fiAMOSPEC HIGH-POWER PNP SILICON TRANSISTOR ...for use as an output device in complementary audio amplifiers PNP to 100-Watts music power per channel. MJ4502 FEATURES * Continuous Collector Current- |,= 30A * High DC Current Gain- hFE=25-100@I|,= 7.5A * Excellent Safe Operating Area Vee{sat)=0-8V(Max)@I=7.5A,|,= 750mA 30 AMPERE * Complement to the NPN MJ802 POWER TRANSISTOR PNP SILICON 100 VOLTS MAXIMUM RATINGS 200 WATTS Characteristic Symbol Rating Unit Collector-Base Voltage Vepo 100 Vv Collector-Emitter Voltage Veer 100 V Collector-Emitter Voltage Voeo 90 Vv Emitter-Base Voltage Vepo 4.0 Vv Collector Current - Continuous le 30 A Base Current-Continuous Ip 7.5 A Total Power Dissipation @T,=25C Py 200 W Derate above 25C 1.14 wc Operating and Storage Junction Ty: Ts6 C Temperature Range -65 to +200 THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance Junction to Case Rejc 0.875 CAV PIN 1.BASE 2.EMITTER COLLECTOR(CASE) FIGURE -1 POWER DERATING 200 DIM MILLIMETERS oo MIN | MAX E175 x A 38.75 | 39.96 = 150 B | 19.28 | 22.23 2 125 Cc 7.96 9.28 < D 11.18 | 12.19 9 100 E 25.20 | 26.67 ao 75 F 0.92 1.0 w G 1.38 | 1.62 = 50 H 29.90 | 30.40 a 55 | | 16.64 | 17.30 of J | 388 | 436 0 K 10.67 | 11.18 0 25 50 75 100 125 150 175 200 To , TEMPERATURE? C)MJ4502 PNP ELECTRICAL CHARACTERISTICS ( T, = 25C unless otherwise noted ) Characteristic Symbol Max Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage(1) (lg= 200 mA, |,= 0) Vceo (sus) Collector-Emitter Breakdown Voitage(1) (I= 200 mA,Rge= 100 ohm _) Veer 100 Collector Cutoff Current (Vop= 100 V, I= 0 ) (Vep= 100 V, I= 0 ,T,.=150C) leso mA Emitter Cutoff Current (Vpe= 4.0 V, I= 0) ON CHARACTERISTICS (1) DC Current Gain (IL= 7.5 AVe_= 2.0V) hFE 25 100 Collector-Emitter Saturation Voltage (I= 7.5 A, 1,=0.75 A) VeE(sat) 0.8 Base-Emitter Saturation Voltage (Ip= 7.5A, I,= 0.75 A) Vpe{sat) 1.3 Base-Emitter On Voltage (Ip= 7.5 A, Veg= 2.0 V) Vee{on) 1.3 DYNAMIC CHARACTERISTICS Current-Gain Bandwidth Product (Ig= 1.0 A,Veg= 10 V,f = 1.0 MHz) 2.0 MHz (1) Pulse Test: Pulse width = 300 us , Duty Cycle = 2.0%MJ4502 PNP a a DC CURRENT GAIN "ON" VOLTAGE 2.0 16 = a o & A 12 3 = g 4 5 E os Veg (eat) @lota=10 : g z Vac@Voe=2V Data shown is obtained from puise tests o4 and adjusted to rulify effect of | cao Vee say@ lofig=t0 9 005 04. 02 1 2 5 10 20 30 0.03005 01 02 05 1 2 5 10 2030 ic , COLLECTOR CURRENT (AMP) ic , COLLECTOR CURRENT (AMP) ACTIVE-REGION SAFE OPERATING AREA (SOA) T,=200C Bonding Wire Linit Second Breakdown Limit ~-~ Thermally Limited T ,=25C Puse <10% Ic , COLLECTOR CURRENT (Amp) 4 2 5 10 20 50 100 Vee , COLLECTOR EMITTER VOLTAGE (VOLTS) The safe Operating Area Curves indicate I-Vce limits below which the device will not enter secondary break- down .Collector load lines for specific circuits must fall within the applicable Safe Area to avoid causing a cata- strophic failure. To insure operating below the maximum Ty , power-temperature derating must be observed for both steady state and pulse power conditions.