INDUCTORS
MLG0603S 0603 [0201 inch]*
MLG1005S 1005 [0402 inch]
MLG1608 1608 [0603 inch]
* Dimensions Code JIS[EIA]
March 2014
Inductors for High Frequency
Multilayer Ceramic
MLG series
(2/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
Inductors for High Frequency Circuits
Multilayer Ceramic
FEATURES
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for High-
frequency.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
The Storage temperature range is for after the circuit board is mounted.
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Overview of the MLG Series
MLG 0603 S 0N3 S T 000
Series name L×W×H Dimensions Product internal
code
Inductance Inductance
tolerance Packaging style Internal code
(mm) (nH)
0603 0.6×0.3×0.3 B 1N1 1.1 B ±0.1nH T Taping 000
1005 1.0×0.5×0.5 S 11N 11 C ±0.2nH
1608 1.6×0.8×0.8 R10 100 S ±0.3nH
1R0 1000 D ±0.5nH
H±3%
J±5%
Type
Temperature range
Package quantity Individual weight
Operating
temperature
Storage
temperature
（°C） （°C）(pieces/reel) （mg）
MLG0603S –55 to +125 –55 to +125 15000 0.2
MLG1005S –55 to +125 –55 to +125 10000 1
MLG1608 –55 to +125 –55 to +125 4000 4
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
Overview of the MLG Series
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s max.
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(5/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries
MLG0603S Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
0.6±0.03
0.15±0.05 0.15±0.05
0.30±0.03 0.30±0.03
Dimensions in mm
0.3
0.3 0.250.25 Dimensions in mm
(6/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.
(nH) Tolerance min. typ. max. typ.
0.3 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N3BT000
0.3 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N3CT000
0.4 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N4BT000
0.4 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N4CT000
0.5 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N5BT000
0.5 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N5CT000
0.6 ±0.1nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N6BT000
0.6 ±0.2nH —100 10.0 20up 0.1 0.02 600 MLG0603S0N6CT000
0.7 ±0.1nH —100 10.0 16.3 0.1 0.02 600 MLG0603S0N7BT000
0.7 ±0.2nH —100 10.0 16.3 0.1 0.02 600 MLG0603S0N7CT000
0.8 ±0.1nH —100 10.0 16.1 0.1 0.03 600 MLG0603S0N8BT000
0.8 ±0.2nH —100 10.0 16.1 0.1 0.03 600 MLG0603S0N8CT000
0.9 ±0.1nH —100 10.0 13.8 0.1 0.03 600 MLG0603S0N9BT000
0.9 ±0.2nH —100 10.0 13.8 0.1 0.03 600 MLG0603S0N9CT000
1.0 ±0.1nH 4 100 10.0 14.4 0.1 0.04 600 MLG0603S1N0BT000
1.0 ±0.2nH 4100 10.0 14.4 0.1 0.04 600 MLG0603S1N0CT000
1.0 ±0.3nH 4 100 10.0 14.4 0.1 0.04 600 MLG0603S1N0ST000
1.1 ±0.1nH 4100 10.0 13.6 0.15 0.04 550 MLG0603S1N1BT000
1.1 ±0.2nH 4 100 10.0 13.6 0.15 0.04 550 MLG0603S1N1CT000
1.1 ±0.3nH 4100 10.0 13.6 0.15 0.04 550 MLG0603S1N1ST000
1.2 ±0.1nH 4 100 10.0 12.3 0.15 0.06 550 MLG0603S1N2BT000
1.2 ±0.2nH 4100 10.0 12.3 0.15 0.06 550 MLG0603S1N2CT000
1.2 ±0.3nH 4 100 10.0 12.3 0.15 0.06 550 MLG0603S1N2ST000
1.3 ±0.1nH 4100 9.0 11.4 0.15 0.07 550 MLG0603S1N3BT000
1.3 ±0.2nH 4 100 9.0 11.4 0.15 0.07 550 MLG0603S1N3CT000
1.3 ±0.3nH 4100 9.0 11.4 0.15 0.07 550 MLG0603S1N3ST000
1.5 ±0.1nH 4 100 9.0 10.4 0.15 0.07 550 MLG0603S1N5BT000
1.5 ±0.2nH 4100 9.0 10.4 0.15 0.07 550 MLG0603S1N5CT000
1.5 ±0.3nH 4 100 9.0 10.4 0.15 0.07 550 MLG0603S1N5ST000
1.6 ±0.1nH 4100 9.0 11.5 0.2 0.09 500 MLG0603S1N6BT000
1.6 ±0.2nH 4 100 9.0 11.5 0.2 0.09 500 MLG0603S1N6CT000
1.6 ±0.3nH 4100 9.0 11.5 0.2 0.09 500 MLG0603S1N6ST000
1.8 ±0.1nH 4 100 8.5 10.0 0.2 0.12 500 MLG0603S1N8BT000
1.8 ±0.2nH 4100 8.5 10.0 0.2 0.12 500 MLG0603S1N8CT000
1.8 ±0.3nH 4 100 8.5 10.0 0.2 0.12 500 MLG0603S1N8ST000
2.0 ±0.1nH 4100 8.2 9.8 0.25 0.14 400 MLG0603S2N0BT000
2.0 ±0.2nH 4 100 8.2 9.8 0.25 0.14 400 MLG0603S2N0CT000
2.0 ±0.3nH 4100 8.2 9.8 0.25 0.14 400 MLG0603S2N0ST000
2.2 ±0.1nH 4 100 8.0 8.9 0.25 0.14 400 MLG0603S2N2BT000
2.2 ±0.2nH 4100 8.0 8.9 0.25 0.14 400 MLG0603S2N2CT000
2.2 ±0.3nH 4 100 8.0 8.9 0.25 0.14 400 MLG0603S2N2ST000
2.4 ±0.1nH 4100 8.0 9.2 0.25 0.15 300 MLG0603S2N4BT000
2.4 ±0.2nH 4 100 8.0 9.2 0.25 0.15 300 MLG0603S2N4CT000
2.4 ±0.3nH 4100 8.0 9.2 0.25 0.15 300 MLG0603S2N4ST000
Measurement item Product No. Manufacturer
L, Q 4291B+16197A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(7/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.
(nH) Tolerance min. typ. max. typ.
