AC SERIES CHASSIS CONNECTORS AC SERIES XLR THERMOPLASTIC CHASSIS MOUNT CONNECTORS Options This receptacle is manufactured from glass filled UL94V-0 PBT Resin, and provides a lower cost alternative to the `Z' series metal shell. A positive latch lock system secures the mating cable connector. Manufactured to comply with IEC 268-12 and AES 14-1992 standards. CSA File Number 68598 * Solder Bucket termination Features * Horizontal PCB contacts * Insulation Displacement Contacts (IDC) * Vertical PCB contacts * Thermoplastic Shell. * Bulk Packaging * The "D" size housing can be either front or rear mounted using the same panel cutout. * Single Bag packs * A leading first mate last break socket contact is standard on all female connectors (Pin 1). * Latching or Non-latching. * Solder cup or Insulation Displacement Contact (IDC) as well as Vertical or Horizontal PCB versions are available. * Latching and Non-latching versions available. * Cost effective stamped contacts Ordering Codes We have listed the more common ordering codes in each section. For further options please refer to the part number breakdown charts. Please contact us if you need any further assistance. * Available in 3 contact arrangements only. Simple steps to guide you in using this catalogue 1) Identify the product group listed in Contents on page 1 and go directly to that page number. 2) Each product group cover page then details information and options available. 3) Refer to the product detail pages and identify the product you require pictorially. 4) Read the product description column for the products standard features. 5) Use variations column to determine your choice. 6) Identify part number. 7) In the event the particular option you require is not listed please refer to the part number breakdown page at the end of each section. 8) Please contact us directly if you have any further problems. * Compatible with all other XLR brands. 59 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS THERMOPLASTIC D - TYPE FLANGE Features: * Thermoplastic shell. * D type Flange. * Solder Bucket connections. * Vertical or Horizontal PCB mounting. * Stamped contacts. * Leading first mate last break socket contact. * Positive latch lock system. * Coloured housings available as specials. Options: Solder Buckets, Vertical or Horizontal PCB, Bulk Pack, Latching or Non-latching, Gold Plated Contacts, Machined Contacts. Specifications: 64 PCB Footprints: 65 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) Part Number Breakdown: 61 Panel Cutouts: 65 DESCRIPTION VARIATIONS PART NUMBER XLR 3 pole male, D Flange, Thermoplastic shell, Solder Buckets Standard AC3MDP Bulk Pack AC3MDP BULK Non-Latching AC3MDPL Non-Latching Bulk AC3MDPL BULK Standard AC3MMDP Bulk Pack AC3MMDP BULK Non-Latching AC3MMDPL Non-Latching Bulk AC3MMDPL BULK Standard AC3FDP Bulk Pack AC3FDP BULK Non-Latching AC3FDPL Non-Latching Bulk AC3FDPL BULK Standard AC3MDPH Bulk Pack AC3MDPH BULK Non-Latching AC3MDPHL Non-Latching Bulk AC3MDPHL BULK Standard AC3FDPH Bulk Pack AC3FDPH BULK Non-Latching AC3FDPHL Non-Latching Bulk AC3FDPHL BULK Standard AC3MDPV Bulk Pack AC3MDPV BULK Non-Latching AC3MDPVL Non-Latching Bulk AC3MDPVL BULK Standard AC3FDPV Bulk Pack AC3FDPV BULK Non-Latching AC3FDPVL Non-Latching Bulk AC3FDPVL BULK XLR 3 pole male, D Flange, Airtight Thermoplastic shell, Machined Contacts, Solder Buckets XLR 3 pole female, D Flange, Thermoplastic shell, Solder Buckets XLR 3 pole male, D Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole female, D Flange, Thermoplastic shell, Horizontal PCB mount XLR 3 pole male, D Flange, Thermoplastic shell, Vertical PCB mount XLR 3 pole female, D Flange, Thermoplastic shell, Vertical PCB mount 60 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS THERMOPLASTIC D - TYPE FLANGE PART NUMBER BREAKDOWN AC CT ND LAY OU ER TS SH EL L SH STY LE EL L SE TE R IE RM IN S LO AT CK ION IN G M EC HA NI CO SM NT AC T PL AT IN G PA CK AG IN G GE TA CO N SE R IE S PR E FI X THERMOPLASTIC D TYPE FLANGE 3 M D P V L - AU BULK E. G . AC3MDPVL-AU BULK AC (Series Prefix),3 contacts, Male, D (Small Shell), P (Thermoplastic Chassis series) Vertical Printed Circuit Board, Latchless - AU (Gold Plated Contacts), Bulk Packaged. SERIES PREFIX AC CONTACT LAYOUT 3 GENDER F M MM SHELL STYLE D SHELL SERIES P TERMINATION Blank V H LOCKING MECHANISM Blank CONTACT PLATING Blank L AU PACKAGING Blank BULK = = = = = = = = = = = = = = = = Series Prefix 3 Contacts only Female Socket Contacts Male Pin Contacts Male Machined Contacts Small Shell Thermoplastic Chassis Series Solder Buckets Vertical Printed Circuit Board Horizontal Printed Circuit Board Latching Latchless (Non-Latching) Standard Plating (Silver or Tin Refer to Standard Data.) Gold Plated Contacts Individual Bags Bulk Packed 61 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS THERMOPLASTIC TYPE - IDC (SOLDERLESS) The Insulation Displacement Contact (IDC) connector is ideal for Original Equipment