19-0028; Rev 4; 5/10 Monolithic CMOS Analog Multiplexers Maxim's DG508A and DG509A are monolithic CMOS analog multiplexers (muxes): the DG508A is a single 8-channel (1-of-8) mux, and the DG509A is a differential 4-channel (2-of-8) mux. Both devices guarantee break-before-make switching. Maxim guarantees these muxes will not latch up if the power supplies are turned off with the input signals still present. Maxim also guarantees continuous operation when these devices are powered by supplies ranging from 4.5V to 18V. The DG508A/DG509A are plug-in upgrades for the industry-standard DG508A/DG509A, respectively. Maxim's parts have faster enable switching times and significantly lower leakage currents. The DG508A/ DG509A also consume significantly lower power, making them ideal for portable equipment. Applications Features Improved Second Source Operate from 4.5V to 18V Supplies Symmetrical, Bidirectional Operation Logic and Enable Inputs, TTL and CMOS Compatible Latchup-Proof Construction Monolithic, Low-Power CMOS Design Ordering Information PART DG508ACJ TEMP RANGE PIN-PACKAGE 0C to +70C 16 Plastic DIP DG508ACWE 0C to +70C 16 Wide SO DG508AC/D 0C to +70C Dice* DG508ABK -20C to +85C 16 CERDIP Control Systems DG508ADJ -40C to +85C 16 Plastic DIP Data Logging Systems DG508ADY -40C to +85C 16 Narrow SO Aircraft Heads-Up Displays DG508AEWE -40C to +85C 16 Wide SO Data-Acquisition Systems DG508AAK -55C to +125C 16 CERDIP DG508AMY/PR -55C to +125C 16 Narrow SO 0C to +70C 16 Plastic DIP Signal Routing DG509ACJ Typical Operating Circuits -15V V+ GND VS1 S2 S3 DG508A S4 D S5 S6 S7 S8 A0 A1 A2 EN ANALOG INPUT (OUTPUTS) +15V V+ CLOCK IN N.C. BIN -15V ANALOG OUTPUT (INPUTS) QB QC QD AIN Q r01 r02 GND A DG509ACWE 0C to +70C 16 Wide SO DG509AC/D 0C to +70C Dice* DG509ABK -20C to +85C 16 CERDIP DG509ADJ -40C to +85C 16 Plastic DIP DG509ADY -40C to +85C 16 Narrow SO DG509AEWE -40C to +85C 16 Wide SO DG509AAK -55C to +125C 16 CERDIP DG509AMY/PR -55C to +125C 16 Narrow SO Devices are available in a lead(Pb)-free/RoHS-compliant package (except CERDIP). Specify lead-free by adding a plus (+) to the part number when ordering. *Contact factory for dice specifications. N.C. +15V ENABLE IN (MUX ON/OFF CONTROL) 8-CHANNEL SEQUENTIAL MUX/DEMUX Typical Operating Circuits continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 DG508A/DG509A General Description DG508A/DG509A Monolithic CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ .....................................................................................+44V GND ................................................................................. +25V Digital Inputs, VS and VD (Note 1)...................