2.7 ±0.1nH 4 100 6.5 8.1 0.25 0.15 300 MLG0603S2N7BT000
2.7 ±0.2nH 4100 6.5 8.1 0.25 0.15 300 MLG0603S2N7CT000
2.7 ±0.3nH 4 100 6.5 8.1 0.25 0.15 300 MLG0603S2N7ST000
3.0 ±0.1nH 4100 6.2 7.8 0.3 0.20 300 MLG0603S3N0BT000
3.0 ±0.2nH 4 100 6.2 7.8 0.3 0.20 300 MLG0603S3N0CT000
3.0 ±0.3nH 4100 6.2 7.8 0.3 0.20 300 MLG0603S3N0ST000
3.3 ±0.1nH 4 100 5.8 7.0 0.35 0.23 300 MLG0603S3N3BT000
3.3 ±0.2nH 4100 5.8 7.0 0.35 0.23 300 MLG0603S3N3CT000
3.3 ±0.3nH 4 100 5.8 7.0 0.35 0.23 300 MLG0603S3N3ST000
3.6 ±0.1nH 4100 5.5 6.9 0.35 0.22 300 MLG0603S3N6BT000
3.6 ±0.2nH 4 100 5.5 6.9 0.35 0.22 300 MLG0603S3N6CT000
3.6 ±0.3nH 4100 5.5 6.9 0.35 0.22 300 MLG0603S3N6ST000
3.9 ±0.1nH 5 100 5.0 6.6 0.4 0.27 300 MLG0603S3N9BT000
3.9 ±0.2nH 5100 5.0 6.6 0.4 0.27 300 MLG0603S3N9CT000
3.9 ±0.3nH 5 100 5.0 6.6 0.4 0.27 300 MLG0603S3N9ST000
4.3 ±3% 5100 5.0 6.4 0.4 0.27 300 MLG0603S4N3HT000
4.3 ±0.3nH 5 100 5.0 6.4 0.4 0.27 300 MLG0603S4N3ST000
4.7 ±0.3nH 5100 4.5 5.4 0.45 0.28 300 MLG0603S4N7ST000
4.7 ±3% 5 100 4.5 5.4 0.45 0.28 300 MLG0603S4N7HT000
5.1 ±3% 5100 4.5 5.5 0.45 0.23 250 MLG0603S5N1HT000
5.1 ±0.3nH 5 100 4.5 5.5 0.45 0.23 250 MLG0603S5N1ST000
5.6 ±0.3nH 5100 4.2 5.3 0.5 0.31 250 MLG0603S5N6ST000
5.6 ±3% 5 100 4.2 5.3 0.5 0.31 250 MLG0603S5N6HT000
6.2 ±0.3nH 5100 4.2 5.1 0.55 0.32 250 MLG0603S6N2ST000
6.2 ±3% 5 100 4.2 5.1 0.55 0.32 250 MLG0603S6N2HT000
6.8 ±3% 5100 3.6 4.4 0.6 0.32 250 MLG0603S6N8HT000
6.8 ±5% 5 100 3.6 4.4 0.6 0.32 250 MLG0603S6N8JT000
7.5 ±3% 5100 4.2 5.3 0.7 0.43 200 MLG0603S7N5HT000
7.5 ±5% 5 100 4.2 5.3 0.7 0.43 200 MLG0603S7N5JT000
8.2 ±3% 5100 3.8 4.5 0.7 0.45 200 MLG0603S8N2HT000
8.2 ±5% 5 100 3.8 4.5 0.7 0.45 200 MLG0603S8N2JT000
9.1 ±3% 5100 3.4 4.9 0.8 0.51 200 MLG0603S9N1HT000
9.1 ±5% 5 100 3.4 4.9 0.8 0.51 200 MLG0603S9N1JT000
10 ±3% 5100 3.2 4.1 0.8 0.53 200 MLG0603S10NHT000
10 ±5% 5 100 3.2 4.1 0.8 0.53 200 MLG0603S10NJT000
11 ±3% 6100 3.0 3.7 0.8 0.53 200 MLG0603S11NHT000
11 ±5% 6 100 3.0 3.7 0.8 0.53 200 MLG0603S11NJT000
12 ±3% 6100 2.8 3.6 0.9 0.63 180 MLG0603S12NHT000
12 ±5% 6 100 2.8 3.6 0.9 0.63 180 MLG0603S12NJT000
13 ±3% 6100 2.7 3.4 0.9 0.60 180 MLG0603S13NHT000
13 ±5% 6 100 2.7 3.4 0.9 0.60 180 MLG0603S13NJT000
15 ±3% 6100 2.5 3.3 1.1 0.69 180 MLG0603S15NHT000
15 ±5% 6 100 2.5 3.3 1.1 0.69 180 MLG0603S15NJT000
16 ±3% 6100 2.3 3.0 1.1 0.70 180 MLG0603S16NHT000
16 ±5% 6 100 2.3 3.0 1.1 0.70 180 MLG0603S16NJT000
Measurement item Product No. Manufacturer
L, Q 4291B+16197A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(8/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.
(nH) Tolerance min. typ. max. typ.
18 ±3% 6 100 2.2 2.8 1.2 0.78 150 MLG0603S18NHT000
18 ±5% 6100 2.2 2.8 1.2 0.78 150 MLG0603S18NJT000
20 ±3% 6 100 2.1 2.6 1.2 0.75 150 MLG0603S20NHT000
20 ±5% 6100 2.1 2.6 1.2 0.75 150 MLG0603S20NJT000
22 ±3% 6 100 2.0 2.5 1.2 0.88 150 MLG0603S22NHT000
22 ±5% 6100 2.0 2.5 1.2 0.88 150 MLG0603S22NJT000
24 ±3% 6 100 1.9 2.3 1.3 0.90 150 MLG0603S24NHT000
24 ±5% 6100 1.9 2.3 1.3 0.90 150 MLG0603S24NJT000
27 ±3% 6 100 1.8 2.2 1.5 1.00 100 MLG0603S27NHT000
27 ±5% 6100 1.8 2.2 1.5 1.00 100 MLG0603S27NJT000
30 ±3% 6 100 1.6 2.0 1.6 0.95 100 MLG0603S30NHT000
30 ±5% 6100 1.6 2.0 1.6 0.95 100 MLG0603S30NJT000
33 ±3% 6 100 1.6 2.0 1.8 1.20 100 MLG0603S33NHT000
33 ±5% 6100 1.6 2.0 1.8 1.20 100 MLG0603S33NJT000
36 ±3% 6 100 1.5 1.8 2.0 1.68 50 MLG0603S36NHT000
36 ±5% 6100 1.5 1.8 2.0 1.68 50 MLG0603S36NJT000
39 ±3% 6 100 1.4 1.6 2.0 1.40 50 MLG0603S39NHT000
39 ±5% 6100 1.4 1.6 2.0 1.40 50 MLG0603S39NJT000
43 ±3% 6 100 1.3 1.6 2.2 1.91 50 MLG0603S43NHT000
43 ±5% 6100 1.3 1.6 2.2 1.91 50 MLG0603S43NJT000
47 ±3% 6 100 1.3 1.5 2.2 1.48 50 MLG0603S47NHT000
47 ±5% 6100 1.3 1.5 2.2 1.48 50 MLG0603S47NJT000
51 ±3% 5 100 1.2 1.5 2.8 1.98 50 MLG0603S51NHT000
51 ±5% 5100 1.2 1.5 2.8 1.98 50 MLG0603S51NJT000
56 ±3% 5 100 1.2 1.4 3.2 2.11 50 MLG0603S56NHT000
56 ±5% 5100 1.2 1.4 3.2 2.11 50 MLG0603S56NJT000
62 ±3% 5 100 1.1 1.3 3.3 2.22 50 MLG0603S62NHT000
62 ±5% 5100 1.1 1.3 3.3 2.22 50 MLG0603S62NJT000
68 ±3% 5 100 1.05 1.24 3.5 2.40 50 MLG0603S68NHT000
68 ±5% 5100 1.05 1.24 3.5 2.40 50 MLG0603S68NJT000
75 ±3% 5 100 0.95 1.17 3.8 2.67 50 MLG0603S75NHT000
75 ±5% 5100 0.95 1.17 3.8 2.67 50 MLG0603S75NJT000
82 ±3% 5 100 0.90 1.08 4.0 2.80 50 MLG0603S82NHT000
82 ±5% 5100 0.90 1.08 4.0 2.80 50 MLG0603S82NJT000
91 ±3% 5 100 0.77 0.94 4.3 2.97 50 MLG0603S91NHT000
91 ±5% 5100 0.77 0.94 4.3 2.97 50 MLG0603S91NJT000
100 ±3% 5 100 0.77 0.94 4.5 3.13 50 MLG0603SR10HT000
100 ±5% 5100 0.77 0.94 4.5 3.13 50 MLG0603SR10JT000
110 ±3% 5 100 0.77 0.94 6.5 5.24 50 MLG0603SR11HT000
110 ±5% 5100 0.77 0.94 6.5 5.24 50 MLG0603SR11JT000
120 ±3% 5 100 0.70 0.88 7.0 5.53 50 MLG0603SR12HT000
120 ±5% 5100 0.70 0.88 7.0 5.53 50 MLG0603SR12JT000
130 ±3% 5 100 0.67 0.84 7.3 5.68 50 MLG0603SR13HT000
130 ±5% 5100 0.67 0.84 7.3 5.68 50 MLG0603SR13JT000
Measurement item Product No. Manufacturer
L, Q 4291B+16197A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(9/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.
(nH) Tolerance min. typ. max. typ.
