POWER PhotoMOS RELAYS 1-channel (Form A) Type PhotoMOS RELAYS FEATURES 210.2 .827.008 3.50.2 .138.008 12.50.2 .492.008 mm inch 1. High capacity PhotoMOS Relay in a compact and slim 4-pin SIL 2. Extremely low ON resistance 3. Control low-level signal Power Photo MOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current 5. High I/O isolation voltage 2,500 V 6. Eliminates the need for a counter electromotive protection diode in the drive circuit on the input side 7. Eliminate the need for a power supply to drive the power MOSFET 8. PC board layout is simplified 9. No restriction on mounting direction 10. Varistor incorporated type is also available. TYPICAL APPLICATIONS * High-speed inspection machines * IC checker * NC machine, Robots * Office machines * Telecommunication * Automotive * Industrial control TYPES 1. AC/DC type Output rating Load voltage 60 V 100 V 200 V 400 V Load current 3.0 A 2.0 A 1.0 A 0.5 A Part No. AQZ202 AQZ205 AQZ207 AQZ204 Packing quantity Inner carton Outer carton 25 pcs. 500 pcs. 2. DC type Output rating Load voltage 60 V 100 V 200 V 400 V Load current 4.0 A 2.6 A 1.3 A 0.7 A Part No. AQZ102 AQZ105 AQZ107 AQZ104 Packing quantity Inner carton Outer carton 25 pcs. 500 pcs. Notes: Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC 607 AQZ10, 20 RATING 1. AC/DC type 1) Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current Symbol IF LED reverse voltage Peak forward current Power dissipation Load voltage (Peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg Input AQZ202 AQZ205 AQZ207 AQZ204 50 mA 3V 1A 75 mW 60 V 100 V 200 V 400 V 3.0 A 2.0 A 1.0 A 0.5 A 9.0 A 6.0 A 3.0 A 1.5 A 1.6 W 1.6 W 2,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks f = 100 Hz, Duty factor = 0.1% 100 ms (1 shot), VL = DC Non-condensing at low temperatures 2) Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical LED operate current Input IFon Maximum Minimum Typical Typical Maximum LED turn off current LED dropout voltage IFoff VF Typical On resistance Ron Maximum Output Off state leakage current AQZ202 0.23 0.7 2.1 0.18 0.34 1.1 3.2 Minimum Riso 1,000 M 500 V DC Maximum -- 0.5 cps Minimum Minimum -- -- 10 to 55 Hz at double amplitude of 3 mm 4,900 m/s2 {500 G}1 ms 5.64 ms 1.65 ms 5.65 ms 2.57 ms 3.88 ms 10.0 ms 0.22 ms Turn off time* 0.21 ms 0.10 ms 0.08 ms Toff Maximum I/O capacitance Typical Maximum Initial I/O isolation resistance Maximum operating speed Note: Recommendable LED forward current IF= 5 to 10 mA. *Turn on/off time Input 90% 608 IF = 10 mA IL =Max. Within 1 s on time f = 1 MHz VB = 0 1.12 ms 5.0 ms Maximum 10% Toff IF = 50 mA 0.8 pF 1.5 pF 2.40 ms Ton Typical Ton IL= 100 mA VL= 10 V Ciso 2.46 ms Typical Output Condition IL= 100 mA VL= 10 V 3.0 ms 10 A Maximum Vibration resistance Shock resistance AQZ204 0.11 -- Turn on time* Transfer characteristics AQZ207 1.0 mA 3.0 mA 0.4 mA 0.9 mA 1.25 V (1.16 V at IF = 10 mA) 1.5 V IF = 0 VL = Max. IF = 10 mA IL = 100 mA VL = 10 V IF = 5 mA IL = 100 mA VL = 10 V IF = 5 mA or 10 mA IL = 100 mA VL = 10 V Maximum Typical Switching speed AQZ205 IF = 10 mA Duty factor = 50% IL = Max., VL = Max. 2 hours for 3 axes 3 times for 3 axes AQZ10, 20 2. DC type 1) Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (DC) Continuous load current (DC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQZ102 