF32 TCR2BE32 3.2 3M2

TCR2BF125 TCR2BE125 1.25 1MC TCR2BF33 TCR2BE33 3.3 3M3

TCR2BF13* TCR2BE13* 1.3 1M3 TCR2BF34* TCR2BE34* 3.4 3M4

TCR2BF14* TCR2BE14* 1.4 1M4 TCR2BF35* TCR2BE35* 3.5 3M5

TCR2BF15 TCR2BE15 1.5 1M5 TCR2BF36 TCR2BE36 3.6 3M6

TCR2BF16* TCR2BE16* 1.6 1M6 TCR2BF37* ― 3.7 3M7

TCR2BF17* TCR2BE17* 1.7 1M7 TCR2BF38* ― 3.8 3M8

TCR2BF175* TCR2BE175* 1.75 1MF TCR2BF39* ― 3.9 3M9

TCR2BF18 TCR2BE18 1.8 1M8 TCR2BF40 ― 4.0 4M0

TCR2BF19* TCR2BE19* 1.9 1M9 TCR2BF41* ― 4.1 4M1

TCR2BF20* TCR2BE20* 2.0 2M0 TCR2BF42* ― 4.2 4M2

TCR2BF21* TCR2BE21* 2.1 2M1 TCR2BF43* ― 4.3 4M3

TCR2BF22* TCR2BE22* 2.2 2M2 TCR2BF44* ― 4.4 4M4

TCR2BF23* TCR2BE23* 2.3 2M3 TCR2BF45 ― 4.5 4M5

TCR2BF24* TCR2BE24* 2.4 2M4 TCR2BF46* ― 4.6 4M6

TCR2BF25 TCR2BE25 2.5 2M5 TCR2BF47* ― 4.7 4M7

TCR2BF26* TCR2BE26* 2.6 2M6 TCR2BF48* ― 4.8 4M8

TCR2BF27 TCR2BE27 2.7 2M7 TCR2BF49* ― 4.9 4M9

TCR2BF28 TCR2BE28 2.8 2M8 TCR2BF50 ― 5.0 5M0

TCR2BF285* TCR2BE285* 2.85 2MD

Please contact your local Toshiba representative if you are interested in products with * sign

Marking (top view)

Example: TCR2BF33 (3.3 V output) Example: TCR2BE33 (3.3 V output)

3 M 3

TCR2BF series, TCR2BE series

2011-06-06

3

Absolute Maximum Ratings (Ta = 25°C)

Characteristics Symbol Rating Unit

Input voltage VIN 6.0 V

Control voltage VCT -0.3 to 6.0 V

Output voltage VOUT -0.3 to VIN + 0.3 V

Output current IOUT 200 mA

200 (Note 1)

SMV

380 (Note 2)

150 (Note 1)

Power dissipation PD

ESV

320 (Note 3)

mW

Operation temperature range Topr −40 to 85 °C

Junction temperature Tj 150 °C

Storage temperature range Tstg −55 to150 °C

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly

even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute

maximum ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: Unit Rating

Note 2: Rating at mounting on a board

(Glass epoxy board dimension: 30 mm × 30 mm, Copper area: 50 mm2)

Note 3: Rating at mounting on a board

(Glass epoxy board dimension: 30 mm × 30 mm, Copper area: 20 mm2)

TCR2BF series, TCR2BE series

2011-06-06

4

Electrical Characteristics

(Unless otherwise specified,

VIN = VOUT + 1 V, IOUT = 50 mA, CIN = 0.1 μF, C OUT = 1.0 μF, Tj = 25°C)

Characteristics Symbol Test Condition Min Typ. Max Unit

VOUT ≦ 1.4 V -30 ⎯ +30 mV

Output voltage VOUT ⎯

1.5V ≦ VOUT -2 ⎯ +2 %

Line regulation Reg･line VOUT + 0.5 V

<

=

VIN

<

=

6 V,

IOUT = 1 mA ⎯ 1 15 mV

Load regulation Reg･load 1 mA

<

=

IOUT

<

=

150 mA ⎯ 10 30 mV

Quiescent current IB IOUT = 0 mA ⎯ 40 75 μA

Stand-by current IB (OFF) V

CT = 0 V ⎯ 0.1 1.0 μA

Dropout voltage VIN-VOUT

Please refer to the Dropout voltage table

Temperature coefficient TCVO −40°C

<

=

Topr

<

=

85°C ⎯ 100 ⎯ ppm/°C

Output noise voltage VNO VIN = VOUT + 1 V, IOUT = 10 mA,

10 Hz

<

=

f

<

=

100 kHz, Ta = 25°C (Note 4) ⎯ 50 ⎯ μVrms

VOUT : 1.0V 1.55 ⎯ 6.0

VOUT : 1.05V to 1.1V VOUT +

0.50 V ⎯ 6.0

VOUT : 1.15V to 1.2V 1.58 ⎯ 6.0

VOUT : 1.25V 1.59 ⎯ 6.0

VOUT : 1.3V 1.63 ⎯ 6.0

VOUT : 1.4V 1.68 ⎯ 6.0

VOUT : 1.5V to 1.75V VOUT

+0.25 V ⎯ 6.0

VOUT : 1.8V to 2.4V VOUT

+0.20 V ⎯ 6.0

Input voltage VIN ⎯

VOUT : 2.5V to 5.0V V

OUT

+0.15 V ⎯ 6.0

V

Ripple rejection ratio R.R.