150 ±3% 5 100 0.64 0.77 8.0 6.24 50 MLG0603SR15HT000
150 ±5% 5100 0.64 0.77 8.0 6.24 50 MLG0603SR15JT000
160 ±3% 5 100 0.60 0.73 8.3 6.67 50 MLG0603SR16HT000
160 ±5% 5100 0.60 0.73 8.3 6.67 50 MLG0603SR16JT000
180 ±3% 5 100 0.56 0.68 8.5 6.99 50 MLG0603SR18HT000
180 ±5% 5100 0.56 0.68 8.5 6.99 50 MLG0603SR18JT000
Measurement item Product No. Manufacturer
L, Q 4291B+16197A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(10/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
0.3 0.3 0.3 0.3 0.3 14min. 18min. 29min. 32min. 35min. MLG0603S0N3CT000
0.4 0.4 0.4 0.4 0.4 14min. 18min. 29min. 32min. 35min. MLG0603S0N4BT000
0.4 0.4 0.4 0.4 0.4 14min. 18min. 29min. 32min. 35min. MLG0603S0N4CT000
0.5 0.5 0.5 0.5 0.5 14 18 29 32 35 MLG0603S0N5BT000
0.5 0.5 0.5 0.5 0.5 14 18 29 32 35 MLG0603S0N5CT000
0.6 0.6 0.5 0.5 0.5 16 20 33 34 39 MLG0603S0N6BT000
0.6 0.6 0.5 0.5 0.5 16 20 33 34 39 MLG0603S0N6CT000
0.7 0.6 0.6 0.6 0.6 16 21 33 35 39 MLG0603S0N7BT000
0.7 0.6 0.6 0.6 0.6 16 21 33 35 39 MLG0603S0N7CT000
0.7 0.7 0.7 0.7 0.7 15 20 32 34 38 MLG0603S0N8BT000
0.7 0.7 0.7 0.7 0.7 15 20 32 34 38 MLG0603S0N8CT000
0.8 0.8 0.8 0.8 0.8 15 19 30 32 35 MLG0603S0N9BT000
0.8 0.8 0.8 0.8 0.8 15 19 30 32 35 MLG0603S0N9CT000
0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0BT000
0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0CT000
0.9 0.9 0.9 0.9 0.9 14 18 29 30 34 MLG0603S1N0ST000
1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1BT000
1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1CT000
1.0 1.0 1.0 1.0 1.0 14 19 29 31 34 MLG0603S1N1ST000
1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2BT000
1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2CT000
1.1 1.1 1.1 1.1 1.1 14 18 29 30 34 MLG0603S1N2ST000
1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3BT000
1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3CT000
1.2 1.2 1.2 1.2 1.2 14 18 29 30 33 MLG0603S1N3ST000
1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5BT000
1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5CT000
1.4 1.4 1.4 1.4 1.4 15 19 29 30 34 MLG0603S1N5ST000
1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6BT000
1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6CT000
1.5 1.5 1.5 1.5 1.5 14 18 29 30 33 MLG0603S1N6ST000
1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8BT000
1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8CT000
1.7 1.7 1.7 1.7 1.7 15 19 29 30 33 MLG0603S1N8ST000
1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0BT000
1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0CT000
1.9 1.9 1.9 1.9 1.9 14 18 28 29 32 MLG0603S2N0ST000
2.1 2 2.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2BT000
2.1 22.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2CT000
2.1 2 2.1 2.1 2.1 14 18 27 28 31 MLG0603S2N2ST000
2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4BT000
2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4CT000
2.2 2.2 2.2 2.3 2.3 14 18 27 29 32 MLG0603S2N4ST000
2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7BT000
2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7CT000
2.5 2.5 2.6 2.6 2.7 15 19 28 29 31 MLG0603S2N7ST000
Product No. Manufacturer
4291B+16197A Agilent Technologies
(11/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
2.8 2.8 2.9 2.9 315 19 29 31 33 MLG0603S3N0BT000
2.8 2.8 2.9 2.9 3 15 19 29 31 33 MLG0603S3N0CT000
2.8 2.8 2.9 2.9 315 19 29 31 33 MLG0603S3N0ST000
3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3BT000
3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3CT000
3.1 3.1 3.2 3.3 3.4 15 19 28 29 31 MLG0603S3N3ST000
3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6BT000
3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6CT000
3.4 3.4 3.5 3.6 3.7 14 18 26 27 29 MLG0603S3N6ST000
3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9BT000
3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9CT000
3.7 3.7 3.8 3.9 4.1 15 19 29 29 32 MLG0603S3N9ST000
4.1 4.1 4.3 4.4 4.6 14 18 27 27 29 MLG0603S4N3HT000
4.1 4.1 4.3 4.4 4.6 14 18 27 27 29 MLG0603S4N3ST000
4.4 4.4 4.8 4.9 5.2 15 20 28 29 30 MLG0603S4N7ST000
4.4 4.4 4.8 4.9 5.2 15 20 28 29 30 MLG0603S4N7HT000
4.8 4.8 5.1 5.3 5.6 14 18 25 26 27 MLG0603S5N1HT000
4.8 4.8 5.1 5.3 5.6 14 18 25 26 27 MLG0603S5N1ST000
5.3 5.3 5.7 5.9 6.4 16 20 27 28 29 MLG0603S5N6ST000
5.3 5.3 5.7 5.9 6.4 16 20 27 28 29 MLG0603S5N6HT000
5.9 5.9 6.5 6.8 7.5 15 18 25 25 26 MLG0603S6N2ST000
5.9 5.9 6.5 6.8 7.5 15 18 25 25 26 MLG0603S6N2HT000
6.4 6.5 7.4 7.8 8.7 15 19 26 26 25 MLG0603S6N8HT000
6.4 6.5 7.4 7.8 8.7 15 19 26 26 25 MLG0603S6N8JT000
7.1 7.1 7.8 88.7 14 18 25 26 26 MLG0603S7N5HT000
7.1 7.1 7.8 8 8.7 14 18 25 26 26 MLG0603S7N5JT000
7.8 7.8 8.8 9.3 10.4 15 18 24 24 24 MLG0603S8N2HT000
7.8 7.8 8.8 9.3 10.4 15 18 24 24 24 MLG0603S8N2JT000
8.6 8.6 9.8 10.3 11.5 14 17 22 22 22 MLG0603S9N1HT000
8.6 8.6 9.8 10.3 11.5 14 17 22 22 22 MLG0603S9N1JT000
10 10 12 12 15 15 18 23 22 21 MLG0603S10NHT000
10 10 12 12 15 15 18 23 22 21 MLG0603S10NJT000
10 11 13 14 16 15 18 22 22 20 MLG0603S11NHT000
10 11 13 14 16 15 18 22 22 20 MLG0603S11NJT000
11 12 14 15 19 16 19 24 23 20 MLG0603S12NHT000
11 12 14 15 19 16 19 24 23 20 MLG0603S12NJT000
12 13 16 17 22 14 16 19 18 15 MLG0603S13NHT000
12 13 16 17 22 14 16 19 18 15 MLG0603S13NJT000
14 15 20 23 33 15 19 20 18 14 MLG0603S15NHT000
14 15 20 23 33 15 19 20 18 14 MLG0603S15NJT000
15 16 22 25 37 14 16 16 15 11 MLG0603S16NHT000
15 16 22 25 37 14 16 16 15 11 MLG0603S16NJT000
17 18 28 35 14 17 15 13 MLG0603S18NHT000
17 18 28 35 14 17 15 13 MLG0603S18NJT000
19 20 32 13 16 14 MLG0603S20NHT000
19 20 32 13 16 14 MLG0603S20NJT000
Product No. Manufacturer
4291B+16197A Agilent Technologies
(12/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
21 23 40 15 17 13 MLG0603S22NHT000
21 23 40 15 17 13 MLG0603S22NJT000
23 24 45 13 15 13 MLG0603S24NHT000
23 24 45 13 15 13 MLG0603S24NJT000
27 29 15 17 MLG0603S27NHT000
27 29 15 17 MLG0603S27NJT000
29 32 13 15 MLG0603S30NHT000
29 32 13 15 MLG0603S30NJT000
33 36 14 16 MLG0603S33NHT000
33 36 14 16 MLG0603S33NJT000
36 40 14 15 MLG0603S36NHT000
36 40 14 15 MLG0603S36NJT000
40 47 13 14 MLG0603S39NHT000
40 47 13 14 MLG0603S39NJT000
44 53 14 14 MLG0603S43NHT000
44 53 14 14 MLG0603S43NJT000
49 60 13 13 MLG0603S47NHT000
49 60 13 13 MLG0603S47NJT000
52 64 11 11 MLG0603S51NHT000
52 64 11 11 MLG0603S51NJT000
59 77 12 11 MLG0603S56NHT000
59 77 12 11 MLG0603S56NJT000
66 88 11 10 MLG0603S62NHT000
66 88 11 10 MLG0603S62NJT000
74 104 13 11 MLG0603S68NHT000
74 104 13 11 MLG0603S68NJT000
82 119 10 8MLG0603S75NHT000
82 119 10 8 MLG0603S75NJT000
96 161 12 8MLG0603S82NHT000
96 161 12 8 MLG0603S82NJT000
109 9MLG0603S91NHT000
109 9 MLG0603S91NJT000
129 11 MLG0603SR10HT000
129 11 MLG0603SR10JT000
134 10 MLG0603SR11HT000
134 10 MLG0603SR11JT000
156 9MLG0603SR12HT000
156 9 MLG0603SR12JT000
172 8MLG0603SR13HT000
172 8 MLG0603SR13JT000
223 7MLG0603SR15HT000
223 7 MLG0603SR15JT000
238 7MLG0603SR16HT000
238 7 MLG0603SR16JT000
318 6MLG0603SR18HT000
318 6 MLG0603SR18JT000
Product No. Manufacturer
4291B+16197A Agilent Technologies
(13/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
10 100 1000 10000
0
1000
100
10
1
Frequency(MHz)
Inductance(nH)
R18 R15
R12
R10
82N
68N
56N
47N 39N
33N
27N
22N 18N
15N
12N
10N
8N2
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
Product No. Manufacturer
E4991A +16197A Agilent Technologies
(14/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG0603S Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
0
Q
10 100 1000 10000
Frequency(MHz)
10
20
30
40
50
㻌
R18
68N
56N
47N
39N
33N
27N
22N
18N
15N
12N
10N
8N2
6N8
5N6
4N7
3N9
2N7
1N8
1N5
1N2
1N0
2N2
3N3
R12
R10
82N
R15
Product No. Manufacturer
E4991A +16197A Agilent Technologies
(15/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries
MLG1005S Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
1.00±0.05
0.25±0.10 0.25±0.10
0.50±0.05 0.50±0.05
Dimensions in mm
0.5
0.5 0.4 0.5
(16/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
 Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.*
(nH) Tolerance min. typ. max. typ.
