Individual lot quantities are bulk packed in
anti-static resealable bags.
PACKAGING
STATE OF THE ART, INC.STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-17972470 Fox Hill Road, State College, PA 16803-1797
Phone (814) 355-8004 Fax (814) 355-2714Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401Toll Free 1-800-458-3401
Where Quality Isn't a Goal...It's Our TraditionWhere Quality Isn't aGoal...It's Our Tradition
SOTA offers a full line of thick and thin film resistive products including;
Surface mount, wire bondable, silicon, and Mil-PRF-55342 chip resistors qualified
to "S" and "T" (Space level) failure rate. Surface mount resistor networks, Mil-PRF-914
resistor networks, and custom thick and thin film circuits.
OPTIONS
Pretinned Ni Barrier
Terminations
Packaging options: Waffle Pack, Tape & Reel
SIZE
CODE
S0302CPX
S0402CPX
S0403CPX
S0404CPX
S0502CPX
S0504CPX
S0505CPX
S0603CPX
S0703CPX
S0705CPX
S1003CPX
S1005CPX
S1010CPX
S1206CPX
S1505CPX
S2010CPX
S2208CPX
S2512CPX
.032 x .022
.042 x .022
.045 x .032
.042 x .037
.052 x .025
.052 x .038
.052 x .048
.062 x .032
.075 x .030
.075 x .048
.100 x .030
.100 x .048
.101 x .095
.126 x .061
.150 x .048
.202 x .094
.225 x .070
.250 x .119
.012
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.015
.020
.025
.025
.025
LxW
(inches)
Case
Thickness
(inches)
Power
Ratings
(watts)
12/15/05
Thick Film Jumpers
0.035
0.050
0.050
0.050
0.060
0.125
0.125
0.100
0.150
0.200
0.200
0.250
0.500
0.250
0.330
1.000
0.750
2.000
0.020
0.025
0.020
0.020
0.020
0.025
0.025
0.025
0.025
0.020
0.040
0.025
0.025
0.025
0.035
0.040
0.040
0.040
Maximum
Resistance
(ohms)
Current
Rating
(amps)
1.0
1.0
1.5
1.5
1.5
2.0
2.0
2.0
2.5
3.0
2.0
3.0
4.0
3.0
3.0
5.0
4.0
6.0
For circuits with a small number of crossovers, a jumper chip can be more
econonmical than printing a dielectric layer and crossover conductor or
using a thru-hole. Thick film Jumpers are the available in 18 sizes, all with
wraparound terminations and glass passivation for conductive epoxy
bonding, and the CPX style has pretinned nickel barrier terminations for
solder applications. Operating Temperature Range -55° - 150°C.
SIZES and RATINGSSIZES and RATINGS
To order, specify the size of the resistor, followed by the termination style. The part number specifies a standard
production .050 x .025 inch jumper with pretinned nickel barrier wraparound terminations. CP - Untinned for epoxy attachment.
CPX - Pretinned for solder attachment. 000 - (zero ohm)jumper.
5# +2:
Please refer to standard grade data sheets for mechanicals.
