Bussmann(R) Military Fuseholders FHL10U HGA-C Panel Mount-Lamp Indicating Dimensional Data 3.88" (98.4mm) 1.19" .81" (30.2mm) (20.6mm) 1.81" (46.0mm) Drilled Mounting Hole Dimensional Tolerance + 0.005" (0.13 mm) .109" RAD. .156" DIA. + .002" (4.0mm + .05mm) (2.8mm) .105" RAD. CATALOG SYMBOL: FHL10U LAMP INDICATING MEETS MILITARY SPECIFICATION - MIL-F-19207/1 NO AGENCY LISTINGS FOR MILITARY 1/4" x 1-1/4" FUSES: F02 AND F03 SERIE COMMERCIAL EQUIVALENT: HGA-C (2.67mm) .974" (24.7mm) .516" (13.1mm) .938" .469" (23.8mm) (11.9mm) .433" (11.0mm) .437" RAD. .400" (11.0mm) (10.2mm) .800" (20.3mm) Specifications Knob Clear transparent bayonet type (fuses mount in fuse clips of a fuse carrier) Terminals Threaded stud type; tooth lockwashers and hex nuts. Enclosure Unsealed--(FHL10U) IAW MIL-STD-108. Panel Thickness 0.125 Max. Rating 30 amperes. 90--250 volts. Resistor 120,000 ohms. Body Material Grey; meets MIL-M-14; fire retardent IAW MIL-STD-454. Fuse Style MIL-F-15160 F02, F03 and MIL-F-23419/9 FM09. Qualified and tested per MIL-F-19207. Group A, B and C. Mechanical Shock MIL-STD-202. Method I. Terminal Strength 20 lbs. Torque 15 lbs.-inch. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-17-98 SB98107 Rev. A Form No. FHL10U Page 1 of 1 BIF Doc #2134