0.3 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N3BT000
0.3 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N3CT000
0.4 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N4BT000
0.4 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N4CT000
0.5 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N5BT000
0.5 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N5CT000
0.6 ±0.1nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N6BT000
0.6 ±0.2nH —100 10.0 20up 0.10 0.01 1000 MLG1005S0N6CT000
0.7 ±0.1nH —100 10.0 18.7 0.10 0.02 1000 MLG1005S0N7BT000
0.7 ±0.2nH —100 10.0 18.7 0.10 0.02 1000 MLG1005S0N7CT000
0.8 ±0.1nH —100 10.0 16.4 0.10 0.02 1000 MLG1005S0N8BT000
0.8 ±0.2nH —100 10.0 16.4 0.10 0.02 1000 MLG1005S0N8CT000
0.9 ±0.1nH —100 10.0 17.7 0.10 0.04 1000 MLG1005S0N9BT000
0.9 ±0.2nH —100 10.0 17.7 0.10 0.04 1000 MLG1005S0N9CT000
1.0 ±0.1nH 7 100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0BT000
1.0 ±0.2nH 7100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0CT000
1.0 ±0.2nH 7 100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0CT000
1.1 ±0.1nH 7100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1BT000
1.1 ±0.2nH 7 100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1CT000
1.1 ±0.3nH 7100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1ST000
1.2 ±0.1nH 7 100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2BT000
1.2 ±0.2nH 7100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2CT000
1.2 ±0.3nH 7 100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2ST000
1.3 ±0.1nH 7100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3BT000
1.3 ±0.2nH 7 100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3CT000
1.3 ±0.3nH 7100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3ST000
1.5 ±0.1nH 7 100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5BT000
1.5 ±0.2nH 7100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5CT000
1.5 ±0.3nH 7 100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5ST000
1.6 ±0.1nH 7100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6BT000
1.6 ±0.2nH 7 100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6CT000
1.6 ±0.3nH 7100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6ST000
1.8 ±0.1nH 7 100 8.00 10.3 0.15 0.06 900 MLG1005S1N8BT000
1.8 ±0.2nH 7100 8.00 10.3 0.15 0.06 900 MLG1005S1N8CT000
1.8 ±0.3nH 7 100 8.00 10.3 0.15 0.06 900 MLG1005S1N8ST000
2.0 ±0.1nH 7100 7.50 9.3 0.15 0.07 900 MLG1005S2N0BT000
2.0 ±0.2nH 7 100 7.50 9.3 0.15 0.07 900 MLG1005S2N0CT000
2.0 ±0.3nH 7100 7.50 9.3 0.15 0.07 900 MLG1005S2N0ST000
2.2 ±0.1nH 7 100 7.00 8.6 0.15 0.08 900 MLG1005S2N2BT000
2.2 ±0.2nH 7100 7.00 8.6 0.15 0.08 900 MLG1005S2N2CT000
2.2 ±0.3nH 7 100 7.00 8.6 0.15 0.08 900 MLG1005S2N2ST000
2.4 ±0.1nH 7100 7.00 8.2 0.15 0.08 800 MLG1005S2N4BT000
2.4 ±0.2nH 7 100 7.00 8.2 0.15 0.08 800 MLG1005S2N4CT000
2.4 ±0.3nH 7100 7.00 8.2 0.15 0.08 800 MLG1005S2N4ST000
Measurement item Product No. Manufacturer
L, Q 4291B +16193A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(17/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
 Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.*
(nH) Tolerance min. typ. max. typ.