AQZ105 AQZ107 AQZ104 Remarks 50 mA 3V 1A f = 100 Hz, Duty factor = 0.1% 75 mW 60 V 100 V 200 V 400 V 4.0 A 2.6 A 1.3 A 0.7 A 9.0 A 6.0 A 3.0 A 1.5 A 100 ms (1 shot), VL = DC 1.35 W 1.35 W 2,500 V AC -40C to +85C -40F to +185F Non-condensing at low temperatures -40C to +100C -40F to +212F 2) Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum Typical Typical LED operate current Input LED turn off current LED dropout voltage Maximum Maximum 0.4 mA 0.9 mA IL= 100 mA VL= 10 V VF 1.25 V (1.16 V at IF = 10 mA) 1.5 V IF = 50 mA 0.05 0.081 0.34 1.06 0.09 0.17 0.55 1.6 Typical 1.66 ms 3.0 ms 1.89 ms 0.83 ms 1.01 ms 5.0 ms Ton Typical 3.79 ms Maximum 4.50 ms 1.75 ms 2.34 ms 10.0 ms Typical 0.15 ms Turn off time* Transfer characteristics IF = 10 mA IL =Max. Within 1 s on time IF = 0 VL = Max. IF = 10 mA IL = 100 mA VL = 10 V IF = 5 mA IL = 100 mA VL = 10 V IF = 5 mA or 10 mA IL = 100 mA VL = 10 V 10 A -- Turn on time* Condition IFoff Maximum Switching speed AQZ104 IL= 100 mA VL= 10 V Maximum Off state leakage current AQZ107 IFon Ron Output AQZ105 1.0 mA 3.0 mA Typical On resistance AQZ102 0.19 ms 0.08 ms 0.08 ms Toff Maximum I/O capacitance Typical Maximum Ciso 0.8 pF 1.5 pF f = 1 MHz VB = 0 Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC Maximum operating speed Maximum -- 0.5 cps Minimum Minimum -- -- 10 to 55 Hz at double amplitude of 3 mm 4,900 m/s2 {500 G} 1 ms Vibration resistance Shock resistance IF = 10 mA Duty factor = 50% ILxVL= 200 (VA) 2 hours for 3 axes 3 times for 3 axes Note: Recommendable LED forward current IF= 5 to 10 mA. *Turn on/off time Input 90% 10% Output Ton Toff For Dimensions, see Page 442. For Schematic and Wiring Diagrams, see Page 448. For Cautions for Use, see Page 453. 609 AQZ10, 20 REFERENCE DATA 1.-(2) Load current vs. ambient temperature characteristics (DC type) 2. Load current vs. ambient temperature characteristics in adjacent mounting Allowable ambient temperature: -40C to +85C -40F to +185F Allowable ambient temperature: -40C to +85C -40F to +185F IL : Load current; IL (max.): Maximum continuous load current 3.5 4.5 3.0 4.0 AQZ205 2.0 1.5 AQZ207 3.5 AQZ102 3.0 2.5 AQZ105 2.0 1.5 1.0 AQZ204 IL/IL (max.)x100,% 2.5 120 100 AQZ202 Load current, A Load current, A 1.-(1) Load current vs. ambient temperature characteristics (AC/DC type) =20 mm =10 mm 80 =5 mm 60 40 AQZ107 1.0 20 0.5 =Adjacent mounting pitch 0.5 0 -40 -20 0 0 -40 -20 20 40 60 80 85100 Ambient temperature, C AQZ104 0 20 40 60 80 85100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85100 Ambient temperature, C 3.-(1) On resistance vs. ambient temperature characteristics 3.-(2) On resistance vs. ambient temperature characteristics 4.-(1) Turn on time vs. ambient temperature characteristics (AC/DC type) LED current: 10 mA; Continuous load current: 1.2 A (DC) (AQZ202), 0.8 A (DC) (AQZ205), 1.6 A (DC) (AQZ102), 1.04 A (DC) (AQZ105) LED current: 10 mA; Continuous load current: 0.4 A (DC) (AQZ207), 0.2 A (DC) (AQZ204), 0.52 A (DC) (AQZ107), 0.28 A (DC) (AQZ104) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 0.5 10 5.0 AQZ205 0.3 0.2 AQZ202 4.0 3.0 2.5 2.0 AQZ104 1.5 0.1 0 -40 -20 AQZ105 1.0 AQZ102 0.5 0 0 20 40 60 80 85 Ambient temperature, C 8 AQZ204 3.5 Turn on time, ms 0.4 On resistance, On resistance, 4.5 AQZ207 6 AQZ202 4 AQZ205 AQZ204 2 AQZ207 AQZ107 -40 -20 0 0 20 40 60 80 85 Ambient tempereture, C -40 -20 0 20 40 60 80 85 Ambient tempereture, C 4.