Crystal oscillator Epson Toyocom Product Number (please contact us) SG-8002JF : Q3308JFx1xxxx00 SG-8002CA : Q3309CAx0xxxx00 CRYSTAL OSCILLATOR PROGRAMMABLE CA Type JF,CA Type SG - 8002JF / CA series *Frequency range : 1 MHz to 125 MHz *Supply voltage : 3.3 V / 5.0 V *Function : Output enable(OE) or Standby( ST ) *External dimensions : 7.0 x 5.0 x 1.4 t (mm) ***SG-8002CA *Pin compatible with ceramic package crystal oscillator (7 x 5) : SG-8002JF *Short mass production lead time by PLL technology. *SG-Writer available to purchase. Please contact Epson Toyocom or local sales representative. Actual size SG-8002JF SG-8002CA Specifications (characteristics) Item f0 Output frequency range Supply voltage Temperature range Specifications *2 PT / ST PH / SH 1 MHz to 125 MHz 4.5 V to 5.5 V Symbol VCC Storage temperature Operating temperature -55 C to +125 C T_stg T_use PC / SC VCC=4.5 V to 5.5 V 1 MHz to 125 MHz VCC=3.0 V to 3.6 V 1 MHz to 66.7 MHz VCC=2.7 V to 3.6 V 2.7 V to 3.6 V -20 C to +70 C (-40 C to +85 C) Remarks Store as bare product after unpacking -40 C to +85 C Refer to "Outline specifications" (Frequency range) -20 C to +70 C B: 50 x 10-6 ,C: 100 x 10-6 M: 100 x 10-6 -40 C to +85 C *3 Current consumption ICC 45 mA Max. 28 mA Max. No load condition, Max. frequency range Disable current I_dis 30 mA Max. 16 mA Max. OE=GND(PT,PH,PC) Stand-by current I_std 50 A Max. ST =GND(ST,SH,SC) 40 % to 60 % CMOS load:50 % VCC level, Max. load condition Symmetry*1 SYM 40 % to 60 % TTL load: 1.4 V level, Max. load condition High output voltage VOH VCC-0.4 V Min. IOH=-16 mA(PT / ST,PH / SH),-8 mA(PC / SC) Low output voltage VOL 0.4 V Max. IOL=16 mA(PT / ST,PH / SH), 8 mA(PC / SC) Output load condition (TTL) *1 L_TTL 5TTL Max. f090 MHz,Max. supply voltage 15 pF Max. Output load condition (CMOS) *1 L_CMOS 15 pF Max. 15 pF Max. Max. frequency and Max. supply voltage (CA:25 pF Max.) VIH 2.0 V Min. 70 % VCC Min. Output enable / disable ST terminal or OE terminal input voltage VIL 0.8 V Max. 20 % VCC Max. 3 ns Max. CMOS load: 20 % VCC to 80 % VCC level Rise time / Fall time *1 tr / tf 4 ns Max. TTL load: 0.4 V to 2.4 V level 10 ms Max. Time at minimum supply voltage to be 0 s Start-up time t_str -6 5 x 10 / year Max. +25 C, VCC=5.0 V/ 3.3 V (PC / SC) First year Frequency aging f_aging *1 Operating temperature (-40 C to +85 C), the available frequency, symmetry and output load conditions, please refer to "Outline specifications" page. Frequency tolerance (Unit:mm) External dimensions Footprint (Recommended) (Unit:mm) SG-8002JF 7.10.2 2PH 9245A Note. OE Pin (PT, PH, PC) OE pin = "H" or "open" : Specified frequency output. OE pin = "L" : Output is high impedance. Pin map Pin Connection 1 OE or ST 2 GND 3 OUT 4 VCC ST pin (ST, SH, SC) ST pin = "H" or "open" : Specified frequency output. ST pin = "L" : Output is low level (weak pull - down), oscillation stops. 0.4 5.08 1.5 Max. #2 0 Min. (0.75) 3.8 (0.75) Metal may be exposed on the top or bottom of this product. This will not affect any quality, reliability or electrical spec. SG-8002CA #3 E 125.000 PHC935C #1 7.00.2 1.4 #3 #4 2.6 #4 #2 #2 5.08 1.8 4.2 #1 C (ex. 0.01 F) 2.0 E 125.00C 4.60.2 #3 5.10.2 #4 5.00.2 . PLL-PLL connection & Jitter specification, please refer to "Jitter specifications and characteristics chart" page. PT / ST and PH / SH for "M" tolerance will be available up to 55 MHz. (JF:40 MHz) Checking possible by the Frequency Checking Program. Pin map Pin Connection 1 OE or ST 2 GND 3 OUT 4 VCC Resist 5.08 #1 To maintain stable operation, provide by-pass capacitor with more than 0.1 F at a location as near as possible to the power source terminal of the crystal products (between VCC - GND). +0.1 1.4 -0.15 *2 *3 f_tol 5.08 http://www.epsontoyocom.co.jp Product Configuration System Crystal Oscillators Programmables SG8002 JA 32.0000M H P Function Model Number P: OE Package Type DB: Plastic 19.8x7.6mm (SG51 Type) DC: Plastic 13.7x7.6mm (SG531 Type) JA: Plastic 14.0x9.8mm (SG615 Type) JC: Plastic 10.5x5.8mm (SG636 Type) JF: Plastic 7.1x5.1mm (SG645 Type) CA: Ceramic 7.0x5.0mm (SG710 Type) LB: NPO 5.0x3.2mm (SG550 Type) CE : Ceramic 3.2x2.5mm (SG310 Type) LA: NPO 3.2x2.5mm (SG350 Type) * Output Frequency 1.0 ~ 125MHz: M: Unit in MHz S: ST Power Supply (Vdd) Duty Level H: 5.0V, CMOS (50% Vdd) T: 5.0V, TTL (1.4V) C: 3.3V, CMOS (50% Vdd) C : L0 PURE SN Packaging Tape and Reel (except DB & DC) L0: 1000pcs per reel L3: 250pcs per reel B: Bulk Stick (DB Only) S: 25pcs/stick Stick (DC Only) S: 35pcs/stick Frequency Stability / Op Temp B: +/50ppm 20 ~ +70C C: +/100ppm 20 ~ +70C M: +/100ppm 40 ~ +85C *SG8002LA & SG8002DB: Not Recommended for New Designs PURE SN ROHS Blank : Not RoHs Compliant NOTE: Complete PB Free: SG8002CA/CE SG8002LA/LB