ZMM130 - GOOD-ARK Electronics

Note:

(1) Valid provided that electrodes are kept at ambient temperature.

Features

ZMM1 THRU ZMM200

SILICON PLANAR ZENER DIODES

Silicon Planar Zener Diodes

in MiniMELF case especially for automatic insertion. The

Zener voltages are graded according to the international E 24

standard. Smaller voltage tolerances and higher Zener

voltages on request.

These diodes are also available in DO-35 case with the type

designation ZPD1 thru ZPD51.

These diodes are delivered taped.

Details see Taping.

Weight approx. : 0.05g

Absolute Maximum Ratings (Ta=25 )

Symbols Values Units

Zener current see Table "Characteristics"

Power dissipation at Tamb=25 Ptot 500 1) mW

Junction temperature Tj175

Storage temperature range TS-55 to +175

Note:

(1) Valid provided that electrodes are kept at ambient temperature.

Characteristics at Tamb=25

Symbols Min. Typ. Max. Units

Thermal resistance

junction to ambient Air RthA - - 0.3 1) K/mW

DIMENSIONS

DIM

inches mm

Note

Min. Max. Min. Max.

A 0.134 0.142 3.4 3.6

B 0.055 0.059 1.40 1.50

C 0.008 0.016 0.2 0.4

Notes:

(1) Tested with pulses tp=20ms.

(2) Valid provided that electrodes are kept at ambient temperature.

(3) The ZMM1 is a silicon diode with operation in forward direction. Hence, the index of all parameters should be F instead of Z.

Connect the cathode electrode to the negative pole.

Type

Zener voltage range 1) Dynamic resistance Reverse leakage current Temp. coefficient