-2V to (V+ + 2V) or 20mA, whichever occurs first Current (any terminal, except S or D) .................................30mA Continuous Current, S or D .................................................20mA Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) ..40mA Continuous Power Dissipation (TA = +70C) Plastic DIP (derate 10.53mW/C above +70C) ...........842mW Narrow SO (derate 8.70mWIC above +70C) .............696mW Wide SO (derate 9.52mW/C above +70C).................762mW CERDIP (derate 10.00mW/C above +70C) ................800mW Operating Temperature Ranges: DG50_ACJ/CWE ..................................................0C to +70C DG50_ABK........................................................-20C to +85C DG50_ADJ/DY/EWE..........................................-40C to +85C DG50_AAK/MY ...............................................-55C to +125C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Soldering Temperature (reflow) PDIP, Wide SO, Narrow SO, CERDIP containing lead(Pb)..+240C PDIP, Wide SO, Narrow SO lead(Pb)-free ....................+260C Note 1: Signals on S_ or D_ exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current ratings Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (V+ = 15V, V- = -15V, VGND = 0V, TA = +25C, unless otherwise noted.) PARAMETER SYMBOL DG508AA/M DG509AA/M CONDITIONS MIN SWITCH Analog Signal Drain-Source OnResistance Greatest Change in Drain-Source On-Resistance Between Channels Source OffLeakage Current Drain Off- DG508A Leakage Current DG509A Drain On- DG508A Leakage Current DG509A 2 -15 VANALOG RDS(ON) RDS(ON) TYP Sequence each switch on, VA_L = 0.8V, VA_H = 2.4V (Note 4) DG508AD/E/B/C DG509AD/E/B/C MAX MIN +15 -15 TYP UNITS MAX +15 VD = 10V, I S = -200A 170 400 170 450 VD = -10V, I S = 200A 130 400 130 450 V RDS(ON) max RDS(ON) min RDS(ON) = RDS(ON) 6 6 % -10V VS 10V I S(OFF) VEN = 0V VS = 10V, VD = -10V VS = -10V, VD = 10V 0.002 -0.5 -0.005 -2 -0.015 VD = 10V, VS = -10V ID(OFF) VEN = 0V VD = -10V, VS = 10V VD = 10V, VS = -10V VD = -10V, VS = 10V ID(ON) Sequence each switch on, VA_L = 0.8V VA_H = 2.4V (Note 2) 0.01 0.005 -2 VS(all) = VD = 10V VS(all) = VD = -10V VS(all) = VD = 10V VS(all) = VD = -10V -2 -0.015 -1 -0.005 -5 -0.015 0.01 2 0.005 -5 2 -0.03 0.007 0.002 2 -0.008 0.015 -2 0.5 2 5 5 nA 5 -0.03 0.007 -5 nA -0.008 0.015 -5 1 -0.015 _______________________________________________________________________________________ 5 nA Monolithic CMOS Analog Multiplexers DG508A/DG509A ELECTRICAL CHARACTERISTICS (continued) (V+ = 15V, V- = -15V, VGND = 0V, TA = +25C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS DG508AA/M DG509AA/M MIN TYP -10 - DG508AD/E/B/C DG509AD/E/B/C MAX MIN TYP 10 -0.002 UNITS MAX LOGIC INPUT Logic Input Current, Input Voltage High IAH Logic Input Current, Input Voltage Low IAL VA_ = 2.4V VA_ = 15V All VA_ = 0V 0.006 10 0.006 VEN = 2.4V -10 - 10 -0.002 VEN = 0V -10 - -10 -0.002 10 A A DYNAMIC Multiplexer Switching t transition Figure 1 0.6 t OPEN Figure 3 0.2 Enable Turn-On Time t ON(EN) Figure 2 0.4 1.0 0.4 1.5 s Enable Turn-Off Time t OFF(EN) Figure 2 0.2 0.7 0.2 1.0 s VEN = 0V, RL = 1k, CL = l5pF, VS = 7VRMS f = 500kHz (Note 3) 68 68 dB CS(OFF) VS = 0V, VEN = 0V, f = 140kHz 5 5 pF CD(OFF) VS = 0V, VEN = 0V, f = 140kHz 25 25 12 12 Positive Supply Current I+ VEN = 2.4V, all VA_ = 0V or 2.4V Negative Supply Current I- VEN = 2.4V, all VA_ = 0V or 2.4V Positive Supply Current in Standby I+ VEN = 0V, all VA_ = 0V or 2.4V Negative Supply Current in Standby I- VEN = 0V, all VA_ = 0V or 2.4V Power-Supply Range for Continuous Operation V-, V+ Break-Before-Make Interval Off-Isolation OIRR Source Off-Capacitance Drain OffCapacitanc e SUPPLY IDG508A DGS09A (Notes 4, 5) 0.02 -0.1 4.5 -0.01 0.6 1. 0 0.2 0.2 -0.01 0.02 -0.1 1. 0 0.02 -0.1 0.2 -0.1 18.0 4.5 s pF 0.2 -0.01 0.02 s mA mA 0.2 -0.01 mA mA 18.0 V _______________________________________________________________________________________ 3 DG508A/DG509A Monolithic CMOS Analog Multiplexers ELECTRICAL CHARACTERISTICS (V+ = 15V, VGND = 0V, TA = TMIN to TMAX, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS DG508AA/M DG509AA/M MIN TYP DG508AD/E/B/C DG509AD/E/B/C MAX MIN +15 -15 TYP UNITS MAX SWITCH Analog Signal Range Drain-Source OnResistance Source Off-Leakage Current Drain OffLeakage Current Drain OnLeakage Current VANALOG RDS(ON) I S(OFF) -15 Sequence each switch on, VA_L = 0.8V, VA_H = 2.4V VEN = 0V DG508A ID(OFF) VEN = 0V DG509A VD = 10V, I S = -200A 500 550 VD = -10V, I S = 200A 500 550 VS = 10V, VD = -10V ID(ON) DG509A +50 -50 VD = -10V, VS = -10V -200 -100 +100 nA -100 +200 -200 +100 -100 nA VS(all) = VD = 10V VS(all) = VD = -10V nA +100 -200 +200 VS(all) = VD = 10V VS(all) = VD = -10V +50 -50 +200 VD = 10V, VS = -10V Sequence each switch on, VA_L = 0.8V, VA_H = 2.4V (Note 2) V VS = -10V, VD = -10V VD = 10V, VS = -10V VD = -10V, VS = -10V DG508A +15 +100 -100 +100 -100 LOGIC INPUT Logic Input Current, Input Voltage High IAH Logic Input Current, Input Voltage Low IAL VA_ = 2.4V -30 VA_ = 15V All VA_ = 0V -30 +30 +30 VEN = 2.4V -30 -30 VEN = 0V -30 -30 A A Note 2: ID(ON) is leakage from driver into on switch. Note 3: Off-isolation = 20log IVSI IVDI VS = input to off switch, VD = output due to VS. Note 4: Electrical characteristics (such as on-resistance) change when power supplies other than 15V are used. Note 5: For designs requiring single 5V or dual 5V operation, refer to Maxim's improved MAX338 and MAX339. Minimum operating voltage for DG508ADY/MY and DG509ADY/MY is 9V. 4 _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers Pin Descriptions PIN TOP VIEW NAME FUNCTION DG508A DG509A DIP/SO DIP/SO 1, 15, 16 -- A0, A2, A1 13 V+ -- 1, 16 A0, A1 S2 5 12 S5 2 2 EN Enable S3 6 11 S6 3 3 V- S4 7 10 S7 Negative-Supply Voltage Input 4-7 -- S1-S4 Analog Inputs, Bidirectional -- 4-7 S1A-S4A Analog Inputs, Bidirectional 8 -- D Analog Outputs, Bidirectional -- 8, 9 DA, DB Analog Outputs, Bidirectional 9-12 -- S8-S5 Analog Inputs, Bidirectional -- 10-13 S4B-S1B Analog Inputs, Bidirectional 13 14 V+ 14 15 GND A0 1 16 A1 EN 2 15 A2 V- 3 14 GND S1 4 DG508A 9 D 8 S8 A0 1 16 A1 EN 2 15 GND V- 3 14 V+ S1A 4 DG509A 13 S1B S2A 5 12 S2B S3A 6 11 S3B S4A 7 10 S4B DA 8 9 DB DIP/SO Address Input Address Input Positive-Supply Voltage Input Ground Functional Diagrams V+ V- GND V+ S1 S1A S2 S2A S3 S3A S4 D S1B S6 S2B S7 S3B S8 S4B A2 A1 A0 GND DA S4A S5 DG508A CMOS DECODE LOGIC V- DB DG509A CMOS DECODE LOGIC EN DG508A 8-CHANNEL SINGLE ENDED MULTIPLEXER A1 A0 EN DG509A DIFFERENTIAL 4-CHANNEL MULTIPLEXER _______________________________________________________________________________________ 5 DG508A/DG509A Pin Configurations DG508A/DG509A Monolithic CMOS Analog Multiplexers +2.4V +2.4V +15V V+ EN S1 +15V V+ 10V EN S1 10V DG509A S1A-S4A, DA, S2B, S3B S2-S7 DG508A A0 S8 A1 A2 LOGIC INPUT D GND V1M 50 S4B A0 SWITCH OUTPUT VD 35pF A1 LOGIC INPUT DB GND V1M 50 SWITCH OUTPUT VDS 35pF -15V -15V Figure 1a. Switching-Time Test Circuit Figure 1b. Switching-Time Test Circuit +15V +15V V+ EN V+ S1 -5V EN S1B -5V DG509A S1A-S4A, DA, S2B, S3B S2-S7 DG508A A0 A0 A1 A2 LOGIC INPUT D GND V1k 50 35pF -15V Figure 2a. DG508A Enable-Time Test Circuit 6 SWITCH OUTPUT VD A1 LOGIC INPUT DB GND V1k 50 SWITCH OUTPUT VDS 35pF -15V Figure 2b. DG509A Enable-Time Test Circuit _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers +15V 3V 50% 0 EN VS1 DG508A DG509A LOGIC INPUT DG508A/DG509A +2.4V LOGIC INPUT tr < 20ns tf < 20ns A0, A1, (A2) GND ALL S AND DA SWITCH OUTPUT VD (SEE FIG. 1) TRANSITION TIME +5V SWITCH OUTPUT VD DB, D V- 0 0.8VS8 VS8 ttransition S1ON 1k 50 0.8VS1 S8ON ttransition tON (EN) 35pF -15V tOFF (EN) 0 SWITCH 0.1V0 OUTPUT VD (SEE FIG. 2) TENABLE t(ON) t(OFF) TIME 0.9V0 V0 VS Figure 3. Break-Before-Make Test Circuit SWITCH OUTPUT VD (SEE FIG. 3) OPEN TIME (B.B.M INTERVAL) VS 50% 0V topen Figure 4. Timing Diagram for Figures 1, 2, and 3 Table 1a. DG508A Truth Table Table 1b. DG509A Truth Table EN ON SWITCH A1 A0 X 0 NONE X 0 1 1 0 A2 A1 A0 X X 0 0 EN ON SWITCH X 0 NONE 0 1 1 1 1 2 0 0 1 1 2 0 0 1 0 1 3 1 0 1 3 0 1 1 1 4 1 1 1 4 1 0 0 1 5 X = Don't care. 1 0 1 1 6 1 1 0 1 7 1 1 1 1 8 X = Don't care. _______________________________________________________________________________________ 7 Monolithic CMOS Analog Multiplexers DG508A/DG509A Typical Operating Circuits (continued) -15V -15V V+ GND VS1A S2A DA S3A S4A DG509A S1B DB S2B S3B S4B A0 A1 EN DIFFERENTIAL ANALOG INPUTS (OUTPUTS) DIFFERENTIAL ANALOG OUTPUTS (INPUTS) Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE DOCUMENT NO. 16 Plastic DIP P16-1 21-0043 16 Wide SO W16-2 21-0042 16 Narrow SO S16-5 21-0041 16 CERDIP J16-3 21-0045 +15V CLOCK IN Q J 1/2MM747C73 CLOCK Q J 1/2MM747C73 CLOCK Q K N.C. K Q CLEAR GND RESET ENABLE DIFFERENTIAL 4-CHANNEL SEQUENTIAL MUX/DEMUX 8 _______________________________________________________________________________________ Monolithic CMOS Analog Multiplexers REVISION NUMBER REVISION DATE DESCRIPTION Updated the "Drain-Source On-Resistance" parameter for both the TA = +25C and TA = TMIN to TMAX conditions. 4 5/10 PAGES CHANGED 2, 4 Deleted the QFN package from the Ordering Information, Absolute Maximum Ratings, Pin Configurations, Pin Descriptions, and Package Information sections. 1, 2, 5, 8 Added the DG508AMY/PR and DG509AMY/PR parts to the Ordering Information table. 1 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 9 (c) 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc. DG508A/DG509A Revision History