LITE-ON SEMICONDUCTOR MBRF20150CT REVERSE VOLTAGE - 150 Volts FORWARD CURRENT - 20 Amperes SCHOTTKY BARRIER RECTIFIERS ITO-220AB FEATURES A D 2 3 3.60 14.22 G H J H N H L PIN 1 PIN 2 PIN 3 13.46 1.15 2.40 MAX. 16.50 10.40 3.50 1.70 2.70 1.00 0.70 3.00 3.30 L 4.36 4.77 2.48 M 2.80 2.80 2.50 N All Dimensions in millimeter I J K I Case : ITO-220AB molded plastic Polarity : As marked on the body Weight : 0.06 ounces, 1.70 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) 9.30 F G MECHANICAL DATA 9.00 2.90 F E IEC 61000-4-2, level 4 (ESD), >15KV (air) D E DIM. PIN 1 A B C ITO-220AB MIN. 15.50 10.0 3.00 M B K C Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency Low leakage current High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 0.75 0.45 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage MBRF20150CT UNIT VRRM VRMS VDC 150 105 150 V V V I(AV) 20 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 180 A Voltage Rate of Change (Rated VR) dv/dt 10000 V/us TJ =25 C TJ =125 C TJ =25 C TJ =125 C VF 0.92 0.75 1.00 0.86 V @TJ =25 C @TJ =125 C IR 8 5 uA mA R0JC 2.5 C/W CJ 250 pF TJ, TSTG -65 to +175 Vdis 2000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (See Fig.1) Maximum Forward Voltage (Note 1) IF=10A @ IF=10A @ IF=20A @ IF=20A @ Maximum DC Reverse Current at Rated DC Blocking Voltage TC =120 C Typical Thermal Resistance (Note 2) Typical Junction Capacitance per element (Note 3) Operating Junction and Storage Temperature Range Dielectric Strengh from terminals to case, AC with t=1 minute, RH<30% NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Device mounted on 226 x114 x 8mm Alumium plate 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. REV. 3, Jul-2012, KTHC31 RATING AND CHARACTERISTIC CURVES MBRF20150CT FIG.2 - MAXIMUM NONREPETITIVE SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT , AMPERES AVERAGE FORWARD CURRENT , AMPERES 25.0 20.0 15.0 10.0 5.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 125 150 250 200 150 100 50 8.3 ms Single Half-Sine-Wave 0 1 175 2 5 20 50 100 NUMBER OF CYCLES AT 60Hz TEMPERATURE , FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT , AMPERES 100 1.0 TJ =125 0.1 0.01 0.001 TJ =25 TJ =25 Pule Width=300us 2% Duty Cycle 10 1.0 0.1 0.0001 0.1 0 30 60 90 120 150 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 180 INSTANTANEOUS FORWARD VOLTAGE , VOLTS REVERSE VOLTAGE , VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 800 f=1MHz 500 CAPACITANCE , (PF) INSTANTANEOUS REVERSE CURRENT , (mA) 10 TJ =25 200 100 50 20 10 0.1 1 4 10 REVERSE VOLTAGE , VOLTS 100 1.1 Legal Disclaimer Notice MBRF20150CT Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.