VIN = VOUT + 1 V, IOUT = 10 mA,

f = 1 kHz, VRipple = 500 mVp-p,

Ta = 25°C

⎯ 70 ⎯ dB

Control voltage (ON) VCT (ON) ⎯ 1.1 ⎯ 6.0 V

Control voltage (OFF) VCT (OFF) ⎯ 0 ⎯ 0.4 V

Note 4: The 2.8V output product.

TCR2BF series, TCR2BE series

2011-06-06

5

Dropout Voltage

(IOUT = 50 mA, CIN = 0.1 μF, C OUT = 1.0 μF, Tj = 25°C)

Output voltage Symbol Min Typ. Max Unit

VOUT : 1.0V ⎯ 350 550

VOUT : 1.05V ⎯ 340 500

VOUT : 1.1V ⎯ 310 500

VOUT : 1.15V ⎯ 290 430

VOUT : 1.2V ⎯ 260 380

VOUT : 1.25V ⎯ 250 340

VOUT : 1.3V ⎯ 230 330

VOUT : 1.4V ⎯ 190 280

VOUT : 1.5V to 1.75V ⎯ 160 250

VOUT : 1.8V to 2.4V ⎯ 130 200

VOUT : 2.5V to 5.0V

VIN-VOUT

⎯ 100 150

mV

TCR2BF series, TCR2BE series

2011-06-06

6

Application Note

1. Recommended Application Circuit

The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor at

VOUT and VIN pins for stable input/output operation. (Ceramic capacitors can be used).

2. Power Dissipation

Power dissipation is measured on the board shown below.

Testing Board of Thermal Resistance

CONTROL pin

connection Operation

HIGH ON

LOW OFF

OPEN OFF

Ambient temperature Ta (°C)

PD – Ta (SMV)

Power dissipation PD (mW)

−40

0

0 40 120 80

100

200

300

400

① Board dimension 30 mm x 30 mm,

t = 0.8 mm Copper area 50 mm2,

mounted on Glass Epoxy Board

② Unit Rating

②

①

C

OU

T

VIN

V

OU

T

CONTROL

GND

CIN

NC

SM

V

ES

V

NC

CONTROL

GND V

IN

C

IN

C

OUT

VOUT

Ambient temperature Ta (°C)

PD – Ta (ESV)

Power dissipation PD (mW)

−40

0

0 40 120 80

100

200

300

400

①

②

① Board dimension 30 mm x 30 mm,

t = 0.8 mm Copper area 20 mm2,

mounted on Glass Epoxy Board

② Unit Rating

*Board material: Glass Epoxy

Board dimension: 30 mm × 30 mm

Copper area: 20 mm2, t = 0.8 mm

*Board material: Glass Epoxy

Board dimension: 30 mm × 30 mm

Copper area: 50 mm2、t = 0.8 mm

VOUT

GND

VIN

1.0 μF 0.1 μF

⎧

CONTROL

NC

●SMV ●ESV

VOUT

GND VIN

1.0 μF

0.1 μF

CONTROL

NC

TCR2BF series, TCR2BE series

2011-06-06

7

Attention in Use

● Output Capacitors

Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be

unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba

recommend the ESR of ceramic capacitor is under 10 Ω.

● Mounting

The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.

For stable power supply, output capacitor need to mount near IC as much as possible. Also GND pattern need to

be large and make the wire impedance small as possible.

● Permissible Loss

Please have enough design patterns for expected maximum permissible loss. And under consideration of

surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for

maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent.

● Overcurrent Protection Circuit

Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising

device operation. If output pins and GND pins are shorted out, these products might be break down.

In use of these products, please read through and understand dissipation idea for absolute maximum ratings from

the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum

ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.