-(2) Turn on time vs. ambient temperature characteristics (DC type) 5.-(1) Turn off time vs. ambient temperature characteristics (AC/DC type) 5.-(2) Turn off time vs. ambient temperature characteristics (DC type) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 8 0.8 0.8 6 4 AQZ102 AQZ105 AQZ107 AQZ104 2 Turn off time, ms 1.0 Turn off time, ms 1.0 Turn on time, ms 10 0.6 0.4 0.6 0.4 AQZ107 AQZ105 AQZ102 AQZ205 AQZ207 0.2 0.2 AQZ202 0 -40 -20 AQZ204 0 -40 -20 0 20 40 60 80 85 Ambient tempereture, C 0 20 40 60 80 85 Ambient tempereture, C 0 -40 -20 AQZ104 0 20 40 60 80 85 Ambient temperature, C 6.-(1) LED operate vs. ambient temperature characteristics (AC/DC type) 6.-(2) LED operate vs. ambient temperature characteristics (DC type) 7.-(1) LED turn off current vs. ambient temperature characteristics (AC/DC type) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) 3 AQZ204 2 AQZ202 AQZ207 1 610 AQZ205 -40 -20 0 20 40 60 80 85 Ambient temperature, C 4 3 AQZ105 AQZ104 AQZ107 2 AQZ102 1 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C LED turn off current, mA 4 0 5 5 LED operate current, mA LED operate current, mA 5 4 3 AQZ202 AQZ207 2 AQZ205 1 0 AQZ204 -40 -20 0 20 40 60 8085 Ambient temperature, C AQZ10, 20 7.-(2) LED turn off current vs. ambient temperature characteristics (DC type) 8. LED dropout voltage vs. ambient temperature characteristics 9.-(1) Voltage vs. current characteristics of output at MOS portion (AC/DC type) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Sample: all types; LED current: 5 to 50 mA Ambient temperature: 25C 77F 3 AQZ105 AQZ104 AQZ107 2 1 1.4 1.3 1.2 9.-(2) Voltage vs. current characteristics of output at MOS portion (DC type) AQZ202 AQZ205 AQZ207 AQZ204 0 0.5 1.0 1.5 2.0 -1.0 Voltage, V -2.0 -3.0 0 -40 -20 -4.0 0 20 40 60 8085100 Ambient temperature, C 10. Off state leakage current 11.-(1) LED forward current vs. turn on time characteristics (AC/DC type) Ambient temperature: 25C 77F Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 4 AQZ105 2 AQZ107 AQZ104 1 -0.8 -0.6 -0.4 -0.2 0.2 0.4 0.6 0.8 Voltage, V -1 -2 20 10-3 18 16 10 -6 10-9 AQZ104, AQZ204 AQZ105, 205 Turn on time, ms AQZ102 3 Off state leakage current, A Current, A 2.0 50mA 30mA 20mA 10mA 5mA 1.1 0 20 40 60 80 85 Ambient temperature, C 3.0 1.0 -2.0 -1.5 -1.0 -0.5 1.0 AQZ102 -40 -20 Current, A 4 0 4.0 1.5 LED dropout voltage, V LED turn off current, mA 5 AQZ107, AQZ207 -3 -4 0 12 10 AQZ202 AQZ205 8 6 4 AQZ102, 202 10-12 14 AQZ204 AQZ207 2 50 Load voltage, V 0 100 0 10 20 30 40 50 LED forward current, mA 11.-(2) LED forward current vs. turn on time characteristics (DC type) 12.-(1) LED forward current vs. turn off time characteristics (AC/DC type) 12.-(2) LED forward current vs. turn off time characteristics (DC type) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 20 0.5 0.5 0.4 0.4 Turn off time, ms Turn on time, ms 16 14 12 10 8 AQZ104 AQZ107 6 4 0 0 10 AQZ205 0.2 AQZ207 AQZ202 AQZ204 0 20 30 40 50 LED forward current, mA 0.3 0.2 AQZ105 AQZ102 AQZ104 AQZ107 0.1 0.1 AQZ102 AQZ105 2 0.3 Turn off time, ms 18 0 10 0 20 30 40 50 LED forward current, mA 0 10 20 30 40 50 LED forward current, mA 13.