MOEH and MOEZ Series / Euro Package, 5 Pin OCXO 3/4 Standard CO-08 OCXO Euro Package 3/4 Wide Frequency Range 3/4 SC Cut Crystal Option Available 3/4 Custom Options Available ELECTRICAL SPECIFICATION: Frequency Range Stability Frequency Frequency Frequency Frequency 1.000MHZ to 150.000MHZ at +25C at time of shipment vs. Ambient vs. Voltage vs. Load AT Cut SC Cut Frequency vs. Time Warm Up Supply and Reference Voltages Supply Voltage (Vdd) Steady State Warm Up Supply Current Reference Voltage 10 ppb at +25C with Vnom on Pin 1 See Part Number Guide for Options Less than 5 ppb for 5% change in Supply Voltage Less than 5 ppb for 5% change in Load 1.0 ppm per year after 30 days 0.1 ppm per year after 30 days 3 min at +25C to 1.0 ppm of final frequency (1 hr reading) +3.30 VDC 5% 540 mA 1000 mA +3.00 VDC 5% +5.00 VDC 5% 360 mA 720 mA +4.00 VDC 5% +12.00 VDC 5% 150 mA 650 mA 4.00 VDC 5% Output HCMOS Logic "0" (max) Logic "1" (min) Symmetry (50% of Waveform) Load +3.30 VDC 5% +5.00 VDC 5% +12.00 VDC 5% +0.33 VDC +0.50 VDC +0.50 VDC +2.97 VDC +4.50 VDC +4.50 VDC See Part Number Guide for Options 15pF Sinewave Amplitude Spurious (Harmonics) Spurious (Non Harmonics) Load See Part Number Guide for Options -20 dBc -80 dBc 50 Electronic Frequency Control Control Voltage Range Vnom (Pin 1) Total Frequency Change +3.30 VDC 5% 0.00 to +3.30 VDC +1.65 VDC AT Cut SC Cut Slope Input Impedance +5.00 VDC 5% 0.00 to + 5.00 VDC +2.50 VDC 1.0 ppm typ 0.6 ppm min Positive 100k typ +12.00 VDC 5% 0.00 to + 5.00 VDC +2.50 VDC MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Specifications subject to change without notice Revision: MOEH021810D 1 of 2 PART NUMBER GUIDE: Frequency MOE Output Frequency Stability 002 = 2 ppb 005 = 5 ppb 010 = 10 ppb 050 = 50 ppb XXX = 3 digits in ppb Supply Voltage Height A = 18.64 [.734] B = 13.46 [.530] H = HCMOS Z3 = Sinewave +3dBm Z7 = Sinewave +7dBm RoHS Compliant Blank = Not Compliant F = is Compliant Crystal Cut 3 = +3.30 VDC 5 = +5.00 VDC 12 = +12.00 VDC Blank = AT Cut S = SC Cut Operating Temperature A = 0C to + 50C C = -20C to +70C D = -30C to +70C E = -30C to +80C F = -40C to +85C G = 0C to +70C Symmetry Blank = 40%/60% A = 45%/55% Value Added Options Blank = No Added Options S3 = Stratum 3 Please Consult with MMD Sales Department for any other Parameters or Options MECHANICAL DETAIL: 35.33 [1.391] H DIM 25.40 [1.000] 6.35 [.250] MIN 12.70 [.500] MMD PART NUMBER FREQUENCY SYYWW 3 26.97 [1.062] 4 2 17.60 [.693] PIN CONNECTIONS PIN 1 FREQUENCY CONTROL PIN 2 REFERENCE VOLTAGE PIN 3 SUPPLY VOLTAGE OUTPUT PIN 4 PIN 5 GROUND 15.24 [.600] 0.80 [.031] 1 8.80 [.346] O2.00 [O.079] 0.51 [.020] A B 5 HEIGHT DIMENSION 18.64 [.734] 13.46 [.530] 17.78 [.700] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN NUMBERS ARE FOR REFERENCE ONLY ENVIRONMENTAL/MECHANICAL SPECIFICATION: Shock Solderability Vibration Gross Leak Test Fine Leak Test MSL MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A Level 1 per IPC/JEDEC'S J-STD-20 MARKING DETAIL: Line Line Line Line 1 2 3 4 = MMD = MMD Part Number = Frequency Output = Data Code S = Internal Code YYWW = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Black dot to denote Pin 1 PHASE NOISE: Phase Noise at 10.000MHZ 10 Hz 100 Hz 1 kHz 10 kHz SC Cut Crystal -110 dBC -130 dBc -140 dBc -155 dBc AT Cut Crystal -100 dBc -110 dBc -135 dBc -140 dBc MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Specifications subject to change without notice Revision: MOEH021810D 2 of 2