TCR2BF series, TCR2BE series

2011-06-06

8

Representative Typical Characteristics

1) Output Voltage vs. Input Voltage

2) Output Voltage vs. Output Current

VOUT=1.0V

Output voltage VOUT (V)

0.9

1.0

1.1

VIN = 2.0 V,

CIN = 0.1 μF, COUT = 1 μF

0 60 100 200

Output current IOUT (mA)

20 40 80 120 140 160 180

VOUT=1.8V

Output current IOUT (mA)

Output voltage VOUT (V)

1.7

1.8

1.9

VIN = 2.8V,

CIN = 0.1 μF, C OUT = 1 μF

0 60 100 200 20 40 80 120 140 160 180

VOUT=1.0V

Input voltage VIN (V)

Output voltage VOUT (V)

0 1 4 6

0

1.5

2.0

0.5

1.0

CIN = 0.1 μF, C OUT = 1 μF

2 3 5

IOUT = 10mA

IOUT = 50mA

IOUT = 150mA

Input voltage VIN (V)

Output voltage VOUT (V)

0 1 4 6

0

3.0

4.0

1.0

2.0

CIN = 0.1 μF, C OUT = 1 μF

2 3 5

VOUT=1.8V

IOUT = 10mA

IOUT = 50mA

IOUT = 150mA

Input voltage VIN (V)

Output voltage VOUT (V)

0 1 4 6

0

3.0

4.0

1.0

2.0

CIN = 0.1 μF, C OUT = 1 μF

2 3 5

VOUT=3.0V

IOUT = 10mA

IOUT = 50mA

IOUT = 150mA

TCR2BF series, TCR2BE series

2011-06-06

9

3) Output Voltage vs. Ambient Temperature

VOUT=3.0V

Output current IOUT (mA)

Output voltage VOUT (V)

2.9

3.0

3.1

VIN = 4.0V,

CIN = 0.1 μF, C OUT = 1 μF

0 60 100 200 20 40 80 120 140 160 180

VOUT=1.8V

−50

1.7 −25 0 25 75 50

1.75

1.8

1.85

1.9

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

I

OUT = 50mA

100

Ambient temperature Ta (°C)

Output voltage VOUT (V)

VOUT=1.0V

−50

0.9 −25 0 25 75 50

0.95

1.0

1.05

1.1

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

100

Ambient temperature Ta (°C)

Output voltage VOUT (V)

Ambient temperature Ta (°C)

VOUT=3.0V

−50

2.9 −25 0 25 75 50

2.95

3.0

3.05

3.1

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

100

Output voltage VOUT (V)

TCR2BF series, TCR2BE series

2011-06-06

10

4) Dropout Voltage vs. Output Current

5) Quiescent Current vs. Input Voltage

VOUT=1.8V

Dropout voltage VIN - VOUT (mV)

0

100

200

300

400

0 40 100 200

Output current IOUT (mA)

80 180 120 140 160 60 20

500 CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.0V

Dropout voltage VIN - VOUT (mV)

0

200

400

600

800

0 40 100 200

Output current IOUT (mA)

80 180 120 140 160 60 20

1000 CIN = 0.1 μF, C OUT = 1 μF

VOUT=2.5V

Dropout voltage VIN - VOUT (mV)

0

100

200

300

400

0 40 100 200

Output current IOUT (mA)

80 180 120 140 160 60 20

500 CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.0V

Quiescent current IB (μA)

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

60

120

0

1 4 6 2 3 5

Input voltage VIN (V)

0

20

40

80

100

VOUT=1.8V

Quiescent current IB (μA)

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

60

120

0

1 4 6

2 3 5

Input voltage VIN (V)

0

20

40

80

100

TCR2BF series, TCR2BE series

2011-06-06

11

6) Quiescent Current vs.Ambient Temperature

VOUT=1.0V

Quiescent current IB (μA)

Ambient temperature Ta (°C)

−50 −25 0 25 100 75 50

0

50

100

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1μF,

IOUT = 0mA

Quiescent current IB (μA)

VOUT=1.8V

Ambient temperature Ta (°C)

−50 −25 0 25 100 75 50

0

50

100

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1μF,

IOUT = 0mA

Quiescent current IB (μA)

VOUT=3.0V

Ambient temperature Ta (°C)

−50 −25 0 25 100 75 50

0

50

100

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1μF,

IOUT = 0mA

VOUT=3.0V

Quiescent current IB (μA)

CIN = 0.1 μF, COUT = 1 μF

IOUT = 0mA

90

180

0

1 4 6 2 3 5

Input voltage VIN (V)

0

30

60

120

150

TCR2BF series, TCR2BE series

2011-06-06

12

7) Overcurrent protection characteristics (Overcurrent protection characteristic does not assure for the suppression of

uprising device operation. We recommend proper dissipation ratings for maximum permissible loss.)