of Zener Voltage

Vznom IZT for VZT 2) rzjT and rzjk at IZK IR and IR 2) at VRTKVZ

VmA V mA A A V%/K

ZMM1 3) 0.75 5 0.7 ... 0.8 <8 <50 1 - - - -0.26 ... -0.23

ZMM2.0 2.0 5 1.9 ... 2.1 <85 <600 1 <100 <200 1 -0.09 ... -0.06

ZMM2.4 2.4 5 2.28 ... 2.56 <85 <600 1 <50 <100 1 -0.09 ... -0.06

ZMM2.7 2.7 5 2.5 ... 2.9 <85 <600 1 <10 <50 1 -0.09 ... -0.06

ZMM3.0 3.0 5 2.8 ... 3.2 <85 <600 1 <4 <40 1 -0.08 ... -0.05

ZMM3.3 3.3 5 3.1 ... 3.5 <85 <600 1 <2 <40 1 -0.08 ... -0.05

ZMM3.6 3.6 5 3.4 ... 3.8 <85 <600 1 <2 <40 1 -0.08 ... -0.05

ZMM3.9 3.9 5 3.7 ... 4.1 <85 <600 1 <2 <40 1 -0.08 ... -0.05

ZMM4.3 4.3 5 4.0 ... 4.6 <75 <600 1 <1 <20 1 -0.06 ... -0.03

ZMM4.7 4.7 5 4.4 ... 5.0 <60 <600 1 <0.5 <10 1 -0.05 ... +0.02

ZMM5.1 5.1 5 4.8 ... 5.4 <35 <550 1 <0.1 <2 1 -0.02 ... +0.02

ZMM5.6 5.6 5 5.2 ... 6.0 <25 <450 1 <0.1 <2 1 -0.05 ... +0.05

ZMM6.2 6.2 5 5.8 ... 6.6 <10 <200 1 <0.1 <2 2 0.03 ... 0.06

ZMM6.8 6.8 5 6.4 ... 7.2 <8 <150 1 <0.1 <2 3 0.03 ... 0.07

ZMM7.5 7.5 5 7.0 ... 7.9 <7 <50 1 <0.1 <2 5 0.03 ... 0.07

ZMM8.2 8.2 5 7.7 ... 8.7 <7 <50 1 <0.1 <2 6.2 0.03 ... 0.08

ZMM9.1 9.1 5 8.5 ... 9.6 <10 <50 1 <0.1 <2 6.8 0.03 ... 0.09

ZMM10 10 5 9.4 ... 10.6 <15 <70 1 <0.1 <2 7.5 0.03 ... 0.1

ZMM11 11 5 10.4 ... 11.6 <20 <70 1 <0.1 <2 8.2 0.03 ... 0.11

ZMM12 12 5 11.4 ... 12.7 <20 <90 1 <0.1 <2 9.1 0.03 ... 0.11

ZMM13 13 5 12.4 ... 14.1 <26 <110 1 <0.1 <2 10 0.03 ... 0.11

ZMM15 15 5 13.8 ... 15.6 <30 <110 1 <0.1 <2 11 0.03 ... 0.11

ZMM16 16 5 15.3 ... 17.1 <40 <170 1 <0.1 <2 12 0.03 ... 0.11

ZMM18 18 5 16.8 ... 19.1 <50 <170 1 <0.1 <2 13 0.03 ... 0.11

ZMM20 20 5 18.8 ... 21.2 <55 <220 1 <0.1 <2 15 0.03 ... 0.11

ZMM22 22 5 20.8 ... 23.3 <55 <220 1 <0.1 <2 16 0.04 ... 0.12

ZMM24 24 5 22.8 ... 25.6 <80 <220 1 <0.1 <2 18 0.04 ... 0.12

ZMM27 27 5 25.1 ... 28.9 <80 <220 1 <0.1 <2 20 0.04 ... 0.12

ZMM30 30 5 28 ... 32 <80 <220 1 <0.1 <2 22 0.04 ... 0.12

ZMM33 33 5 31 ... 35 <80 <220 1 <0.1 <2 24 0.04 ... 0.12

ZMM36 36 5 34 ... 38 <80 <220 1 <0.1 <2 27 0.04 ... 0.12

ZMM39 39 2.5 37 ... 41 <90 <500 0.5 <0.1 <5 30 0.04 ... 0.12

ZMM43 43 2.5 40 ... 46 <90 <500 0.5 <0.1 <5 33 0.04 ... 0.1 2

ZMM47 47 2.5 44 ... 50 <110 <600 0.5 <0.1 <5 36 0.04 ... 0.12

ZMM51 51 2.5 48 ... 54 <125 <700 0.5 <0.1 <10 39 0.04 ... 0.12

ZMM56 56 2.5 52 ... 60 <135 <700 0.5 <0.1 <10 43 0.04 ... 0.12

ZMM62 62 2.5 58 ... 66 <150 <1000 0.5 <0.1 <10 47 0.04 ... 0.1 2

ZMM68 68 2.5 64 ... 72 <200 <1000 0.5 <0.1 <10 51 0.04 ... 0.1 2

ZMM75 75 2.5 70 ... 79 <250 <1000 0.5 <0.1 <10 56 0.04 ... 0.1 2

ZMM82 82 2.5 77 ... 87 <300 <1500 0.25 <0.1 <10 62 0.05 ... 0.12

ZMM91 91 1 85 ... 96 <450 <2000 0.1 <0.1 <10 68 0.05 ... 0.12

ZMM100 100 1 94 ... 106 <450 <5000 0.1 <0.1 <10 75 0.05 ... 0.12

ZMM110 110 1 104 ... 116 <600 <5000 0.1 <0.1 <10 82 0.05 ... 0.12

ZMM120 120 1 114 ... 127 <800 <5500 0.1 <0.1 <10 91 0.05 ... 0.12

ZMM130 130 1 124 ... 141 <950 <6000 0.1 <0.1 <10 100 0.05 ... 0.12

ZMM150 150 1 138 ... 156 <1250 <6500 0.1 <0.1 <10 110 0.05 ... 0.12

ZMM160 160 1 153 ... 171 <1400 <7000 0.1 <0.1 <10 120 0.05 ... 0.12

ZMM180 180 1 168 ... 191 <1700 <8500 0.1 <0.1 <10 130 0.05 ... 0.12

ZMM200 200 1 188 ... 212 <2000 <10000 0.1 <0.1 <10 150 0.05 ... 0.12