2.7 ±0.1nH 7 100 6.00 7.3 0.15 0.08 800 MLG1005S2N7BT000
2.7 ±0.2nH 7100 6.00 7.3 0.15 0.08 800 MLG1005S2N7CT000
2.7 ±0.3nH 7 100 6.00 7.3 0.15 0.08 800 MLG1005S2N7ST000
3.0 ±0.1nH 7100 5.50 6.8 0.20 0.09 800 MLG1005S3N0BT000
3.0 ±0.2nH 7 100 5.50 6.8 0.20 0.09 800 MLG1005S3N0CT000
3.0 ±0.3nH 7100 5.50 6.8 0.20 0.09 800 MLG1005S3N0ST000
3.3 ±0.1nH 8 100 5.00 6.1 0.20 0.09 800 MLG1005S3N3BT000
3.3 ±0.2nH 8100 5.00 6.1 0.20 0.09 800 MLG1005S3N3CT000
3.3 ±0.3nH 8 100 5.00 6.1 0.20 0.09 800 MLG1005S3N3ST000
3.6 ±0.1nH 8100 5.00 6.7 0.20 0.09 700 MLG1005S3N6BT000
3.6 ±0.2nH 8 100 5.00 6.7 0.20 0.09 700 MLG1005S3N6CT000
3.6 ±0.3nH 8100 5.00 6.7 0.20 0.09 700 MLG1005S3N6ST000
3.9 ±0.1nH 8 100 5.00 6.5 0.20 0.11 700 MLG1005S3N9BT000
3.9 ±0.2nH 8100 5.00 6.5 0.20 0.11 700 MLG1005S3N9CT000
3.9 ±0.3nH 8 100 5.00 6.5 0.20 0.11 700 MLG1005S3N9ST000
4.3 ±0.2nH 8100 4.50 6.0 0.20 0.11 700 MLG1005S4N3CT000
4.3 ±0.3nH 8 100 4.50 6.0 0.20 0.11 700 MLG1005S4N3ST000
4.7 ±0.2nH 8100 4.50 5.4 0.25 0.12 700 MLG1005S4N7CT000
4.7 ±0.3nH 8 100 4.50 5.4 0.25 0.12 700 MLG1005S4N7ST000
5.1 ±0.2nH 8100 4.00 5.0 0.25 0.13 600 MLG1005S5N1CT000
5.1 ±0.3nH 8 100 4.00 5.0 0.25 0.13 600 MLG1005S5N1ST000
5.6 ±0.2nH 8100 4.00 5.3 0.25 0.14 600 MLG1005S5N6CT000
5.6 ±0.3nH 8 100 4.00 5.3 0.25 0.14 600 MLG1005S5N6ST000
6.2 ±3% 8100 4.00 4.7 0.25 0.16 600 MLG1005S6N2HT000
6.2 ±0.3nH 8 100 4.00 4.7 0.25 0.16 600 MLG1005S6N2ST000
6.8 ±3% 8100 3.50 4.4 0.25 0.15 600 MLG1005S6N8HT000
7 ±5% 8 100 3.50 4.4 0.25 0.15 600 MLG1005S6N8JT000
7.5 ±3% 8100 3.00 4.1 0.25 0.15 500 MLG1005S7N5HT000
8 ±5% 8 100 3.00 4.1 0.25 0.15 500 MLG1005S7N5JT000
8.2 ±3% 8100 3.00 4.0 0.30 0.19 500 MLG1005S8N2HT000
8 ±5% 8 100 3.00 4.0 0.30 0.19 500 MLG1005S8N2JT000
9.1 ±3% 8100 3.00 3.8 0.30 0.20 500 MLG1005S9N1HT000
9 ±5% 8 100 3.00 3.8 0.30 0.20 500 MLG1005S9N1JT000
10.0 ±3% 8100 2.50 3.4 0.35 0.22 500 MLG1005S10NHT000
10 ±5% 8 100 2.50 3.4 0.35 0.22 500 MLG1005S10NJT000
11.0 ±3% 8100 2.50 3.5 0.40 0.28 400 MLG1005S11NHT000
11 ±5% 8 100 2.50 3.5 0.40 0.28 400 MLG1005S11NJT000
12.0 ±3% 8100 2.50 3.0 0.40 0.25 400 MLG1005S12NHT000
12 ±5% 8 100 2.50 3.0 0.40 0.25 400 MLG1005S12NJT000
13.0 ±3% 8100 2.40 2.9 0.50 0.26 400 MLG1005S13NHT000
13 ±5% 8 100 2.40 2.9 0.50 0.26 400 MLG1005S13NJT000
15 ±3% 8100 2.20 2.8 0.55 0.35 400 MLG1005S15NHT000
15 ±5% 8 100 2.20 2.8 0.55 0.35 400 MLG1005S15NJT000
16 ±3% 8100 2.10 2.7 0.55 0.32 400 MLG1005S16NHT000
16 ±5% 8 100 2.10 2.7 0.55 0.32 400 MLG1005S16NJT000
Measurement item Product No. Manufacturer
L, Q 4291B +16193A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(18/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
 Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.*
(nH) Tolerance min. typ. max. typ.
18 ±3% 8 100 2.00 2.5 0.60 0.40 350 MLG1005S18NHT000
18 ±5% 8100 2.00 2.5 0.60 0.40 350 MLG1005S18NJT000
20 ±3% 8 100 1.90 2.4 0.60 0.38 350 MLG1005S20NHT000
20 ±5% 8100 1.90 2.4 0.60 0.38 350 MLG1005S20NJT000
22 ±3% 8 100 1.70 2.2 0.70 0.46 350 MLG1005S22NHT000
22 ±5% 8100 1.70 2.2 0.70 0.46 350 MLG1005S22NJT000
24 ±3% 8 100 1.70 2.1 0.70 0.43 350 MLG1005S24NHT000
24 ±5% 8100 1.70 2.1 0.70 0.43 350 MLG1005S24NJT000
27 ±3% 8 100 1.60 2.0 0.80 0.53 300 MLG1005S27NHT000
27 ±5% 8100 1.60 2.0 0.80 0.53 300 MLG1005S27NJT000
30 ±3% 8 100 1.50 1.9 0.80 0.50 300 MLG1005S30NHT000
30 ±5% 8100 1.50 1.9 0.80 0.50 300 MLG1005S30NJT000
33 ±3% 8 100 1.40 1.8 0.90 0.59 300 MLG1005S33NHT000
33 ±5% 8100 1.40 1.8 0.90 0.59 300 MLG1005S33NJT000
36 ±3% 8 100 1.30 1.7 1.00 0.62 250 MLG1005S36NHT000
36 ±5% 8100 1.30 1.7 1.00 0.62 250 MLG1005S36NJT000
39 ±3% 8 100 1.20 1.6 1.00 0.65 250 MLG1005S39NHT000
39 ±5% 8100 1.20 1.6 1.00 0.65 250 MLG1005S39NJT000
43 ±3% 8 100 1.20 1.6 1.10 0.67 250 MLG1005S43NHT000
43 ±5% 8100 1.20 1.6 1.10 0.67 250 MLG1005S43NJT000
47 ±3% 8 100 1.10 1.4 1.20 0.75 250 MLG1005S47NHT000
47 ±5% 8100 1.10 1.4 1.20 0.75 250 MLG1005S47NJT000
51 ±3% 8 100 1.10 1.5 1.20 0.72 250 MLG1005S51NHT000
51 ±5% 8100 1.10 1.5 1.20 0.72 250 MLG1005S51NJT000
56 ±3% 8 100 1.00 1.3 1.30 0.83 200 MLG1005S56NHT000
56 ±5% 8100 1.00 1.3 1.30 0.83 200 MLG1005S56NJT000
62 ±3% 8 100 1.00 1.3 1.40 0.85 200 MLG1005S62NHT000
62 ±5% 8100 1.00 1.3 1.40 0.85 200 MLG1005S62NJT000
68 ±3% 8 100 0.80 1.1 1.50 0.87 200 MLG1005S68NHT000
68 ±5% 8100 0.80 1.1 1.50 0.87 200 MLG1005S68NJT000
75 ±3% 8 100 0.75 1.1 1.50 0.93 200 MLG1005S75NHT000
75 ±5% 8100 0.75 1.1 1.50 0.93 200 MLG1005S75NJT000
82 ±3% 8 100 0.70 1.0 1.60 1.01 200 MLG1005S82NHT000
82 ±5% 8100 0.70 1.0 1.60 1.01 200 MLG1005S82NJT000
91 ±3% 8 100 0.70 0.9 1.80 1.14 200 MLG1005S91NHT000
91 ±5% 8100 0.70 0.9 1.80 1.14 200 MLG1005S91NJT000
100 ±3% 8 100 0.70 0.9 2.00 1.37 200 MLG1005SR10HT000
100 ±5% 8100 0.70 0.9 2.00 1.37 200 MLG1005SR10JT000
110 ±3% 8 100 0.70 0.9 2.20 1.48 150 MLG1005SR11HT000
110 ±5% 8100 0.70 0.9 2.20 1.48 150 MLG1005SR11JT000
120 ±3% 8 100 0.60 0.8 2.20 1.48 150 MLG1005SR12HT000
120 ±5% 8100 0.60 0.8 2.20 1.48 150 MLG1005SR12JT000
130 ±3% 8 100 0.60 0.8 2.50 1.68 150 MLG1005SR13HT000
130 ±5% 8100 0.60 0.8 2.50 1.68 150 MLG1005SR13JT000
150 ±3% 8 100 0.55 0.7 3.50 2.44 150 MLG1005SR15HT000
150 ±5% 8100 0.55 0.7 3.50 2.44 150 MLG1005SR15JT000
Measurement item Product No. Manufacturer
L, Q 4291B +16193A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(19/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
 Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.*
(nH) Tolerance min. typ. max. typ.