Manufacturers and end users alike and offers an alternative to our standard solder connector. Connectors can be can be quickly and easily assembled without screws or a soldering iron - by hand. Labour savings of up to 60% in termination time can be achieved. Recommended Cable Specifications: page 64 Features: * Thermoplastic Shell. * Optional "D", "P" or Dual Housing flange sizes. * Insulation Displacement Contacts (IDC) * Stamped contacts. * Leading first mate last break socket contact. * Positive latch lock system. * Coloured housings available as specials. Options: Gold plated contacts, Bulk Pack, Latching or Non-latching Part Number Breakdown: page 63 Specifications: page 64 Assembly Instructions: page 66 Panel Cutouts: page 65 PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION XLR 3 pole male, D Flange, IDC contacts, Thermoplastic shell XLR 3 pole female, D Flange, IDC contacts, Thermoplastic shell XLR 3 pole male, Wide Flange, IDC contacts, Thermoplastic shell XLR 3 pole female, Wide Flange, IDC contacts, Thermoplastic shell VARIATIONS PART NUMBER Standard AC3MDPI Bulk Pack AC3MDPI BULK Non-Latching AC3MDPIL Non-Latching Bulk AC3MDPIL BULK Standard AC3FDPI Bulk Pack AC3FDPI BULK Non-Latching AC3FDPIL Non-Latching Bulk AC3FDPIL BULK Standard AC3MPPI Bulk Pack AC3MPPI BULK Non-Latching AC3MPPIL Non-Latching Bulk AC3MPPIL BULK Standard AC3FPPI Bulk Pack AC3FPPI BULK Non-Latching AC3FPPIL Non-Latching Bulk AC3FPPIL BULK 62 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS E. G . AC3MDPIL-AU BULK AC (series prefix),3 contacts, Male, D Flange, Plastic Shell, IDC, Latchless, - AU (Gold Plated Contacts), Bulk Packaged. SERIES PREFIX AC CONTACT LAYOUT 3 GENDER F M SHELL STYLE D SHELL SERIES P TERMINATION I LOCKING MECHANISM Blank CONTACT PLATING Blank L AU PACKAGING Blank BULK = = = = = = = = = = = = = AC LL E SH ST 3 M D P I L - AU CT TA N CO IN G R DE N GE CK AG CT TA N CO G IN AT PL PA P E YL EL L SE TE RM RIES IN LO AT CK ION IN G M EC H IDC D AND P THERMOPLASTIC CHASSIS TYPE S IE R SE LA SH PART NUMBER BREAKDOWN S UT YO IX F RE AN IS M THERMOPLASTIC TYPE - IDC BULK Series Prefix 3 Contacts only Female Socket Contacts Male Pin Contacts D Flange Thermoplastic Chassis Series IDC Termination Latching Latchless Standard Plating (Silver or Tin Refer to Standard Data.) Gold Plated Contacts Individual Bags Bulk Packed 63 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS STANDARD DATA STANDARD DATA AC CHASSIS - THERMOPLASTIC VALUE GENERAL CHARACTERISTICS Number of contacts 3 AC Series Contact Arrangements (Front view of pin inserts) Termination Solder / IDC / Printed Circuit Board (PCB) Wire Gauge - Stranded wire: IDC 24AWG Solder 12AWG Printed Circuit Board (PCB) ELECTRICAL CHARACTERISTICS N/A Flammability UL94V-0 Environmental Complies with EU RoHS 2 Directive 2011/65/EU Service Voltage RMS 133V 1) Test Voltage AC RMS 1400V Current carrying capacity: IDC 1A Solder 15A Printed Circuit Board (PCB) 15A Typicial Contact Resistance 3m Insulation Resistance 1000M CLIMATIC CHARACTERISTICS Protection Class MECHANICAL CHARACTERISTICS Weight 2) MATERIALS Connector Shell - Thermoplastic Thermoplastic, ULV94V-0 Modified PPE Resin Shell Finish Black, other colours available - contact factory Insulators ULV94V-0 PBT Resin or Modified PPE Resin Operating Temperature Mechanical Operations IP40 -25C to +75C (-13F to +167F) 14g - (0.030lb) 1000 mating cycles Male Contact Stamped IDC-Material/Plating Phosphor Bronze / Silver or Gold (optional) Stamped Solder and PCB-Material/Plating Phosphor Bronze / Silver or Gold (optional) Female Contact Stamped IDC-Material/Plating Phosphor Bronze / Tin or Gold (optional) Stamped Solder and PCB-Material/Plating Phosphor Bronze / Tin or Gold (optional) Rev 3 - 03/2013 IDC RECOMMENDED CABLE DIMENSIONS 1) 64 2) Not suitable for domestic applications above 50V Approximate weight in grams does not include packaging. Please contact us for exact weight for shipping purposes. ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS THERMOPLASTIC SHELL TYPE AC SERIES RECEPTACLES THERMOPLASTIC MOUNTING INFORMATION `D' SERIES 90 PCB (H) `D' SERIES STRAIGHT PCB (V) PCB FOOTPRINT - CONNECTOR SIDE OF PCB AC3FDPH AC3MDPH AC3FDPV AC3MDPV PANEL CUTOUT DIMENSIONS - FRONT VIEW AC3FDP / AC3MDP 65 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com AC SERIES CHASSIS CONNECTORS IDC ASSEMBLY INSTRUCTIONS AC IDC SERIES CHASSIS ASSEMBLY INSTRUCTIONS 1 Lay the insulated conductors between the wire holding fingers. The fingers will retain the wire if it is inserted sufficiently. 2 Break the strap off from the wire holder and the cap. Assemble the cap to the wire holder as shown. Push it home until the second snap operates. 3 Align the wire holder and cap assembly with the slots down the side of the connector body. Push together, being careful not to damage the IDC blades through misalignment. 4 Ensure wire holder snaps into the body. 66 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com