-(2) Load voltage vs. turn on time characteristics (Load voltage: 200, 400 V type) 14.-(1) Load current vs. turn on time characteristics (Load voltage: 60, 100 V type) LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F 5 5 4 4 4 3 AQZ202 2 1 AQZ102 AQZ205 AQZ105 Turn on time, ms 5 Turn on time, ms Turn on time, ms 13.-(1) Load voltage vs. turn on time characteristics (Load voltage: 60, 100 V type) 3 2 AQZ205 3 AQZ202 AQZ102 2 AQZ105 AQZ204 AQZ207 AQZ107 1 1 AQZ104 0 0 10 20 30 40 50 60 70 80 90 100 Load voltage, V 0 0 50 100 150 200 250 300 350 400 Load voltage, V 0 0 0.5 1.0 1.5 2.0 2.5 Load current, A 3.0 611 AQZ10, 20 15.-(1) Load voltage vs. turn off time characteristics (Load voltage: 60, 100 V type) 15.-(2) Load voltage vs. turn off time characteristics (Load voltage: 200, 400 V type) LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F 0.5 0.5 4 0.4 0.4 3 AQZ204 2 0.3 AQZ202 0 0.3 0.2 AQZ105 AQZ207 AQZ102 0.1 AQZ104 AQZ205 0.2 AQZ207 AQZ107 1 Turn off time, ms 5 Turn off time, ms Turn on time, ms 14.-(2) Load current vs. turn on time characteristics (Load voltage: 200, 400 V type) AQZ104 0.1 AQZ204 AQZ107 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Load current, A 0 0 10 20 30 40 50 60 70 80 90 100 Load voltage, V 0 50 100 150 200 250 300 350 400 Load voltage, V 16.-(1) Load current vs. turn off time characteristics (Load voltage: 60, 100 V type) 16.-(2) Load current vs. turn off time characteristics (Load voltage: 200, 400 V type) 17. Maximum operating frequency vs. load voltage/current characteristics LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F LED current: 10 mA; Ambient temperature: 25C 77F 0.5 0.4 Turn off time, ms Turn off time, ms 0.4 0.3 AQZ202 0.2 AQZ205 0.5 1.0 0.2 1.5 2.0 2.5 Load current, A AQZ207 0.1 AQZ102 0 0.3 AQZ105 0.1 0 Maximum operating frequency, time/s 0.5 0 3.0 AQZ104 AQZ204 AQZ107 18.-(2) Applied voltage vs. output capacitance characteristics (DC type) Frequency: 1 MHz; Ambient temperature: 25C 77F Frequency: 1 MHz; Ambient temperature: 25C 77F 2000 1800 1800 Output capacitance, pF Output capacitance, pF 18.-(1) Applied voltage vs. output capacitance characteristics (AC/DC type) 1600 1400 1200 1000 800 AQZ202 600 AQZ205AQZ207 400 AQZ204 0 8 7 6 5 4 3 2 1 0 25 50 75 100 125 150 175 200 Load voltage, Vx load currnt, A 1600 1400 AQZ102 1200 1000 AQZ105 800 600 AQZ107 400 200 Duty factor = 50% 9 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Load current, A 2000 10 AQZ104 200 0 20 40 60 80 Applied voltage, V 0 100 0 20 40 60 80 Applied voltage, V 100 ACCESSORY mm inch PC board pattern (BOTTOM VIEW) Standard type Socket 1 2 3 4 5 6 5+0.2 -0.6 .197.008 -.024 1 0.5 .020 0.8 .031 2.54 .100 6.35 .250 PA1a-PS 612 9/1/2000 3 4 5 6 5+0.2 -0.6 .197.008 -.024 22.60.6 .890.024 22.60.6 .890.024 4 .157 2 3.81 .150 2.54 .100 90.6 .354.024 90.6 .354.024 5.30.6 .209.024 5.30.6 .209.024 (0.3) (.012) 5.08 .200 0.25 .010 1.23 .048 3.9 10.25 .154 .039.010 1.23 .048 0.5 .020 2.54 .100 6.35 .250 0.8 .031 3.81 .150 PA1a-PS-H (0.3) (.012) 5.08 .200 10.16 .400 5.08 .200 2-1 dia. 2-.039 dia. 2-1.2 dia. 2-.047 dia. Self clinching type 2.54 .100 1.30.15 .051.006 10.16 .400 2-0.80.25 dia. 2-.031002 dia. 5.08 .200 2-1.20.05 dia. 2-.047002 dia. Tolerance: 0.1 .004 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog