GBU8005 - GBU810 8.0A GLASS PASSIVATED BRIDGE RECTIFIER Features * * * * * * * Glass Passivated Die Construction High Case Dielectric Strength of 1500VRMS GBU Low Reverse Leakage Current Surge Overload Rating to 200A Peak Ideal for Printed Circuit Board Applications A B UL Listed Under Recognized Component Index, File Number E94661 K M C Lead Free Finish, RoHS Compliant (Note 4) L - Mechanical Data * * Case: GBU * * Moisture Sensitivity: Level 1 per J-STD-020C * * * * * * ~ ~ + D E F Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 J N G Terminals: Finish 3/4 Tin. Solderable per MIL-STD-202, Method 208 e3 Min Max A 21.8 22.3 B 3.5 4.1 C 7.4 7.9 D 1.65 2.16 E 2.25 2.75 2.35 F 1.95 G 1.02 1.27 H 4.83 5.33 J 17.5 18.0 3.2 X 45 K P H Polarity: Marked on Body Dim Mounting: Through Hole for #6 Screw Mounting Torque: 5.0 Inch-pounds Maximum L 18.3 18.8 M 3.30 3.56 N 0.46 0.56 P 0.76 1.0 All Dimensions in mm Ordering Information: See Last Page Marking: Date Code and Type Number Weight: 6.6 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol GBU 8005 GBU 801 GBU 802 GBU 804 GBU 806 GBU 808 GBU 810 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Forward Rectified Current (Note 1) @ TC = 100C I(AV) 8.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 200 A Forward Voltage (per element) VFM 1.0 V IR 5.0 500 mA I2 t 166 A2 s Peak Reverse Current at Rated DC Blocking Voltage @ IF = 4.0A @ TC = 25C @ TC = 125C I2t Rating for Fusing (t < 8.3ms) (Note 2) Typical Total Capacitance per Element (Note 3) Typical Thermal Resistance Junction to Case (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. CT 130 pF RqJC 2.2 C/W Tj, TSTG -55 to +150 C Unit mounted on 50 x 50 x 1.6mm copper plate heatsink. Non-repetitive, for t > 1.0ms and < 8.3ms. Per element, measured at 1.0MHz and applied reverse voltage of 4.0V DC. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS21227 Rev. 7 - 2 1 of 3 www.diodes.com GBU8005 - GBU810 a Diodes Incorporated Resistive or Inductive Load 8 With heatsink 6 4 Without heatsink 2 0 0 50 100 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 10 100 Tj = 25 C 10 1.0 0.1 0.0 150 250 1.0 1.4 1000 200 Single Half-Sine Wave 100 1.8 Tj = 25 C f = 1.0MHz 100 Tj = 25 C 0 1 10 10 0.1 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current Ordering Information Notes: 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TC, CASE TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 0.2 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance, per element (Note 5) Device Packaging Shipping GBU8005 GBU 20/Tube GBU801 GBU 20/Tube GBU802 GBU 20/Tube GBU804 GBU 20/Tube GBU806 GBU 20/Tube GBU808 GBU 20/Tube GBU810 GBU 20/Tube 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS21227 Rev. 7 - 2 2 of 3 www.diodes.com GBU8005 - GBU810 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21227 Rev. 7 - 2 3 of 3 www.diodes.com GBU8005 - GBU810