160 ±3% 8 100 0.50 0.6 3.80 2.74 150 MLG1005SR16HT000
160 ±5% 8100 0.50 0.6 3.80 2.74 150 MLG1005SR16JT000
180 ±3% 8 100 0.50 0.6 3.80 2.88 150 MLG1005SR18HT000
180 ±5% 8100 0.50 0.6 3.80 2.88 150 MLG1005SR18JT000
200 ±3% 8 100 0.42 0.5 4.20 3.15 100 MLG1005SR20HT000
200 ±5% 8100 0.42 0.5 4.20 3.15 100 MLG1005SR20JT000
220 ±3% 8 100 0.45 0.5 4.20 3.02 100 MLG1005SR22HT000
220 ±5% 8100 0.45 0.5 4.20 3.02 100 MLG1005SR22JT000
240 ±3% 8 100 0.40 0.5 4.80 3.42 100 MLG1005SR24HT000
240 ±5% 8100 0.40 0.5 4.80 3.42 100 MLG1005SR24JT000
270 ±3% 8 100 0.40 0.5 4.80 3.54 100 MLG1005SR27HT000
270 ±5% 8100 0.40 0.5 4.80 3.54 100 MLG1005SR27JT000
300 ±3% 6 50 0.35 0.4 6.50 4.82 50 MLG1005SR30HT000
300 ±5% 650 0.35 0.4 6.50 4.82 50 MLG1005SR30JT000
330 ±3% 6 50 0.35 0.4 7.00 5.21 50 MLG1005SR33HT000
330 ±5% 650 0.35 0.4 7.00 5.21 50 MLG1005SR33JT000
360 ±3% 6 50 0.30 0.4 7.50 5.39 50 MLG1005SR36HT000
360 ±5% 650 0.30 0.4 7.50 5.39 50 MLG1005SR36JT000
390 ±3% 6 50 0.30 0.4 8.00 5.97 50 MLG1005SR39HT000
390 ±5% 650 0.30 0.4 8.00 5.97 50 MLG1005SR39JT000
Measurement item Product No. Manufacturer
L, Q 4291B +16193A Agilent Technologies
Self-resonant frequency 8720C Agilent Technologies
DC resistance Type-7561 Yokogawa
(20/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
0.3 0.3 0.3 0.3 0.3 22min. 27min. 46min. 49min. 53min. MLG1005S0N3BT000
0.3 0.3 0.3 0.3 0.3 22min. 27min. 46min. 49min. 53min. MLG1005S0N3CT000
0.4 0.4 0.4 0.4 0.4 22min. 27min. 46min. 49min. 53min. MLG1005S0N4BT000
0.4 0.4 0.4 0.4 0.4 22min. 27min. 46min. 49min. 53min. MLG1005S0N4CT000
0.5 0.5 0.5 0.5 0.5 22min. 27min. 46min. 49min. 53min. MLG1005S0N5BT000
0.5 0.5 0.5 0.5 0.5 22min. 27min. 46min. 49min. 53min. MLG1005S0N5CT000
0.6 0.6 0.6 0.6 0.6 22 27 46 49 53 MLG1005S0N6BT000
0.6 0.6 0.6 0.6 0.6 22 27 46 49 53 MLG1005S0N6CT000
0.7 0.7 0.7 0.7 0.7 22 28 45 49 54 MLG1005S0N7BT000
0.7 0.7 0.7 0.7 0.7 22 28 45 49 54 MLG1005S0N7CT000
0.8 0.8 0.8 0.8 0.8 26 34 57 60 66 MLG1005S0N8BT000
0.8 0.8 0.8 0.8 0.8 26 34 57 60 66 MLG1005S0N8CT000
0.9 0.8 0.8 0.8 0.8 21 27 44 47 53 MLG1005S0N9BT000
0.9 0.8 0.8 0.8 0.8 21 27 44 47 53 MLG1005S0N9CT000
0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N0BT000
0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N0CT000
0.9 0.9 0.9 0.9 0.9 22 29 48 50 56 MLG1005S1N0CT000
1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1BT000
1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1CT000
1.0 1.0 1.0 1.0 1.0 23 29 47 50 57 MLG1005S1N1ST000
1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2BT000
1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2CT000
1.1 1.1 1.1 1.1 1.1 23 29 48 50 56 MLG1005S1N2ST000
1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3BT000
1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3CT000
1.2 1.2 1.2 1.2 1.2 22 27 44 47 53 MLG1005S1N3ST000
1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5BT000
1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5CT000
1.4 1.4 1.4 1.5 1.5 23 29 47 50 56 MLG1005S1N5ST000
1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6BT000
1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6CT000
1.5 1.5 1.5 1.6 1.6 23 29 46 49 54 MLG1005S1N6ST000
1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8BT000
1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8CT000
1.7 1.7 1.7 1.7 1.7 20 26 41 43 49 MLG1005S1N8ST000
1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0BT000
1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0CT000
1.9 1.9 1.9 1.9 1.9 21 25 41 43 48 MLG1005S2N0ST000
2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2BT000
2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2CT000
2.1 2.1 2.1 2.1 2.2 22 27 44 47 52 MLG1005S2N2ST000
Product No. Manufacturer
4291B +16193A Agilent Technologies
(21/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4BT000
2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4CT000
2.3 2.3 2.3 2.3 2.4 21 26 42 44 49 MLG1005S2N4ST000
2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7BT000
2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7CT000
2.6 2.6 2.6 2.7 2.7 22 27 43 45 50 MLG1005S2N7ST000
2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0BT000
2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0CT000
2.9 2.9 3.0 3.0 3.1 24 29 47 49 54 MLG1005S3N0ST000
3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3BT000
3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3CT000
3.2 3.2 3.3 3.4 3.5 24 30 46 48 53 MLG1005S3N3ST000
3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6BT000
3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6CT000
3.4 3.4 3.6 3.6 3.8 21 26 40 42 46 MLG1005S3N6ST000
3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9BT000
3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9CT000
3.7 3.7 3.9 3.9 4.1 22 28 43 45 50 MLG1005S3N9ST000
4.1 4.1 4.3 4.4 4.6 24 30 47 49 53 MLG1005S4N3CT000
4.1 4.1 4.3 4.4 4.6 24 30 47 49 53 MLG1005S4N3ST000
4.5 4.5 4.8 4.9 5.2 23 30 45 47 50 MLG1005S4N7CT000
4.5 4.5 4.8 4.9 5.2 23 30 45 47 50 MLG1005S4N7ST000
4.9 4.9 5.4 5.6 6.1 23 29 42 43 44 MLG1005S5N1CT000
4.9 4.9 5.4 5.6 6.1 23 29 42 43 44 MLG1005S5N1ST000
5.4 5.4 5.8 5.9 6.3 22 28 42 43 45 MLG1005S5N6CT000
5.4 5.4 5.8 5.9 6.3 22 28 42 43 45 MLG1005S5N6ST000
6 6 6.8 7.1 7.8 24 29 42 43 43 MLG1005S6N2HT000
6 6 6.8 7.1 7.8 24 29 42 43 43 MLG1005S6N2ST000
6.5 6.6 7.4 7.8 8.6 23 28 40 41 41 MLG1005S6N8HT000
6.5 6.6 7.4 7.8 8.6 23 28 40 41 41 MLG1005S6N8JT000
7.2 7.4 8.6 9.2 10.5 24 30 41 41 39 MLG1005S7N5HT000
7.2 7.4 8.6 9.2 10.5 24 30 41 41 39 MLG1005S7N5JT000
7.9 8 9.3 9.9 11.3 23 28 38 38 36 MLG1005S8N2HT000
7.9 89.3 9.9 11.3 23 28 38 38 36 MLG1005S8N2JT000
8.8 9 10.8 11.6 13.7 24 30 40 39 36 MLG1005S9N1HT000
8.8 910.8 11.6 13.7 24 30 40 39 36 MLG1005S9N1JT000
9.7 9.9 12.4 13.5 16.7 24 30 37 36 31 MLG1005S10NHT000
9.7 9.9 12.4 13.5 16.7 24 30 37 36 31 MLG1005S10NJT000
10.6 10.9 13.8 15.1 19 23 28 34 33 28 MLG1005S11NHT000
10.6 10.9 13.8 15.1 19 23 28 34 33 28 MLG1005S11NJT000
Product No. Manufacturer
4291B +16193A Agilent Technologies
(22/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
11.7 12.1 16.2 18.3 23 29 33 31 MLG1005S12NHT000
11.7 12.1 16.2 18.3 23 29 33 31 MLG1005S12NJT000
12.6 13 18.3 21.3 20 24 25 22 MLG1005S13NHT000
12.6 13 18.3 21.3 20 24 25 22 MLG1005S13NJT000
14.7 15.3 22.0 26.0 23 28 29 26 MLG1005S15NHT000
14.7 15.3 22.0 26.0 23 28 29 26 MLG1005S15NJT000
15.6 16.2 24.1 29.0 22 26 26 22 MLG1005S16NHT000
15.6 16.2 24.1 29.0 22 26 26 22 MLG1005S16NJT000
17.7 18.6 29.0 23 28 26 MLG1005S18NHT000
17.7 18.6 29.0 23 28 26 MLG1005S18NJT000
19.7 20.8 36.8 21 25 21 MLG1005S20NHT000
19.7 20.8 36.8 21 25 21 MLG1005S20NJT000
21.8 23.3 22 27 MLG1005S22NHT000
21.8 23.3 22 27 MLG1005S22NJT000
23.8 25.5 22 26 MLG1005S24NHT000
23.8 25.5 22 26 MLG1005S24NJT000
27 29.6 20 23 MLG1005S27NHT000
27 29.6 20 23 MLG1005S27NJT000
30.1 33.5 19 21 MLG1005S30NHT000
30.1 33.5 19 21 MLG1005S30NJT000
33.5 37.8 20 23 MLG1005S33NHT000
33.5 37.8 20 23 MLG1005S33NJT000
36.7 41.5 21 23 MLG1005S36NHT000
36.7 41.5 21 23 MLG1005S36NJT000
40.3 46.9 20 21 MLG1005S39NHT000
40.3 46.9 20 21 MLG1005S39NJT000
44.3 51.6 20 21 MLG1005S43NHT000
44.3 51.6 20 21 MLG1005S43NJT000
50.2 63.2 19 20 MLG1005S47NHT000
50.2 63.2 19 20 MLG1005S47NJT000
53.7 65.6 19 19 MLG1005S51NHT000
53.7 65.6 19 19 MLG1005S51NJT000
60.9 80.2 19 18 MLG1005S56NHT000
60.9 80.2 19 18 MLG1005S56NJT000
67.5 89.8 18 16 MLG1005S62NHT000
67.5 89.8 18 16 MLG1005S62NJT000
75.8 107.5 17 15 MLG1005S68NHT000
75.8 107.5 17 15 MLG1005S68NJT000
86.5 135.2 17 13 MLG1005S75NHT000
86.5 135.2 17 13 MLG1005S75NJT000
Product No. Manufacturer
4291B +16193A Agilent Technologies
(23/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
Please contact us for ±2% inductance tolerance (code G) products.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
96.9    16    MLG1005S82NHT000
96.9 16 MLG1005S82NJT000
111.0    15     MLG1005S91NHT000
111.0 15 MLG1005S91NJT000
128.9    14     MLG1005SR10HT000
128.9 14 MLG1005SR10JT000
140.8    15     MLG1005SR11HT000
140.8 15 MLG1005SR11JT000
175.2    12     MLG1005SR12HT000
175.2 12 MLG1005SR12JT000
187.8    13     MLG1005SR13HT000
187.8 13 MLG1005SR13JT000
284.7    11     MLG1005SR15HT000
284.7 11 MLG1005SR15JT000
       MLG1005SR16HT000
MLG1005SR16JT000
       MLG1005SR18HT000
MLG1005SR18JT000
          MLG1005SR20HT000
MLG1005SR20JT000
          MLG1005SR22HT000
MLG1005SR22JT000
         MLG1005SR24HT000
MLG1005SR24JT000
          MLG1005SR27HT000
MLG1005SR27JT000
MLG1005SR30HT000
MLG1005SR30JT000
MLG1005SR33HT000
MLG1005SR33JT000
MLG1005SR36HT000
MLG1005SR36JT000
MLG1005SR39HT000
                MLG1005SR39JT000
Product No. Manufacturer
4291B +16193A Agilent Technologies
(24/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
10 100 1000 10000
0
1000
100
10
1
Frequency(MHz)
Inductance(nH)
R39 R18
R15
68N
15N
12N
10N
8N2
6N8
1N2
1N0
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
18N
56N
47N
39N
33N
27N
22N
82N
R12
R27
R22 R10
R33
Product No. Manufacturer
E4991A +16193A Agilent Technologies
(25/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1005S Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
0
Q
10 100 1000 10000
Frequency(MHz)
10
20
30
40
50
60
70
R39
R18
R15
68N
15N
12N
10N
8N2
6N8
1N2
1N0
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
18N
56N
47N
39N
33N
27N
22N
82N
R12
R33
R27
R22
R10
Product No. Manufacturer
E4991A +16193A Agilent Technologies
(26/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries
MLG1608Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
1.60±0.15
0.30±0.20 0.30±0.20
0.80±0.15 0.80±0.15
Dimensions in mm
0.8
0.6 0.8 0.6
(27/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1608 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
* Because it provides for a product of smaller inductance tolerance, please refer.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
LQ
min.
L, Q measuring
frequency
(MHz)
Self-resonant
frequency
(GHz)
DC resistance
(:)
Rated current
(mA)
max.
Part No.
(nH) Tolerance min. typ. max. typ.
1 ±0.3nH 8 100 10.0 20up 0.10 0.03 600 MLG1608B1N0ST000
1.2 ±0.3nH 8100 10.0 20up 0.10 0.04 600 MLG1608B1N2ST000
1.5 ±0.3nH 8 100 10.0 19.6 0.10 0.03 600 MLG1608B1N5ST000
1.8 ±0.3nH 8100 10.0 16.6 0.10 0.04 600 MLG1608B1N8ST000
2.2 ±0.3nH 10 100 8.0 10.8 0.10 0.05 600 MLG1608B2N2ST000
2.7 ±0.3nH 10 100 7.0 8.8 0.12 0.06 600 MLG1608B2N7ST000
3.3 ±0.3nH 10 100 6.5 8.8 0.12 0.06 600 MLG1608B3N3ST000
3.9 ±0.3nH 10 100 6.0 7.9 0.14 0.06 600 MLG1608B3N9ST000
4.7 ±0.3nH 10 100 5.0 6.8 0.15 0.08 600 MLG1608B4N7ST000
5.6 ±0.5nH 10 100 5.0 6.8 0.16 0.08 600 MLG1608B5N6DT000
6.8 ±0.5nH 10 100 4.5 5.7 0.18 0.10 600 MLG1608B6N8DT000
8.2 ±0.5nH 10 100 4.5 5.6 0.20 0.10 600 MLG1608B8N2DT000
10 ±5% 12 100 3.5 4.5 0.20 0.11 600 MLG1608B10NJT000
12 ±5% 12 100 3.0 3.8 0.25 0.13 600 MLG1608B12NJT000
15 ±5% 12 100 2.8 3.6 0.28 0.14 600 MLG1608B15NJT000
18 ±5% 12 100 2.6 3.3 0.32 0.16 600 MLG1608B18NJT000
22 ±5% 12 100 2.3 3.0 0.35 0.19 500 MLG1608B22NJT000
27 ±5% 12 100 2.0 2.7 0.40 0.21 500 MLG1608B27NJT000
33 ±5% 12 100 1.8 2.3 0.50 0.25 500 MLG1608B33NJT000
39 ±5% 12 100 1.6 2.0 0.55 0.26 400 MLG1608B39NJT000
47 ±5% 14 100 1.4 1.8 0.60 0.35 400 MLG1608B47NJT000
56 ±5% 14 100 1.2 1.8 0.70 0.41 400 MLG1608B56NJT000
68 ±5% 14 100 1.1 1.6 0.75 0.43 300 MLG1608B68NJT000
82 ±5% 14 100 1.0 1.4 0.80 0.50 300 MLG1608B82NJT000
100 ±5% 14 100 0.80 1.2 1.00 0.64 300 MLG1608BR10JT000
120 ±5% 14 100 0.65 0.8 1.20 0.89 300 MLG1608SR12JT000
150 ±5% 14 100 0.55 0.7 1.30 1.03 250 MLG1608SR15JT000
180 ±5% 14 100 0.50 0.6 1.40 1.08 250 MLG1608SR18JT000
220 ±5% 14 100 0.45 0.6 1.70 1.29 200 MLG1608SR22JT000
270 ±5% 14 100 0.35 0.5 2.00 1.59 200 MLG1608SR27JT000
330 ±5% 10 50 0.35 0.47 2.80 1.90 100 MLG1608SR33JT000
390 ±5% 10 50 0.30 0.43 3.00 2.06 100 MLG1608SR39JT000
470 ±5% 10 50 0.25 0.39 3.50 2.47 100 MLG1608SR47JT000
560 ±5% 10 50 0.25 0.36 4.50 3.20 70 MLG1608SR56JT000
680 ±5% 10 50 0.20 0.31 5.50 3.88 70 MLG1608SR68JT000
820 ±5% 10 50 0.15 0.22 5.50 3.76 70 MLG1608SR82JT000
1000 ±5% 10 50 0.13 0.19 5.50 4.27 70 MLG1608S1R0JT000
Measurement item Product No. Manufacturer
L, Q 4291B +16193A Agilent Technologies
Self-resonant frequency 8720C Panasonic
DC resistance Type-7561 Yokogawa
(28/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1608 Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
 Because it provides for a product of smaller inductance tolerance, please refer.
○Measurement equipment
＊ Equivalent measurement equipment may be used.
L(nH)typ. Q typ. Part No.*
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
1.0 1.0 1.0 1.0 1.0 39 48 77 82 95 MLG1608B1N0ST000
1.2 1.1 1.2 1.2 1.2 28 35 57 60 68 MLG1608B1N2ST000
1.5 1.5 1.5 1.5 1.5 37 48 78 81 93 MLG1608B1N5ST000
1.8 1.8 1.8 1.8 1.8 38 48 77 81 95 MLG1608B1N8ST000
2.2 2.1 2.2 2.2 2.2 44 54 88 91 107 MLG1608B2N2ST000
2.6 2.6 2.7 2.7 2.8 40 51 79 81 94 MLG1608B2N7ST000
3.2 3.2 3.3 3.3 3.4 38 48 76 79 91 MLG1608B3N3ST000
3.8 3.8 4.0 4.0 4.1 40 50 79 81 93 MLG1608B3N9ST000
4.6 4.6 4.9 5.0 5.2 41 51 76 79 88 MLG1608B4N7ST000
5.4 5.5 5.8 5.9 6.2 37 46 69 71 79 MLG1608B5N6DT000
6.6 6.7 7.3 7.5 8.0 38 47 67 68 74 MLG1608B6N8DT000
8.0 8.1 8.9 9.3 10 39 48 67 68 71 MLG1608B8N2DT000
9.8 10.0 11.5 12.1 13.6 38 47 63 63 61 MLG1608B10NJT000
11.8 12.1 14.8 16.0 19.3 39 48 59 57 51 MLG1608B12NJT000
14.8 15.4 20.6 23.4 38 46 49 46 MLG1608B15NJT000
17.8 18.5 25.5 29.3 36 44 47 42 MLG1608B18NJT000
21.9 22.9 33.6 40.2 36 44 43 38 MLG1608B22NJT000
27.1 28.8 50.6 37 43 34 MLG1608B27NJT000
33.4 36.0 37 43 MLG1608B33NJT000
40.2 45.0 36 40 MLG1608B39NJT000
49.1 56.0 38 41 MLG1608B47NJT000
59.6 71.1 37 38 MLG1608B56NJT000
74.0 92.8 34 33 MLG1608B68NJT000
91.1 120.6 33 31 MLG1608B82NJT000
118 35 MLG1608BR10JT000
188 23 MLG1608SR12JT000
MLG1608SR15JT000
MLG1608SR18JT000
MLG1608SR22JT000
MLG1608SR27JT000
MLG1608SR33JT000
MLG1608SR39JT000
MLG1608SR47JT000
MLG1608SR56JT000
MLG1608SR68JT000
MLG1608SR82JT000
MLG1608S1R0JT000
Product No. Manufacturer
4291B +16193A Agilent Technologies
(29/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1608Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
Product No. Manufacturer
E4991A +16193A Agilent Technologies
(30/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries MLG1608Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
○Measurement equipment
＊ Equivalent measurement equipment may be used.
0
Q
10 100 1000 10000
Frequency(MHz)
10
20
30
40
50
60
70
80
90
100
1R0 R82
R68 R27
R15
R12
R10 82N
68N
56N
39N
33N
27N
22N
18N
15N
12N
10N
8N2
5N6
4N7
3N3
2N2
1N2
1N0
47N
R18
R22
3N9
1N5
2N7
1N8
6N8
R56
R47
R39
R33
Product No. Manufacturer
E4991A +16193A Agilent Technologies
(31/31)
INDUCTORS
001-01 / 20140328 / inductor_commercial_high-frequency_mlg_en.fm
• All specifications are subject to change without notice.
MLGseries
Packaging Style
REEL DIMENSIONS
TAPE DIMENSIONS
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
1.5 +0.1
–0.0
Sprocket hole Cavity
A
KB
2.0±0.05 2.0±0.05
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
Type A B K
MLG0603S 0.68±0.05 0.38±0.05 0.5 max.
MLG1005S 1.12±0.1 0.62±0.1 0.8 max.
MLG1608 1.9±0.2 1.1±0.2 1.1 max.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TDK:
MLG1608B12NJ MLG1608B1N8S MLG1608B3N9S MLG1608BR10J MLG1608B10NJ MLG1608B18NJ
MLG1608B1N0S MLG1608B1N5S MLG1608B2N7S MLG1608B3N3S MLG1608B6N8D MLG1005S22NJ
MLG1005S0N7C MLG1005S0N9C MLG1005S1N3S MLG1005S1N6S MLG1005S2N4S MLG1005S3N6S
MLG1005S4N3S MLG1005S7N5J MLG1005S9N1J MLG1608SR15J MLG1608SR22J MLG1608SR27J
MLG1005S4N7S MLG1005S12NJ MLG1005SR12J MLG1005SR22J MLG0603S2N2S MLG0603S4N7S
MLG0603S12NJT MLG1005S0N6CT MLG1005S1N5ST MLG1005S2N0ST MLG1005S3N0ST MLG1005S6N2ST
MLG1005S6N8JT MLG1005S82NJT MLG1005SR39JT MLG0603S0N3C MLG1608S1R0J MLG1608SR33J
MLG1608SR47J MLG1005S0N3C MLG1005S0N4C MLG1005S13NJ MLG1005S43NJ MLG1005S51NJ
MLG1005S75NJ MLG1005SR16J MLG1005SR20J MLG1608SR68JT000 MLG0603S5N6ST000
MLG1005S33NJT000 MLG1608SR27JT000 MLG1005S47NJT000 MLG1005S1N8ST000 MLG0603S30NJT000
MLG1005S0N3CT000 MLG1005SR36JT000 MLG0603S5N1ST000 MLG1005S0N8CT000 MLG0603S13NJT000
MLG0603S2N4ST000 MLG1608B1N0ST000 MLG1005S2N4ST000 MLG0603S56NJT000 MLG1005S0N7CT000
MLG0603S0N3CT000 MLG0603S24NJT000 MLG1005S8N2JT000 MLG0603S20NJT000 MLG1005S43NJT000
MLG1608B2N2ST000 MLG1608SR47JT000 MLG0603S7N5JT000 MLG0603S22NJT000 MLG0603S8N2JT000
MLG1005SR18JT000 MLG0603S3N0ST000 MLG1005S15NJT000 MLG0603S33NJT000 MLG1005S27NJT000
MLG1608B3N3ST000 MLG1005S56NJT000 MLG0603S1N0ST000 MLG1608B82NJT000 MLG1608SR18JT000
MLG0603S2N7ST000 MLG1005S68NJT000 MLG1005SR30JT000 MLG0603SR10JT000 MLG1005S39NJT000
MLG1005S16NJT000 MLG1005S24NJT000 MLG0603S3N3ST000 MLG1005SR22JT000 MLG1005S75NJT000
MLG0603S0N6CT000 MLG1005S0N5CT000