8) Ripple Rejection Ratio vs. Frequency

Output current IOUT (mA)

VOUT=3.0V

Output voltage VOUT (V)

0

5.0

0 100 400 600

VIN = 4.0 V

200 300 500

1.0

VIN = 6.0 V

4.0

3.0

2.0

Pulse width = 1 ms

VOUT=1.0V

Output voltage VOUT (V)

0

2.0

0 100 400 600 200 300 500

1.0

Output current IOUT (mA)

Pulse width = 1 ms

VIN = 6.0 V

VIN =2.0V

VOUT=1.8V

Output voltage VOUT (V)

0

2.5

0 100 400 600

VIN = 2.8 V

200 300 500

1.0

VIN

=

6.0 V

Output current IOUT (mA)

Pulse width = 1 ms

0.5

1.5

2.0

VOUT=3.0V

Frequency f (Hz)

Ripple rejection ratio (dB)

0

10 100 1 k 10 k 100 k 300 k

10

20

30

40

50

60

70

80

VIN = 4.0 V ,Vripple = 500 mVp−p

CIN = none, COUT = 1μF

IOUT = 10 mA, Ta = 25°C

90

TCR2BF series, TCR2BE series

2011-06-06

13

9) Control Transient Response (Auto-Discharge)

VOUT=3.0V (Turn on waveform)

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50 mA

Control voltage

VCT (ON) (1V/div)

Output voltage

VOUT (ON) (1V/div)

Time t ( 100 μs/div )

VOUT=1.8V (Turn on waveform)

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50 mA

Control voltage

VCT (ON) (1V/div)

Output voltage

VOUT (ON) (1V/div)

VOUT=1.0V (Turn on waveform)

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50 mA

Control voltage

VCT (ON) (1V/div)

Output voltage

VOUT (ON) (1V/div)

Time t ( 100 μs/div )

VOUT=1.0V (Turn off waveform)

Control voltage

VCT (OFF) (1V/div)

Output voltage

VOUT (OFF) (1V/div)

Time t ( 50 μs/div )

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 1mA

IOUT = 50mA

VOUT=1.8V (Turn off waveform)

Control voltage

VCT (OFF) (1V/div)

Output voltage

VOUT (OFF) (1V/div)

Time t ( 50 μs/div )

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

IOUT = 1mA

VOUT=3.0 V (Turn off waveform)

Control voltage

VCT (OFF) (1V/div)

Output voltage

VOUT (OFF) (1V/div)

Time t ( 50 μs/div )

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

IOUT = 50mA

IOUT = 1mA

TCR2BF series, TCR2BE series

2011-06-06

14

10) Load Transient Response

VOUT=1.0V

(IOUT = 30mA to 1mA)

Output current

IOUT (20mA/div)

Output voltage

⊿ V

OUT (50mV/div)

Time t ( 100 μs/div )

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.0V

(IOUT = 1mA to 30mA)

Output current

IOUT (20mA/div)

Output voltage

⊿ V

OUT (50mV/div)

Time t (100 μs/div )

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.0V

(IOUT = 100mA to 50mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (50mA/div)

Time t ( 100 μs/div )

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.0V

(IOUT = 50mA to 100mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (50mA/div)

Time t ( 100 μs/div )

VIN = 2.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.8V

(IOUT = 1mA to 30mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (20mA/div)

Time t ( 100 μs/div )

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.8V

(IOUT =30mA to 1mA)

Output current

IOUT (20mA/div)

Output voltage

⊿ V

OUT (50mV/div)

Time t ( 100 μs/div )

VIN = 2.8 V,

CIN = 0.1 μF, COUT = 1 μF

TCR2BF series, TCR2BE series

2011-06-06

15

VOUT=3.0V

(IOUT = 1mA to 30mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (20mA/div)

Time t ( 100 μs/div )

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=3.0V

(IOUT = 50mA to 100mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (50mA/div)

Time t ( 100 μs/div )

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=3.0V

(IOUT = 100mA to 50mA)

Output current

IOUT (50mA/div)

Output voltage

⊿ V

OUT (50mV/div)

Time t ( 100 μs/div )

VIN = 4.0 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.8V

(IOUT = 50mA to 100mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (50mA/div)

Time t ( 100 μs/div )

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=1.8V

(IOUT = 100mA to 50mA)

Output voltage

⊿ V

OUT (50mV/div)

Output current

IOUT (50mA/div)

Time t ( 100 μs/div )

VIN = 2.8 V,

CIN = 0.1 μF, C OUT = 1 μF

VOUT=3.0V

(IOUT =30mA to 1mA)

Output current

IOUT (20mA/div)

Output voltage

⊿ V

OUT (50mV/div)

Time t ( 100 μs/div )

VIN = 4.0 V,

CIN = 0.1 μF, COUT = 1 μF

TCR2BF series, TCR2BE series

2011-06-06

16

Package Dimensions

SMV (SOT-25)(SC-74A) Unit: mm

Weight : 16 mg (typ.)

TCR2BF series, TCR2BE series

2011-06-06

17

Package Dimensions

ESV (SOT-553) Unit: mm

Weight: 3.0 mg (typ.)

TCR2BF series, TCR2BE series

2011-06-06

18

RESTRICTIONS ON PRODUCT USE

• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.